openwrtv3/target/linux/ath79/dts
Daniel F. Dickinson 4b93cbd172 ath79: Port PowerCloud Systems CR5000 support
Add ath79 arch support for PowerCloud Systems CR5000.  Previously
supported under ar71xx (however there are some errors in that support;
to be fixed shortly).

Info:

* This board is based on the Atheros DB120 reference design, but doesn't
  use the on-board switch.  Instead it attachs GMAC0 to an AR8327 switch.
* It only uses GMAC0 and the WAN is simply a VLAN in the stock firmware.
* It has 64MB RAM and 8MB flash.
* In the dts version we get rid of using 'open-drain' for the AR8327
  LED controls.
* As with the platform data version we disable JTAG as this conflicts
  with one of the pair of GPIO's required for the power/status LED
  (GPIO2 and GPIO4 are used for this LED).
* The pcie card wifi has an EEPROM but gets it's MAC address from
  the ART partition.
* The SoC wifi (2.4 GHz) is all from the ART.
* The USB is support comes from the SoC.

NB. This is actually an AR9342 rather than AR9344 but we use the 9344
definitions because there are no relevant differences for this board.

NB: Building only images that don't support reverting to the old
cloud-based firmware as the Skydog cloud service for the CR5000 no
longer exists.

Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
2018-07-30 10:43:31 +02:00
..
ar724x.dtsi ath79: add pinmux node to ar724x.dtsi 2018-06-01 08:23:02 +02:00
ar934x.dtsi ath79: ar934x: use irq-ath79-intc driver and enable wmac 2018-06-20 11:12:00 +02:00
ar7100.dtsi
ar7161_netgear_wndr3800.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7240.dtsi ath79: add AR7240 dtsi 2018-06-01 08:22:50 +02:00
ar7240_netgear_wnr612-v2.dts ath79: add Netgear WNR612 v2 2018-06-26 07:05:30 +02:00
ar7240_netgear_wnr612-v2.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7240_on_n150r.dts ath79: add support for ON Networks N150R 2018-06-26 07:05:44 +02:00
ar7240_tl-wr740n-v2.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7241.dtsi
ar7241_tl-mr3x20.dtsi ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tl-mr3220-v1.dts ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tl-mr3420-v1.dts ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tl-wr841-v7.dts ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_tp-link.dtsi ath79: add support for more AR7241 TP-Link boards 2018-06-28 20:31:47 +02:00
ar7241_ubnt_bullet-m.dts ath79: fix dts files 2018-05-17 07:40:19 +02:00
ar7241_ubnt_nano-m.dts ath79: fix dts files 2018-05-17 07:40:19 +02:00
ar7241_ubnt_rocket-m.dts ath79: fix dts files 2018-05-17 07:40:19 +02:00
ar7241_ubnt_unifi.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7241_ubnt_xm.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7242.dtsi
ar7242_avm_fritz300e.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7242_buffalo_wzr-hp-g450h.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar7242_tl-wr2543-v1.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9132.dtsi ath79: correct wmac names in dts 2018-06-01 08:23:47 +02:00
ar9132_tl-wr1043nd-v1.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9330.dtsi ath79: add pinmux to ar9330 2018-07-02 07:00:20 +02:00
ar9330_glinet_ar150.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331.dtsi ath79: add tl-mr3020-v1 support 2018-06-08 12:19:49 +02:00
ar9331_dpt_module.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_dragino_ms14.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_embeddedwireless_dorin.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_etactica-eg200.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_omega.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_tl-mr10u.dts ath79: fixup TL-WR703N/TL-MR10U split 2018-06-16 10:08:51 +02:00
