Commit graph

31606 commits

Author SHA1 Message Date
John Crispin
ca1db6b5ce lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431)
SVN-Revision: 45897
2015-06-05 14:11:36 +00:00
Felix Fietkau
9e233fb241 mtd: add missing <endian.h> include
trx.c in mtd would not include endian.h, so on systems that do not have
this header implicitly included from the other headers (like musl), both
__BYTE_ORDER and __BIG_ENDIAN would be undefined and thus 0, leading to
it always presuming a big-endian system. this would lead to issues when
running mtd fixtrx on little-endian systems, as it would never recognize
the TRX magic as result of the broken STORE32_LE() macro.

Signed-off-by: Shiz <hi@shiz.me>
Tested-by: Shiz <hi@shiz.me>

SVN-Revision: 45896
2015-06-05 09:00:02 +00:00
Felix Fietkau
4480fbce62 ramips: improve tx clean up and add fe_tx_ring struct
if there is any new tx need to clean up. do it in next napi poll.
collect tx related members to fe_tx_ring struct. for better
cache usage and more readable.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 45895
2015-06-05 08:59:57 +00:00
Felix Fietkau
2a66c9886f ramips: change ethernet napi interrupt sequence
when open device. first ready napi software rx.
then enable hardware interrupt.
final start software tx queue to send data.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 45894
2015-06-05 08:59:48 +00:00
Felix Fietkau
0d043d3ac0 ramips: fix ethernet vlan tx offload support check when delete
Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 45893
2015-06-05 08:59:42 +00:00
Felix Fietkau
4746e539e0 ramips: fix the memory map on FireWRT
Avoid the use of memory marked as reserved

MT7621 support 512MB memory.
According to "MT7621_ProgrammingGuide_Preliminary_Platform.pdf"
0x0~0x1c000000        448MB
0x20000000~0x4000000  64MB
total 512MB

Signed-off-by: wengbj <fl.service@t-firefly.com>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45892
2015-06-05 08:07:41 +00:00
Felix Fietkau
5a64d5337b kernel: adjust mips highmem offset to avoid the need for -mlong-calls on systems with >256M RAM
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45891
2015-06-05 08:07:35 +00:00
Felix Fietkau
69d79ea951 ramips: use highmem on the FireWRT board
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45890
2015-06-04 21:45:24 +00:00
Felix Fietkau
d7023e105f ramips: enable highmem support for mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45889
2015-06-04 21:45:12 +00:00
Felix Fietkau
7a23eae245 ramips: remove prompt of the USB_MT7621_XHCI_PLATFORM symbol to avoid issues with kernel_menuconfig
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45888
2015-06-04 21:45:01 +00:00
Felix Fietkau
2c74406aa2 gmp: disable assembly to fix build on systems that use PIE binaries
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45887
2015-06-04 21:44:52 +00:00
Felix Fietkau
555df40af9 musl: update to version 1.1.9
Patch to 2015-06-04 to fix ldso related regressions on PPC and MIPS.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45886
2015-06-04 20:08:39 +00:00
Steven Barth
17c90e94cf Add sch_fq and sch_pie to the kmod-sched package.
These are two new packet schedulers introduced in Linux 3.12 and 3.14
respectively. sch_fq is a perfect fairness queueing scheduler that also
adds pacing on host TCP flows, and sch_pie is an AQM.

Having them available in kmod-sched makes it easier for people to test
these new queueing schemes.

Signed-off-by: Toke Høiland-Jørgensen <toke@toke.dk>

SVN-Revision: 45885
2015-06-04 05:44:44 +00:00
John Crispin
281cb95a9d lldpd: add option to disable custom TLVs
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 45884
2015-06-03 13:59:14 +00:00
John Crispin
5fe5aeaa72 procd: work around a event race
there is a conceptual design flaw in our interface events. workaround this by
disabling duplicate message supression in procd. we need to fix this properly
for the next release

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45883
2015-06-03 13:59:08 +00:00
John Crispin
2575637497 lantiq: Make the CRC32 poly value configurable per device
This also adds the old hardcoded value to the VGV7519BRN profile to make
sure that images are still generated correctly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 45882
2015-06-03 13:58:57 +00:00
John Crispin
5d3f0eea1c tools/firmware-utils: Allow changing the CRC32 poly value in mkbrnimg
VGV7519 is currently the only device with brnboot support. It seems to
be happy with 0x2083b8ed as CRC32 poly. However, VGV7510KW22 fails to
validate the checksum - it requires 0x04c11db7 instead.

