openwrtv3/target/linux/ar71xx
Piotr Dymacz 650a5e993b ar71xx: add support for COMFAST CF-E385AC
COMFAST CF-E385AC is an AC2200 ceiling mount AP with PoE support, based
on Qualcomm/Atheros QCA9558 + QCA9984 + QCA8337N.

Specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 256 MB of RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2x 10/100/1000 Mbps Ethernet, with PoE support
- 3T3R 2.4 GHz (QCA9558), with external LNA and PA (SE2576L)
- 4T4R 5 GHz (QCA9984), with external FEM (SKY85728-11)
- 7x internal antennas
- 1x RGB LED (driven by GPIO)
- 1x button (reset)
- UART, LEDs/GPIO and USB headers on PCB
- external watchdog (Pericon Technology PT7A7514)

Flash instruction:

Original firmware is based on OpenWrt.
Use sysupgrade image directly in vendor GUI.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2018-02-22 18:53:22 +01:00
..
base-files ar71xx: add support for COMFAST CF-E385AC 2018-02-22 18:53:22 +01:00
files ar71xx: add support for COMFAST CF-E385AC 2018-02-22 18:53:22 +01:00
generic ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2 2018-02-22 18:53:22 +01:00
image ar71xx: add support for COMFAST CF-E385AC 2018-02-22 18:53:22 +01:00
mikrotik ar71xx: reorganize kernel configuration 2018-01-13 19:54:45 +01:00
nand ar71xx: reorganize kernel configuration 2018-01-13 19:54:45 +01:00
patches-4.4 ar71xx: disable 40Mhz refclk for QCA953x 2018-02-22 18:53:22 +01:00
patches-4.9 ar71xx: disable 40Mhz refclk for QCA953x 2018-02-22 18:53:22 +01:00
tiny ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
config-4.4 ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2 2018-02-22 18:53:22 +01:00
config-4.9 ar71xx: add support for WHQX E1700AC/E600G/E600GAC v2 2018-02-22 18:53:22 +01:00
Makefile ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
modules.mk ar71xx: add LED driver NU801 2015-12-11 15:04:57 +00:00