ar9331_tl-mr3020-v1.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_tl-wr703n.dts ath79: fixup TL-WR703N/TL-MR10U split 2018-06-16 10:08:51 +02:00
ar9331_tl-wr703n_tl-mr10u.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ar9331_tl-wr740nd-v4.dts ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 2018-07-02 07:03:21 +02:00
ar9331_tl-wr741nd-v4.dts ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 2018-07-02 07:03:21 +02:00
ar9331_tl-wr741nd-v4.dtsi ath79: port TP-Link TL-WR741ND v4 and TL-WR740ND v4 2018-07-02 07:03:21 +02:00
ar9341.dtsi ath79: ar934x: use irq-ath79-intc driver and enable wmac 2018-06-20 11:12:00 +02:00
ar9344.dtsi ath79: ar934x: use irq-ath79-intc driver and enable wmac 2018-06-20 11:12:00 +02:00
ar9344_ocedo_raccoon.dts ath79: fix OCEDO Raccoon 2018-07-25 08:59:33 +02:00
ar9344_pcs_cr5000.dts ath79: Port PowerCloud Systems CR5000 support 2018-07-30 10:43:31 +02:00
ar9344_tl-wdr3600.dts ath79: preliminary support for TP-Link WDR3600 / WDR4300 (AR9344) 2018-05-22 20:53:15 +02:00
ar9344_tl-wdr4300.dts ath79: preliminary support for TP-Link WDR3600 / WDR4300 (AR9344) 2018-05-22 20:53:15 +02:00
ar9344_tl-wdr4300.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
ath79.dtsi ath79: mdio: add address-cells and size-cells defaults 2018-06-08 09:56:27 +02:00
qca956x.dtsi ath79: qca95xx: add new intc2, correct intc3 and add second pcie on qca9557 2018-06-20 11:12:00 +02:00
qca9533.dtsi ath79: initial gl-ar300m support 2018-06-18 20:29:38 +02:00
qca9533_glinet_ar300m.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
qca9533_glinet_ar300m_nand.dts ath79: add initial nand support for gl-ar300m 2018-06-18 20:29:38 +02:00
qca9533_glinet_ar300m_nor.dts ath79: initial gl-ar300m support 2018-06-18 20:29:38 +02:00
qca9557.dtsi ath79: qca95xx: add new intc2, correct intc3 and add second pcie on qca9557 2018-06-20 11:12:00 +02:00
qca9558_openmesh_om5p-ac-v2.dts ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
qca9558_tl-archer-c7-v2.dts ath79: add support for TP-Link Archer c7 v2 2018-06-26 08:57:26 +02:00
qca9558_tl-archer-c7.dtsi ath79: fix TP-Link Archer C7 v2 wlan1 MAC address 2018-07-18 19:17:46 +02:00
qca9558_tl-wr1043nd-v2.dts ath79: add support for tl-wr1043nd v2/v3 2018-06-18 20:29:38 +02:00
qca9558_tl-wr1043nd-v3.dts ath79: add support for tl-wr1043nd v2/v3 2018-06-18 20:29:38 +02:00
qca9558_tl-wr1043nd.dtsi ath79: Remove all memory nodes defined in dts 2018-06-28 18:39:57 +02:00
qca9563_phicomm-k2t.dts ath79: add support for Phicomm K2T 2018-06-18 18:21:16 +02:00
qca9563_tl-re450-v2.dts ath79: add support for TP-Link RE450 v2 2018-07-02 07:05:33 +02:00
qca9563_tl-wr1043n.dtsi ath79: small wr1043nd-v4 fixes 2018-06-28 20:31:03 +02:00
qca9563_tl-wr1043nd-v4.dts ath79: small wr1043nd-v4 fixes 2018-06-28 20:31:03 +02:00
qca9563_ubnt_unifiac-lite.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-lite.dtsi ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-mesh-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-mesh.dts ath79: add support for Unifi AC Mesh 2018-06-28 20:31:48 +02:00
qca9563_ubnt_unifiac-pro.dts ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac-pro.dtsi ath79: add support for UniFi AC-Mesh Pro 2018-07-07 21:07:40 +02:00
qca9563_ubnt_unifiac.dtsi ath79: remove bs-partition ro-flag for UniFi AC devices 2018-07-04 01:20:03 +02:00