Commit graph

36843 commits

Author SHA1 Message Date
Rafał Miłecki
d7e41df24a bcm53xx: switch to standalone USB 2.0 PHY driver
This drops built-in support for USB 2.0 PHY and starts using separated
driver that was upstreamed & backported some time ago.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-01 16:52:08 +02:00
Rafał Miłecki
7120a43013 bcm53xx: add patch specifying USB controllers in DT
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-10-01 16:52:08 +02:00
Rafał Miłecki
d5dcb1bf97 bcm53xx: backport BCM5301X patches from 2019-09-30
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-30 23:39:28 +02:00
Matthias Schiffer
cea09329e5
netfilter: fix file conflicts between kmod-ipt- and kmod-nft- packages
The nf_reject_* and nf_nat_masquerade_* modules are moved into the
corresponding kmod-nf- packages. Appropriate dependencies are added to the
kmod-nft- packages.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-30 23:32:05 +02:00
Matthias Schiffer
c50ba61caf
kernel: fix module dependency checking
Since the kernel makefile is using .ONESHELL, we need to add -e to
.SHELLFLAGS so errors are not ignored.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-30 23:32:04 +02:00
Álvaro Fernández Rojas
7d559169c5 kernel: update to v4.4.23
Refresh patches for all targets that support kernel 4.4.
compile/run-tested on brcm2708/bcm2710 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-30 20:08:21 +02:00
Stijn Segers
949cfbb243 kernel: update kernel 4.4 to version 4.4.22
Forgot to update kernel-version.mk, so updated patch. Compile-tested on x86/64 and ar71xx; run-tested on x86/64 and ar71xx.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2016-09-30 13:34:04 +02:00
Felix Fietkau
fc88eb3fdf ath9k: remove patch causing stability issues with powersave devices (FS#176)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-30 10:50:20 +02:00
Kevin Darbyshire-Bryant
34c2726ca7 iproute2: fix no fortify build failure
Fix rt_names build failure when FORTIFY_SOURCE disabled.
Include limits.h which otherwise gets automatically included
by fortify headers.

Solves FS #194

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-09-30 10:15:28 +02:00
dissent1
eb7307cb94 ipq806x: update Netgear R7800 device tree
-add spi pins
-move mdio and rgmii pinctrl from gmac and mdio into pinmux node
-add i2c4 pinctrl into rpm node
-add pin details into several nodes
-update gmac1 and gmac2 parameters
-update mdio phy0 and phy4 registers by ddwrt devs findings
-fix i2c4 pin drive-strengh
-remove pcie pins as it's already present in ipq8065 DT

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-09-30 10:15:23 +02:00
Daniel Dickinson
71370d2c55 target/{sdk,imagebuild}: Fix for symlink-tree
With symlink tree some directories are just symlinked which
means IB and SDK end up with a symlink instead of an actual
directory; this fixes the missing files by dereferencesing
the directories instead of copying the symlinks.

Signed-off-by: Daniel Dickinson <lede@cshore.thecshore.com>
2016-09-30 00:39:25 +02:00
Álvaro Fernández Rojas
c3d3111831 brcmfmac43430-firmware: remove package and switch to linux-firmware
Now that the firmware for BCM43430 has been submitted to linux-firmware use it
and remove RPiDistro package.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-29 21:24:45 +02:00
Felix Fietkau
31e0f0aec0 kernel: do not enable the unpackaged rfkill-gpio driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-29 18:25:49 +02:00
Felix Fietkau
0b828e3249 kernel: add missing config symbols
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-29 18:07:47 +02:00
Jonas Gorski
4aa5d3e60d mvebu: add support for SFP
Add patches for SFP support and package it for ClearFog. Tested with a
Juniper SFP module.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-29 13:47:18 +02:00
Jonas Gorski
a454756c91 mvebu: disable MSI interrupts
MSI interrupts do not seem to be working on mvebu, and they break
ath10k. Since nothing else seems to be using them, especially not
mwlwifi, disable them until we can fix MSI interrupts.

Works around the following issue:
[    9.001457] ath10k_pci 0000:02:00.0: failed to receive control response completion, polling..
[   10.001453] ath10k_pci 0000:02:00.0: Service connect timeout
[   10.007126] ath10k_pci 0000:02:00.0: failed to connect htt (-110)
[   10.092224] ath10k_pci 0000:02:00.0: could not init core (-110)
[   10.098177] ath10k_pci 0000:02:00.0: could not probe fw (-110)

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Acked-by: Felix Fietkau <nbd@nbd.name>
2016-09-29 13:47:18 +02:00
Felix Fietkau
685ed1e072 kernel: add STAGING_DIR_HOST/lib to host library search path
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-29 13:35:11 +02:00
John Crispin
72e9d19f6e mac80211: fix rfkill dependency
Signed-off-by: John Crispin <john@phrozen.org>
2016-09-29 11:39:41 +02:00
Cezary Jackiewicz
e79e555c0e ramips: Xiaomi MiWiFi Nano: fix status led
- add status led for Xiaomi MiWiFi Nano
- revert af1e70b4a7 , this should not be added.

