KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
22851 commits 1 branch 0 tags 154 MiB
Commit graph

584 commits

Author SHA1 Message Date
Gabor Juhos
ff2ce330a5 ramips: remove 3.6 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35110
 2013-01-12 12:25:30 +00:00
Gabor Juhos
d53f8c3ded ramips: switch to 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35109
 2013-01-12 12:25:28 +00:00
John Crispin
f2f9332350 adds support for Edimax BR-6524N 
fixes #12754

Signed-off-by: <rq@akl.lt>

SVN-Revision: 35020
 2013-01-06 11:11:42 +00:00
John Crispin
569bbe4970 rt5350 switch support fix 
RT5350 frame engine need reset frame engine and embedded switch together.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 34969
 2013-01-02 11:28:21 +00:00
Gabor Juhos
fb07876f25 ramips: rt305x: fix garbled name in mach-mzk-w300nh2.c 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34934
 2012-12-30 08:23:48 +00:00
Gabor Juhos
6708d68c24 ramips: build firmware image for the Planex MZK-W300NH2 Router 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34927
 2012-12-29 17:50:40 +00:00
Gabor Juhos
8b1ac2ae37 ramips: add user-space support for the Planex MZK-W300NH2 Router 
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34926
 2012-12-29 17:50:38 +00:00
Gabor Juhos
d6d06aceb0 ramips: rt305x: add kernel support for the Planex MZK-W300NH2 Router 
This is a Japanese market router, for details check
http://www.planex.co.jp/product/router/mzk-w300nh2/. It has only 16MB
RAM, but base OpenWRT install worked fine for days without issues.
Even an image with built-in Luci worked, but don't expect smooth
experience, due to the lack of RAM. Wifi was not extensively tested,
but seems it is working. GPIO LEDs & buttons, factory flash image and
switch config are confirmed working. Tested against revision 34882 +
this patch.

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3077/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34925
 2012-12-29 17:50:35 +00:00
Gabor Juhos
76537041eb ramips: build image for Airlive AIR3GII 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34924
 2012-12-29 17:50:34 +00:00
Gabor Juhos
3aad9b4c9b ramips: add user-space support for Airlive AIR3GII 
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34923
 2012-12-29 17:50:32 +00:00
Gabor Juhos
3fcb8bb0dd ramips: rt305x: add kernel support for AirLive AIR3GII 
AirLive AIR3GII is Ralink RT5350F based device with
100Mbps switch, USB port, 4MB flash and 32MB ram.

Works: ethernet (LAN & WAN), wps button, led, USB, sysupgrade
Does not work: wifi (chip RT5350), reset button

[   13.390000] phy0 -> rt2800_init_eeprom: Error - Invalid RT chipset 0x5350 detected.
[   13.400000] phy0 -> rt2x00lib_probe_dev: Error - Failed to allocate device.

Other problem: LAN leds is reverse (lights when not cable
connected and vice versa)

[juhosg: move user-space support and image generation changes into
separate patches]

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/2913/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34922
 2012-12-29 17:50:28 +00:00
Felix Fietkau
41a039f464 mips: use -mno-branch-likely for kernel and userspace, saves ~11k kernel size after lzma and ~12k squashfs size in the default configuration 
SVN-Revision: 34909
 2012-12-28 19:17:19 +00:00
Gabor Juhos
69da894432 ramips: fix ASUS WL-330N3G MAC address 
The ASUS WL-330N and WL-330N3G has the MAC address stored at
offset 4, not 40. This is verified by reading original ASUS
firmware GPL_WL-330N3G_source.1028/user/rc/common_ex.c and
GPL_WL-330N_source.1021/user/rc/common_ex.c.

Tested on WL-330N3G, it now gets the same MAC as is printed on
the label on the router.

