KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
23204 commits 1 branch 0 tags 154 MiB
Commit graph

23204 commits

This branch
This branch
All branches
Author SHA1 Message Date
Jonas Gorski
c98b12d911 samba36: fix segmentation fault when trying to add non-existent users 
Based on a patch from НКВД. Closes #12962.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35610
 2013-02-16 11:39:42 +00:00
Florian Fainelli
30ccd13c81 hotplug2: depend on libbsd only when targetting eglibc 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35608
 2013-02-15 13:25:18 +00:00
Florian Fainelli
f209bf0eb6 libevent2: do not add librt dependency when targetting eglibc 
This is already taken care of by PKG_DEFAULT_DEPENDS

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35607
 2013-02-15 13:25:15 +00:00
Florian Fainelli
2cf1a8d73f libbsd: make it available for eglibc only 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35606
 2013-02-15 13:25:12 +00:00
Jonas Gorski
485e52e1d8 bcm63xx: make nvram checksum failures non fatal 
fixes #12982.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 35605
 2013-02-15 12:23:49 +00:00
Gabor Juhos
162b8e23a5 kernel: update linux 3.7 to 3.7.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35604
 2013-02-15 07:36:15 +00:00
Gabor Juhos
f35c369710 generic: ar8216: move PHY4 RGMII workaround code out of the loop 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35603
 2013-02-14 14:55:40 +00:00
Gabor Juhos
d64888ffc0 generic: ar8216: register the switch from the probe routine 
Currently the switch gets registered when an ethernet
driver connects to a PHY of the switch. This method does
not work with the ethernet drivers which are connecting
to the PHY from their ndo_open callback. With those
ethernet drivers, the driver tries to register the switch
each time when the etherned device is opened and this causes
a deadlock.

Move the switch registration into the probe routine to fix
this problem.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35602
 2013-02-14 14:01:24 +00:00
Florian Fainelli
31dc805f88 x86: update config-3.7 for x86 (turn off CONFIG_GPIO_ICH) 
Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35601
 2013-02-14 13:00:07 +00:00
Florian Fainelli
22e8b168c8 openssl: update OpenSSL to 1.0.1e, fix Cisco DTLS. 
1.0.1d had a rushed fix for CVE-2013-0169 which broke in certain
circumstances. 1.0.1e has the fix for TLS.

Also include a further patch from the 1.0.1 branch which fixes the
breakage this introduced for Cisco's outdated pre-standard version of
DTLS, as used by OpenConnect.

Update mirror URLs to reflect current reality.

Signed-off-by: David Woodhouse <David.Woodhouse@intel.com>
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 35600
 2013-02-14 13:00:03 +00:00
Hauke Mehrtens
c0f6c75cf7 brcm47xx: if the cpuport of the switch is port 8 assume vlan0ports: "1 2 3 4 8" and vlan0ports: "0 8" 
SVN-Revision: 35597
 2013-02-14 12:38:16 +00:00
Hauke Mehrtens
243c582213 switch: export name of device found via /proc 
SVN-Revision: 35596
 2013-02-14 12:36:52 +00:00
Hauke Mehrtens
60913bbac6 switch: export cpuport, ports and vlans via /proc 
SVN-Revision: 35595
 2013-02-14 12:36:13 +00:00
Gabor Juhos
c75c1e03a3 firmware-utils/mktplinkfw: add support for the TL-WDR4900 v1 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35593
 2013-02-13 16:51:24 +00:00
Gabor Juhos
9d86ba2ed4 mpc85xx: enable swconfig and the ar8216 driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35592
 2013-02-13 16:51:23 +00:00
Gabor Juhos
6d18518e02 mpc85xx: enable the squashfs driver 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35591
 2013-02-13 16:51:21 +00:00
Gabor Juhos
c3b3f77621 mpc85xx: enable XZ_DEC_BCJ and XZ_DEC_POWERPC support 
Squashfs is unable to decompress some blocks without that:

