No description
Find a file
Martin Blumenstingl e7be0decf6 ar71xx: Do not use a hardcoded ath10k firmware mac address
ar71xx has an init-script for special devices where the ath10k OTP
calibration data is stored on the PCIe card's EEPROM (and thus can only
be read by ath10k). Unfortunately the OTP data uses the default mac
address (= all devices come with the same mac address, which leads to
problems when you have multiple of these devices in the same network).

To work around this the mac address is patched in the firmware during
the first boot of the device. To prevent flash wear this was only done
if the ath10k firmware matched a hardcoded md5sum.
However, if the md5sum does not match this can mean that either the mac
address was already patched (which is fine) - unfortunately it can also
mean that the firmware version was updated without updating the
hardcoded md5sum.

Change the "was the mac address already patched" check to actually
compare the mac address inside the ath10k firmware.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-09-28 08:39:01 +02:00
.github Add Issue submission template (redirect to bugs.lede-project.org) 2016-09-01 09:01:04 -04:00
config config: enable shadow passwords unconditionally 2016-09-26 17:57:56 +02:00
docs build: Prevent more gzip timestamps 2015-07-14 09:57:45 +00:00
include rootfs: fail on errors in postinst scripts 2016-09-26 17:57:58 +02:00
package ath10k-firmware: update the qca988x firmware to 10.2.4.70.54 2016-09-28 08:39:01 +02:00
scripts image: allow specifying additional packages for device-specific rootfs 2016-09-24 18:25:25 +02:00
target ar71xx: Do not use a hardcoded ath10k firmware mac address 2016-09-28 08:39:01 +02:00
toolchain fortify-headers: update to 0.8 2016-09-27 17:50:22 +02:00
tools ptgen: work around gcc miscompilation 2016-09-26 12:23:41 +02:00
.gitattributes add .gitattributes to prevent the git autocrlf option from messing with CRLF/LF in files 2012-05-08 13:30:49 +00:00
.gitignore build: add integration for managing opkg package feed keys 2015-04-06 19:39:51 +00:00
BSDmakefile add missing copyright header 2007-02-26 01:05:09 +00:00
Config.in branding: add LEDE branding 2016-03-24 22:40:13 +01:00
feeds.conf.default feeds: switch from github to lede-project.org mirrors 2016-08-01 22:34:18 +02:00
LICENSE
Makefile build: move merged package directory from bin/ to staging_dir 2016-08-03 12:22:18 +02:00
README README: Update project README 2016-05-12 03:29:36 +02:00
rules.mk build: add checksum target 2016-08-01 18:11:21 +02:00

This is the buildsystem for the LEDE Linux distribution.

Please use "make menuconfig" to choose your preferred
configuration for the toolchain and firmware.

You need to have installed gcc, binutils, bzip2, flex, python, perl, make,
find, grep, diff, unzip, gawk, getopt, subversion, libz-dev and libc headers.

Run "./scripts/feeds update -a" to get all the latest package definitions
defined in feeds.conf / feeds.conf.default respectively
and "./scripts/feeds install -a" to install symlinks of all of them into
package/feeds/.

Use "make menuconfig" to configure your image.

Simply running "make" will build your firmware.
It will download all sources, build the cross-compile toolchain, 
the kernel and all choosen applications.

To build your own firmware you need to have access to a Linux, BSD or MacOSX system
(case-sensitive filesystem required). Cygwin will not be supported because of
the lack of case sensitiveness in the file system.


Sunshine!
	Your LEDE Community
	http://www.lede-project.org