Commit graph

15707 commits

Author SHA1 Message Date
Gabor Juhos
479a0ef957 generic: lzma-loader: remove trailing whitespaces from start.S
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 49055
2016-03-21 13:15:05 +00:00
John Crispin
1cdd3403ba ar71xx: WNR1000v2: fix for random WLAN MAC
Fix for invalid/random WLAN MAC address in WNR1000v2. Permanent platform
MAC is calculated and assigned during system startup. WLAN MAC follows
wired Ethernet interface addresses. This is the same fix as for WNR2000v3
and WNR612v2.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 49051
2016-03-20 14:41:58 +00:00
John Crispin
d6d0597cdf lantiq: use upstream mechanism to append device tree file
Instead of using our patch-dtb program just place the device tree
behind the kernel binary and then let the in kernel mechanism fetch it.
This also adds support for having the device tree file in the boot
loader.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49050
2016-03-20 14:41:54 +00:00
John Crispin
cc82da0bc1 ramips: MiWifi-Nano - change gpios to leds, add to default build group
1) Use leds to indicate:
Red - Power
Amber - Radio On
Blue - Wifi associated
2) Add profile to default build group for MT7628 subtarget

Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>

SVN-Revision: 49045
2016-03-20 14:41:33 +00:00
John Crispin
e9db6eb8b2 oxnas: sync cpu-hotplug with mach-realview
Make mach-oxnas/hotplug.c look more similar to mach-realview/hotplug.c,
just cosmetics and maintainability concerns, no functional changes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49044
2016-03-20 14:41:29 +00:00
John Crispin
b64f159bc8 oxnas: add spinlock in pinctrl driver
Try to address a race-condition in pinctrl-oxnas.c

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49043
2016-03-20 14:41:25 +00:00
John Crispin
daf7ab04ba oxnas: also reset GPIO B registers on boot
Clear both, SYS_CTRL_*_SEL and SEC_CTRL_*_SEL on boot instead of
writing to SYS_CTRL_*_SEL twice which looks like a copy-paste error.
Thanks to anonymous to bring this up in #21892!

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49042
2016-03-20 14:41:21 +00:00
John Crispin
174bc392ff oxnas: switch to new image generation template
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49041
2016-03-20 14:41:17 +00:00
John Crispin
3cea0747d6 oxnas: add Default profile and reorganize device profiles
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49040
2016-03-20 14:41:13 +00:00
Hauke Mehrtens
fcbc97ad78 kernel: update kernel 4.1 to version 4.1.20
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49035
2016-03-18 23:41:21 +00:00
Hauke Mehrtens
7ed9ee6f30 kernel: add missing kernel options
This was found by the build bot.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49033
2016-03-17 22:36:27 +00:00
Hauke Mehrtens
b3aae4c672 kernel: update kernel 4.4 to version 4.4.6
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 49032
2016-03-17 21:41:07 +00:00
John Crispin
4d6c4994fc ar71xx: Use PHY fixups for Open Mesh MR1750
The delays of PHY/MAC on the MR1750 are done by u-boot and OpenWrt in
different ways. u-boot only modifies the ETH_CFG of the QCA955x based on
the link speed. But OpenWrt can only modify the PHY delays based on the
link speed.

This can lead to communication problems when u-boot initializes the ETH_CFG
for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY
delays to an incompatible value.

Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and
only rely on the AT803x PHY settings.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49031
2016-03-16 09:27:14 +00:00
John Crispin
ebcce35be4 ar71xx: Use PHY fixups for Open Mesh MR900
The delays of PHY/MAC on the MR900 are done by u-boot and OpenWrt in
different ways. u-boot only modifies the ETH_CFG of the QCA955x based on
the link speed. But OpenWrt can only modify the PHY delays based on the
link speed.

This can lead to communication problems when u-boot initializes the ETH_CFG
for a specific link speed (e.g. 10BASE-T) but then OpenWrt the sets the PHY
delays to an incompatible value.

Instead reset the ETH_CFG delay bits of the QCA955x to a specific value and
only rely on the AT803x PHY settings.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49030
2016-03-16 09:27:11 +00:00
John Crispin
22c5f96c6b ar71xx: Allow to set the RXDV, RXD, TXD, TXE delays for QCA955x
Some u-boot versions for QCA955x change the delays based on the link speed
during boot. This usually breaks the support of other linkspeeds when
OpenWrt is booted. It also conflicts with the
at803x_platform_data::fixup_rgmii_tx_delay. OpenWrt has to set its own
values in QCA955X_GMAC_REG_ETH_CFG.

The default RGMII values from the Atheros u-boot are currently used to
preset the existing mach files. These may have to be adjusted for boards
using different values but which are not currently set them explicitely in
OpenWrt.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Imre Kaloz <kaloz@openwrt.org>
Cc: Christian Beier <cb@shoutrlabs.com>
Cc: Chris R Blake <chrisrblake93@gmail.com>
Cc: Benjamin Berg <benjamin@sipsolutions.net>
Cc: Heiner Kallweit <hkallweit1@gmail.com>
Cc: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Cc: Matthias Schiffer <mschiffer@universe-factory.net>
Cc: Dirk Neukirchen <dirkneukirchen@web.de>
Cc: Christian Mehlis <christian@m3hlis.de>
Cc: Luka Perkov <luka@openwrt.org>
Cc: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 49029
2016-03-16 09:27:08 +00:00
John Crispin
be68f34708 ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg
Some u-boot versions for QCA955x set currently not cleared bits depending
on the used link speed. This breaks the rx/tx under OpenWrt. The mach-*.c
file is responsible to select the correct configuration bits and thus the
ath79_setup_qca955x_eth_cfg has to clear the unset.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49028
2016-03-16 09:27:04 +00:00
John Crispin
eff9a4b176 ar71xx: Extend the list of bits in QCA955X_GMAC_REG_ETH_CFG
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49027
2016-03-16 09:27:01 +00:00
John Crispin
3fd98db818 ar71xx: Add support for the OMYlink OMY-X1
This patch adds support for the OMYlink OMY-X1

https://wiki.openwrt.org/toh/omylink/omy-x1

http://www.omylink.com/

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 49026
2016-03-16 09:26:58 +00:00
John Crispin
99414dbcf1 ramips: Add support for Xiaomi MiWiFi Nano
Xiaomi MiWiFi Nano is based on Mediatek MT7628 with 64MB ram 16MB flash

Signed-off-by: Noble Pepper <openwrtmail@noblepepper.com>

v3  includes changes suggested by L. D. Pinney & Karl Palsson-
Eliminate en25q64 (4MB) flash chip
Alphabetization
Remove hyphen in model
Rename profile from miwifinano.mk to xiaomi.mk
Add gpios that are attached to leds

SVN-Revision: 49024
2016-03-16 09:26:48 +00:00
John Crispin
553c1b793f brcmfmac: Add Raspberry Pi 3 support
- Enable SDIO support on brcmfmac.
- Disable power managment for brcm2708 target.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49023
2016-03-16 09:26:42 +00:00
Luka Perkov
5a864190f0 kirkwood: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49022
2016-03-14 17:13:22 +00:00
Luka Perkov
b5bcd4cf36 kirkwood: drop 3.18
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49021
2016-03-14 17:12:08 +00:00
Luka Perkov
3ffb5cec14 kirkwood: switch to 4.4
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49020
2016-03-14 17:06:21 +00:00
Luka Perkov
5c457db8e5 kirkwood: add 4.4 support
Dropped patches because they applied upstream:

- 120-iomega_ix2_200.patch
- 150-pogoplug_e02.patch

Tested on dockstar and goflexnet.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 49019
2016-03-14 17:06:20 +00:00
Luka Perkov
76c2c676ec kirkwood/goflexnet/goflexhome: change mtd layout to use the last 3 mb
Previous the uboot was overwriting the device-tree's mtd layout to use
the last 3 mb.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49015
2016-03-14 17:06:15 +00:00
Luka Perkov
ab13a001dd kirkwood/goflexhome/goflexnet: merge "root" and unused mtd partitions into one volume "ubi"
The kernel will automatic attach mtd partitions named 'ubi' to ubi0.
Renaming the "root" partition into "ubi" will safe arguments
from the kernel cmdline.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49014
2016-03-14 17:06:14 +00:00
Luka Perkov
33f76a486d linux/kirkwood: migrate goflexhome/goflexnet to new ubi style
Also using the new image build step format

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49013
2016-03-14 17:06:12 +00:00
Luka Perkov
e9e16bef08 kirkwood/dockstar: rename partition into ubi to use auto detection of target mtd
the kernel tries to use "ubi" or "data" labeled partition to find it's root filesystem.
dockstar don't need anymore mtdparts= nor root= bootarguments

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49011
2016-03-14 17:06:10 +00:00
Luka Perkov
afa1c47e71 kirkwood/dockstar: use ubi(kernel, squashfs, ubifs) images
The new image requires `bootz` because of devicetree appending.
To flash a new image boot initramfs:

  tftpboot 0x800000 openwrt-kirkwood-dockstar-initramfs-kernel.bin
  bootz 0x800000

  # detach if already attached
  ubidetach -p /dev/$(grep ubi /proc/mtd|awk -F: '{print $1}')
  # scp openwrt-kirkwood-dockstar-squashfs-factory.bin /tmp
  ubiformat -f /tmp/openwrt-kirkwood-dockstar-squashfs-factory.bin
  # attach is important to resize rootfs_data otherwise it wont boot
  ubiattach -p /dev/$(grep ubi /proc/mtd|awk -F: '{print $1}')

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49010
2016-03-14 17:06:09 +00:00
Luka Perkov
1b9c171f88 kirkwood: add DEVICE_VAR KERNEL_IN_UBI for kernel as volume in ubi images
depending on KERNEL_IN_UBI, the image.mk will create a ubi volume for the kernel

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49009
2016-03-14 17:06:08 +00:00
Luka Perkov
ef75442989 kirkwood: add feature devicetree
this platform already uses devicetree

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 49008
2016-03-14 17:06:06 +00:00
Rafał Miłecki
210803df03 brcm47xx: image: create standard TRX images using new building system
Apart from using our new building system there are 2 more changes:

1) Limit amount of images
So far we were generating all standard images (optimized one and two
with no loader) for every SUBTARGET. This is not needed, as e.g. the
only device requiring gzipped kernel is legacy Huawei E970.