[  199.494500] SQUASHFS error: xz_dec_run error, data probably corrupt
[  199.500910] SQUASHFS error: squashfs_read_data failed to read block 0xbff26
[  199.508016] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.514440] SQUASHFS error: Unable to read page, block bff26, size 153f8
[  199.521311] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.527724] SQUASHFS error: Unable to read page, block bff26, size 153f8
[  199.534594] SQUASHFS error: Unable to read data cache entry [bff26]
[  199.541009] SQUASHFS error: Unable to read page, block bff26, size 153f8

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35590
 2013-02-13 16:51:19 +00:00
Gabor Juhos
7484006498 ar71xx: fix factory image creation for dir-825-c1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35589
 2013-02-13 16:36:26 +00:00
Gabor Juhos
5f10ec3c36 ar71xx: fix switch-config for dir-825-c1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35588
 2013-02-13 16:36:23 +00:00
Hauke Mehrtens
54ca3eed5d brcm47xx: configure vlan correctly on some recent devices. 
SVN-Revision: 35587
 2013-02-13 16:05:52 +00:00
Hauke Mehrtens
17c18e23ab switch: add support for BCM53125 
SVN-Revision: 35586
 2013-02-13 16:05:32 +00:00
Hauke Mehrtens
446414f367 switch: resetting and enabling vlan write for gigabit switches 
This patch makes it possible to reset and enable writing vlans to recent switchs.

This is based on a patch by jcharest and the Broadcom SDK.

SVN-Revision: 35585
 2013-02-13 16:05:13 +00:00
Hauke Mehrtens
43b4f67f25 switch: read and write vlan config from and to gigabit switches 
This patch makes it possible to read and write the vlan config from and to recent switchs.

This is based on a patch by jcharest and the Broadcom SDK.

SVN-Revision: 35584
 2013-02-13 16:04:50 +00:00
Hauke Mehrtens
8ab78d1096 switch: improve robo_switch_enable() 
This is based on a patch by jcharest and the Broadcom SDK.

SVN-Revision: 35583
 2013-02-13 16:04:18 +00:00
Hauke Mehrtens
b8a84038a5 switch: fix switches with more than 6 ports 
This is based on a patch by jcharest and the Broadcom SDK.

SVN-Revision: 35582
 2013-02-13 16:03:47 +00:00
Hauke Mehrtens
3c51948454 switch: reverse if else in handle_vlan_port_read() 
SVN-Revision: 35581
 2013-02-13 16:03:27 +00:00
Hauke Mehrtens
9d3b0f5661 switch: the BCM5365 is a special switch and the BCM5350 or BCM5325 is the normal case. 
This makes it easier to compare this code with the code from the Broadcom SDK.

SVN-Revision: 35580
 2013-02-13 16:03:03 +00:00
Hauke Mehrtens
827e315017 switch: reset switch before using it. 
SVN-Revision: 35579
 2013-02-13 16:02:41 +00:00
Hauke Mehrtens
f3360fdf67 switch: improve error handling in robo_probe() 
SVN-Revision: 35578
 2013-02-13 16:02:20 +00:00
Hauke Mehrtens
3f0c0c6935 switch: run cleanfile over the source code 
SVN-Revision: 35577
 2013-02-13 16:01:50 +00:00
Felix Fietkau
31718416e6 mac80211: add some small fixes for minstrel_ht CCK support 
SVN-Revision: 35576
 2013-02-13 09:53:28 +00:00
Hauke Mehrtens
4663d424a3 brcm47xx: add some more fixes to bgmac 
Thank you Rafał Miłecki and Nathan Hintz