I have built an brnboot image manually on the command line, once with
the old code and then with the new code but passing the old CRC32
poly value. Both resulted in a brnboot image with the same sha1sum.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 45881
2015-06-03 13:58:48 +00:00
John Crispin
f9f093baa3 ipq806x: missing symbol
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45880
2015-06-03 13:58:30 +00:00
Felix Fietkau
3d35dfb782 Revert "musl: update to version 1.1.9" (r45754)
The current version seems to be broken on MIPS.

SVN-Revision: 45879
2015-06-03 00:22:51 +00:00
Hauke Mehrtens
c1a3a1ac2d ncurses: Fix building with gcc 5.1
This patch is taken from the gentoo guys who extracted this from a large
upstream commit (with many unrelated changes).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 45878
2015-06-02 21:54:54 +00:00
Hauke Mehrtens
d315659e1e kernel: add broadcom phy driver
This adds the Broadcom phy driver.
This also loses #19545.
Thank you bigtman43

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 45877
2015-06-02 20:01:21 +00:00
John Crispin
2b9ac1e0af procd: add a 10 second delay to the interface triggers
this is an ugly hack that will be removed when the netifd maintainers
have time to look at the problem.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45876
2015-06-02 12:03:20 +00:00
Jonas Gorski
6d07290de3 brcm63xx: fix livebox image generation
Livebox does need the uncompressed kernel, so just create it during
image generation.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45875
2015-06-02 10:23:45 +00:00
Felix Fietkau
913ca8200a ath9k: fix an issue with stopping rx/tx dma on AR93xx
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45874
2015-06-02 08:47:21 +00:00
Felix Fietkau
91467cec6f hostapd: add a new option to control HT coexistance separate from noscan
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45873
2015-06-02 08:39:19 +00:00
John Crispin
5e5c821233 kernel: remove stmmac kernel package
We just moved the stmmac support in the kernel for ipq806x. Therefore,
nobody needs this driver so we'll just get rid of it.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45872
2015-06-01 20:11:45 +00:00
John Crispin
ff324050c3 ipq806x: move stmmac support in the kernel binary
Ethernet GMAC is built-in the SoC, so there is no need to enable it as a
module. We'll just assume we need it. That's what is done for other
platform where this driver is used so it'll make things more consistent.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>

SVN-Revision: 45871
2015-06-01 20:11:35 +00:00
Jo-Philipp Wich
0d19e8da7f include: image.mk: ensure that $(KDIR)/tmp exists in the IB case as well
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45870
2015-06-01 18:00:35 +00:00
Jonas Gorski
9c6945d7a1 brcm63xx: delete uncompressed kernels after use
Delete the dtb appended, uncompressed kernels after having compressed
them, so they don't end in the image builder.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45869
2015-06-01 12:37:34 +00:00
Jonas Gorski
43c0a725af lantiq: fix VG3503J rootfs offset
In r44391 the kernel partion size was increased to allow larger kernels,
but the rootfs partition offset was missed. Fix this by setting the
rootfs offset to the expected value.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 45868
2015-06-01 12:37:24 +00:00
Steven Barth
09ad0ae4bd odhcp6c: silence fw3 warnings
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 45867
2015-06-01 08:31:13 +00:00
Jo-Philipp Wich
11f05afd26 imagebuilder: create cache directory if needed (#18629)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45866
2015-06-01 06:15:39 +00:00
Rafał Miłecki
6bc9e00e94 kernel: backport ssb fix for WRT350N v1 (BCM4705) reboots
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45865
2015-06-01 06:11:26 +00:00
John Crispin
c0c8d3a95f au1000: add a missing dependency to the pcmcia module
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45864
2015-06-01 06:03:52 +00:00
Jo-Philipp Wich
570790173d iwinfo: fix segfault in mtd parsing code (#19768)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45863
2015-06-01 04:31:45 +00:00
John Crispin
1cc4a10d2c kernel: bluetooth: Add dependency to kmod-crypto-ecb
Add dependency of kmod-crypto-ecb to kmod-bluetooth to avoid the kernel warning
"Bluetooth: Unable to create crypto context".

