Commit graph

609 commits

Author SHA1 Message Date
Jonas Gorski
200359a520 bcm63xx: handle huawei nvram layout
Use a different length for calculating the nvram checksum on hauwei
boards. Fixes boot on HW553 and HW556.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35533
2013-02-10 12:31:31 +00:00
Florian Fainelli
6b0da6db6a remove support for 3.6 kernel
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35506
2013-02-05 22:36:54 +00:00
Florian Fainelli
e22926a46b make default version 3.7.6
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35505
2013-02-05 22:36:50 +00:00
Florian Fainelli
57803a98ec remove superfluous calls to /lib/brcm63xx.sh
The first preinit script 03_do_brcm63xx.sh does the right job of
exporting variables for the other subsequent preinit scripts to use
them.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35504
2013-02-05 22:25:30 +00:00
Florian Fainelli
84d306d23c remove references to the old switch driver
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35503
2013-02-05 22:25:19 +00:00
Mirko Vogt
ec19a23bae fix trx checksum after first boot and add led/button definitions for boards RTA770BW and RTA770W
SVN-Revision: 35501
2013-02-05 14:57:43 +00:00
Mirko Vogt
f460388ce2 add support for board named RTA770W
Actually this board is the very same as the rta770bw,
where the additional 'b' within the name just
indicates 'Annex B'. The ADSL Modem itself is able
to handle both, Annex A as well as Annex B -
the loaded firmware makes the only difference

SVN-Revision: 35500
2013-02-05 14:57:40 +00:00
Jonas Gorski
8506964e6d bcm63xx: add support for linux 3.8
Based on 3.8-rc6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35482
2013-02-04 10:19:55 +00:00
Jonas Gorski
3b4fced67d bcm63xx: add support for linux 3.7
Based on 3.7.6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35481
2013-02-04 10:19:50 +00:00
Jonas Gorski
a15e1a950d bcm63xx: refresh 3.6 patches
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35477
2013-02-04 10:19:24 +00:00
Jonas Gorski
ce8b226046 bcm63xx: replace kmod-switch with swconfig in default package set
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35407
2013-01-30 00:19:21 +00:00
Jonas Gorski
8411e5c06e bcm63xx: switch to b53 and swconfig
Switch to using the B53 switch driver where appropriate.

Use a non-tagged default config where it isn't confirmed to be
working.

Remove the switch configuration in preinit as the switch will now
be configured by the driver  to use port isolation to prevent leakage
between lan and wan.

While at it, also provide a switch config for Neufbox 6.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35307
2013-01-23 10:12:40 +00:00
Jonas Gorski
17d51121a6 bcm63xx: expose the internal switch to b53
Allow b53 access to the internal switch of BCM6328, BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35306
2013-01-23 10:12:37 +00:00
Jonas Gorski
3e998d9cf9 bcm63xx: move bcm63xx-spi into the kernel
The SPI driver is needed for supporting to boot from SPI flash on BCM6358
and BCM6368, and for SPI connected switches.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35304
2013-01-23 10:12:13 +00:00
Jo-Philipp Wich
3a2cccda2e all targets: use numerically prefixed uci-defaults file names to better control order of execution
SVN-Revision: 35217
2013-01-18 12:42:53 +00:00
Jonas Gorski
e952eaa112 bcm63xx: Add Huawei HG556a support
Add Huawei EchoLife HG556a support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo@openwrt.org: added some code style fixes]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35011
2013-01-04 14:47:57 +00:00
Jonas Gorski
0e58173fa5 bcm63xx: Fix caldata partition mtd patch
Allow bcm63xxpart to receive a caldata offset if calibration data is contained in flash.

Tested-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 35010
2013-01-04 14:47:50 +00:00
Jonas Gorski
10fc07daac bcm63xx: remove 3.3 support
3.6 is tested enough to be considered stable.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35009
2013-01-04 14:47:43 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh)
SVN-Revision: 34793
2012-12-19 16:07:50 +00:00
Gabor Juhos
44b9898251 kernel: update linux 3.6 to 3.6.11
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
2012-12-18 14:41:16 +00:00
Gabor Juhos
2b378d11c8 kernel: update linux 3.6 to 3.6.10
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
2012-12-11 20:14:39 +00:00
Gabor Juhos
2581173660 kernel: update linux 3.6 to 3.6.9
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
2012-12-08 15:01:33 +00:00
Florian Fainelli
d9d0814fc2 Fix Comtrend AR-5381u Power LED
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34471
2012-12-04 15:19:50 +00:00
Gabor Juhos
c2f018fca2 remove common symbols from 3.6 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c kernel: update linux 3.6 to 3.6.8
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
2012-11-29 07:42:19 +00:00
Florian Fainelli
0588d13a3e Fix typo in 96338GW power LED.
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 34396
2012-11-27 18:42:42 +00:00
Jonas Gorski
60e0e0d6e6 bcm63xx: Add a fixup for rt2x00 devices.
This patch adds support for defining rt2x00 eeprom data.
This eeprom data can be extracted from flash or loaded directly from a firmware file.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34322
2012-11-24 14:19:22 +00:00
Jonas Gorski
746b4cec06 bcm63xx: Enable LED pin support for ath9k pci fixup.
Some boards need specifying LED pin in order to get it working.
For example, in board HW556 (Huawei HG556a) "led_pin" must be "2".
By default led_pin is "0", so dsl_274xb_rev_f is changed to "-1".