SVN-Revision: 35574
 2013-02-12 20:10:38 +00:00
Hauke Mehrtens
7c0208b336 brcm47xx: update tg3 to the version send upstream 
SVN-Revision: 35573
 2013-02-12 20:09:15 +00:00
Luka Perkov
7973ef64d6 mvebu: remove boards suffix 
SVN-Revision: 35572
 2013-02-12 10:18:53 +00:00
Gabor Juhos
bae4bfe3f8 kernel: update linux 3.7 to 3.7.7 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35571
 2013-02-12 09:51:11 +00:00
Steven Barth
99b69fd9c5 odhcp6c: allow setting a user-provided prefix as well 
SVN-Revision: 35570
 2013-02-12 08:23:54 +00:00
Jo-Philipp Wich
eeaf2c0b5a iptables: fix bad PKG_RELEASE in previous commit 
SVN-Revision: 35569
 2013-02-11 22:14:38 +00:00
Jo-Philipp Wich
916902b1d2 iptables: add --lenient switch to iptables-restore and ip6tables-restore that allows to skip erroneous lines 
SVN-Revision: 35568
 2013-02-11 21:58:42 +00:00
Gabor Juhos
1f9ede9cfc ar71xx: add script for automatic switch name migration 
Thanks to Jonas Gorski for the help.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35567
 2013-02-11 21:41:16 +00:00
Felix Fietkau
0564b6beef mac80211: add CCK rate support to minstrel_ht to improve range 
SVN-Revision: 35566
 2013-02-11 18:59:14 +00:00
Felix Fietkau
1810b80ec0 mac80211/hostapd: short_preamble is a per-vif option and should be enabled by default 
SVN-Revision: 35565
 2013-02-11 18:59:10 +00:00
Felix Fietkau
2e7a4b088d ar71xx: allow unknown multicast frames to pass to the CPU on AR934x 
SVN-Revision: 35564
 2013-02-11 18:59:05 +00:00
Gabor Juhos
9525a075c1 ar8216: remove superfluous code from ar8216_config_init 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35562
 2013-02-11 16:57:31 +00:00
Gabor Juhos
94806a13af ar71xx: use switchX names in network configuration 
Accessing the AR8xxx switches via the name of the
attached ethernet device is not possible since
r35560. Change the uci-defaults script to use
switchX names in switch configurations.

Reported-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35561
 2013-02-11 16:54:52 +00:00
Gabor Juhos
9c86d268eb generic: ar8216: don't use ethernet device name in register_switch 
The switches are accessed via an MDIO bus. Set the alias
to the name of the MDIO bus, and show that in the message
along with the name of the switch switch device.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35560
 2013-02-11 16:11:31 +00:00
Gabor Juhos
3f3eba88f6 generic: ar8216: reuse the private data from ar8216_probe 
The private data of the switch is already
allocated in ar8216_priv, assign that to
each PHY on the same MDIO bus. Also remove
the redundant code from ar8216_config_init.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35559
 2013-02-11 16:11:30 +00:00
Gabor Juhos
1afb759b35 generic: ar8216: use phydev instead of pdev everywhere 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35555
 2013-02-11 13:25:43 +00:00
Gabor Juhos
0b1fe07e8e generic: ar8216: use pr_* macros for kernel messages 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35554
 2013-02-11 13:14:00 +00:00
Steven Barth
b8c796fbd7 odhcp6c: Various bugfixes * Don't send undesired suggestions for preferred and valid lifetimes * Be less verbose in logging 
SVN-Revision: 35553
 2013-02-11 12:30:16 +00:00
Gabor Juhos
eea297884e generic: ar8216: fix PHY features setup 
Sujith says:

This commit breaks the WAN port on my AP96 - DHCP fails.
Reverting it fixes the issue.

  commit b67cc3a0cdd02973610d4d5a63226d1c44841e94
  Author: juhosg <juhosg@3c298f89-4303-0410-b956-a3cf2f4a3e73>
  Date:   Fri Feb 8 09:13:18 2013 +0000

    generic: ar8216: simplify phy features setup

    Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

    git-svn-id: svn://svn.openwrt.org/openwrt/trunk@355183c298f89-4303-0410-b956-a3cf2f4a3e73

This change restores the previous behaviour and moves
the code into the ar8216_probe function.

Reported-by: Sujith Manoharan <sujith@msujith.org>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
Tested-by: Sujith Manoharan <sujith@msujith.org>

SVN-Revision: 35549
 2013-02-11 10:05:35 +00:00