2) Change output names
The new image building system requires specifying device name. This
forced picking some and resulted in:
openwrt-brcm47xx-$(SUBTARGET)-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-squashfs-gz.trx
openwrt-brcm47xx-$(SUBTARGET)-squashfs-noloader-nodictionary.trx
becoming:
openwrt-brcm47xx-$(SUBTARGET)-standard-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-gz-squashfs.trx
openwrt-brcm47xx-$(SUBTARGET)-standard-noloader-nodictionarylzma-squashfs.trx

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 49006
2016-03-11 21:31:34 +00:00
John Crispin
300be15e84 oxnas: complete NAND driver clean-up
some bit rot was accidentally left-out in r48986, remove it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48997
2016-03-10 21:19:58 +00:00
John Crispin
be79629259 ramips: Add support for GL-MT750
This patch adds support for GL-MT750.
GL-MT750 is powered by MT7620A and MT7610e, dual band 802.11ac, 2.4G 300Mbps and 5G 450Mbps.
It has 5 LANs, MMC interface, USB, a lot of IOs and PoE support.

SVN-Revision: 48994
2016-03-10 19:12:10 +00:00
John Crispin
be53e5a154 ramips: Add support for GL-MT300N
This patch adds support for GL-MT300N.
GL-MT300N is powered by MT7620N with 16MB flash, 64MB RAM,
2 LANs, USB, UART, GPIO and PoE support.

SVN-Revision: 48993
2016-03-10 19:12:04 +00:00
John Crispin
96ee39b184 ramips: Add support for GL-MT300A
This patches adds support for GL-MT300A.
GL-MT300A is powered by MT7620A. It has 16MB flash, 128MB RAM,
Two LANs, USB, UART and MMC daughter board.

SVN-Revision: 48992
2016-03-10 19:11:57 +00:00
John Crispin
61f27ca3e4 oxnas: clean-up NAND driver to fix probing issue
A re-write of the driver based on xway_nand.c and constants as
well as the cmd_ctrl() function from the original oxnas_nand.c
resulted in a extremely similar looking file (see diffsize),
and fixes the issue of NAND not being detected on newer kernels.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48986
2016-03-10 19:11:28 +00:00
John Crispin
f78f271c1e brcm2708: update patches to latest version
As usual these patches were extracted from the raspberry repo:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

- Disable unused MFD RPISENSE driver.
- Disable ethernet HW checksums in order to avoid kernel exceptions.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48985
2016-03-10 19:11:23 +00:00
John Crispin
05d73a2a73 ar71xx: Arduino Yun board 'WLAN RST' button support
This patch adds support for Arduino Yun board "WLAN RST" button.

Signed-off-by: Hirokazu MORIKAWA <morikw2@gmail.com>

SVN-Revision: 48983
2016-03-10 19:11:13 +00:00
John Crispin
69b28c5382 brcm63xx: fix BCM3368 interrupt controller addresses
Looks like the addresses for BCM3368 were wrongly defined when DT
support was introduced.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48980
2016-03-10 19:10:58 +00:00
John Crispin
01ca7a34f0 brcm63xx/lzma-loader: fix O32 ABI conformance
According to the calling convention of the o32 ABI the caller
function must reserve stack space for $a0-$a3 registers in case
the callee needs to save its arguments.

The assembly code of the loader does not reserve stack space for
these registers thus when the 'loader_main' function needs to save
its arguments, those will be stored in the 'workspace' area instead
of the stack.

Because the workspace area is also used by other part of the code, the
saved register values gets overwritten and this often leads to failed
kernel boots.

Fix the code to reserve stack space for the registers to avoid this
error.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
[noltari: apply the fix for brcm63xx too]
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48979
2016-03-10 19:10:54 +00:00
John Crispin
346b1905fb ar71xx: add support for the Telldus TellStick ZNet Lite
Signed-off-by: Micke Prag <micke.prag@telldus.se>

SVN-Revision: 48977
2016-03-10 19:07:26 +00:00
Rafał Miłecki
4e6e23582b brcm47xx: image: move disabled devices to the new building system
This only drops WGR614 V9 which has 2 MiB flash and it's unlikely to get
any interest.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48975
2016-03-09 06:34:29 +00:00
Rafał Miłecki
9a6ad203f6 brcm47xx: image: switch Linksys WRT54G3GV2-VF to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48974
2016-03-09 06:34:25 +00:00
Rafał Miłecki
ee76a07fbf brcm47xx: image: switch Netgear WGT634U to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48973
2016-03-08 18:33:25 +00:00
Rafał Miłecki
0d3da888d2 brcm47xx: image: switch rest of 64k block devices to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48972
2016-03-08 18:33:22 +00:00
Rafał Miłecki
5e2930a888 brcm47xx: image: switch Motorola devices to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48971
2016-03-08 18:33:19 +00:00
Rafał Miłecki
6eb0df3543 brcm47xx: image: switch D-Link DWL-3150 to the new building system
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48970
2016-03-08 18:33:16 +00:00
John Crispin
1b9985cfe2 ramips: add support for Planex MZK-WDPR.
add support for Planex MZK-WDPR.
MZK-WDPR(MZK-WDPR-R01) is internet radio tuner.
This patch is "network board" in MZK-WDPR.
LCD board is non OpenWrt Platform.

Signed-off-by: YuheiOKAWA <tochiro.srchack@gmail.com>

SVN-Revision: 48968
2016-03-08 18:11:59 +00:00
John Crispin
993989880a brcm2708: add Raspberry Pi 3 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48967
2016-03-08 18:11:55 +00:00
John Crispin
cd2114e19c brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48966
2016-03-08 18:11:49 +00:00
Rafał Miłecki
baf0b18653 bcm53xx: update bcm47xx_sprom to the latest 4.6 queued version
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48963
2016-03-08 11:05:10 +00:00
Rafał Miłecki
81edbe39b8 bcm53xx: fix SPROM driver compilation with ssb/bcma as module
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48962
2016-03-08 08:29:32 +00:00
Rafał Miłecki
9f116fae92 bcm53xx: revert patch removing imprecise abort workaround
It seems it still happens on some devices.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48961
2016-03-08 08:29:29 +00:00
Rafał Miłecki
0e2f0196a2 kernel: backport bcma 4.6 changes for flashes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48960
2016-03-07 23:09:26 +00:00
Felix Fietkau
b9f52b6b86 kernel: add MIPS kernel fix for an uninitialized CPU map
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48956
2016-03-07 21:00:46 +00:00
Felix Fietkau
46c7d0d1ab kernel: remove linux 4.3 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48955
2016-03-07 17:56:58 +00:00
Felix Fietkau
3abf5ce656 ramips: convert the remaining subtargets to 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48954
2016-03-07 17:56:53 +00:00
Felix Fietkau
f73d8fb81b ramips: fix subtarget kernel version assignment (only mt7621 is ready for now)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48953
2016-03-07 17:05:03 +00:00
Felix Fietkau
d041e8b44b ramips: add linux 4.4 support, update mt7621 subtarget to 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48951
2016-03-07 16:33:34 +00:00
Felix Fietkau
dc3a7131a9 lantiq: print profile name in dsl lucistat
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48949
2016-03-07 11:03:44 +00:00
Felix Fietkau
06b630047f lantiq: add dsl firmware to default packages
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48942
2016-03-07 11:03:21 +00:00
Felix Fietkau
4ac99abeb3 lantiq: do not set default firmware file
We are now shipping a DSL firmware, do not set it by default to some
file name.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48941
2016-03-07 11:03:18 +00:00
Felix Fietkau
4802f611cb ar71xx: fix qca956x ethernet initialization
Complete internal switch initialization for QCA956X.
Set default mdio device if the interface mode of GE0 is not SGMII (fix ticket #21520).

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 48937
2016-03-07 08:45:01 +00:00
Felix Fietkau
c865ae03f6 ar71xx: enable USB packages for WNR2200 (fixes #21984)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48936
2016-03-06 19:40:31 +00:00
Rafał Miłecki
dab0569b97 bcm53xx: use SPROM driver queued for 4.6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48935
2016-03-06 18:08:03 +00:00
Hauke Mehrtens
e9d7ee4f41 kernel: update kernel 4.4 to version 4.4.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48933
2016-03-05 17:51:37 +00:00
Hauke Mehrtens
21cf64b4ad kernel: fix section mismatch in crashlog
The function memblock_insert_region() is in the section
__init_memblock, also put crashlog_init_memblock there.