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34321
2012-11-24 14:19:16 +00:00
Jonas Gorski
1baeede939 bcm63xx: fix spi transfer handling
* Accept transfers without bits_per_word set.

* Work around the inability of the hardware of keeping CS asserted.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 34320
2012-11-24 14:19:09 +00:00
Jonas Gorski
8dc72c5c4d Revert "target specific patches have nothing to do in generic.."
This reverts commit r34230, as it is causing build failures:

 make[3] -C package/mtd compile
imagetag.c:35:32: fatal error: linux/bcm963xx_tag.h: No such file or directory
compilation terminated.
make[4]: *** [imagetag.o] Error 1

Any patches modifying exported kernel headers need to reside in generic
as toolchain/kernel-headers only applies generic patches.

SVN-Revision: 34255
2012-11-19 12:38:26 +00:00
Imre Kaloz
b220071cd2 target specific patches have nothing to do in generic..
SVN-Revision: 34230
2012-11-18 09:22:38 +00:00
Gabor Juhos
ff1e854511 kernel: update linux 3.6 to 3.6.7
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
2012-11-18 08:41:31 +00:00
Jonas Gorski
306894b88f bcm63xx: switch to 3.6.6
SVN-Revision: 34160
2012-11-11 19:57:17 +00:00
Jonas Gorski
c54fa281b1 bcm63xx: fix compilation with kmod-ohci enabled with 3.6
Fixes the following error:

drivers/usb/host/ohci-bcm63xx.c: In function 'ohci_bcm63xx_start':
drivers/usb/host/ohci-bcm63xx.c:33:3: error: implicit declaration of function 'err' [-Werror=implicit-function-declaration]

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34138
2012-11-10 22:10:47 +00:00
Jonas Gorski
15519bec9c bcm63xx: add two missing usb patches to 3.6
SVN-Revision: 34137
2012-11-10 19:59:16 +00:00
Jonas Gorski
06ad6ffe16 bcm63xx: fix Ethernet DMA for 636x and 6328 for 3.6
SVN-Revision: 34136
2012-11-10 19:59:07 +00:00
Jonas Gorski
f2bb7754f5 bcm63xx: Enable endian check support for ath9k pci fixup.
Some ath9k caldatas need to be "endian checked".
This patch allows selecting wether to enable endian check or not.
Endian check is disabled by default.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 34105
2012-11-07 09:01:03 +00:00
Jonas Gorski
a50d121d8e linux: export bcm963xx_tag.h to userspace
Export bcm963xx_tag.h so mtd can use it without using kernel includes.

Signed-off-by: Catalin Patulea <cat@vv.carleton.ca>
[jonas.gorski@gmail.com: fixup bcm63xx patches, completely remove header
 from original location, refresh patches, use  a more matching patch
 number, port to 3.6]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 34103
2012-11-06 15:21:46 +00:00
Jonas Gorski
5bc7d81a20 bcm63xx: fix SPW303V images
SPW303V also needs its CRC fixed up since increasing the image size to
4MB to prevent the dual image mode of CFE.

SVN-Revision: 34091
2012-11-05 22:50:29 +00:00
Gabor Juhos
e91dc2e5b3 target: refresh all target configs with kconfig.pl
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
2012-10-29 10:11:05 +00:00
Florian Fainelli
9af90aa80c add missing 6345 clock bits patch to 3.6 patches
SVN-Revision: 33941
2012-10-26 15:24:14 +00:00
Florian Fainelli
8d69af7c9f add preliminary support for 3.6 kernel
SVN-Revision: 33936
2012-10-25 21:16:51 +00:00
Florian Fainelli
dea2da55df fix Ethernet DMA for 636x and 6328 after r33916
SVN-Revision: 33918
2012-10-25 11:54:41 +00:00
Florian Fainelli
917670922b add support for the Dynalink RTA770BW board
This board id is used by the Siemens Gigaset SE515 router.

SVN-Revision: 33917
2012-10-24 21:25:22 +00:00
Florian Fainelli
bdfcbb8bee make BCM6345 Ethernet DMA changes runtime checks
The semantics of the DMA engine are identical, we just have a couple of
special case handling.

SVN-Revision: 33916
2012-10-24 21:25:10 +00:00
Jonas Gorski
0cc4bed41c add support for Comtrend AR5381u.
Router: Comtrend AR5381u.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33895
2012-10-23 10:57:47 +00:00
Jonas Gorski
d73871fb18 add support for Comtrend AR5387un.
Router: Comtrend AR5387un.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33894
2012-10-23 10:57:44 +00:00
Jonas Gorski
e93725a743 add support for HomeStation ADB P.DG A4001N.
Router: HomeStation ADB P.DG A4001N.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix subject, indentation in patch]
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>

SVN-Revision: 33893
2012-10-23 10:57:39 +00:00
Florian Fainelli
61686a1514 add back support for BCM6345 Ethernet DMA engine
SVN-Revision: 33889
2012-10-22 12:57:22 +00:00