Commit graph

3025 commits

Author SHA1 Message Date
Felix Fietkau
63b525dd6b image: add a helper variable for getting kernel/rootfs from within image Build/* templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:25 +02:00
Jo-Philipp Wich
db49dd894e build: rename sysupgrade-nand to sysupgrade-tar
Now that the "sysupgrade-nand" step is used by non-NAND targets as well,
rename it to "sysupgrade-tar" to make it more generic.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-29 16:53:03 +02:00
Matthias Schiffer
adbbfb7ff9
ar71xx: don't use D-Link DIR-505 status LED as ethernet indicator
The stock firmware uses the single LED as status indicator only. Using the
same LED both for status and as ethernet indicator is uncommon, and has
been confusing users who were using the device as a WLAN mesh node (so the
LED was just off, as no ethernet was connected).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-07-28 15:59:04 +02:00
Matthias Schiffer
500a67a167
ar71xx: add revision detection for D-Link DIR-505 A1/A2
The A1 image also works on the A2, correctly set AR71XX_MODEL in this case.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-07-28 15:44:52 +02:00
John Crispin
96fa9aa13b ar71xx: add a missing ;; to ar71xx.sh
commit 42305ae24a ("ar71xx: add support for gl-mifi")

was missing a ;; breaking boot up

Signed-off-by: John Crispin <john@phrozen.org>
2016-07-24 11:17:34 +02:00
Zhao Gang
42305ae24a ar71xx: add support for gl-mifi
This add initial support for gl-mifi.
Product page: http://www.gl-inet.com/mifi/

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
2016-07-24 06:38:30 +02:00
Matthias Schiffer
9687341808
ar71xx: clean up legacy-devices.mk
Several legacy images were not buildable because of missing profile
definitions in legacy-devices.mk since MultiProfile was removed. Update
legacy-devices.mk to provide all necessary profiles, and change ordering
to match legacy.mk.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-07-27 17:27:19 +02:00
Felix Fietkau
f1e085adfe ar71xx: add ath10k firmware to profile defaults where ath10k is used
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-22 16:06:39 +02:00
Felix Fietkau
c6c81351b7 ar71xx: add missing profile for the nand subtarget (FS#56)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:58:47 +02:00
Felix Fietkau
16209710d9 ar71xx: fix WNDR4300v1 / WNDR3700v4 build (FS#56)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:52:12 +02:00
Felix Fietkau
ad323881df ar71xx: fix more image build code whitespace/tab issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:49:01 +02:00
Felix Fietkau
3d8c8d5e05 ar71xx: fix tab vs whitespace issue in image building code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:29:04 +02:00
Felix Fietkau
4d0f4f5e52 ar71xx: remove obsolete MultiProfile template code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 13:29:04 +02:00
Jo-Philipp Wich
e633a1b48f ar71xx: fix default network config of WZR-HP-G300NH and CR3000
The network defaults for the WZR-HP-G300NH and CR3000 models wrongly set the
lan interface to a vlan tagged device while the switch was set up in untagged
mode, leading to broken lan side ethernet connectivity by default.

Fix the issue by emitting untagged interfaces, consistent with the switch
setting on the device.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-20 00:21:48 +02:00
Zhao Gang
d963ddf042 ar71xx: add support for gl-ar300m
This add initial support for gl-ar300m router.
Product page: http://www.gl-inet.com/ar300m/

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
2016-07-20 00:21:48 +02:00
Stephen Walker
900da27c91 ar71xx: add software transmit timestamp support
Add software transmit timestamp and ethtool (-T) timestamp support

Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
2016-07-15 14:19:32 +02:00
Felix Fietkau
a176168a85 ar71xx: define wmac reset function for QCA955x
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-15 14:19:06 +02:00
Piotr Dymacz
d2c9b169b3 ar71xx: add support for jjPlus JWAP230
jjPlus JWAP230 is based on Qualcomm Atheros QCA9558 + QCA8337.
Short specification:

- 720/600/200 MHz (CPU/DDR/AHB)
- 2x 10/100/1000 Mbps Ethernet
- 128 MB of RAM (DDR2)
- 16 MB of FLASH
- 3T3R 2.4 GHz with external PA (SST12LP15A), up to 28 dBm
- 3x MMCX connectors
- power input: 802.3at PoE or wide range DC (36-57 V)
- optional 802.3af PSE
- 1x mini-PCIe connector with PCIe, USB buses and SIM slot
- 1x mini-PCIe connector with PCIe bus
- 1x USB type-A connector
- 6x LED, 1x button (hardware reset)
- RS232 (MAX3223) and (E)JTAG headers

Default configuration:

- WAN on eth1 (RJ45 near LEDs with PoE input)
- LAN on eth0 (RJ45 near DC jack)
- left top LED set to be status LED
- all LEDs configurable form user space

Flash instruction (do it under U-Boot, using RS232):

1. tftp 0x80060000 lede-ar71xx-generic-jwap230-squashfs-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
Piotr Dymacz
e767980eb8 ar71xx: add support for Wallys DR531
Wallys DR531 is based on Qualcomm Atheros QCA9531 v2.
Short specification:

- 550/400/200 MHz (CPU/DDR/AHB)
- 2x 10/100 Mbps Ethernet
- 64 MB of RAM (DDR2)
- 8 MB of FLASH
- 2T2R 2.4 GHz with external PA (SE2576L), up to 30 dBm
- 2x MMCX connectors
- mini-PCIe connector with PCIe/USB buses and SIM slot
- 7x LED, 1x button, 1x optional buzzer
- UART, (E)JTAG and LED headers

Default configuration:

- WAN on eth1 (RJ45 near DC jack)
- LAN on eth0 (RJ45 near button)
- S4 LED set to be status LED
- all LEDs configurable form user space
- button configured for reset

Flash instruction (do it under U-Boot, using UART):

1. tftp 0x80060000 lede-ar71xx-generic-dr531-squashfs-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9f050000"
5. saveenv && reset

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
Felix Fietkau
70cf8c3048 ar71xx: fix build error when initramfs is disabled
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-13 18:41:25 +02:00
Felix Fietkau
d6b3b44d97 ar71xx: fix a legacy image porting issue
Get rid of remaining IMAGE_PROFILE references and move template calls
the right place

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-13 13:59:24 +02:00
Daniel Dickinson
a775c5db46 ar71xx: Fix PowerCloud CAP324 No Cloud title
CAP324 nocloud was missing (No-Cloud) in description

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
2016-07-11 14:19:47 +02:00
Yousong Zhou
09907170dd ar71xx: base-files: remove the now unneeded 09_fix-seama-header
It was intended as a workaround when jffs2 eof mark was included in the
checksum calculation in seama header.  When qihoo-c301 support was
introduced the board name was not inserted into the case list (because I
was not aware of it's existence), but the issue was fixed by excluding
the jffs2 marker as part of the checksum data

Now we are at it, drop it.

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-07-11 13:26:36 +02:00
Yousong Zhou
8d0ec3e672 ar71xx: image: fix typo in MTDPARTS def for qihoo-c301
Reported-by: Syrone Wong <wong.syrone@gmail.com>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-07-11 13:26:35 +02:00
Yousong Zhou
6d6db4ff7b ar71xx: image: seama: fix making factory and sysupgrade image
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-07-11 13:26:34 +02:00
Sergey Sergeev
17ee6bb8f3 tools: add kernel2minor utility for Mikrotik devices
This patch adds support of Mikrotik yaffs2 filesystem image for kernel file
and tools/kernel2minor package.
We neede this to boot kernel through RouterBoot on new Mikrotik NOR flash devices.