This fixes this section mismatch warning:
The function memblock_insert_region.isra.1() references
the function __meminit crashlog_init_memblock().
This is often because memblock_insert_region.isra.1 lacks a __meminit
annotation or the annotation of crashlog_init_memblock is wrong.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48931
2016-03-05 16:23:50 +00:00
Hauke Mehrtens
683c046673 kernel: add missing config options
The buildbots complained about these config options being missing for arm64:
CONFIG_DUMMY_CONSOLE_COLUMNS=80
CONFIG_DUMMY_CONSOLE_ROWS=25

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48929
2016-03-05 16:22:45 +00:00
Felix Fietkau
3f971c0dc8 ar71xx: WNR612v2: enable control of all LEDs and buttons
This patch provides full GPIO support for WNR612v2 (LEDs and buttons).
It exposes all LEDs to operating system, including Ethernet ones.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48924
2016-03-05 09:45:15 +00:00
Felix Fietkau
94b8a6b5cf ar71xx: WNR2000v3: add speed_mask to Ethernet port LED initialization
This patch add speed_mask parameter to Ethernet port LED initialization
during system startup. LEDs are configured to show amber light for 10 Mbps
link and green for 100 Mbps as described on device label.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48923
2016-03-05 09:45:10 +00:00
Felix Fietkau
53b3872ddf ar71xx: WNR2000v3: enable control of all LEDs and buttons
This patch provides full GPIO support for WNR2000v3 (LEDs and buttons).
It exposes all LEDs to operating system, including Ethernet ones.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48922
2016-03-05 09:45:06 +00:00
Felix Fietkau
6bece706ec mac80211: ath9k: enable GPIO buttons
Enable platform-defined GPIO button support for ath9k device.
Key poller is activated for attached platform buttons.
Requires ath9k GPIO chip access.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48921
2016-03-05 09:45:03 +00:00
John Crispin
fbb2449953 AP121 target: fix board detection in ar71xx.sh
Signed-off-by: Attila Lendvai <attila@lendvai.name>

SVN-Revision: 48916
2016-03-04 08:33:38 +00:00
John Crispin
3a03c08c82 AR8216: improve mmd register access
Combine all bus operations for one MMD access in one function.
Protecting all these bus operations with one lock also helps
to avoid potential issues due to bus operations intercepting
the register and data write.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48914
2016-03-04 08:33:33 +00:00
John Crispin
d3776bdfc9 AR8216: make ARL age time configurable
The default TTL for address resolution table entries is 5 minutes
for all members of the AR8216 family. This can cause issues if
e.g. Wifi clients roam to another AP and their MAC appears on
another switch port suddenly. Then the client may not be reachable
until the old ARL entry expires.
I would have expected the switch to invalidate old entries if it
detects the same MAC on another port. But that's not the case.

Therefore make the TTL for ARL entries configurable.
The effective TTL will always be a multiple of 7 seconds.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48913
2016-03-04 08:33:30 +00:00
John Crispin
4eaa750089 AR8216: remove redundant port number in MIB header line
The line before includes the port number anyway so there's no need
to duplicate the port number in the MIB info header.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48912
2016-03-04 08:33:28 +00:00
John Crispin
f03ec2baf7 AR8216: complement MIB counters with info in GiB / MiB / KiB
The decimal values especially for TxByte and RxGoodByte are hard to read
once bigger amounts of data have been transferred.
Therefore complement the decimal values with info in GiB / MiB / KiB.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48911
2016-03-04 08:33:25 +00:00
John Crispin
76e1efc042 AR8216: don't display MIB counters if all are empty
For unused switch ports all MIB values are zero. Displaying ~40 empty
MIB counters is just confusing and makes it hard to read the output of
swconfig dev <dev> show.
Therefore, if all MIB counters for a port are zero, just display
an info that the MIB counters are empty.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 48910
2016-03-04 08:33:22 +00:00
John Crispin
f07a57c0e8 imx6: image: Add missing kernel prefix
Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 48909
2016-03-04 08:33:20 +00:00
John Crispin
77da9390da ramips: mt7621: fix WF-2881 for ubi split
This patch fix firmware split for WF-2881 which was previously manually partitioned.

Signed-off-by: YounJae Rho <luxflow@live.com>

SVN-Revision: 48908
2016-03-04 08:33:17 +00:00
John Crispin
9d828931f1 ramips: Add profiles for JCG routers
This patch adds profiles and support for building factory and
sysupgrade images for JHR-N805R, JHR-N825R and JHR-N926R.

Signed-off-by: Reinhard Max <reinhard@m4x.de>
Reviewed-by: Torsten Duwe <duwe@lst.de>

SVN-Revision: 48906
2016-03-04 08:33:12 +00:00
John Crispin
43dd2b9965 ramips: Add JCG routers to base-files
This patch adds support for JHR-N805R, JHR-N825R and JHR-N926R to
various scripts in the base-files directory.

Signed-off-by: Reinhard Max <reinhard@m4x.de>
Reviewed-by: Torsten Duwe <duwe@lst.de>

SVN-Revision: 48905
2016-03-04 08:33:09 +00:00
John Crispin
ca64f498f0 ramips: Add device tree for JCG JHR-N926R
Add a device tree for JCG JHR-N825R

This router is based on a RT3052 and has 4MB of CFI flash and 32MB of
SDRAM. As a special feature, it comes with a two digit seven segment
display that is connected to a pair of daisy-chained 74164 shift
registers that can be controlled via GPIOs.

For details, see https://wikidevi.com/wiki/JCG_JHR-N825R .

Signed-off-by: Reinhard Max <reinhard@m4x.de>
Reviewed-by: Torsten Duwe <duwe@lst.de>

SVN-Revision: 48904
2016-03-04 08:33:06 +00:00
John Crispin
97ca4cbc94 ramips: Add device tree for JCG JHR-N825R
Add a device tree for JCG JHR-N825R

This router is based on a RT3052 and has 4MB of CFI flash and 32MB of
SDRAM. For details, see https://wikidevi.com/wiki/JCG_JHR-N825R .

Signed-off-by: Reinhard Max <reinhard@m4x.de>
Reviewed-by: Torsten Duwe <duwe@lst.de>

SVN-Revision: 48903
2016-03-04 08:33:03 +00:00
John Crispin
73f4c3f2ab ramips: Add device tree for JCG JHR-N805R
Add a device tree for JCG JHR-N805R

This router is based on a RT3050 and has 4MB of SPI flash and 16MB of
SDRAM. For details, see https://wikidevi.com/wiki/JCG_JHR-N805R .

Signed-off-by: Reinhard Max <reinhard@m4x.de>
Reviewed-by: Torsten Duwe <duwe@lst.de>

SVN-Revision: 48902
2016-03-04 08:33:00 +00:00
John Crispin
e4dc6acd31 ramips: Incorrect file mode change
Commit d0f5ab6d95a1 ("ramips: Added support for ZBT-826 / ZBT-1026")
incorrectly changed the mode of the ramips shell scripts from 755 to 644.
I.e., they are not excutable any more and for example devices will be left
with broken configs.

Signed-off-by: Kristian Evensen <kristian.evensen@gmail.com>

SVN-Revision: 48893
2016-03-03 20:24:45 +00:00
John Crispin
74c6b21973 target/mpc85xx: check for 'generic' subtarget for initramfs image file
Copy 'cuImage.tl-wdr4900-v1-initramfs' only for the 'generic' subtarget.
This is a follow-up to:
 http://git.openwrt.org/?p=openwrt.git;a=commitdiff;h=b889fe55c1844aec2c03da28fecb03e958c21f18

We build our initramfs images more rarely, so it took a while
to catch this too.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 48892
2016-03-03 20:24:41 +00:00
Felix Fietkau
15517811e4 ramips: enable mt76 on mt7688 by default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48886
2016-03-02 17:40:58 +00:00
Felix Fietkau
a8c15c0204 mac80211: ath9k: enable platform WLAN LED name
Enable platform-supplied WLAN LED name for ath9k device.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>
Acked-by: Hartmut Knaack <knaack.h@gmx.de>

SVN-Revision: 48879
2016-03-02 13:22:40 +00:00
Hauke Mehrtens
7768735873 kernel: update kernel 3.18 to version 3.18.27
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48874
2016-03-01 23:16:17 +00:00
John Crispin
7d008e8bf0 ar71xx: Add OOLITE to the Gainstrong profile, removed standalone profile.
This patch moves the OOLITE profile code into the overarching Gainstrong
profile and deletes the old single profile file.

Signed-off by: Stijn Segers <francesco.borromini@inventati.org>

SVN-Revision: 48866
2016-03-01 09:17:09 +00:00
John Crispin
96eb5c6fa8 ramips: Added support for ZBT-826 / ZBT-1026
Support for these MT7620-based routers: https://wiki.openwrt.org/toh/zbt/we-826
Based on Oskari’s patches found here: https://dev.openwrt.org/ticket/19996

Signed-off-by: Jamie Stuart <jamie@onebillion.org>

SVN-Revision: 48865
2016-03-01 09:17:06 +00:00
Felix Fietkau
619a58d641 ar71xx, firmware-utils: split ubdev01 flash layout from XM
The ubdev01 profile defines its own MTDPARTS with smaller firmware
partition, so give it its own UBNT_BOARD in mkfwimage.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 48828
2016-02-29 20:11:30 +00:00
Felix Fietkau
28458bd057 ramips: add sysupgrade support for mt7628
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48813
2016-02-28 15:46:27 +00:00
Felix Fietkau
dc6533d982 ramips: create device tree node for MT7628 WMAC in preparation for future work on driver support in mt76
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48812
2016-02-28 13:21:54 +00:00
Felix Fietkau
ce9dc109a4 Revert "ar71xx: WNR612v2: exclude USB modules from image"
This reverts commit r48778. The issue has now been fixed properly

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48808
2016-02-26 20:47:13 +00:00
Rafał Miłecki
578e8d6c58 kernel: use upstream accepted bcm47xxpart patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48805
2016-02-26 11:12:50 +00:00
Felix Fietkau
1185e645a7 kernel: disable MIPS VDSO by default until the cache issues have been resolved
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48802
2016-02-26 09:49:32 +00:00
John Crispin
ae27fab5cf ar71xx: Renamed Gainstrong MiniBox profile to Gainstrong (manufacturer) and updated copyright
This is the first patch of a series of three to tidy up the profiles for
Gainstrong devices. Right now there are two Gainstrong profiles, each
for a single device built by this manufacturer. This patch renames the
MiniBox profile to Gainstrong and updates the copyright notice.

