Commit graph

32888 commits

Author SHA1 Message Date
Hauke Mehrtens
f38dbb89c2 kernel: add missing config options
This was seen by the buildbot on arm64.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47452
2015-11-10 23:21:10 +00:00
Hauke Mehrtens
fa137d51f5 ar71xx: add Arduino Yun
This is based on patches from Federico Fissore <f.fissore@arduino.cc>
especially this one:
7e2976fa83

The console is running with 250000 baud which is a non standard baud
rate and needs an extra patch to be applied, I will try to get this
patch upstream or something else which accomplish the same.

Some upstream code looks like there are many different versions of this
SoC, are these only internal versions and all versions on the consumer
market are the same? I saw different GPIO configuration and flash sizes
of 8MB and 16MB?

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47451
2015-11-10 23:13:09 +00:00
Hauke Mehrtens
1bfbf2de6d ar71xx: serial: core: add support for boot console with arbitrary baud rates
The Arduino Yun uses a baud rate of 250000 by default. The serial is
going over the Atmel ATmega and is used to connect to this chip.
Without this patch Linux wants to switch the console to 230400 Baud.

With this patch Linux will use the configured baud rate and not some
standard one which is near by.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47450
2015-11-10 23:11:10 +00:00
Hauke Mehrtens
abea1127c9 ar71xx: add function to access the GPIO function2 register
Add access to the function2 gpio register. This probably has to be
converted into a pimux driver later on. This is needed for some setup
functions on the Arduino Yun.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47449
2015-11-10 23:10:11 +00:00
Luka Perkov
b18c9d271e uhttpd: add support for configuration option ubus_cors
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 47448
2015-11-10 22:28:45 +00:00
Felix Fietkau
99af1cf410 kernel: fix breakage in the 4.3 version of 611-netfilter_match_bypass_default_table.patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47447
2015-11-10 21:11:25 +00:00
Felix Fietkau
d3ba30b9cd toolchain/gdb: disable python support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47446
2015-11-10 21:11:20 +00:00
Felix Fietkau
79e14650e0 toolchain: remove obsolete relinking code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47445
2015-11-10 21:11:03 +00:00
Felix Fietkau
1fb3259541 opkg: remove obsolete gcc version check
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47444
2015-11-10 21:10:57 +00:00
Felix Fietkau
f7939f5e74 gcc: remove version 4.6, it is no longer needed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47443
2015-11-10 21:10:53 +00:00
Felix Fietkau
795cab69b3 gcc: enable LTO support unconditionally
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47442
2015-11-10 21:10:45 +00:00
Felix Fietkau
8a22f31c25 gcc: use version 5.x for octeon instead of 4.6 - it has been tested with glibc
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47441
2015-11-10 21:10:39 +00:00
Felix Fietkau
940bc81bc2 build: add -Wno-error=unused-result to target cflags
Many glibc functions have __warn_unused_result__ in so many different
core functions, and failing the build for all of those simply does not
make any sense

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47440
2015-11-10 12:04:09 +00:00
Felix Fietkau
b613c96d94 openvpn: enable options consistency check even in the small build
Only costs about 3k compressed, but significantly improves handling of
configuration mismatch

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47439
2015-11-10 12:04:04 +00:00
Felix Fietkau
8b5d644bb3 toolchain: add support of ARC architecture
This includes binutils, gcc, gdb and uClibc-ng.

Latest release of ARC gcc (as of today it is "arc-2015.06")
is based on upstream gcc 4.8.4.

Sources are available on GitHub, see:
https://github.com/foss-for-synopsys-dwc-arc-processors/gcc

Latest release of ARC binutils (as of today it is "arc-2015.06")
is based on upstream binutils 2.23.

Sources are available on GitHub, see:
https://github.com/foss-for-synopsys-dwc-arc-processors/binutils-gdb/releases/tag/arc-2015.06

Latest release of ARC GDB (as of today this is "arc-2015.06-gdb")
is based on upstream gdb 7.9.1.

Sources are available on GitHub, see:
https://github.com/foss-for-synopsys-dwc-arc-processors/binutils-gdb/releases/tag/arc-2015.06-gdb

Note that for binutils and gdb that come from unified git repository
(which is the case for upstream binutils/gdb today) we need to disable
building of gdb in binutils and binutils in gdb hence in binutils:
------>8------
--disable-sim
--disable-gdb
------>8------

and in gdb:
------>8------
--disable-binutils
--disable-ld
--disable-gas
------>8------

Also in gdb we disable sim because if the following breakage while
building with it:
------------>8------------
/usr/bin/env bash ./../common/genmloop.sh -shell /usr/bin/env bash \
        -mono -fast -pbb -switch sem5-switch.c \
        -cpu a5f -infile ./mloop5.in \
        -outfile-suffix 5
unknown option: bash
Makefile:699: recipe for target 'stamp-5mloop' failed
make[7]: *** [stamp-5mloop] Error 1
------------>8------------

Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

SVN-Revision: 47438
2015-11-10 12:03:59 +00:00
Felix Fietkau
759b1c1187 ath10k-firmware: add qca6174 firmware (mostly untested)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47437
2015-11-10 12:03:39 +00:00
Luka Perkov
ba26e9f60f kirkwood: rename EA3500/EA4500 profiles
Match the engineering board names now used elsewhere.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47436
2015-11-10 00:17:01 +00:00
Luka Perkov
31c7de0313 kirkwood: add diag LED on Linksys EA3500
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47435
2015-11-10 00:16:56 +00:00
Luka Perkov
b0e7ca4f8f kirkwood: support sysupgrade on Linksys EA[34]500
This automatically writes to the alternate firmware partition
(on Linksys's dual firmware layout) using code borrowed from
the WRT1900AC port.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47434
2015-11-10 00:16:42 +00:00
Luka Perkov
ea8ac0999c kirkwood: support Linksys boot counter on EA[34]500
This is done with existing code from the WRT1900AC port.
It makes sure the "auto_recovery" bootloader option is set,
and resets the s_env boot counter after a successful boot.

This gives users without a serial console connection some
measure of safety.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47433
2015-11-10 00:16:37 +00:00
Luka Perkov
6acb552eee kirkwood: generate factory images for Linksys EA[34]500
This is done with the new image generation system and board names.
It also generates a sysupgrade.tar image.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47432
2015-11-10 00:16:35 +00:00
Luka Perkov
5d4bbb5f5b kirkwood: find active Linksys root partition
This is imported verbatim from the mvebu WRT1900AC port.

It picks up the current boot partition from the kernel command line,
then renames that partition "ubi" so that it auto-mounts.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47431
2015-11-10 00:16:33 +00:00
Luka Perkov
ad8f6370de kirkwood: consistently use engineering board names
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47430
2015-11-10 00:16:28 +00:00
Luka Perkov
3ef14d0c3d kirkwood: rework Linksys EA[34]500 DTS
- Use board engineering names rather than marketing names

- Linksys uses a dual firmware layout, where the bootloader
  will switch to the other stored image when one fails to
  boot three consecutive times.

  In order to make this firmware compatible with the factory
  images and the stock bootloader we must match this layout.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47429
2015-11-10 00:16:24 +00:00
Luka Perkov
49db4924d7 kirkwood: enable squashfs-on-ubiblock support
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47428
2015-11-10 00:16:14 +00:00
Felix Fietkau
d293f33558 mac80211: restricted automatic channel selection
Add a new config option "channels" for mac80211 wifi devices. It's only
valid if automatic channel selection is used and restricts the channel
selection to one of the given channels.

config wifi-device
	list channels	1
	list channels	6
	list channels	11

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 47427
2015-11-08 20:40:15 +00:00
Felix Fietkau
b7e946f33e tools/e2fsprogs: update to 1.42.13
Update e2fsprogs to 1.42.13.
Refresh and cleanup patches.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 47426
2015-11-08 20:40:03 +00:00
Felix Fietkau
091284ff0b e2fsprogs: add packages for "chattr" and "lsattr"
Signed-off-by: Richard Kunze <richard.kunze@web.de>

SVN-Revision: 47425
2015-11-08 20:39:54 +00:00
Felix Fietkau
4eb55d71de conntrack-tools: split into conntrack/conntrackd
as conntrack and conntrackd are completely independent programs,
serving a different purpose.

Also split by other distributions, as Debian and Ubuntu.

Signed-off-by: Ulrich Weber <uw@ocedo.com>

SVN-Revision: 47424
2015-11-08 20:39:49 +00:00
Felix Fietkau
1361a863df conntrack-tools: upgrade to 1.4.3
Signed-off-by: Ulrich Weber <uw@ocedo.com>

SVN-Revision: 47423
2015-11-08 20:39:44 +00:00
Felix Fietkau
17ce564107 conntrack-tools: remove default config file
default configuration will fill up disk by
writing /var/log/conntrackd-stats.log

Introduced due init script auto start.

Signed-off-by: Ulrich Weber <uw@ocedo.com>

SVN-Revision: 47422
2015-11-08 20:39:37 +00:00
Felix Fietkau
23fbd97649 x86: add generic profiles to x86_64, kvm_guest and xen_domu
The imagebuilder requires a profile for every subtarget to work.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 47421
2015-11-08 20:39:24 +00:00
Felix Fietkau
7f75961e38 ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)
The international version is completely different from the already
supported Chinese version. The WLAN of the QCA956x SoC used by this router
has been fixed in r46948.