Signed-off-by: Sergey Sergeev <adron@yapic.net>
2016-07-05 22:59:14 +02:00
John Crispin
8fe69e4d42 ar71xx: fix nand device profile
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 22:59:14 +02:00
Sergey Sergeev
c312cef223 ar71xx: spi-rb4xx fix.
In new kernels we should use clk_prepare_enable instead of clk_enable
since clk_enable does not make proper initialization that leads
to rise WARN_ON messages and not working spi bus on the device.

Signed-off-by: Sergey Sergeev <adron@yapic.net>
2016-07-02 10:16:17 +02:00
Felix Fietkau
f9e7ffe73b ar71xx: prevent spurious ethernet resets from dma hang check false positives
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 10:30:58 +02:00
Yousong Zhou
559a7d1177 ar71xx: seama: fix making factory images
rootfs part needs to be aligned to erase block size which is passed as
the 6th argument to Image/Build/Seama  and is now 65536 since commit
commit 5119ee9 "ar71xx: fix bogus hardcoded kernel image size for Seama
images (fixes #20585)", but $(($(6) - 64)) still assumes that the
argument is a limit on kernel partition size, i.e. 1310720, so the
generated factory image is wrong in that the kernel will fail to find
the rootfs (FlySpray link at [1])

This patch will workaround it with the following steps

1. Calculate the required space for seama header and META data in step 5
2. Pre-padding 64 bytes to lzma-compressed loader
3. Generate correctly padded image-$(2).tmp
4. Strip out the padding
5. Seal it with seama utility

While at it convert seama to new build method

[1] FS#35 - mynet-n750 factory images don't find root partition,
    https://bugs.lede-project.org/index.php?do=details&task_id=35

Reported-by: Steven Haigh <netwiz@crc.id.au>
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-06-30 22:48:39 +02:00
Yousong Zhou
ea284d704b ar71xx: image: unify indentation with 2 whitespaces
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-06-30 22:48:39 +02:00
Yousong Zhou
e3cf2cc1c6 ar71xx: image: remove duplicate IMAGES definition
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-06-30 22:48:39 +02:00
Yousong Zhou
11cbe29833 ar71xx: hiwifi-hc6361: move packages selection to generic.mk
Remove kmod-crypto-deflate and kmod-ledtrig-gpio as the device works the
same by default without them

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-06-30 22:48:39 +02:00
Jo-Philipp Wich
6ee66ae075 ar71xx: further legacy image build fixes
- Add missing macro to trigger the generation of 64k padded squashfs images
- Revert Zcomax image generation to use the prepared 64k squashfs image

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-27 15:15:49 +02:00
Felix Fietkau
be08fdd007 ar71xx: disable pdata->use_flow_control for QCA9558
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-27 12:12:40 +02:00
Felix Fietkau
75b2105cd3 ar71xx: rename ethernet pdata->builtin_switch to use_flow_control
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-27 12:12:40 +02:00
Jo-Philipp Wich
8d1218ca73 ar71xx: merge profiles into image building code
- Remove old style device profiles and convert them to device definitions
  within the image building code

- Fix the legacy build macros for the changed eval depth in the legacy
  image build wrapper

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-27 11:10:15 +02:00
Hauke Mehrtens
84d489f64f kernel: update to version 4.4.14
Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14

Some manual changes to target/linux/generic/patches-4.4/610-
netfilter_match_bypass_default_checks.patch were needed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-26 18:20:37 +02:00
Felix Fietkau
3bf3512673 Revert "ar71xx: prevent spurious ethernet resets from dma hang check false positives"
This reverts commit 3d58d7f053.
2016-06-26 16:53:11 +02:00
Felix Fietkau
3d58d7f053 ar71xx: prevent spurious ethernet resets from dma hang check false positives
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-26 11:21:17 +02:00
Felix Fietkau
26b8db2537 ar71xx: enable flow control for ethernet MACs with built-in switch
Should fix LAN speed issues on some devices. This is an updated version
of the previously reverted commit with the same name.
It improves the check for MACs connected to a built-in switch

