Commit graph

29372 commits

Author SHA1 Message Date
John Crispin
f76755da3f packages: fix typo in OpenWrt name
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 43542
2014-12-07 16:53:30 +00:00
John Crispin
8a123f6f66 ramips: generate factory images for Nexx devices
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 43541
2014-12-07 16:53:22 +00:00
John Crispin
3572657c5a ar71xx: dev-eth: replace mdelay calls
Similar to patch 2. Replace further mdelay calls.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43540
2014-12-07 16:53:15 +00:00
John Crispin
59e7999a44 ag71xx: replace delay with sleep calls
I don't see that we're in an atomic context so there's no need to
busy-wait. Therefore replace the delay with sleep calls.
See also Documentation/timers/timers-howto.txt. It states:
"In general, use of mdelay is discouraged and code should
be refactored to allow for the use of msleep."

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43539
2014-12-07 16:53:09 +00:00
John Crispin
4caa8d50ad ag71xx: replace fixed PHY reset wait time in ar7240sw_setup
Replace the fixed wait time of 1s with polling for BMCR_RESET
to be cleared on all PHYs.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 43538
2014-12-07 16:52:58 +00:00
John Crispin
951866a8eb e2fsprogs: add InstallDev section to Makefile
btrfs-progs is using libext2fs, so headers and libs need to be staged

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43537
2014-12-07 16:52:50 +00:00
Hauke Mehrtens
563f963b1b kernel: refresh patches for kernel 3.18
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43536
2014-12-07 16:12:44 +00:00
Hauke Mehrtens
8e738da02c brcm47xx: remove kernel 3.10
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43535
2014-12-07 15:34:28 +00:00
Rafał Miłecki
dc6171c734 bcm53xx: 3.18: add early support for Buffalo WZR-900DHP
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43534
2014-12-07 11:02:52 +00:00
Rafał Miłecki
a20fa1cb48 bcm53xx: add early support for Buffalo WZR-900DHP
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43533
2014-12-07 10:55:44 +00:00
Rafał Miłecki
1020b84266 brcm47xx: add early support for WNDR3400 V3
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43532
2014-12-07 00:58:40 +00:00
John Crispin
f57b53e3b0 perf: this package fails to build for !eglibc
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43531
2014-12-06 20:27:57 +00:00
Rafał Miłecki
9bec9b86af bcm53xx: backport BCM5301X patches from arm-soc.git next/dt
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43530
2014-12-05 16:46:55 +00:00
Rafał Miłecki
d1e0e39993 bcm53xx: squeeze (rename) BCM5301X patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43529
2014-12-05 16:15:16 +00:00
Rafał Miłecki
8ea3c20b23 bcm53xx: rename patches that were not upstreamed to 3xx
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43528
2014-12-05 16:13:27 +00:00
Rafał Miłecki
8033ccc975 kernel: update bcma up to 2014-10-27
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43527
2014-12-05 16:11:03 +00:00
Jonas Gorski
e0342d2684 sdk: don't try to build in-kernel kmods
We don't ship the kernel sources, so using the base git as a feed will
fail when trying to build kernel modules with separate install steps.
Instead of trying to fixup the install steps, let's just skip building
kernel modules alltogether and just create empty packages.

Out-of-kernel modules are still expected to exist and are packaged, as
for these sources are fetched during the normal build steps.

Reported-by: Jo-Philipp Wich <jow@openwrt.org>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 43525
2014-12-05 11:50:42 +00:00
John Crispin
c79ddb3773 octeon: sysupgrade: support config restore on ERL
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43524
2014-12-05 08:58:25 +00:00
John Crispin
1731d5520e octeon: sysupgrade: rename old kernel after mounting /boot
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43523
2014-12-05 08:58:18 +00:00
John Crispin
52f1d8ecdc octeon: sysupgrade: fix test for rootfs device
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43522
2014-12-05 08:58:06 +00:00
John Crispin
dcc20e525b oxnas: switch back to kernel 3.14
3.18 still got problems with stuck reboots if rootfs is ubifs...

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43521
2014-12-05 00:20:50 +00:00
John Crispin
e553dfc356 oxnas: re-add support for kernel 3.14
This reverts commit c81ddddde5fd193802d511b42eb7b108aac17136 on
https://gitorious.org/openwrt-oxnas/openwrt-oxnas.git
which removed patches and config for 3.14.