The series applies cleanly to current trunk. Resent with the architecture in
the subject, forgot that the first time.

Signed-off by: Stijn Segers <francesco.borromini@inventati.org>

SVN-Revision: 48797
2016-02-26 08:35:38 +00:00
John Crispin
f998540e80 ramips: fix GPIO names for RT5350F-OLinuXino-EVB
Hi,

the board in subject (RT5350F-OLinuXino-EVB) still ships from vendor
with a RC3 image built upon a .dts file which declares GPIO12 and GPIO14
as relay2 and relay1 respectively, as you can see from their rt5350f
branch on GitHub.

For some reason in the official stable build both the GPIOs are swapped
and the wrong names are declared in the gpio-export directive.

I'm submitting this patch which should roll back the wrong changes, so
that we get backward compatibility with any script developed on RC3
which controls the relays.

After patching correct operation is restored:

root@OpenWrt:/# cat /sys/kernel/debug/gpio
GPIOs 0-21, platform/10000600.gpio, 10000600.gpio:
 gpio-0   (button              ) in  hi
 gpio-12  (relay2              ) out lo
 gpio-14  (relay1              ) out lo

Thank you,

Signed-off-by: Lorenzo Cafaro <lorenzo@ibisco.net>

SVN-Revision: 48796
2016-02-26 08:35:35 +00:00
John Crispin
cbfec477ce mpc85xx/tl-wdr4900: correct address of the gpio controller
since linux 3.19 the address of the gpio-controller changed

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 48794
2016-02-26 08:35:29 +00:00
Hauke Mehrtens
eea54160a1 kernel: deactivate the vdso gettimeofday function.
The vdso version of this function has some problems with the cache.
Very often it works on dated data which causes problem. We are
currently working on fixing this in upstream Linux kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48787
2016-02-25 22:31:51 +00:00
Hauke Mehrtens
cb04b8d582 kernel: update kernel 4.4 to version 4.4.3
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48783
2016-02-25 21:54:39 +00:00
Felix Fietkau
5be9e97a82 ar71xx: WNR612v2: fix for random WLAN MAC
Fix for invalid/random WLAN MAC address in WNR612v2. Permanent platform
MAC is calculated and assigned during system startup. WLAN MAC follows
wired Ethernet interface addresses. This is the same fix as for WNR2000v3.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48779
2016-02-25 13:31:38 +00:00
Felix Fietkau
e0d358c436 ar71xx: WNR612v2: exclude USB modules from image
Netgear WNR612v2 has no USB port yet default system image
includes USB kernel modules. This patch fixes that.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48778
2016-02-25 13:31:35 +00:00
Felix Fietkau
3964ac919a ar71xx: WNR2000v3: fix for random WLAN MAC
Fix for invalid/random WLAN MAC address in WNR2000v3. Permanent platform
MAC is calculated and assigned during system startup. WLAN MAC follows
wired Ethernet interface addresses.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48777
2016-02-25 13:31:32 +00:00
Felix Fietkau
d527b82862 switch: allow Ethernet port LEDs to show specific port speeds only
This patch adds speed_mask special file to LEDs connected to switch ports
via 'switch' trigger. It allows to choose which speeds to signal when link
is up. If router has more than one LED per port, they may light up
differently depending on how fast connection is. Default setting is 'all
speeds' so backward compatibility with system scripts (for example uci) is
maintained.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48775
2016-02-25 13:31:26 +00:00
Felix Fietkau
f61a80444c switch: make LED port_mask file write handler use kstrtoul() function
This patch changes swconfig_trig_port_mask_store() handler to utilize
kstrtoul() function instead of call to obsolete simple_strtoul(). Thanks
to this change, new handler takes less memory and makes port_mask special
file accept not only hexadecimal, but also decimal and octal numbers.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48774
2016-02-25 13:31:23 +00:00
John Crispin
074cc7ac38 ramips: mt7620: fix failsafe switch config
As indicated in the bug tracker[1], failsafe mode is broken on at least some
devices using the mt7620 switch (and possibly mt7621). The thread explicitly
mentions the Xiaomi MiWifi, and the Nexx WT3020, and an unspecified device
using the mt7621 switch; the issue also applies to the Netgear EX2700.

The problem is that failsafe mode uses eth0, but enable_vlan is always set to 1
by the switch driver. Connecting to and/or pinging the device fails. This patch
fixes the failsafe preinit config, by making sure that vlan support is disabled.
It currently only fixes the switch config on mt7620, but might apply to the
mt7621 as well, so the patch has been designed with this in mind.

A similar (line wrapped) patch was submitted in December by Simon Peter, but never
accepted and/or discussed.

This patch applies to both Chaos Calmer and trunk.

[1] https://dev.openwrt.org/ticket/18768

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>

SVN-Revision: 48772
2016-02-25 10:14:22 +00:00
John Crispin
cb49742f99 ramips: build factory images for Netgear EX2700
This patch adds support for building factory and sysupgrade images
for the Netgear EX2700 that don't require modification of u-boot
environment variables.

The bootloader on this device expects the kernel partition to end
on a 64k block boundary. The last 64 byte of the kernel partition
must contain a valid uImage header - in the stock firmware, this is
the uImage header of the root filesystem. For this patch, we're using
the uImage header of a 0 byte partition (ex2700-fakeroot.uImage).

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>

SVN-Revision: 48771
2016-02-25 10:14:19 +00:00
John Crispin
56714adb4b ar71xx: correct imagename for TPlink WA730RE
- insert missing "-" to separate model and version

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>

SVN-Revision: 48769
2016-02-25 10:14:13 +00:00
John Crispin
2a58dbda98 ar71xx: correct imagename for TPlink WA701ND
- it seems there was never a 701N-model build

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>

SVN-Revision: 48768
2016-02-25 10:14:11 +00:00
John Crispin
bf49188bb1 ar71xx: matchup of TPlink WR841N(D)-names
- remove the suffix (N, ND) to indicate that the image is for all
  WR841-models
- some of these models have a "N"-suffix, others have (ND)-suffix,
  but the boards are the same - only difference is the detachable
  antenna on "D"-models
- discussed this idea to remove the suffix in IRC with jow and Borromini

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>

SVN-Revision: 48767
2016-02-25 10:14:08 +00:00
John Crispin
0834f9f076 brcm2708: remove linux 4.1 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48766
2016-02-25 10:14:05 +00:00
John Crispin
b3dc9566a4 brcm2708: switch to linux 4.4 and update patches
As usual these patches were extracted from:
https://github.com/raspberrypi/linux/commits/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 48765
2016-02-25 10:14:01 +00:00
Zoltan Herpai
9c0d3fcf82 sunxi: add descriptor files for wifi+bt modules (AP6181/6210), add brcmfmac to bananapro profile
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48757
2016-02-24 23:31:48 +00:00
Rafał Miłecki
9e9617a864 kernel: replace bgmac patches for BCM47094 with final ones
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48756
2016-02-24 22:43:43 +00:00
Rafał Miłecki
319863f60e kernel: mtdsplit: support uimage with UBI
This patch adds uimage firmware split support for ubi.

Signed-off-by: YounJae Rho <luxflow@live.com>

SVN-Revision: 48755
2016-02-24 22:43:16 +00:00
Rafał Miłecki
1a57ce0c03 kernel: mtdsplit: add missing digest field to Seama header
Seama format has 2 similar headers: container (seal) header and entity
header. The first one has size always set to 0 and doesn't contain MD5
digest.

When dealing with Seama on a flash we deal directly with an entity. You
can see mtdsplit_parse_seama reads from offset 0 and expects entity to
be there. Seama container is used by bootloader / interface only which
extract entity out of it and flash it.

That said we should fix our header struct. This is important as we
calculate possible rootfs offset assuming it may be placed right after
Seama entity. So far calculate offset was always 16B too low.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48754
2016-02-23 14:40:40 +00:00
Felix Fietkau
29bbc6e6be ar71xx: reset ethernet tx ring on fast reset to prevent packet loss / irq issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48753
2016-02-22 15:11:23 +00:00
Felix Fietkau
0ec9253b9d ramips: fix WSR-1166 partition table
- Fix typo in board_data partition start address
- Increase board_data partition size in order to exploit all flash size

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>

SVN-Revision: 48751
2016-02-22 08:54:32 +00:00
John Crispin
fc47eb0794 ralink: fix mt7628 ehci support
the u2_phy init was missing

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48747
2016-02-19 16:38:04 +00:00
John Crispin
1e218001b5 ralink: unbreak port4 on mt7620
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48746
2016-02-19 16:37:56 +00:00
Jo-Philipp Wich
c834c83f0f ar71xx: add missing symbol to Linux 4.4 config (#21878)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48742
2016-02-18 12:09:34 +00:00
John Crispin
cb5711d72a archs38: remove network config override
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48741
2016-02-18 08:35:21 +00:00
John Crispin
73015c4cb3 linux: add support of Synopsys ARCHS38-based boards
This patch introduces support of new boards with ARC HS38 cores.

ARC HS38 is a new generation of ARC cores which utilize ARCv2 ISA.
As with ARC770 we're addind support for 2 boards for now:

 [1] Synopsys SDP board (AXS103)
     This is the same base-board as in AXS101 but with
     FPGA-based CPU-tile where ARCHs38 core is implemented.

