Commit graph

25832 commits

Author SHA1 Message Date
Luka Perkov
d15107fe23 Config.in: drop TARGET_UBIFS_SQUASH_UIDS, it's used by default now
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38800
2013-11-14 01:35:22 +00:00
Luka Perkov
b4ecda7b3f image: don't force ubifs journal size
Small journal size can lead to problems if nand flash is too big. By default
ubifs will use ~12% of volume size or a maximum of 8MiB.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38799
2013-11-14 01:35:21 +00:00
Hauke Mehrtens
c43d2285e0 mac80211: update regdb.txt
This was copied from wireless-regdb.git commit a14052b85e5d70e37a31962a9c56c0cdbb9acafc

The passive-scan/no-ibss flag of channels 36-48 in the world regd were
removed like it was done in r32126.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38797
2013-11-13 22:36:12 +00:00
Hauke Mehrtens
a3752801df bcm53xx: this ARM SoC does not have a FPU, use soft float.
model name      : ARMv7 Processor rev 0 (v7l)
Features        : swp half thumb fastmult edsp tls

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38796
2013-11-13 22:26:08 +00:00
Hauke Mehrtens
0ade818cb7 zram-swap: fix dependencies
swapon/swapoff are no longer provided by swap-utils; they are provided
by block-mount instead.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38795
2013-11-13 18:42:45 +00:00
Hauke Mehrtens
4abd860ab2 brcm47xx: swap also early boot console if necessary.
Some devices are using tty1 as the default console, also swap the early
boot console in such case. This is needed for the WGT634U.

Thank you Russell for reporting this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38794
2013-11-13 18:38:18 +00:00
Hauke Mehrtens
0cdab0237d kernel: b53: fix untagged shift for BCM5365
The BCM5365 needs a shift of 7 bits and not 6 bits like the BCM5325 for
the untagged ports.

Thank you Russell for reporting this and testing the patch.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 38793
2013-11-13 18:04:39 +00:00
Imre Kaloz
736db5f17c upgrade linux-firmware git revision, bump package version
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38792
2013-11-13 14:47:31 +00:00
Imre Kaloz
f5d8735c55 add another symbol for TI chipsets
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 38791
2013-11-13 14:46:21 +00:00
John Crispin
a8163bfd16 procd: remove obselete script install reference Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38790
2013-11-13 12:15:06 +00:00
John Crispin
a9cfb4b827 procd: fixup 2 wrong option types
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38789
2013-11-13 11:07:24 +00:00
John Crispin
50db95e2f0 procd: options with default values are not parsed properly in the ubus register code
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38788
2013-11-13 10:57:16 +00:00
John Crispin
1f93857092 procd: convert services to the new validation api
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38787
2013-11-13 10:49:41 +00:00
John Crispin
130d7de07f procd: update to latest git head
this includes the first wip version of the uci validation backend

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38786
2013-11-13 10:49:25 +00:00
Zoltan Herpai
5fa0e4fac0 uboot-sunxi: add U-boot builds for a couple sunxi boards
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38785
2013-11-13 10:49:22 +00:00
Felix Fietkau
682e134b02 ramips: select kmod-rt2800-soc by default (if available)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38784
2013-11-13 10:29:10 +00:00
Felix Fietkau
5f1c42d8b6 mac80211: update to wireless-testing 2013-11-05
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38783
2013-11-12 22:11:33 +00:00
Felix Fietkau
37756a97a0 hostapd: remove #ifdef MULTICALL around ap+sta support code (to support separately installed supplicant+hostapd)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38782
2013-11-12 22:11:14 +00:00
Zoltan Herpai
65f747a42d mxs: - update uboot-mxs to 3.10 - enable building uboot for imx23 along sbImage by default - (doc updated)
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38781
2013-11-12 14:39:32 +00:00
Zoltan Herpai
036f4ed4db mxs: bump kernel to 3.12 - remove DCP patch as it's in mainline now (dts patch will stay) - refresh Duckbill patch - update kmod-usb-chipidea
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38780
2013-11-12 12:48:10 +00:00
Jo-Philipp Wich
7ad5350dfb Add patch to fix ipset timeout setting problem
Fixes #14325

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>

SVN-Revision: 38779
2013-11-12 11:01:11 +00:00
Jo-Philipp Wich
c9bc0e12a9 Update ipset to version 6.20.1
Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>

SVN-Revision: 38778
2013-11-12 11:00:49 +00:00
Zoltan Herpai
f1fddbc36b mxs: add basic board runtime detection support
Signed-off-by: Michael Heimpold <mhei@heimpold.de>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38777
2013-11-12 10:19:26 +00:00
Zoltan Herpai
dcd8a08be1 uboot-envtools: add support for mxs target
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 38776
2013-11-12 10:07:03 +00:00
Zoltan Herpai
eb144d3056 mxs: duckbill: adjust leds to final hardware
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 38775
2013-11-12 09:38:14 +00:00
Zoltan Herpai
b0b78d541d mxs: rename uboot-imx23 to uboot-mxs
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38774
2013-11-12 01:34:30 +00:00
Zoltan Herpai
334bee8ad9 mxs: fix loadaddr for uImages
Signed-off-by: Harald Geyer <harald@ccbib.org>

SVN-Revision: 38773
2013-11-12 01:25:53 +00:00
Zoltan Herpai
ff41e07aa2 kernel: add new core sound module snd-pcm-dmaengine.ko for 3.12 kernels and above
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38772
2013-11-12 01:09:15 +00:00
Luka Perkov
1df0179b28 base-files: don't enter failsafe if triggered by switch
Fixes failsafe issues with switches after r38725.