Signed-off-by: Jan Kardell <jan.kardell@arkub.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34877
 2012-12-24 06:52:41 +00:00
Gabor Juhos
c5a36f13f0 ramips: fix wifi EEPROM extraction on DIR-615-Dx models 
Patch from #12636.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34876
 2012-12-24 06:52:38 +00:00
Gabor Juhos
8105c6badd ramips: unify eeprom file name for the built-in wireless MAC 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34860
 2012-12-22 16:09:03 +00:00
Gabor Juhos
c81b4475c9 ramips: rt3883: fix build error 
The cpuport_cfg field has been renamed to port0_cfg.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34859
 2012-12-22 13:50:47 +00:00
Gabor Juhos
b44cdcde8e ramips: add support for 3.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34845
 2012-12-22 12:11:13 +00:00
Gabor Juhos
b81667cb23 ramips: convert to use {e,o}hci-platform driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34843
 2012-12-22 12:11:08 +00:00
Gabor Juhos
e1b5eeeaa4 ramips: Add USB support for DAP-1350 platform. 
It seems to work as intended, but only lightly tested.

Patch-by: Bryan Steele <brynet@gmail.com>
SIgned-off-by: Gabor Juhos <juhsog@openwrt.org>

SVN-Revision: 34811
 2012-12-20 19:17:17 +00:00
Mirko Vogt
e34a4e0c7b Do not use deprecated path to functions.sh (/etc/functions.sh -> /lib/functions.sh) 
SVN-Revision: 34793
 2012-12-19 16:07:50 +00:00
Gabor Juhos
44b9898251 kernel: update linux 3.6 to 3.6.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34748
 2012-12-18 14:41:16 +00:00
Gabor Juhos
fe8efb72ca ramips: nuke 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34744
 2012-12-17 22:28:11 +00:00
Gabor Juhos
2b378d11c8 kernel: update linux 3.6 to 3.6.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34639
 2012-12-11 20:14:39 +00:00
John Crispin
c2ae0ec02a add support for Hauppauge Broadway 
This patch introduces OpenWRT support for the base Hauppauge/PCTV Broadway
platform.  It doesn't deal with the TV tuner or transcoder at this point,
but the core functionality is working (Ethernet, wireless, USB, buttons,
LEDs, etc).

Signed-off-by: Devin Heitmueller <dheitmueller@kernellabs.com>

SVN-Revision: 34595
 2012-12-10 14:13:01 +00:00
Gabor Juhos
2581173660 kernel: update linux 3.6 to 3.6.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34578
 2012-12-08 15:01:33 +00:00
Gabor Juhos
e0e43655ce ramips: fix serial console for Belkin F5D8235 v1/v2 
Based on a patch from #12533.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34445
 2012-12-02 14:16:12 +00:00
Gabor Juhos
44131bd785 ramips: rt305x: add profile and build image for the Asus RT-N13U 
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34407
 2012-11-29 17:37:14 +00:00
Gabor Juhos
d3994b7408 ramips: rt305x: add user-space support for the Asus RT-N13U 
Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34406
 2012-11-29 17:37:13 +00:00
Gabor Juhos
0ec59e6235 ramips: rt305x: add kernel support for the Asus RT-N13U Wireless-N300 Router 
The work has been backported from openwrt-dreambox with
some modifications & code cleanup.

* updated config-3.3
* updated config-3.6
* renamed rt-n13 to rt-n13u
* fixed mach-rt-n13u.c

[juhosg: move user-space support and image generation into separate
patches]

Signed-off-by: Amit Mendapara <mendapara.amit@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34405
 2012-11-29 17:37:11 +00:00
Gabor Juhos
c2f018fca2 remove common symbols from 3.6 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34404
 2012-11-29 15:21:41 +00:00
Gabor Juhos
1f516235ea remove common symbols from 3.3 configs 
The removed symbols are present in the generic configuration.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34403
 2012-11-29 15:21:35 +00:00
Gabor Juhos
3a4d0ebd5c kernel: update linux 3.6 to 3.6.8 
Also refresh the affected patches.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34402
 2012-11-29 07:42:19 +00:00
Gabor Juhos
57b7879a4e ramips: ramips_eth: use Kconfig definition to enable debug 
The Kconfig identifier to enable debugging in the driver was different from the
actually used one. Fix that.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34332
 2012-11-25 14:25:54 +00:00
Gabor Juhos
21d5df8700 ramips: add DIR-615 D userspace support 
Commit 7c8edac25f23c4fc14239fdc293caa1317649944 introduced new machine and
Makefile changes to build images for this target. However, without the userspace
bits a ramips machine can't use wifi as the necessary "eeprom" data is to be
extracted by a hotplug script; also, sysupgrade support and default led
configuration are missing.