 [2] nSIM
     Again this is the same simulation engine but configured for
     new instruction set and features of new CPU.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48740
2016-02-18 08:22:32 +00:00
Luka Perkov
4d966e4dde mvebu: add SolidRun ClearFog A1 support
Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr>

SVN-Revision: 48736
2016-02-17 17:49:26 +00:00
John Crispin
dbd35c7ca9 kernel: add missing symbols to config-4.4
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48730
2016-02-16 16:25:49 +00:00
John Crispin
717bbc3550 at91: udc driver was missing deps
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48726
2016-02-16 16:25:16 +00:00
John Crispin
e4db453eab mvebu: add missing symbols.
this broke full builds of the mvebu target

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48725
2016-02-16 16:25:10 +00:00
John Crispin
8b38a9450b ramips: Add support for Phicomm PSG1208
This patch adds support for Phicomm PSG1208.This is a router with MT7620A SoC with 8M flash and 64M ram.
The WPS led is uesd as status_led because the power light can't be controlled with GPIO.
It seems that the 5g wifi led is connected to MT7612E and it can't be controlled with GPIO too.

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>

SVN-Revision: 48721
2016-02-15 18:45:22 +00:00
Jo-Philipp Wich
473e9cad43 ar71xx: add missing kernel symbol (#21849)
Also reorder subtarget kernel configs.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48717
2016-02-12 19:55:07 +00:00
John Crispin
ba53b33453 ramips: Support LEDs on D-Link DIR-860L B1
Adds the required gpio definitions.

Signed-off-by: Johannes Wienke <languitar@semipol.de>

SVN-Revision: 48715
2016-02-12 09:29:23 +00:00
John Crispin
cede06cebc ar71xx: Support for Ubiquiti UniFi AP AC LITE
Add support for the Ubiquiti UniFi AP AC LITE
Signed-off-by: P.Wassi <p.wassi at gmx.at>

SVN-Revision: 48711
2016-02-12 08:31:32 +00:00
John Crispin
13a85914ae ar71xx: Make code formatting consistent on ath79/machtypes.h
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>

SVN-Revision: 48706
2016-02-12 08:30:38 +00:00
John Crispin
d6cb792d21 ar71xx: Added support for TL-WA801NDv3
Signed-off-by: Tiziano Bacocco <tizbac2@gmail.com>

SVN-Revision: 48705
2016-02-12 08:30:28 +00:00
John Crispin
9cf8461394 ar71xx: WNR2000v3: exclude USB modules from image
Netgear WNR2000v3 has no USB port yet default system image
includes USB kernel modules. This patch fixes that.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 48701
2016-02-12 08:29:54 +00:00
John Crispin
48f82b53d0 use "-gt" instead of ">" with [ in /lib/functions/lantiq_dsl.sh
Avoids inadvertent file creation when executing
`/etc/init.d/dsl_control status`.

Signed-off-by: Jonathan A. Kollasch <jakllsch@kollasch.net>

SVN-Revision: 48700
2016-02-12 08:29:44 +00:00
John Crispin
9f9682a79b ramips: Add support for Netgear EX2700
This patch adds support for the Netgear EX2700 and builds an approriate
sysupgrade image.

What's missing is the option to build a factory image flashable via the
router's stock web interface, but this approach is hindered by the fact
that u-boot operforms an additional integrity check, which expects a
uImage header in the last 64 bytes of the "kernel" partition, which
the bootloader expects to be 960k, a size exceeded by the standard
OpenWrt kernel.

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>

SVN-Revision: 48698
2016-02-12 08:29:33 +00:00
John Crispin
2d45ad07fc zynq: add new target
Add support for Xilinx ZC702 Dev board

Zynq target is using 4.4 kernel and mainline 2016.1 u-boot.

Patch is tested with Xilinx ZC702 Dev board with SD boot mode.

known issues:
 - no QSPI driver in 4.4 kernel: no QSPI flash support
 - USB is not working in 4.4 kernel

Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

 create mode 100644 package/boot/uboot-zynq/Makefile
 create mode 100644 target/linux/zynq/Makefile
 create mode 100644 target/linux/zynq/base-files.mk
 create mode 100755 target/linux/zynq/base-files/etc/board.d/02_network
 create mode 100644 target/linux/zynq/base-files/etc/config/network
 create mode 100644 target/linux/zynq/base-files/etc/inittab
 create mode 100644 target/linux/zynq/config-4.4
 create mode 100644 target/linux/zynq/image/Makefile
 create mode 100755 target/linux/zynq/image/mkits.sh
 create mode 100644 target/linux/zynq/patches-4.4/0001-arm-dts-zynq-zc702.dts-Set-default-rdinit-to-sbin-in.patch
 create mode 100644 target/linux/zynq/profiles/zc702.mk

SVN-Revision: 48697
2016-02-12 08:29:24 +00:00
Felix Fietkau
376e3ade79 ag71xx: fix build error with debugfs code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48695
2016-02-11 22:48:36 +00:00
Felix Fietkau
37dd95b772 ag71xx: increase rx ring size to improve performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48694
2016-02-11 15:02:07 +00:00
Felix Fietkau
11ca71cfdb ag71xx: store ring size order instead of ring size to avoid div/mod
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48693
2016-02-11 15:02:00 +00:00
Felix Fietkau
033fbb7778 ag71xx: increase tx ring size to improve performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48692
2016-02-11 15:01:54 +00:00
Felix Fietkau
b7a2c533da ag71xx: optimize icache footprint of the receive poll function
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48691
2016-02-11 15:01:48 +00:00
Felix Fietkau
2c17b8bcc5 kernel: fix uninitialized variable in bridge multicast-to-unicast patch on 4.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48690
2016-02-11 15:00:19 +00:00
Jo-Philipp Wich
2d04407e40 mvebu: fix WRT1900AC v1 LED driver module
Update OpenWRT build tree to reflect changes in TLC-591xx LED family driver.

In kernels < 4.0 the driver was present in form of a patch for the TLC-59116 chip,
and was upstreamed later in kernels > 4.0 to support the entire chip family.

Signed-off-by: Sebastian Careba <nitroshift@yahoo.com>
[jow: fix Kconfig symbol name]
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48684
2016-02-09 12:33:53 +00:00
Jo-Philipp Wich
4aeeead303 x86: preserve partition table on sysupgrade
With this patch sysupgrade will write directly to the partitions
instead of to the main disk.  The UUID is copied from the image
to the MBR as well.  This prevents the mbr from being completely
overwritten and losing the partition table.  The -p option has
been added to maintain the original behavior and overwite the
entire disk with the new image.  Tests have been added to ensure
that the image partitions match up with the active partitions.

Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>

SVN-Revision: 48682
2016-02-09 12:33:17 +00:00
Felix Fietkau
6b73b7a8ec ramips: fix build error on oversized images by putting the dir-860l-b1 size check at the end of the chain
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48681
2016-02-08 19:18:21 +00:00
Jo-Philipp Wich
d07d65ec30 generic: add missing kconfig symbol
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48675
2016-02-08 14:28:29 +00:00
Jo-Philipp Wich
6ec31a8487 x86: remove unrelated config override
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48668
2016-02-08 10:58:27 +00:00
John Crispin
e68281e613 brcm2708: add missing symbols
enable CONFIG_PWM
enable the RASPI PWM stuff
fix buildbot w. 4.1

compile tested only

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 48667
2016-02-08 09:22:56 +00:00
John Crispin
6801c4e33e ramips: HLK-RM04 - Enable GPIO14 for WPS button
The top half of UARTF on the HLK-RM04 is used for GPIO.

  mode 1   mode 2
   RIN     GPIO14
   DSR_N   GPIO13
   DCD_N   GPIO12
   DTR_N   GPIO11
   RXD     GPIO10
   CTS_N   GPIO09
   TXD     GPIO08
   RTS_N   GPIO07

This patch applies 3'b101 mode to UARTF:

   GPIO14
   GPIO13
   GPIO12
   GPIO11
   RXD
   CTS_N
   TXD
   RTS_N

Because the base rt5350.dtsi file forces 3'b000 mode, remove the pin setting from this file and apply it directly to the files that inherit from it (WIZFI630A.dts and WT1520.dtsi).  This change makes the rt5350.dtsi file consistent with the mt7620a.dtsi file.

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48665
2016-02-08 08:26:27 +00:00
John Crispin
7f672e66f8 rampis: HLK-RM04 - Setup I2C as GPIO
The I2C function of the RT5350 SoC on the HLK-RM04 is used for GPIO1 and GPIO2.

Take note that the I2C_SD pin is GPIO1 on the RT5350 and is exposed on the HLK-RM04 as GPIO0
Likewise the I2C_SCLK pin is GPIO2 on the RT5350 and is exposed on the HLK-RM04 as GPIO1

 group   mode 1    mode 2   hlk-rm04 pin & export
  i2c    i2c_sd    gpio1   (pin 8, hlk-rm04:gpio0)
  i2c    i2c_sclk  gpio2   (pin 9, hlk-rm04:gpio1)

reference:
  http://www.hlktech.net/product_detail.php?ProId=39
  http://cdn.sparkfun.com/datasheets/Wireless/WiFi/RT5350.pdf

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48664
2016-02-08 08:26:19 +00:00
John Crispin
480e15f2ce ramips: HLK-RM04 - Fix push button functions
The RESET button of the HLK-RM04 is connected to GPIO0, linux function 0x198
The WPS button of the HLK-RM04 is connected to GPIO14, linux function 0x211

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48663
2016-02-08 08:26:11 +00:00
John Crispin
1f26091242 ramips: HLK-RM04 - Remove power LED config
The power LED on the HLK-RM04 is hard wired to the power bus and is not under GPIO control, remove the bogus config for it.
(Note that GPIO0 is actually connected to the RESET button.)

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48662
2016-02-08 08:26:02 +00:00
John Crispin
a0e8833cb5 lantiq: VGV7510KW22/VGV7519 update spi pinmux group
With the backport of the kernel 4.5 pinctrl-xway patches (3551609d &
826bca29) the pinmux group "spi" was splitted into "spi_di", "spi_do" &
"spi_clk". But the no longer existing group "spi" is still used by some
device tree source files.

