Commit graph

32314 commits

Author SHA1 Message Date
Steven Barth
ab71e84084 omcproxy: fix last commit
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46717
2015-08-24 08:53:16 +00:00
Steven Barth
e81f860bca omcproxy: add new igmpv3 & mldv2 multicast proxy
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46716
2015-08-24 08:28:11 +00:00
Jonas Gorski
2d53e22357 kernel: remove already upstream applied patch
Remove 131-MIPS-export-get_c0_perfcount_int.patch which was already applied
in 4.1.6. This fixes the following build error:

arch/mips/ath79/setup.c:217:77: error: redefinition of '__kstrtab_get_c0_perfcount_int'
arch/mips/ath79/setup.c:211:77: note: previous definition of '__kstrtab_get_c0_perfcount_int' was here
arch/mips/ath79/setup.c:217:350: error: redefinition of '__ksymtab_get_c0_perfcount_int'
arch/mips/ath79/setup.c:211:350: note: previous definition of '__ksymtab_get_c0_perfcount_int' was here
scripts/Makefile.build:258: recipe for target 'arch/mips/ath79/setup.o' failed

Reported-by: swalker
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46715
2015-08-23 21:33:57 +00:00
Jonas Gorski
548630d74e adm5120: make patches apply again
Fix patches not applying anymore since r46654.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46714
2015-08-23 19:11:07 +00:00
Jonas Gorski
2d379e796f kernel: update 4.1 to 4.1.6
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46713
2015-08-23 18:06:11 +00:00
Jonas Gorski
2190f090bb mvebu: kirkwood: fix ehci-orion probe if generic-phy isn't enabled
Properly treat -ENOSYS as no PHY, else ehci-orion won't work without
generic phy support.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46711
2015-08-23 13:35:03 +00:00
Jonas Gorski
ecfd245133 mac80211: disable ipw2x00 for big endian targets
The ipw2x00 drivers assume that the system they are running is little
endian, and access everything in native byte order. When run on a big
endian system, everything breaks apart.

Since fixing this is non trivial on a first glance, disable them for
big endian targets.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46708
2015-08-23 09:36:03 +00:00
Jonas Gorski
ecdce239a5 brcm63xx: ensure dummy byte is set for mapped spi flash with fast read
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly
set.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46707
2015-08-23 09:35:56 +00:00
Jonas Gorski
0d54d44349 scripts/feeds: allow export of feeds with static revisions
Add a switch to scripts/feeds that allows listing the feeds with their
currently checked out revisions in feeds.conf compatible format.

This allows providing a feeds.conf for public builds to make replication
of the build easier.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46706
2015-08-23 09:35:46 +00:00
Zoltan Herpai
e0d332cdbe sunxi: bump to 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46705
2015-08-21 13:23:29 +00:00
Zoltan Herpai
79e1aa2ac3 sunxi: add audio module for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46704
2015-08-21 13:16:11 +00:00
Zoltan Herpai
ed1a7a2deb sunxi: update ahci package list for a couple board profiles
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46703
2015-08-21 10:16:15 +00:00
Zoltan Herpai
c00198216a sunxi: reorganize kmod-ata-sunxi dependencies
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 46702
2015-08-21 10:08:07 +00:00
Zoltan Herpai
fdf3c6bf6e Newer kernels make use of libahci in ahci-platform, ie. also on non-PCI platforms. As there is no single config symbol deciding whether libahci.ko is being built or not it seems the most sensitive thing to package it in kmod-ata-core.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 46701
2015-08-21 09:48:05 +00:00
Imre Kaloz
87a70e0774 This had been set in r44508 as a workaround for switch problems.
Now that the switch driver can handle two devices with
the same MAC address in separate VLANs we can go back
to using the same address on both interfaces.

This is the Linksys firmware's default behavior.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46700
2015-08-21 08:10:48 +00:00
Imre Kaloz
9cca6c5ad9 Previously, all VLANs (port-based or 802.1q) were sharing a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1).
This also clears any bootloader-set FDB defaults. This had
caused issues creating port-based VLANs when mappings
overlapped previous VLANs. Packets destined to a port
not in the default port group flooded all ports.