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-09-29 11:39:41 +02:00
Felix Fietkau
2b3b63aea3 kernel: fix build error in sign-file.c with libressl
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-29 11:23:27 +02:00
Felix Fietkau
9f6d8532c7 kernel: add missing config symbols
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-29 11:13:31 +02:00
Álvaro Fernández Rojas
c795794eef mac80211: use upstream patches for rtl8xxxu
Also improves rtl8188eu support.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-29 10:32:41 +02:00
Felix Fietkau
71144844e1 kernel: add missing config symbols
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-28 16:59:34 +02:00
John Crispin
97c38e7f22 procd: update to latest git HEAD
this adds 2 new inittab handlers
* askconsolelate
* respawnlate

Signed-off-by: John Crispin <john@phrozen.org>
2016-09-28 12:07:47 +02:00
Felix Fietkau
76af0eff3f netifd: update to the latest version, adds various fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-28 09:56:32 +02:00
Florian Fainelli
c8e68150bf toolchain: Rework external toolchain libc selection
Make it a choice menu which offers the 3 C libraries we know about: glibc,
uClibc and musl. While at it, make it possible for the external toolchain libc
to select USE_GLIBC, USE_UCLIBC or USE_MUSL which is used by several packages
to conditionally include specific CFLAGS (e.g: iproute2).

Because USE_GLIBC et al. can now be selected by external toolchains, we need to
restrict the per-libc menus to check on !EXTERNAL_TOOLCHAIN.

While at it, make musl the default C library for external toolchain to match
the internal toolchain.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-28 08:39:01 +02:00
Stijn Segers
fb586939cc ath10k-firmware: move to firmware section in buildroot
This patch moves the ath10k firmware packages to the firmware submenu
in the buildroot, where it belongs.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2016-09-28 08:39:01 +02:00
Martin Blumenstingl
e7be0decf6 ar71xx: Do not use a hardcoded ath10k firmware mac address
ar71xx has an init-script for special devices where the ath10k OTP
calibration data is stored on the PCIe card's EEPROM (and thus can only
be read by ath10k). Unfortunately the OTP data uses the default mac
address (= all devices come with the same mac address, which leads to
problems when you have multiple of these devices in the same network).

To work around this the mac address is patched in the firmware during
the first boot of the device. To prevent flash wear this was only done
if the ath10k firmware matched a hardcoded md5sum.
However, if the md5sum does not match this can mean that either the mac
address was already patched (which is fine) - unfortunately it can also
mean that the firmware version was updated without updating the
hardcoded md5sum.

Change the "was the mac address already patched" check to actually
compare the mac address inside the ath10k firmware.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-09-28 08:39:01 +02:00
Martin Blumenstingl
3fbd235fb5 ath10k-firmware: update the qca988x firmware to 10.2.4.70.54
Use firmware version 10.2.4.70.54 from kvalo's git repository. The old
version (even though it's version number is greater) is an old version
from September 2015.
Using only the firmware versions from kvalo's git repo is recommended,
because those are tested by QCA's internal QCA.

The QCA988X directory received a small reorganization as a "hw2.0"
subdirectory was added - this patch also takes care of that as
board.bin was moved to that subdirectory.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-09-28 08:39:01 +02:00
Florian Fainelli
493b0f3f57 toolchain: Force installation into /lib
For 64-bit capable systems, a symbolic link is set up for /lib64 to point to
/lib, so make sure the installation goes into /lib, irrespective of where the C
library files come from in an external toolchain.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-09-28 08:39:00 +02:00
Felix Fietkau
96b59dc383 kernel: add missing config symbol after rfkill change
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-28 08:37:44 +02:00
John Crispin
986ec56507 rfkill: add fake rfkill support
allow building of modules depending on RFKILL even if RFKILL is not enabled.