This fixes the detection of the wireless chipset of the VGV7510KW22.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48658
2016-02-08 08:25:31 +00:00
John Crispin
7c0009a52e lantiq: BTHOMEHUBV5A - explicit select the flash device
The stock u-boot doesn't disable unused flash banks. Therefore, the nand
driver tries to initialize a not connected NOR flash and the device
hangs on boot.

Workaround the issue by selecting the second flash bank (NAND).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>
Acked-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48657
2016-02-08 08:25:22 +00:00
John Crispin
c3fc71527d lantiq: fix wrong parameter order in xway_nand driver
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48656
2016-02-08 08:25:15 +00:00
Felix Fietkau
b1431170ee ar71xx: register only the built-in switch MDIO bus, hook up eth0 to it, should hopefully fix regression reported in #21520
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48652
2016-02-07 21:00:11 +00:00
Felix Fietkau
a63fd6faf7 ar71xx: fix MDIO bus probe on QCA956x
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48651
2016-02-07 21:00:01 +00:00
Felix Fietkau
a5dd378a0e ar71xx: fold patch 622-MIPS-ath79-add-support-for-QCA956x-ethernet.patch into files/
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48650
2016-02-07 20:59:51 +00:00
Felix Fietkau
32dea5d2a9 mpc85xx: fix TL-WDR4900 mac address assignment to match original firmware
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48645
2016-02-07 14:18:36 +00:00
Rafał Miłecki
406a288a3b bcm53xx: add Netgear R8500 GPIOs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48633
2016-02-05 12:33:50 +00:00
Felix Fietkau
0fddb7f767 kernel: add missing config symbol (#21797)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48632
2016-02-05 11:50:50 +00:00
Zoltan Herpai
42cd31a777 sunxi: update orangepi-plus profile to reflect the real uboot package
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48626
2016-02-03 23:57:35 +00:00
Rafał Miłecki
3b76c7cf0b bcm53xx: start working on Netgear R8500
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48625
2016-02-03 22:32:07 +00:00
Rafał Miłecki
6831bac31f b53: support setting port link
When dealing with Broadcom hardware we can simply use swconfig's generic
helper, we just need to do some validation of requested state.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48623
2016-02-03 09:33:56 +00:00
Rafał Miłecki
b3c3542515 b53: provide PHY access to swconfig
Thanks to this change swconfig can access port PHYs e.g. when setting
port link state with a generic helper.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48622
2016-02-03 09:33:50 +00:00
Rafał Miłecki
19b9e14c47 swconfig: add (PHY) generic helper setting port link
It's quite common for switches to have PHY per port so adding a generic
helper setting link state will help many drivers. It just needs an API
to access PHYs which this patch also adds.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48621
2016-02-03 09:33:38 +00:00
Zoltan Herpai
8ebc9e7539 sunxi: bump to 4.4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48620
2016-02-03 01:24:42 +00:00
Zoltan Herpai
a9c21dd395 sunxi: add support for Orange Pi Plus (H3)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48618
2016-02-02 22:25:05 +00:00
Felix Fietkau
afdb24e3ae ramips: add IMAGE_SIZE to DEVICE_VARS, it is used by build templates
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48611
2016-02-01 17:41:29 +00:00
Rafał Miłecki
a8c2701866 bcm53xx: fix bcma-hcd compilation in kernel 4.4
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48607
2016-02-01 12:54:17 +00:00
Rafał Miłecki
8095667532 bcm53xx: build D-Link DIR-885L image
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48606
2016-02-01 12:43:04 +00:00
Rafał Miłecki
88deb4aec1 bcm53xx: change brcmnand behavior for ECC strength 1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48605
2016-02-01 12:42:51 +00:00
Rafał Miłecki
f188b6d512 bcm53xx: fix NAND parameters on DIR-885L
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48604
2016-02-01 12:42:42 +00:00
Rafał Miłecki
701dba093f bcm53xx: add brcmnand patch reading flash parameters
It's useful for adding support for new hardware.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48603
2016-02-01 12:42:23 +00:00
Rafał Miłecki
78abece62f bcm53xx: include (build) Seama mtdsplit parser
It's needed for devices using Seama like D-Link DIR-885L.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48602
2016-02-01 12:42:07 +00:00
Rafał Miłecki
9220dd5d36 kernel: mtdsplit: support Seama entity with UBI
Some D-Link routers (e.g. DIR-885L) have NAND and use Seama format. It
means OpenWrt will want to have UBI in Sseama entity and should be able
to detect it.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48600
2016-02-01 12:41:53 +00:00
Rafał Miłecki
4156f292c1 kernel: mtdsplit: detect UBI partition when looking for rootfs
This allows mtdsplit parsers work with UBI which is very popular on
NAND flases.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48599
2016-02-01 12:41:47 +00:00
Rafał Miłecki
e1491b341b kernel: mtdsplit: modify rootfs helpers to provide partition type
Our mtdsplit parsers may want to create partition with name choice based
on partition file system (e.g. SquashFS vs. JFFS2). This patch allows
passing extra argument pointing to variable that will be set properly.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48598
2016-02-01 12:41:41 +00:00
Felix Fietkau
411515b368 ar71xx/image: use SOURCE_DATE_EPOCH for mksquashfs-lzma
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 48589
2016-01-31 23:29:41 +00:00
Felix Fietkau
5ab4db376a cns3xxx: enable CONFIG_PROC_STRIPPED to improve network performance
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48581
2016-01-31 12:35:33 +00:00
Felix Fietkau
9ab08d665f cns3xxx: improve ethernet performance by using the page fragment allocation API
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48580
2016-01-31 12:35:20 +00:00
Felix Fietkau
3d4444f257 cns3xxx: fix ethernet DMA ring allocation issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48579
2016-01-31 12:35:07 +00:00
Felix Fietkau
2067f7f1de ar71xx: use page fragment API in the ethernet driver
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48578
2016-01-31 12:29:34 +00:00
Felix Fietkau
927cec956e ixp4xx: fix initramfs builds
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48576
2016-01-31 00:54:53 +00:00
Rafał Miłecki
9a69e00baa bcm53xx: support Netgear R8500 in sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48572
2016-01-30 16:57:35 +00:00
Rafał Miłecki
12ec144892 bcm53xx: use proper CPU port in b53 for Netgear R8500
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48571
2016-01-30 16:56:50 +00:00
Rafał Miłecki
ddc8437f08 kernel: support bgmac on BCM47094
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48564
2016-01-30 13:35:31 +00:00
Felix Fietkau
2530640f07 ar71xx: add support for linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48563
2016-01-30 13:19:53 +00:00
Felix Fietkau
e5b5cce442 ar71xx: fix a few include errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48562
2016-01-30 13:19:37 +00:00
Zoltan Herpai
83b62a56db mxs: bump to 4.4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48561
2016-01-30 12:13:21 +00:00
Zoltan Herpai
e6b554bbb2 mxs: enable regulator in 4.4 config
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48560
2016-01-30 12:12:57 +00:00
Zoltan Herpai
4668d7c572 mxs: forward-port regulator patches into 4.4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48559
2016-01-30 12:05:49 +00:00
Felix Fietkau
beda11255b octeon: get rid of /lib/functions/octeon.sh hackery, use sysinfo directly
Fixes sysupgrade

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48558
2016-01-29 23:19:41 +00:00
Felix Fietkau
f32de94e0a octeon: update to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48557
2016-01-29 23:19:36 +00:00
Rafał Miłecki
926c8dfc7b bcm53xx: specify magic expected in sysupgrade for D-Link DIR-885L
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48553
2016-01-29 22:31:43 +00:00
Felix Fietkau
6fd5449198 lantiq: Make the ar9.dtsi sram node match "simple-bus"
All other SoC types are using "lantiq,sram" and "simple-bus" to ensure
that all child nodes are set up correctly during linux kernel
initialization (plat_of_setup(void) in arch/mips/lantiq/prom.c). Without
this some of sram child nodes might not be parsed.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48548
2016-01-29 00:42:50 +00:00
Felix Fietkau
022855baf2 lantiq: Move the definition of the xrx200-net node to vr9.dtsi
This removes a lot of duplicate register and interrupt definitions by
moving the xrx200-net definition to vr9.dtsi and making all devices re-
use it.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48547
2016-01-29 00:42:45 +00:00
Felix Fietkau
d4fe52c16d lantiq: fix PHY state handling issue
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48546
2016-01-29 00:42:38 +00:00
Felix Fietkau
1923d63318 malta: move to 4.4 kernel
Linux now has device tree support for malta.  The patch for correcting
/proc/iomem content is not needed now.  Previously it was

    root@(none):/# cat /proc/iomem
    00000000-00000fff : reserved
    00001000-000effff : System RAM
    000f0000-000fffff : reserved
    00100000-0fffefff : System RAM
      00100000-003f2b6b : Kernel code
      003f2b6c-00485937 : Kernel data
    ...

Now it's

    root@OpenWrt:/# cat /proc/iomem
    00000000-0fffefff : System RAM
      00100000-004a3297 : Kernel code
      004a3298-0057cfff : Kernel data
    ...