An IRC user reported these changes allowed him to use wifi on his hardware.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34331
 2012-11-25 14:25:27 +00:00
Gabor Juhos
dd092fd10c ramips: set clk_is_20mhz for rt2x00 on RT3352/RT5350 
Signed-off-by: Daniel Golle <dgolle@allnet.de>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34270
 2012-11-20 07:19:10 +00:00
Gabor Juhos
ff1e854511 kernel: update linux 3.6 to 3.6.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34227
 2012-11-18 08:41:31 +00:00
John Crispin
dd8c625424 previous commit pushed 1 file too many ;) 
SVN-Revision: 34179
 2012-11-12 21:36:23 +00:00
John Crispin
ced0cf3a94 move ethernet hw init to init/uninit functions 
This should fix the stalled irq problem seen by several people.
This is not the real fix, but rather moves the bug to the un/init patch of the driver.
The real bug still needs to be fixed, but this workaround should be suffcient to make
the ethernet stable.

SVN-Revision: 34177
 2012-11-12 21:35:01 +00:00
John Crispin
6090ddc896 adds fon20n profile 
SVN-Revision: 34112
 2012-11-07 20:26:31 +00:00
John Crispin
3991526989 ramips: use kernel 3.6.6 
## Booting image at 80800000 ...
   Image Name:   MIPS OpenWrt Linux-3.6.6
   Created:      2012-11-06  14:19:54 UTC

 System Control Status = 0x20440000
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    3560768 Bytes =  3.4 MB
   Load Address: 80000000
   Entry Point:  80000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
No initrd
## Transferring control to Linux (at address 80000000) ...
## Giving linux memsize in MB, 32

Starting kernel ...