Tested on a 88E6171 (Linksys EA4500) and 88E6172 ('1900AC)

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46699
2015-08-21 08:09:52 +00:00
Imre Kaloz
f57484c4af mvebu: fix cobra chainmask
Thanks Sebastian for spotting it.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46697
2015-08-21 08:01:48 +00:00
Zoltan Herpai
f5fcb0b4b8 kernel: add missing symbols for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46696
2015-08-20 23:19:42 +00:00
Steven Barth
c154130ebd odhcpd: various RA improvements
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46694
2015-08-20 12:43:45 +00:00
Imre Kaloz
d55a4a9e5f mwlwifi: fix commit hash for 10.3.0.8
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46693
2015-08-19 08:45:19 +00:00
Imre Kaloz
20fac016e4 mvebu: add support for the Linksys boot counter
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46690
2015-08-19 08:31:23 +00:00
Imre Kaloz
996399ba08 uhttpd: we don't know where the device is located, so reflect that in the cert
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46688
2015-08-19 08:20:11 +00:00
Imre Kaloz
58de65acb0 mwlwifi: upgrade to 10.3.0.8-20150818
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46687
2015-08-18 11:22:47 +00:00
Steven Barth
ed53726072 enable strong SSP / Stackprotector on gcc5
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46685
2015-08-18 09:20:34 +00:00
Steven Barth
a6dc587cf6 musl: fix getsubopt function
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46684
2015-08-18 09:18:40 +00:00
Steven Barth
bef52af66f polarssl: Fix build failures due to PKG_NAME != dir name
Packages that depend on PolarSSL fail to build because polarssl's InstallDev
section never actually gets executed because (prior to this patch) the package
name does not match the subdir the package is in (presumably due to upstream
name change).  As a workaround I have changed the package name back to
polarssl and used a new variable SRC_PKG_NAME for the purposes of downloading
the upstream tarball and creating PKG_BUILD_DIR.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 46683
2015-08-18 08:37:38 +00:00
Hauke Mehrtens
4d85dd6a8f mac80211: add mt7601u driver
firmware is not available in linux-firmware yet
so use official driver source

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46682
2015-08-17 21:19:27 +00:00
Jo-Philipp Wich
241d151b9c uhttpd: pass X-HTTP-Method-Override header to cgi scripts
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 46677
2015-08-17 16:17:36 +00:00
John Crispin
0ff8c94aab at91: fix usb rate backport patch tab mangle
The patch submitted in [46649] was mangled in the use of gmails webmail interface, tabs replaced with spaces, resulting in a patch which dit not apply.
This should fix the issue, sorry for the noise.

Signed-off-by: Ben Whitten <benwhitten@gmail.com>

SVN-Revision: 46676
2015-08-17 16:10:49 +00:00
John Crispin
8411858194 orion: remove IRQF_DISABLED
no-op since 2.6.35
    removed in Kernel 4.1
    see https://lwn.net/Articles/380931/

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46672
2015-08-17 11:26:14 +00:00
John Crispin
6d461ddbb2 generic: crypto: remove IRQF_DISABLED
no-op since 2.6.35
    removed in Kernel 4.1
    see https://lwn.net/Articles/380931/

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46671
2015-08-17 11:26:02 +00:00
John Crispin
4582d7e8f5 lantiq: Support newer versions of the PEF7071 ethernet PHYs
The BT Home Hub 5A uses three PEF7071 with PHY ID 0xd565a401. Daniel's
PHY driver (for his u-boot sources) already supports that PHY because
it uses a PHY ID mask of 0xfffffff8.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46670
2015-08-17 11:25:57 +00:00
John Crispin
eb42485093 iwinfo: update to latest git HEAD
adds extra station info reporting

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46669
2015-08-17 11:25:51 +00:00
John Crispin
9b531bcab1 oxnas: remove support for kernel 3.18 and 4.0
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 46668
2015-08-17 11:25:46 +00:00
John Crispin
402c2d008b ramips: move patches around
0073 needs to applied afert 0102

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46667
2015-08-17 10:13:46 +00:00
John Crispin
cbc2613a5c ugps: update to latest git HEAD
fixes 2 bugs
* typo
* use %04d rather than %d when printing the position

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46666
2015-08-17 10:13:03 +00:00
John Crispin
0f155a330e ramips: base-files: optimize etc/diag.sh and etc/board.d/01_leds scripts
Instead of using board name provided explicitly as text in LED name, ex.:

[...]
mlwg2)
	status_led="mlwg2:blue:system"
[...]

use $board variable, which allows to combine together multiple boards with same color and LED names, ex:

[...]
mlw221|\
mlwg2)
	status_led="$board:blue:system"
[...]

The above approach allows to shrink size of code in base-files/etc/board.d/01_leds and base-files/etc/diag.sh scripts dramatically.
One thing to keep in mind here is that we assume to use proper and consistent LED naming scheme ("device:color:led-name").