The kernel config was prepared as follows

 1. cp target/linux/malta/config-{3.18,4.4}
 2. make kernel_menuconfig CONFIG_TARGET=subtarget_platform

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 48543
2016-01-28 22:42:49 +00:00
Rafał Miłecki
c0edf30bdc bcm53xx: basic support for Seama format in sysupgrade
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48535
2016-01-28 22:38:37 +00:00
Felix Fietkau
ad3220aa8b x86: remove redundant default network config
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48530
2016-01-28 18:19:59 +00:00
Felix Fietkau
705ddc9bb9 ramips: make tp-link firmware size errors non-fatal
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48526
2016-01-28 14:13:01 +00:00
Rafał Miłecki
518ad4763a bcm53xx: fix MD5 in Seama format on flash after installing OpenWrt
We need to fix Seama just like we fix TRX due to the rootfs mark.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48522
2016-01-28 08:51:58 +00:00
Rafał Miłecki
22eb2c1bf2 bcm53xx: enable earlyprintk and all RAM on DIR-885L
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48520
2016-01-28 08:51:46 +00:00
Rafał Miłecki
6bdb024391 bcm53xx: add D-Link DIR-885L DT patch
We don't build image for this device yet.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48519
2016-01-28 07:01:23 +00:00
Rafał Miłecki
512e0fca81 bcm53xx: replace iproc regression fix with the final one
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48518
2016-01-28 07:01:17 +00:00
Rafał Miłecki
80bd8f3d09 bcm53xx: use two upstream USB bcma patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48517
2016-01-28 07:01:09 +00:00
Rafał Miłecki
e9479e62b0 kernel: backport more 4.6 bcma stuff needed for new chipsets
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48516
2016-01-28 07:00:44 +00:00
Felix Fietkau
aff2ee7e4a kernel: change the OF mtd mac address patch to prefer mtd-mac-address over other properties
Fixes MAC address on TL-WDR4900

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48512
2016-01-27 21:39:16 +00:00
Jo-Philipp Wich
54de773f2b brcm47xx: add proper switch port mapping for WRT610Nv2 / Linksys E3000v1
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48511
2016-01-27 20:47:44 +00:00
Rafał Miłecki
39f1157075 bcm53xx: switch to kernel 4.4
Initially 4.4 didn't work on bcm53xx because network was breaking few
seconds after setting interfaces. It's fixed since r48059 (switching
from 4.4-rc5 to 4.4-rc7).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48510
2016-01-27 12:44:07 +00:00
Rafał Miłecki
1dfa8f37db bcm53xx: detect Seama sysupgrade format
It's used e.g. by D-Link devices. We don't support it yet.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48509
2016-01-27 10:40:58 +00:00
Felix Fietkau
81e8e02289 ramips: fix image size checks for Buffalo WSR-1166 and WSR-600
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48508
2016-01-26 16:45:11 +00:00
Luka Perkov
401b201d04 generic: mark CONFIG_SUNXI_SRAM as not set
It is marked like this on most targets.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 48507
2016-01-26 15:27:42 +00:00
Luka Perkov
9aebe0f782 generic: 4.4: refresh patches
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>

SVN-Revision: 48506
2016-01-26 11:30:45 +00:00
Hauke Mehrtens
495badf6d1 x86: add BACKLIGHT_APPLE configuration option
This closes #21713.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48502
2016-01-25 23:29:18 +00:00
Luka Perkov
6bc24292ab kirkwood: drop 4.3 support
Signed-off-by: Luka Perkov <luka.perkov@sartura.hr>

SVN-Revision: 48499
2016-01-25 22:54:52 +00:00
Hauke Mehrtens
a29c7ca3d9 kernel: update kernel 4.3 to version 4.3.4
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48498
2016-01-25 21:44:48 +00:00
Hauke Mehrtens
4807ca67d6 kernel: update kernel 4.1 to version 4.1.16
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48497
2016-01-25 21:44:12 +00:00
Hauke Mehrtens
85e523e126 kernel: update kernel 3.18 to 3.18.26
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48496
2016-01-25 21:43:26 +00:00
Felix Fietkau
57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
2016-01-25 16:30:41 +00:00
Felix Fietkau
e8e4b6eed8 kernel: fix a small bug in the MIPS highmem fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48482
2016-01-25 10:28:29 +00:00
Felix Fietkau
68fef14e46 kernel: disable CONFIG_USERFAULTFD, it is unused
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48481
2016-01-25 10:28:19 +00:00
Rafał Miłecki
02abeb3b0a kernel: mtdsplit: document Seama splitter a bit
Rename kernel_size variable as it includes whole entity size, not just a
kernel size. Also update comments to match it and describe better what
are we checking/looking for.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48480
2016-01-25 07:18:47 +00:00
Hauke Mehrtens
1c7c997019 kernel: add some missing kernel config options
The built bots found these missing kernel configuration options.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48477
2016-01-24 18:00:53 +00:00
Jo-Philipp Wich
1865710fc8 x86/64: add missing kernel symbol
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 48476
2016-01-24 15:36:10 +00:00
Jonas Gorski
96afb90f3f generic: fix relocate build with binutils 2.25.1
The new .abiflags section was kept, pushing the appended arguments to
the wrong offset and causing it to read the section instead, making
it fail on boot.

Fix this by dropping this section as well as the other sections.

Closes #21679.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48474
2016-01-24 12:36:15 +00:00
Jonas Gorski
065a240345 brcm63xx: fix build of lzma-loader with binutils 2.25.1
Apply the same fix as ar71xx needed in r46893.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48473
2016-01-24 12:36:10 +00:00
Jonas Gorski
a9b4952be1 swconfig: simplify init code
Directly return the return value of genl_register_family_with_ops()
instead of storing it in a temporary variable, then returning it.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48472
2016-01-24 12:36:06 +00:00
Jonas Gorski
38719ecca4 swconfig: drop linux < 3.13 code paths
The oldest kernel we support is 3.18, no need to keep code paths
for older kernels.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48471
2016-01-24 12:35:59 +00:00
Felix Fietkau
6f8d647778 ramips: re-enable highmem support for MT7621 now that it's fixed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48469
2016-01-24 00:16:32 +00:00
Felix Fietkau
e756c2bb07 kernel: fix MIPS highmem breakage
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48468
2016-01-24 00:16:27 +00:00
Felix Fietkau
4b7e52125f kernel: add a fix for deadlocks on dump_stack
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48461
2016-01-23 18:02:59 +00:00
Felix Fietkau
84a7bc3d57 Revert "kernel: work around CONFIG_CPU_SW_DOMAIN_PAN breakage on ARM11 MPCore"
This reverts commit r48335

The workaround is incomplete and cannot cover all possible cases. The
only real solution to this problem is to disable this feature on
ARM11MPcore entirely.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48460
2016-01-23 18:02:55 +00:00
Felix Fietkau
6dc60d54fc Revert "ar71xx: Use full 128MB flash on Netgear WNDR4300 and WNDR3700v4"
This reverts commit r48276.
This can overwrite the caldata_backup partition, so the layout needs to
be changed in a different way.

Thanks to Arjen de Korte for spotting the issue.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48456
2016-01-22 19:50:09 +00:00
Felix Fietkau
c28fb1f4fc x86_64: Add missing symbols
Update to kernel 4.4 missed some symbols, fix that.

SVN-Revision: 48453
2016-01-22 12:02:07 +00:00
Rafał Miłecki
529d527e2c kernel: backport bcma stuff sent for 4.6
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48449
2016-01-22 09:22:37 +00:00
Felix Fietkau
57690041fa kernel: clean up redundant SLUB/SLAB related defines for 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48443
2016-01-21 16:08:19 +00:00
Felix Fietkau
c18d6739bc kernel: switch to SLUB by default in 4.4 (for improved performance)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48442
2016-01-21 16:08:15 +00:00
Felix Fietkau
c26dec971e x86: fix kernel crash on geode devices (#21667)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48428
2016-01-21 13:28:25 +00:00
Rafał Miłecki
a6ec12bb09 bcm53xx: fix iProc regression with sent patch instead of a revert
This properly fixes #21393.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48423
2016-01-21 05:59:16 +00:00
Felix Fietkau
f85594f56f kernel: fix module load issue in the dma-buf debloat patch
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48409
2016-01-20 20:09:43 +00:00
Felix Fietkau
35a17334eb oxnas: finally make board names consistent
r48337 unfortunately incorrectly changed the boardname of the stg212
into stg-212 which is not the name of the image of DTS file or
boardname using sysupgrade, which is 'stg212' and imho should stay
that way.
The changes r48337 made for pogoplug-pro and pogoplug-v3 were correct,
thus this commit only partially reverts r48337.
Also properly set default for USB LED while already at it.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48398
2016-01-20 19:11:48 +00:00
Felix Fietkau
d4ca4ae070 lantiq: Fix enabling CONFIG_MTD_UIMAGE_SPLIT
r48381 added CONFIG_MTD_SPLIT_UIMAGE_FW=Y to the lantiq kernel
configuration. That unfortunately contains a typo since the "y" has to
be lower-case. This leads to the kernel asking whether the config
symbol should be enabled and thus breaking the build.