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-26 11:21:17 +02:00
John Crispin
3874773503 Revert "ar71xx: fix legacy image building"
This reverts commit 59e98b27c9.

and

Revert "ar71xx: merge profiles into image building code"

This reverts commit 636089ead6.

these are still causing issues

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-23 19:33:31 +02:00
Jo-Philipp Wich
59e98b27c9 ar71xx: fix legacy image building
After the conversion from legacy device profiles to the newer profile
information embedded in the image building code, the legacy recipes got
triggered twice with different eval depths, leading to shell syntax errors
when processing certain images.

The double processing was caused by the remaining Image/Build macro in
legacy.mk which serves as main entry point for the new style image build code
in conjunction with the newly introduced LegacyDevice/* macros which caused
the legacy image build fallback code to kick in.

In order to fix the issue, rework all legacy macros to work under the legacy
image build wrapper and remove the Image/Build macro of legacy.mk to prevent
legacy profiles getting executed in the context of the new build code.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-24 13:43:40 +02:00
John Crispin
636089ead6 ar71xx: merge profiles into image building code
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-22 19:32:06 +02:00
Yousong Zhou
b67066b8fa ar71xx: hiwifi-hc6361: lift size limit on kernel and rootfs parts
The patch has been run-tested and the relevant dmsg logs are as the
following

    [    0.762447] Creating 5 MTD partitions on "spi0.0":
    [    0.767217] 0x000000000000-0x000000010000 : "u-boot"
    [    0.775139] 0x000000010000-0x000000020000 : "bdinfo"
    [    0.781014] 0x000000020000-0x000000fe0000 : "firmware"
    [    0.810558] 2 uimage-fw partitions found on MTD device firmware
    [    0.815043] 0x000000020000-0x000000170000 : "kernel"
    [    0.821925] 0x000000170000-0x000000fe0000 : "rootfs"
    [    0.827587] mtd: device 4 (rootfs) set to be root filesystem
    [    0.831937] 1 squashfs-split partitions found on MTD device rootfs
    [    0.837983] 0x0000005c0000-0x000000fe0000 : "rootfs_data"
    [    0.845621] 0x000000fe0000-0x000000ff0000 : "backup"
    [    0.851445] 0x000000ff0000-0x000001000000 : "art"

While at it, convert to new build method

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-06-22 19:32:06 +02:00
David Pinilla Caparrós
bbbe9932e3 ar71xx: WDR4300: Fixed default VLAN order
Reordered the VLANs so the LAN ports are set to VLAN 1 and the WAN port is set to VLAN 2, as in the other routers in the config file. Moreover, this model had this VLAN mapping in OpenWRT Chaos Calmer. It seems that the VLAN were switched when fixing a bug in the port mapping ( OpenWRT changeset 47799 )

Signed-off-by: David Pinilla Caparrós <dpinitux@gmail.com>
2016-06-17 04:13:07 +02:00
Alexander Couzens
c2e0c41842 Revert "ar71xx/cpe510: use second wifi calibration table"
Using the high power table can damage the device in some cases.

This reverts commit bf27ac019c.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-16 21:11:24 -07:00
Felix Fietkau
7c02ecdd35 Revert "ar71xx: enable flow control for ethernet MACs with built-in switch"
This reverts commit 1beb5bec64.

It was found to cause the WAN port to fail on some AR934x devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-14 10:45:10 +02:00
Arne Zachlod
f869ffdd62 ar71xx: mach-ubnt-xm.c convert patches to mach file
Signed-off-by: Arne Zachlod <arne@nerdkeller.org>
2016-06-13 22:51:43 +02:00
Felix Fietkau
1beb5bec64 ar71xx: enable flow control for ethernet MACs with built-in switch
Should fix LAN speed issues on some devices

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-13 17:58:07 +02:00