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 38770
2013-11-11 23:34:11 +00:00
Hauke Mehrtens
32cbc948a1 brcm47xx: fix netconfig for inverted vlan?ports in nvram
This was observed on the Belkin Share F7D7302.

SVN-Revision: 38769
2013-11-11 23:04:47 +00:00
Hauke Mehrtens
09fd5cbd4c broadcom-diag: add Belkin F7D3302/F7D7302
Signed-off-by: Cody P Schafer <devel@codyps.com>

SVN-Revision: 38768
2013-11-11 23:04:23 +00:00
Hauke Mehrtens
e8d0b52496 linux/brcm47xx : Belkin F7Dx30x board detection
boardnum is unstable, so allow using NULL to make it unchecked.

A method for differentiating F7D3301 from F7D3302 using nvram is
unknown at this point. Reading the first 32bits of magic from the
"linux" mtd partition would do the trick, but these 2 are similar
enough that we don't need separate led/button definitions. Not knowing
which one you have is only a usability issue for upgrading the device:
they expect different magic numbers for their trx images.

Signed-off-by: Cody P Schafer <devel@codyps.com>

SVN-Revision: 38767
2013-11-11 23:04:00 +00:00
Hauke Mehrtens
0d82bbb1fb base-files: don't kill nas for sysupgrade
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38766
2013-11-11 22:12:58 +00:00
Hauke Mehrtens
5c2f443075 broadcom-wl: version roll
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38765
2013-11-11 22:05:39 +00:00
Hauke Mehrtens
1f9a4fee5a broadcom-wl: support 'wds' interfaces on 'wl1' device
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38764
2013-11-11 22:05:20 +00:00
Hauke Mehrtens
753d52c2a4 broadcom-wl: support probe of 'wds' devices
'nas' requires probe of 'wds' devices to be successful;
so don't fail them.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38763
2013-11-11 22:04:53 +00:00
Hauke Mehrtens
697f4a19e5 broadcom-wl: fix crash when starting multiple virtual interfaces
When enabling multiple VIFS, the driver sometimes crashes.  The frequency
of the crash increases as more VIFS are enabled.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38762
2013-11-11 22:04:26 +00:00
Hauke Mehrtens
b98f77f3d9 broadcom-wl: perform additional cleanup on wl module unload
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38761
2013-11-11 22:03:58 +00:00
Zoltan Herpai
1789fda3fb kernel: of_i2c is moved into i2c-core in 3.12, add kernel version check into modules/i2c.mk
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 38760
2013-11-11 22:03:35 +00:00
Hauke Mehrtens
df493faf12 broadcom-wl: support more virtual interfaces
Read the number of virtual interfaces to support from the device
capabilities; as some newer devices can support up to 16.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38759
2013-11-11 22:03:25 +00:00
Hauke Mehrtens
c926edd72d broadcom-wl: improve device cleanup
Move all device cleanup to "disable_broadcom".

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38758
2013-11-11 22:02:45 +00:00
Hauke Mehrtens
3c2904bfb8 broadcom-wl: add support for setting H/W address
Some devices initialize with a default address (common to all H/W).
The address needs to be changeable so that a unique address can be
assigned to each AP.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38757
2013-11-11 22:02:14 +00:00
Hauke Mehrtens
4ba2f2f731 broadcom-wl: eliminate 'invalid command' when setting ssid
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38756
2013-11-11 22:01:32 +00:00
Hauke Mehrtens
5b4c8c4cc8 broadcom-wl: clean up variable definitions (broadcom.sh)
Specify variables as 'local' where appropriate

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38755
2013-11-11 22:01:12 +00:00
Hauke Mehrtens
aa6a5baf88 broadcom-wl: simplify processing of 'hwmode'
Default gmode to "GOnly" unless explicitly overwridden.  This corrects
processing for 11ng to specify "GOnly" for gmode instead of "Auto"
(which translated to "bg").

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38754
2013-11-11 22:00:39 +00:00
Hauke Mehrtens
d1c55bb33e broadcom-wl: shutdown 'nas' when 'wl' device is disabled
'nas' must be shutdown independently for each 'wl' device to properly
support devices with multiple radios.  Do the shutdown when the device
is disabled instead of when it is brought up.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38753
2013-11-11 21:59:58 +00:00
Hauke Mehrtens
091d80bea7 broadcom-wl: use a single instance of 'nas' per 'wl' device
A single instance of 'nas' can support multiple interfaces; there's
no need to run multiple instances.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38752
2013-11-11 21:59:34 +00:00
Hauke Mehrtens
493f82e8ee broadcom-wl: fix whitespace handling
Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38751
2013-11-11 21:59:07 +00:00
Hauke Mehrtens
1439dc3b9b broadcom-wl: update description for recently added
Update descriptions for 'phytype' and 'band'.

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38750
2013-11-11 21:58:42 +00:00
Hauke Mehrtens
40e8eb2dda broadcom-wl: fix band reporting
Modify the band reporting for broadcom devices to correctly report
HW capability.  Currently, 802.11na devices report "bgn"; but should be
reporting "an".

Signed-off-by: Nathan Hintz <nlhintz@hotmail.com>

SVN-Revision: 38749
2013-11-11 21:58:19 +00:00