[arm_introduce-dma-fiq-irq-broadcast patch was renamed to match 3.18]

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43520
2014-12-05 00:20:41 +00:00
John Crispin
dcc8a8ca9e octeon: add support for 3.18 kernel
Runtime tested on Ubiquiti EdgeRouter Lite.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43519
2014-12-05 00:20:10 +00:00
John Crispin
6f665ea7b8 octeon: sysupgrade: support config restore
SVN-Revision: 43518
2014-12-05 00:19:59 +00:00
John Crispin
28a9d9853b octeon: sysupgrade: get rootfsdev from kernel cmdline
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 43517
2014-12-05 00:19:46 +00:00
John Crispin
e6858f5f3f amazon: R.I.P.
its been broken for 2 1/2 years

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43516
2014-12-05 00:19:40 +00:00
John Crispin
e1c6ddfd20 kernel/modules: remove unused variable
https://dev.openwrt.org/ticket/18472

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43515
2014-12-05 00:19:28 +00:00
John Crispin
d04c4a311e ralink: mt7621 is a 1004Kc
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 43514
2014-12-03 20:22:42 +00:00
John Crispin
19a6f3dd11 procd: more nand takeover fixes
if the initramfs kernel and payload were flashed in one block, the payload might not be at the start of the ubi partition due to bad blocks inside the kernel partition.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43513
2014-12-03 20:22:37 +00:00
John Crispin
c3bb3906ee mtd: make the dump commnd honour the -o option
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43512
2014-12-03 20:22:32 +00:00
Felix Fietkau
426467beba kernel: add missing null pointer check for mips dma ops inline patch on 3.18
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43511
2014-12-03 18:17:17 +00:00
John Crispin
6ad5109211 uboot-envtools: use environment stored in UBI also for KD20
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43510
2014-12-03 16:05:23 +00:00
John Crispin
871e0a6316 uboot-oxnas: adjust digtial drive strength of IC+ phy
This is what the vendor bootloader does on KD20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43509
2014-12-03 16:05:17 +00:00
John Crispin
60edf49f7b uboot-oxnas: re-add IC+ phy driver
KD20 got an IC+ phy, without the driver the phy is not properly
initialized resulting in ethernet not working unless being already
initialized by the vendor loader.

upstream commit 368b4d2b49bbbf379d9334747fbbd2aaaafe4356
drivers: net: remove dead drivers
removed icplus.c due to the lack of in-tree users.
Partially revert that commit adding back the IC+ driver.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43508
2014-12-03 16:05:11 +00:00
John Crispin
a21c9fd655 kernel: make the ubi attach patch check for a valid ubi magic rather than a tar magic
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43507
2014-12-03 16:05:06 +00:00
John Crispin
a10a204aab kernel: make ubi auto-attach check for a tar file magic
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43506
2014-12-03 14:32:38 +00:00
John Crispin
68909fb081 procd: firstboot nand/ubi takeover support
it is now possible to flash a initramfs kernel and a sysupgrade tar file inside the ubi partition. on first boot, the takeover script will find the tar file, extract and finally sysupgrade it. this allows us to flash owrt/ubi images in a 2 phase setup using ODM webuis that are not ubi aware. this is needed by some mediatek and brokencom devices.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43505
2014-12-03 14:32:32 +00:00
John Crispin
1e8a83e553 uqmi: Add --delete-message for deleting SMS messages
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43504
2014-12-03 09:17:28 +00:00
John Crispin
ff02ea36e0 mtd: make the mtd dump call run properly on nand flash
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43503
2014-12-02 19:28:23 +00:00
Felix Fietkau
5331a85501 kernel/modules: package xhci for kernel>=3.18
xhci-hcd was split into xhci-pci and xhci-platform since 3.18

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43502
2014-12-02 19:26:45 +00:00
John Crispin
8a9979e57a gemini: update ethernet driver, register ethernet on nas4220 board
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 43501
2014-12-02 18:27:54 +00:00
John Crispin
da988d582f mtd: add ability to dump a mtd device
this can be used on nand flashes and will skip bad blocks and run ecc on the
read data before dumping it.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43500
2014-12-02 18:27:49 +00:00
John Crispin
283d7789ee uboot-oxnas: bump to U-Boot 2014.10
A few trivial changes were needed to adapt to upstream framework changes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43499
2014-12-02 15:25:37 +00:00
John Crispin
a122c1c9c9 oxnas: switch CRC32 implementation to SLICEBY8
similar to what was observed on kirkwood this significantly accelerates
btrfs write operations.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43498
2014-12-02 15:25:28 +00:00
John Crispin
9430e86b61 oxnas/kd20: add usb-storage to default package set
KD20 got a built-in card-reader wired to the USB-3 root-hub.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43497
2014-12-02 15:25:14 +00:00
John Crispin
46814be2a8 oxnas/kd20: use gpio-beeper
gpio-beeper module was added to the kernel recently.
Make use of it to drive the piezoelectric buzzer of the kd20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43496
2014-12-02 15:25:09 +00:00
John Crispin
c2e57fcb2f kernel/modules: package gpio-beeper
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43495
2014-12-02 15:25:03 +00:00
John Crispin
ae51d64671 au1000: set 3.14 as default
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43494
2014-12-02 15:23:37 +00:00
John Crispin
5698e62ecb opkg: the PKG_UPGRADE env was not set properly
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43493
2014-12-02 15:21:50 +00:00
John Crispin
3b1b3c5067 procd: drop the zram dependencies, theu caused a recursive deps warning
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43492
2014-12-02 13:16:06 +00:00