[    0.000000] Linux version 3.6.6 (daniel@localhost.localdomain) (gcc version 4.6.4 20121001 (prerelease) (Linaro GCC 4.6-2012.10) ) #2 Tue Nov 6 16:19:48 IST 2012
[    0.000000] bootconsole [early0] enabled
[    0.000000] CPU revision is: 0001964c (MIPS 24KEc)
[    0.000000] Ralink RT3052 id:1 rev:2 running at 384.00 MHz
[    0.000000] Determined physical RAM map:
[    0.000000]  memory: 02000000 @ 00000000 (usable)
[    0.000000] Initrd not found or empty - disabling initrd
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x00000000-0x01ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00000000-0x01ffffff]
[    0.000000] Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
[    0.000000] Primary data cache 16kB, 4-way, VIPT, no aliases, linesize 32 bytes
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8128
[    0.000000] Kernel command line:  console=ttyS1,57600n8 board=ALL0239-3G mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) rootfstype=squashfs,jffs2
[    0.000000] PID hash table entries: 128 (order: -3, 512 bytes)
[    0.000000] Dentry cache hash table entries: 4096 (order: 2, 16384 bytes)
[    0.000000] Inode-cache hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] __ex_table already sorted, skipping sort
[    0.000000] Writing ErrCtl register=0000c388
[    0.000000] Readback ErrCtl register=0000c388
[    0.000000] Memory: 27048k/32768k available (2015k kernel code, 5720k reserved, 498k data, 2676k init, 0k highmem)
[    0.000000] SLUB: Genslabs=9, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1
[    0.000000] NR_IRQS:48
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.000000] console [ttyS1] enabled, bootconsole disabled
[    0.010000] Calibrating delay loop... 255.59 BogoMIPS (lpj=1277952)
[    0.090000] pid_max: default: 32768 minimum: 301
[    0.100000] Mount-cache hash table entries: 512
[    0.110000] NET: Registered protocol family 16
[    0.120000] MIPS: machine is Allnet ALL0239-3G
[    0.140000] bio: create slab <bio-0> at 0
[    0.150000] Switching to clocksource MIPS
[    0.160000] NET: Registered protocol family 2
[    0.170000] TCP established hash table entries: 1024 (order: 1, 8192 bytes)
[    0.180000] TCP bind hash table entries: 1024 (order: 0, 4096 bytes)
[    0.200000] TCP: Hash tables configured (established 1024 bind 1024)
[    0.210000] TCP: reno registered
[    0.220000] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.230000] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.240000] NET: Registered protocol family 1
[    5.460000] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    5.470000] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[    5.490000] msgmni has been set to 52
[    5.500000] io scheduler noop registered
[    5.510000] io scheduler deadline registered (default)
[    5.520000] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[    5.530000] serial8250: ttyS0 at MMIO 0x10000500 (irq = 13) is a 16550A
[    5.550000] serial8250: ttyS1 at MMIO 0x10000c00 (irq = 20) is a 16550A
[    5.560000] physmap platform flash device: 00800000 at bf000000
[    5.580000] physmap-flash.0: Found 1 x16 devices at 0x0 in 16-bit bank. Manufacturer ID 0x000001 Chip ID 0x001000
[    5.600000] Amd/Fujitsu Extended Query Table at 0x0040
[    5.610000]   Amd/Fujitsu Extended Query version 1.3.
[    5.620000] number of CFI chips: 1
[    5.620000] 6 cmdlinepart partitions found on MTD device physmap-flash.0
[    5.640000] Creating 6 MTD partitions on "physmap-flash.0":
[    5.650000] 0x000000000000-0x000000030000 : "u-boot"
[    5.660000] 0x000000030000-0x000000040000 : "u-boot-env"
[    5.680000] 0x000000040000-0x000000050000 : "factory"
[    5.690000] 0x000000050000-0x000000130000 : "kernel"
[    5.700000] 0x000000130000-0x000000800000 : "rootfs"
[    5.710000] mtd: partition "rootfs" set to be root filesystem
[    5.730000] split_squashfs: error occured while reading from "physmap-flash.0"
[    5.740000] 0x000000050000-0x000000800000 : "firmware"
[    5.760000] ramips-wdt ramips-wdt: timeout value must be 0 < timeout <= 33, using 33
[    5.780000] TCP: cubic registered
[    5.780000] NET: Registered protocol family 17
[    5.790000] 8021q: 802.1Q VLAN Support v1.8
[    5.820000] Freeing unused kernel memory: 2676k freed
[    6.490000] Button Hotplug driver version 0.4.1
- preinit -
Press the [f] key and hit [enter] to enter failsafe mode
- regular preinit -
- init -

Please press Enter to activate this console. [   10.150000] Compat-drivers backport release: compat-drivers-2012-09-04-2-gddac993
[   10.170000] Backport based on wireless-testing.git master-2012-09-07
[   10.180000] compat.git: wireless-testing.git
[   10.210000] cfg80211: Calling CRDA to update world regulatory domain
[   10.230000] cfg80211: World regulatory domain updated:
[   10.240000] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.250000] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.270000] cfg80211:   (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.280000] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.300000] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.310000] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.430000] NET: Registered protocol family 10
[   10.760000] PPP generic driver version 2.4.2
[   10.820000] l2tp_core: L2TP core driver, V2.0
[   10.840000] l2tp_netlink: L2TP netlink interface
[   10.870000] sit: IPv6 over IPv4 tunneling driver
[   10.920000] ip_tables: (C) 2000-2006 Netfilter Core Team
[   11.060000] NET: Registered protocol family 24
[   11.090000] nf_conntrack version 0.5.0 (464 buckets, 1856 max)
[   11.230000] l2tp_ppp: PPPoL2TP kernel driver, V2.0
[   11.410000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[   14.510000] device eth0.1 entered promiscuous mode
[   14.520000] device eth0 entered promiscuous mode
[   14.530000] IPv6: ADDRCONF(NETDEV_CHANGE): eth0.1: link becomes ready
[   14.550000] br-lan: port 1(eth0.1) entered forwarding state
[   14.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.560000] br-lan: port 1(eth0.1) entered forwarding state
[   16.600000] ramips-wdt: timeout value 60 must be 0 < timeout <= 33, using 33

BusyBox v1.19.4 (2012-11-06 13:40:37 IST) built-in shell (ash)
Enter 'help' for a list of built-in commands.