FIXES: r48381/feab990887b4: lantiq: Enable the uImage mtd splitter
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48389
2016-01-20 08:40:44 +00:00
Rafał Miłecki
7c2356e2a0 bcm53xx: revert iProc patch adding PAXC support
It broke detecting some PCIe devices. This fixes (workarounds) #21393.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48382
2016-01-19 22:53:21 +00:00
Felix Fietkau
e3b3b7fb0a lantiq: Enable the uImage mtd splitter
Until linux 4.1 the lantiq target used CONFIG_MTD_UIMAGE_SPLIT=y. That
option however is only available until linux 4.3 - thus it was not added
to lantiq's 4.4 kernel config (in r48307). This results in broken images
for devices which are using uImages. This fixes #21652

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48381
2016-01-19 22:48:37 +00:00
Zoltan Herpai
06bcc64f1f mxs: initial 4.4 support
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48377
2016-01-19 22:05:05 +00:00
Zoltan Herpai
4e3813c79d kernel: add missing symbols for 4.4
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 48376
2016-01-19 22:03:43 +00:00
Rafał Miłecki
b9fb3d4524 bcm53xx: update iProc patches (V5 accepted in helgaas/pci.git next)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48375
2016-01-19 21:53:23 +00:00
Felix Fietkau
e62802752e kernel: fix keyring reference leak (CVE-2016-0728)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48372
2016-01-19 21:09:17 +00:00
Felix Fietkau
20ba5a01cf kernel: modularize dma shared buffer code to eliminate kernel bloat
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48371
2016-01-19 21:09:11 +00:00
Rafał Miłecki
000295f8ba bcm53xx: move iProc patches that went mainline
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48370
2016-01-19 20:59:10 +00:00
Rafał Miłecki
bba8f059d7 bcm53xx: backport iProc Kconfig fixes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48369
2016-01-19 20:58:53 +00:00
Rafał Miłecki
1dfa369c98 bcm53xx: group iProc patches into patchsets they were sent in
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 48368
2016-01-19 20:58:48 +00:00
Felix Fietkau
82939c3f52 Revert "cns3xxx: re-enable CONFIG_CPU_SW_DOMAIN_PAN"
There seem to be some remaining SMP issues with it

This reverts commit r48336

SVN-Revision: 48367
2016-01-19 16:52:17 +00:00
John Crispin
78a6a9aec3 ipq806x: Add support for Netgear D7800
Signed-off-by: Tathagata Das <tathagata@alumnux.com>

SVN-Revision: 48360
2016-01-19 10:16:36 +00:00
John Crispin
f51f92d7e9 ramips: fix serial baudrate for final version of ZBT-WG2626 board
The bootloader was updated and now uses 115200 instead of 57600 baud
for the serial console. Change this also in OpenWrt's DTS, so the rate
is consistent for bootloader and linux kernel output.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48359
2016-01-19 10:16:30 +00:00
John Crispin
9df952742d ar71xx: board.d: fix switch defaults on dLAN pro 1200+ WiFi ac
transparent for vlans as originally committed

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 48358
2016-01-19 10:16:20 +00:00
John Crispin
9d4e076966 ar71xx: fix AR8337 switch initialization on dLAN pro 1200+ WiFi ac
unswap ports 0/6 (broken by 17b8dcd63100a6b9e35199882f38bdc2be640777)

Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 48357
2016-01-19 10:16:11 +00:00
John Crispin
ed72c5f846 ar71xx: add support for Netgear WPN824N
Add support for Netgear WPN824N.
Hardware specs:
  * AR7240, 4 LAN ports, 1 WAN port
  * AR9285 WLAN
  * 32 MB RAM
  * 4 MB Flash
  * 16 LEDs (LAN, WAN and Power/Status contain two LEDs for dual color
    effect)
  * 3 Buttons (not supported)

Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>

SVN-Revision: 48356
2016-01-19 10:16:04 +00:00
John Crispin
9f7bbc649c ramips: HiLink HLK-RM04 image name typo (RM02 -> RM04)
The image name for the HiLink HLK-RM04 module has a typo and should read "RM04" rather than "RM02"

Signed-off-by: John Clark <inindev@gmail.com>

SVN-Revision: 48355
2016-01-19 10:15:44 +00:00
John Crispin
e25a467072 at91: drop v3.18
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 48354
2016-01-19 10:15:39 +00:00
John Crispin
83c246dffd at91: move to 4.4 kernel
Signed-off-by: Ben Whitten <ben.whitten@gmail.com>

SVN-Revision: 48353
2016-01-19 10:15:32 +00:00
John Crispin
0007d435ec at91: fix typo in usb kernel module makefile
Fix a typo with generating the package description

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>

SVN-Revision: 48352
2016-01-19 10:15:26 +00:00
John Crispin
7a3dacef98 at91: remove SAMA5D3 from Default image build.
As the Default profile option is a legacy subtarget, the dtb for the
sama5d3_xplained board DTS is not built and image generation fails.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>

SVN-Revision: 48351
2016-01-19 10:15:20 +00:00
John Crispin
f5454fe429 at91: add package for high speed usb device
Add a package for a missing module for the at91 high speed device.
Without this the build process pauses asking to build as module.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>

SVN-Revision: 48350
2016-01-19 10:15:14 +00:00
John Crispin
373594fb4b at91: add 4.4 support
This puts the existing patches and config in a 3.18 folder and introduces
a 4.4 config and patches.
The USB clock fix patch is no longer necessary, and the patches applying
to non DT boards has been dropped as the platform has been converted.
4.4 config was generated by copying 3.18 and running make kernel_menuconfig,
scripts/kconfig.pl filled in the gaps.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>

SVN-Revision: 48349
2016-01-19 10:15:04 +00:00
Felix Fietkau
999d8c87b2 kernel: add patch to fix the ccp-crypto module
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 48348
2016-01-19 10:06:52 +00:00
Felix Fietkau
5abaa5e5a6 kernel: add missing symbol for 4.4
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 48346
2016-01-19 10:06:34 +00:00
Felix Fietkau
10557694bb kernel: add missing symbols for 4.1
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 48342
2016-01-18 23:35:18 +00:00
Felix Fietkau
2e7b00069a oxnas: switch to Linux 4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48340
2016-01-18 23:35:05 +00:00
Felix Fietkau
89d37aaa5c oxnas: add patches and config for Linux 4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48339
2016-01-18 23:34:59 +00:00
Felix Fietkau
cee6c07cf3 oxnas: prepare platform and drivers for Linux 4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48338
2016-01-18 23:34:51 +00:00
Felix Fietkau
354e5cdbe2 oxnas: fix the incorrect board names
Signed-off-by: Shonn Lu <countrysideboy@qq.com>
Acked-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 48337
2016-01-18 23:34:42 +00:00
Felix Fietkau
10220cd7e9 cns3xxx: re-enable CONFIG_CPU_SW_DOMAIN_PAN
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48336
2016-01-18 23:20:38 +00:00
Felix Fietkau
9c7d5fb570 kernel: work around CONFIG_CPU_SW_DOMAIN_PAN breakage on ARM11 MPCore
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48335
2016-01-18 23:20:18 +00:00
Felix Fietkau
87e4f9f009 cns3xxx: update to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48334
2016-01-18 22:38:23 +00:00
Felix Fietkau
91278df70e cns3xxx: fix a ethernet driver napi poll handling bug
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48333
2016-01-18 22:38:14 +00:00
Felix Fietkau
136747c564 cns3xxx: clean up SMP related code
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48332
2016-01-18 22:38:09 +00:00
Felix Fietkau
8ecfa0e773 cns3xxx: fix adding twd local timers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48331
2016-01-18 22:38:03 +00:00
Felix Fietkau
f366dc25d3 cns3xxx: remove obsolete file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48330
2016-01-18 22:37:57 +00:00
Felix Fietkau
2ac8b1c1fe cns3xxx: remove unused define and use of a deprecated function
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48329
2016-01-18 22:37:51 +00:00
Hauke Mehrtens
13b8b8c2e7 lantiq: add support for TP-Link VR200v
This adds basic support for TP-Link VR200v.
Currently the following parts are not working: FXO, Voice, DECT, WIFI (both)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48328
2016-01-18 20:40:03 +00:00
Felix Fietkau
fcfc7eb2ae kernel: fix uninitialized variable in bridge multicast-to-unicast patch on 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48327
2016-01-18 20:16:37 +00:00
Felix Fietkau
e620f4d6f8 arc: clean-up and move CFLAGS to include/target.mk
Most of currently mentioned CFLAGS in arc770/Makefile
are not really required because:
 [1] "-Os -pipe" are set by default in include/target.mk
 [2] "-fno-caller-saves" gets enabled via menuconfig
     as an extra compiler flag for developers

So the only one that makes sense is "-matomic" and
that one is really essential. Without it many software
packges won't build complainin on unresolved atomic ops.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48326
2016-01-18 17:52:03 +00:00
Felix Fietkau
018e84f58d arc770/axs101: fix console output
While bumping kernel version kernel command line was
unintentionally modified in attempt to make it closer
to upstream version.

In case of AXS that has not only serial port but HDMI/USB
both capable of being debug console we have 2 entries in
kernel's command line:
------------------->8-----------------
console=tty0 console=ttyS3,115200n8
------------------->8-----------------

But as it turned out OpenWRT uses procd as init instead of
Busybox. And in its turn procd gets the first "console"
entry from kernel command line (/proc/cmdline) and uses it
if default inittab is used:
------------------->8-----------------
...
::askconsole:/bin/ash --login
------------------->8-----------------

So what we got is non-functional serial console.
That change removes "console=tty0" which brings serial
console back to life.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48325
2016-01-18 17:51:54 +00:00
Felix Fietkau
85ba5805e4 kernel: fix a build regression in the ld-version script fix
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48324
2016-01-18 17:40:40 +00:00
Felix Fietkau
e7846156f2 lantiq: drop linux 4.1 support
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48323
2016-01-18 15:54:23 +00:00
Felix Fietkau
9b4b2b4e17 lantiq: switch to linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48322
2016-01-18 15:54:18 +00:00
Felix Fietkau
6cec31da3c lantiq: fix VDSL device detection with Linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48319
2016-01-18 15:35:17 +00:00
Felix Fietkau
3c3fb1dfc0 ramips: delete the broken sound driver
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48318
2016-01-18 13:40:15 +00:00
Felix Fietkau
63aa7023d8 ramips: mark kmod-sound-mtk as broken, it does not compile properly
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48317
2016-01-18 13:22:38 +00:00
Felix Fietkau
fa61e3fbba ramips: fix kernel config handling for mt7620/mt7628 sound module
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48316
2016-01-18 13:22:34 +00:00
Felix Fietkau
edb3c1780c brcm2708: fix RPi model B plus support
Not sure if B+ is used or not (mine has B Plus) so leave both

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 48311
2016-01-18 12:42:03 +00:00
Felix Fietkau
a168e972fb kernel: fix MIPS linux-4.4 build on non-GNU systems
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48310
2016-01-18 11:40:49 +00:00