Previously, all VLANs (port-based or 802.1q) were sharing a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1).

This also clears any bootloader-set FDB defaults. This had
caused issues creating port-based VLANs when mappings
overlapped previous VLANs. Packets destined to a port
not in the default port group flooded all ports.

Tested on a 88E6171 (Linksys EA4500) and 88E6172 ('1900AC)

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46699
This commit is contained in:
Imre Kaloz 2015-08-21 08:09:52 +00:00
parent f57484c4af
commit 9cca6c5ad9
2 changed files with 19 additions and 4 deletions

View file

@ -493,7 +493,7 @@ static int mvsw61xx_vtu_program(struct switch_dev *dev)
sw16(dev, MV_GLOBALREG(VTU_VID),
MV_VTU_VID_VALID | state->vlans[i].vid);
sw16(dev, MV_GLOBALREG(VTU_SID), i);
sw16(dev, MV_GLOBALREG(VTU_FID), 0);
sw16(dev, MV_GLOBALREG(VTU_FID), i);
sw16(dev, MV_GLOBALREG(VTU_DATA1), v1);
sw16(dev, MV_GLOBALREG(VTU_DATA2), v2);
sw16(dev, MV_GLOBALREG(VTU_DATA3), 0);
@ -521,8 +521,10 @@ static void mvsw61xx_vlan_port_config(struct switch_dev *dev, int vno)
if(mode != MV_VTUCTL_EGRESS_TAGGED)
state->ports[i].pvid = state->vlans[vno].vid;
if (state->vlans[vno].port_based)
if (state->vlans[vno].port_based) {
state->ports[i].mask |= state->vlans[vno].mask;
state->ports[i].fdb = vno;
}
else
state->ports[i].qmode = MV_8021Q_MODE_SECURE;
}
@ -579,8 +581,14 @@ static int mvsw61xx_update_state(struct switch_dev *dev)
state->ports[i].mask &= ~(1 << i);
reg = sr16(dev, MV_PORTREG(VLANMAP, i)) & ~MV_PORTS_MASK;
reg |= state->ports[i].mask;
/* set default forwarding DB number and port mask */
reg = sr16(dev, MV_PORTREG(CONTROL1, i)) & ~MV_FDB_HI_MASK;
reg |= (state->ports[i].fdb >> MV_FDB_HI_SHIFT) &
MV_FDB_HI_MASK;
sw16(dev, MV_PORTREG(CONTROL1, i), reg);
reg = ((state->ports[i].fdb & 0xf) << MV_FDB_LO_SHIFT) |
state->ports[i].mask;
sw16(dev, MV_PORTREG(VLANMAP, i), reg);
reg = sr16(dev, MV_PORTREG(CONTROL2, i)) &
@ -620,6 +628,7 @@ static int mvsw61xx_reset(struct switch_dev *dev)
return -ETIMEDOUT;
for (i = 0; i < dev->ports; i++) {
state->ports[i].fdb = 0;
state->ports[i].qmode = 0;
state->ports[i].mask = 0;
state->ports[i].pvid = 0;

View file

@ -224,6 +224,11 @@ enum {
#define MV_PVID_MASK 0x0fff
#define MV_FDB_HI_MASK 0x00ff
#define MV_FDB_LO_MASK 0xf000
#define MV_FDB_HI_SHIFT 4
#define MV_FDB_LO_SHIFT 12
struct mvsw61xx_state {
struct switch_dev dev;
struct mii_bus *bus;
@ -238,6 +243,7 @@ struct mvsw61xx_state {
int vlan_enabled;
struct port_state {
u16 fdb;
u16 pvid;
u16 mask;
u8 qmode;