This patch looks like it changes a lot in
700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately,
quilt decided to completely reorganize the Kconfig patch even though only
a single section has been added.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 47420
2015-11-08 20:39:18 +00:00
Felix Fietkau
1d6a530fe6 uhttpd: update to the latest version, adds support for redirect helper scripts
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47419
2015-11-08 20:39:09 +00:00
Felix Fietkau
d965d94b22 libubox: update to the latest version, adds a small json_script feature
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47418
2015-11-08 20:39:01 +00:00
Felix Fietkau
0a96564f9b ar71xx: fix typo in r47416
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47417
2015-11-07 18:33:45 +00:00
Felix Fietkau
9dd5c79c47 ar71xx: fix alignment of struct arpt_arp (fixes #14577)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47416
2015-11-07 16:22:38 +00:00
Felix Fietkau
9fde3614b0 kernel: remove kmod-xen-kbddev, it is already enabled in the kernel config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47415
2015-11-07 16:22:31 +00:00
Felix Fietkau
0ed2c1a89f kernel: remove kmod-acpi-button package, it is already built into the kernel
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47414
2015-11-07 16:22:23 +00:00
Felix Fietkau
05baf2ced2 toolchain: remove obsolete kernel version check
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47413
2015-11-07 16:22:18 +00:00
Felix Fietkau
ad133b57a9 kernel: remove linux 4.0 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47412
2015-11-07 16:22:08 +00:00
Felix Fietkau
86a46a817b image: append-ubi: add optional UBI subpage size
Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 47411
2015-11-07 13:19:35 +00:00
Felix Fietkau
bdbd0dce2e tools/quilt: fix build error during kernel_menuconfig on a cleaned env
When running "make kernel_menuconfig" right after "make clean", we error
out with the following message:

Makefile:22: recipe for target '.../build_dir/target-arm_cortex-a7_musl-1.1.10_eabi/linux-.../linux-3.18.18/.quilt_checked' failed
make[2]: [.../build_dir/target-arm_cortex-a7_musl-1.1.10_eabi/linux-.../linux-3.18.18/.quilt_checked]
Error 127 (ignored)

The root cause of the problem is located in the OpenWrt specific quilt
patch, which sets the quilt install directory to $STAGING_DIR/../host.
However, on a clean environment (right after running "make clean"),
$STAGING_DIR doesn't exist. The "quilt" executable doesn't find its
different commands, errors out, and creates this message.

We're fixing it by using $STAGING_DIR_HOST rather than $STAGING_DIR,
which is absolute. It will work even if there is no target directory
yet.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47410
2015-11-07 12:52:14 +00:00
Felix Fietkau
279c8bee8d rules.mk: export STAGING_DIR_HOST to sub-makefiles and shells
Certains host packages (like quilt) need to know the previously used
install location at run-time. They currently use $STAGING_DIR, which
causes issues on cleaned environment, where $STAGING_DIR doesn't exist
yet.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 47409
2015-11-07 12:52:07 +00:00
Felix Fietkau
08f1e1b3ac mac80211: set mcast-rate for mesh point interfaces
In order to set the multicast rate for mesh point interfaces the "mesh join"
was made explicit and moved to mac80211_setup_vif(), similar to how it is
done for IBSS interfaces.

Previously, the mesh join was made implicit in case authentication (i.e.
$key) was not used when creating the interface in mac80211_prepare_vif(),
while using authentication would create the interface first, then join
later in mac80211_setup_vif() by starting authsae.

Signed-off-by: Nils Schneider <nils@nilsschneider.net>

SVN-Revision: 47408
2015-11-07 12:52:01 +00:00
Felix Fietkau
b95aed986a ramips: minor fixes for mt7621 profiles
* remove references to non-existing kmod-usb3-mt7621
 * ZTB WG2626 doesn't have an RTC (thanks to Piotr Dymacz!)

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 47407
2015-11-07 12:51:48 +00:00
Felix Fietkau
846b8593fc ar71xx: add support for the TP-LINK TL-WR1043ND v3
The hardware of the v3 is identical to the v2.

Based-on-patch-by: Andreas Ziegler <github@andreas-ziegler.de>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 47406
2015-11-07 12:51:43 +00:00
Felix Fietkau
ae7e7239b8 ar71xx: Add support for ZyXEL NBG6616.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>

SVN-Revision: 47405
2015-11-07 12:51:39 +00:00
Felix Fietkau
46f6626052 include/image.mk: Introduce generic option to wrap kernel into JFFS2
Some devices require the kernel to be in a JFFS2 file system. Make the
support for this more generic so that it can be used by other devices.

Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>

SVN-Revision: 47404
2015-11-07 12:51:31 +00:00
Felix Fietkau
141793c96c include/image.mk: introduce KERNEL_INITRAMFS_NAME variable
In case if we're interested in generation of non-binary images
(for example if we want images to be valid .elfs - and that's what we
want for ARC now) we have to instruct Device/Build/initramfs target to
use input file with some extension (in case of ARC it will be
essentially .elf).

Otherwise default binary vmlinux-initramfs (without extension) is used and
resulting images then are binaries instead of elfs.

Now having KERNEL_INITRAMFS_NAME variable it's possible to substitute
default $$(KERNEL_NAME)-initramfs with preferred option like
$$(KERNEL_NAME)-initramfs.elf.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: John Crispin <blogic@openwrt.org>

SVN-Revision: 47403
2015-11-07 12:51:24 +00:00