openwrtv3/target/linux/ar71xx/image
Piotr Dymacz 650a5e993b ar71xx: add support for COMFAST CF-E385AC
COMFAST CF-E385AC is an AC2200 ceiling mount AP with PoE support, based
on Qualcomm/Atheros QCA9558 + QCA9984 + QCA8337N.

Specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 256 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100/1000 Mbps Ethernet, with PoE support
- 3T3R 2.4 GHz (QCA9558), with external LNA and PA (SE2576L)
- 4T4R 5 GHz (QCA9984), with external FEM (SKY85728-11)
- 7x internal antennas
- 1x RGB LED (driven by GPIO)
- 1x button (reset)
- UART, LEDs/GPIO and USB headers on PCB
- external watchdog (Pericon Technology PT7A7514)

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-22 18:53:22 +01:00
..
lzma-loader ar71xx: fix lzma-loader build with glibc 2017-12-13 11:34:51 +01:00
common-tp-link.mk ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
generic-legacy-devices.mk ar71xx: image: move Sitecom WLR-8100 from legacy to generic 2018-01-15 00:12:13 +01:00
generic-senao.mk ar71xx: image: rework EnGenius ENS202EXT factory image 2018-01-15 13:39:54 +01:00
generic-tp-link.mk ar71xx: add support for TP-Link RE355 2018-02-13 09:21:20 +01:00
generic-ubnt.mk ar71xx: remove bs-partition ro-flag for UniFi AC 2018-02-11 16:16:03 +01:00
generic.mk ar71xx: add support for COMFAST CF-E385AC 2018-02-22 18:53:22 +01:00
legacy.mk build: replace uses of OpenWrt with $(VERSION_DIST) 2018-02-05 10:15:53 +01:00
Makefile ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
mikrotik.mk ar71xx: fix MikroTik rb-nor-flash-16M-ac image 2018-01-24 01:24:39 +01:00
nand.mk ar71xx: add support for Nokia WI2A-AC200i 2017-10-19 12:27:42 +02:00
tiny-legacy-devices.mk ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
tiny-tp-link.mk ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
ubinize-nbg6716.ini ar71xx: nbg6716: Enable procd nand sysupgrage 2014-06-26 11:43:38 +00:00
ubinize-wndr4300.ini ar71xx: remove old jffs2 marker from image generation on nand targets 2014-06-24 18:14:18 +00:00