  _______                     ________        __
 |       |.-----.-----.-----.|  |  |  |.----.|  |_
 |   -   ||  _  |  -__|     ||  |  |  ||   _||   _|
 |_______||   __|_____|__|__||________||__|  |____|
          |__| W I R E L E S S   F R E E D O M
 -----------------------------------------------------
 BARRIER BREAKER (Bleeding Edge, r34079)
 -----------------------------------------------------
  * 1/2 oz Galliano         Pour all ingredients into
  * 4 oz cold Coffee        an irish coffee mug filled
  * 1 1/2 oz Dark Rum       with crushed ice. Stir.
  * 2 tsp. Creme de Cacao
 -----------------------------------------------------
root@OpenWrt:/#

SVN-Revision: 34111
 2012-11-07 20:26:21 +00:00
John Crispin
480892226d ramips: add HAVE_CLK to Kconfig on all ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34110
 2012-11-07 20:26:04 +00:00
John Crispin
feb31be6af ramips: add linux-3.6 configuration for ramips socs 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/rt288x/config-3.6
 create mode 100644 target/linux/ramips/rt305x/config-3.6
 create mode 100644 target/linux/ramips/rt3883/config-3.6

SVN-Revision: 34109
 2012-11-07 20:25:55 +00:00
John Crispin
ca1fcaed5b ramips: port patches to linux-3.6 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

 create mode 100644 target/linux/ramips/patches-3.6/001-mips-add-cp0-compare-irq-function.patch
 create mode 100644 target/linux/ramips/patches-3.6/010-mtd_fix_cfi_cmdset_0002_erase_status_check.patch
 create mode 100644 target/linux/ramips/patches-3.6/011-mtd-cfi_cmdset_0002-force-word-write.patch
 create mode 100644 target/linux/ramips/patches-3.6/100-mips-ralink-core.patch
 create mode 100644 target/linux/ramips/patches-3.6/101-rt288x_serial_driver_hack.patch
 create mode 100644 target/linux/ramips/patches-3.6/102-rt288x-pci-driver-hook.patch
 create mode 100644 target/linux/ramips/patches-3.6/103-ethernet.patch
 create mode 100644 target/linux/ramips/patches-3.6/104-ramips-watchdog-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-ramips-spi-driver.patch
 create mode 100644 target/linux/ramips/patches-3.6/105-usb_dwc_otg.patch
 create mode 100644 target/linux/ramips/patches-3.6/106-rt3883-pci-support.patch
 create mode 100644 target/linux/ramips/patches-3.6/200-rt3883-ehci-glue.patch
 create mode 100644 target/linux/ramips/patches-3.6/201-rt3883-ohci-glue.patch

SVN-Revision: 34108
 2012-11-07 20:25:34 +00:00
Gabor Juhos
a0dd47bbed ramips: enable USB power on the DIR-645 
Closes #12422.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 34082
 2012-11-05 11:04:45 +00:00
Gabor Juhos
829aaedcbf ramips: add restorefactory to default package set for ALL0239-3G and ALL0256N 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 34078
 2012-11-05 06:58:53 +00:00
Gabor Juhos
e91dc2e5b3 target: refresh all target configs with kconfig.pl 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33987
 2012-10-29 10:11:05 +00:00
Gabor Juhos
db5eea6acd ramips: use correct key code for the RFKILL switch on the TEW-691GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33943
 2012-10-26 18:53:44 +00:00
Gabor Juhos
b530d9d2b3 ramips: disable 5GHz on the built in wireless mac of the TEW-69{1,2}GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33864
 2012-10-19 17:42:22 +00:00
Gabor Juhos
6ca2970e4b ramips: add profile and build image for the TEW-691GR board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33852
 2012-10-18 07:23:13 +00:00
Gabor Juhos
21180e29f7 ramips: add user-space support for TEW-691GR 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 33851
 2012-10-18 07:23:12 +00:00