Signed-off-by: John Crispin <john@phrozen.org>
2016-09-27 20:27:26 +02:00
Matthias Schiffer
376944c0ab
perf: fix build with musl on PowerPC
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-28 06:26:35 +02:00
Matthias Schiffer
82aa061251
kernel: remove echainiv.ko from kmod-crypto-iv
There is a separate package kmod-crypto-echainiv for echainiv.ko. Selecting
both packages led to a conflict, so remove the file from kmod-crypto-iv.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-09-28 02:39:18 +02:00
Rafał Miłecki
a0ce6982d8 mac80211: backport brcmfmac changes from 2016-09-27
This fixes bug that could cause WARNING on every add_key/del_key call.
It also replaces WARNING with a simple message. They may still occur
e.g. on station going out of range and A-MPDU stall in the firmware.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-09-27 18:23:53 +02:00
Chris Blake
68d649f5cd ar71xx: add support for Cisco Meraki Z1 Cloud Managed Teleworker Gateway
This patch adds support for Cisco's Z1.
Detailed instructions for the flashing the device can
be found in the OpenWrt wiki:
<https://wiki.openwrt.org/toh/meraki/z1>

Signed-off-by: Chris Blake <chrisrblake93@gmail.com>
2016-09-27 17:50:22 +02:00
Magnus Kroken
b1f39d3d7e openssl: update to 1.0.2j
A bug fix which included a CRL sanity check was added to OpenSSL 1.1.0
but was omitted from OpenSSL 1.0.2i. As a result any attempt to use
CRLs in OpenSSL 1.0.2i will crash with a null pointer exception.

Patches applied upstream:
* 301-fix_no_nextprotoneg_build.patch
* 302-Fix_typo_introduced_by_a03f81f4.patch

Security advisory: https://www.openssl.org/news/secadv/20160926.txt

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2016-09-27 17:50:22 +02:00
BangLang Huang
142ec7ada9 ramips : add support for Newifi D1
Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2016-09-27 17:50:22 +02:00
BangLang Huang
9fe833e1d0 ramips : add support for PandoraBox D1
Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2016-09-27 17:50:22 +02:00
Kevin Darbyshire-Bryant
1bc68e1379 fortify-headers: update to 0.8
Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-09-27 17:50:22 +02:00
diizzyy
0d4f02dfd6 linux-firmware: Add mirrors
Adds Google's mirrors as primary source and kernel.org as fallback.
Discussed in #lede-dev on Freenode

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-09-27 17:50:22 +02:00
Rosen Penev
c0b15b3072 openssl: Make DTLS configurable.
Signed-off by: Rosen Penev <rosenp@gmail.com>
2016-09-27 17:50:22 +02:00
Rosen Penev
aaa067ab0b openssl: Remove J-PAKE. Nothing uses it.
Signed-off by: Rosen Penev <rosenp@gmail.com>
2016-09-27 17:50:22 +02:00
Kevin Darbyshire-Bryant
78ae7d8efd busybox: v1.25.0 upstream patches
Include upstream patches for gzip, ip & ntpd.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-09-27 17:50:22 +02:00
Daniel Engberg
edbc8fec8a libjson-c: Update to 0.12.1
Updates libjson-c and removes backport patch.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-09-27 17:50:21 +02:00
diizzyy
509708889c libunwind: use url alias
Use alias instead of hardcoded URL

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-09-27 17:50:21 +02:00
Adrian Panella
dd1b69a058 uml: set inittab for working console
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-09-27 17:50:21 +02:00
Cezary Jackiewicz
66aae9a271 ramips: Add support for ZBT-CPE102
- CPU: MT7620N 580MHz
- Flash: 8MB
- RAM: 64MB
- build-in minipcie slot for modem 3G/4G
- one ethernet port 10/100Mbps

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-09-27 17:50:21 +02:00
Jo-Philipp Wich
875cddd94c iwinfo: fix WPA cipher reporting
Within the Lua binding, use the same logic as the command line interface for
reporting the used WPA ciphers. Instead of printing the intersection of
pairwise and group ciphers, report both group and pairwise ciphers.

This fixes a case where a connection which uses CCMP for pairwise and TKIP
as groupwise cipher is getting reported as using the NONE cipher.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-09-27 16:23:48 +02:00
Jo-Philipp Wich
8badcba229 iproute: properly support high routing table IDs
The Linux kernel uses two distinct fields to denote the routing table ID in
use by network routes; the 8 bit `rtm_table` member of `struct rtmsg` and the
32 bit `RTA_TABLE` netlink attribute.

If a routing table ID is larger than 255, the `RT_TABLE` attribute must be used
and the `rtm_table` field has to be set to the special `RT_TABLE_UNSPEC` value.

This commit adds a patch which...
 - switches the *_n2a() and *_a2n() functions of rt_names.c to use dynamically
   sized, name-sorted arrays instead of fixed arrays limited to 1024 slots in
   order to support IDs up to 65535
 - adds proper handling of high table IDs to iprule.c and iproute.c when
   adding, removing and dumping ip rules and network routes

After this change, the Busybox ip applet fully supports IP rules with high ID
numbers, using the same logic as the full iproute2.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-09-27 16:23:06 +02:00