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46665
2015-08-17 06:24:47 +00:00
John Crispin
1a392636a5 ramips: use consistent naming scheme for LEDs
The upstream LED naming convention is "device:color:led-name", but it seems that many of supported boards in OpenWrt don't follow this approach.
The following patch fixes this inconsistency in dts{,i} files and updates base-files scripts for ramips target:
 * fixes wrong indentation
 * keeps case statements structure in same convention as in other scripts (no empty line after ";;", no indentation for case...esac body)
 * fixes wrong LED names for some of boards (makes them the same as in dts{,i} files)
 * combines boards with same configuration (ex. set_wifi_led "rt2800pci-phy0::radio" in 01_leds)

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>

SVN-Revision: 46664
2015-08-17 06:24:34 +00:00
John Crispin
af60c367b7 ar71xx: add support for TP-Link TL-WDR6500 v2
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

This patch adds support for TP-Link TL-WDR6500 v2.

The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for
the whole firmware, so I have to create a new firmware creation method.

SVN-Revision: 46663
2015-08-17 06:24:04 +00:00
John Crispin
a2b38ebf77 ar71xx: add 64kb bootloader mtd parser for tplinkpart
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

This patch adds flash layout parser for TP-Link firmwares which have a 64kb
bootloader.

This is used for TP-Link TL-WDR6500 v2.

SVN-Revision: 46662
2015-08-17 06:23:49 +00:00
John Crispin
cc3747e9e2 tools/firmware-utils: add header version 2 support for mktplinkfw
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

This patch adds header version 2 option for mktplinkfw.

The version 2 header is used for AR/QCA firmwares and is not the same as
the header generated by mktplinkfw2.
Instead, it is nearly the same as version 1 header except for the header
version and the RSA signature.

The header version 2 support is used for newer TP-Link routers which have
only a 64kb bootloader part, e.g. TL-WDR6500 v2.

SVN-Revision: 46661
2015-08-17 06:23:43 +00:00
John Crispin
eba4a143c6 ramips: reorder the sysupgrade script
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46660
2015-08-17 06:18:38 +00:00
John Crispin
aa4c6e27b4 ramips: reorder patches
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46659
2015-08-17 06:18:30 +00:00
John Crispin
b0b59a8e75 ipq806x: switch AP148 to using SMEM based MTD parser
*Enable SMEM MTD parser and its dependencies (SMEM & HW spinlocks) in
 the kernel config
*Replaces the MTD layout in DT by the dynamic layout provided by the
 SMEM parser for AP148

Using the OF based parser is still possible on platforms which have a
fixed MTD partition layout.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46658
2015-08-17 06:18:15 +00:00
John Crispin
0e33ae8e5d ipq806x: add QCOM SMEM based MTD parser
This patch adds a new parser which uses the SMEM available on IPQ and
some other QCOM platforms to map the MTD partitions.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46657
2015-08-17 06:18:04 +00:00
John Crispin
6529d23267 ipq806x: add SMEM support
2 patches are cherry-picked from the following LKML thread:
*https://lkml.org/lkml/2015/4/11/208

The last patch (036-soc-qcom-add-smem-to-IPQ806x-platforms.patch) is
adding the corresponding DT nodes required for IPQ806x.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46656
2015-08-17 06:17:58 +00:00
John Crispin
6b775f4517 ipq806x: add hwspinlock support
This change cherry-picks the following 3 changes from linux-next:
*fb7737 hwspinlock/core: add device tree support
*19a0f6 hwspinlock: qcom: Add support for Qualcomm HW Mutex block
*bd5717 hwspinlock: qcom: Correct msb in regmap_field

We're also adding a patch to add the hardware spinlock device nodes on
IPQ806x platforms (033-soc-qcom-Add-sfbp-device-to-IPQ806x-dts.patch).

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 46655
2015-08-17 06:17:47 +00:00
John Crispin
6856535e29 kernel: move linux, part-probe dt parsing in generic code
The "linux,part-probe" dts parsing is a pretty neat generic feature.
It has been posted to kernel.org and could easily be reused by all
targets.

This change moves the patch to the 3.18 and 4.1 generic folders, and
makes the feature available to all platforms who may want to use it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46654
2015-08-17 06:17:37 +00:00
John Crispin
e83643d31c base-files: default_postinst: propagate the real postinst return code
Using the postinst script for sanity checks and expecting opkg to fail
if the postinst didn't return 0 was possible in Barrier Breaker, propagate
the real postinst return code through default_postinst to restore this
behaviour.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 46653
2015-08-17 06:17:23 +00:00
John Crispin
e5488123e6 hostapd: Add vlan_file option to netifd.sh
Other VLAN related options are already being processed in netifd.sh
but the vlan_file option is missing. This option allows the mapping
of vlan IDs to network interfaces and will be used in dynamic VLAN
feature for binding stations to interfaces based on VLAN
assignments. The change is done similarly to the wpa_psk_file
option.

Signed-off-by: Gong Cheng <chengg11@yahoo.com>

SVN-Revision: 46652
2015-08-17 06:17:13 +00:00