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 45860
2015-05-31 17:46:24 +00:00
John Crispin
2bc9e8e50c lldpd: disable xml explicitly
This prevents auto-detection of libxml2 and thus the error:
Package lldpd is missing dependencies for the following libraries:
libxml2.so.2

Preventing a dependency to libxml2 is preferred, since libxml2
would be a out-of-(core-)tree dependency.

Reported-by: Buildbot
Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 45859
2015-05-31 17:46:09 +00:00
John Crispin
157c9199b3 ca-certificates: update to version 20150426
update to version 20150426

Signed-off-by: Christian Schoenebeck <christian.schoenebeck@gmail.com>

SVN-Revision: 45858
2015-05-31 17:45:54 +00:00
John Crispin
6938dac23b malta: add default network configuration
I didn't figure out how to achieve this using uci-defaults-new.sh,
so use old-school uci-defaults script as that's what is used on
realview as well.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 45857
2015-05-31 17:45:43 +00:00
Felix Fietkau
fa2dfdb74b mac80211: make netifd script create AP interface directly
Before starting hostapd we create interface for it. The problem is we
try to create STA interface just to let hostapd change it to AP later.

It may fail if device doesn't support STA interfaces or if we already
hit a limit. Consider following phy (it's from BCM43602 and brcmfmac):
$ iw phy phy0 info | tail
        valid interface combinations:
                 * #{ IBSS, managed } <= 1, #{ AP } <= 4, #{ P2P-client, P2P-GO } <= 1, #{ P2P-device } <= 1,
                   total <= 3, #channels <= 1

Trying to setup 2 interfaces: STA + AP results in:
radio0 (1101): command failed: Operation not supported (-95)
radio0 (1101): command failed: Operation not supported (-95)
radio0 (1101): command failed: Operation not supported (-95)
radio0 (1101): command failed: Operation not supported (-95)
radio0 (1101): Configuration file: /var/run/hostapd-phy0.conf
radio0 (1101): Could not read interface wlan0-1 flags: No such device

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 45856
2015-05-30 23:08:57 +00:00
Felix Fietkau
677741ef95 ar71xx: use Image/BuildLoaderPatched for TPLINK-SAFELOADER images
Building the loader in Image/Build/TPLINK-SAFELOADER would break the image
builder as no target compiler is available in that stage.

Fixes #19580

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45855
2015-05-30 22:55:50 +00:00
Felix Fietkau
64b789db56 ar71xx: add Image/BuildLoaderPatched macro
In contrast to Image/BuildLoader, Image/BuildLoaderPatched first patches the
kernel command line in the image and then builds the loader without command
line. This allows building loaders for systems which don't boot correctly when
the kernel command line is provided by the loader (like the TP-LINK CPE series).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 45854
2015-05-30 22:55:40 +00:00
Jo-Philipp Wich
531a7e469a uhttpd: use 307 for HTTPS redirections to retain request method
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45853
2015-05-30 21:14:33 +00:00
Jo-Philipp Wich
4f58248a7d uhttpd: add support for enforcing https
Also set HTTPS environment variable for CGI programs on SSL connections.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45852
2015-05-30 20:55:14 +00:00
John Crispin
b34988d5d0 lantiq: fix imagebuilder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45851
2015-05-30 20:28:57 +00:00
Jo-Philipp Wich
be16b184e2 uhttpd: inhibit chunked transfer encoding for static file responses
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45850
2015-05-30 14:05:40 +00:00
Jo-Philipp Wich
aa304279c3 kernel: kmod-stmmac depends on kmod-libphy
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 45849
2015-05-30 13:57:54 +00:00
John Crispin
50da78705a kernel: upstream fix: mount overlayfs r/o if workdir cannot be created
move the patch to the proper folder

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 45848
2015-05-30 13:16:23 +00:00
Felix Fietkau
e56b6f6e66 ramips: fix swapped colors for router LED on WHR-1166D (thx, Björn)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45847
2015-05-30 09:39:37 +00:00
Felix Fietkau
1e659c29ec ramips: rename status led to wifi on WHR-300HP2, WHR-1166D, WHR-600D
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 45846
2015-05-30 09:01:41 +00:00