Commit graph

13 commits

Author SHA1 Message Date
Gabor Juhos
c315ce403b ar71xx: merge DIR-600 A1 and DIR-615 E4 support
SVN-Revision: 29976
2012-01-31 18:37:29 +00:00
Gabor Juhos
dd47afc197 ar71xx: fix ethernet LEDs on the DIR-600-A1 board
SVN-Revision: 29975
2012-01-31 18:37:24 +00:00
Gabor Juhos
8200f0c61a ar71xx: unify LED names on D-Link boards
SVN-Revision: 29974
2012-01-31 18:37:15 +00:00
Gabor Juhos
faeca86e50 ar71xx: support for D-LINK DIR-615 rev. E4
This patch adds support for D-LINK DIR-615 E4 board. It's mostly based
on the existing support for DIR-600 A1, with some changes in the leds
configuration.

It's an updated version of the patch that reliably works on my hw for
about a year (it was built from trunk on Jan 2011). When I decided to
update the firmware and checked for the current support for that device,
I also found previously posted patches by Alexey Loukianov that
mentioned some stability issues. I'm not sure where could be the
difference, the patches are very similar except the wmac led pin number
- I was using 1, and those patches used 17.

[juhosg: add 3.2 support]

Signed-off-by: Vadim Girlin <vadimgirlin@gmail.com>

SVN-Revision: 29973
2012-01-31 18:37:09 +00:00
Gabor Juhos
97e4ddd012 ar71xx: add support for TP-Link TL-MR11U
Adds support for TL-MR11U, a portable router with very similar
hardware to the TL-WR703N and TL-MR3020, but with an onboard
2000mAh battery.

Tested, working:
All interfaces (Ethernet, 802.11n, USB)
WPS & Reset switches (Power appears to be a hardware slider)
Ethernet, Wifi, 3G LEDs (Power & charging LEDs hardware controlled)
Sysupgrade

[juhosg: fix indentations to use TABs instead of spaces, fix 3.2 patch
breakage]

Signed-off-by: Simon Taylor <simon.taylor.uk@gmail.com>

SVN-Revision: 29972
2012-01-31 18:37:01 +00:00
Florian Fainelli
eeb00634a7 add support for the Atheros AP113 reference board
This reference board is equipped with:
- AR7242 SoC
- AR9580 on-board Wi-Fi
- AR8316 switch

SVN-Revision: 29935
2012-01-28 13:19:49 +00:00
Gabor Juhos
e1e84badaa ar71xx: add support for Compex WPE72/WPE72NX
This patch adds support for Compex WPE72 bare board and Compex WPE72NX
Indoor Access Point.

[juhosg: add support to 3.2 as well]

Signed-off-by: Johnathan Boyce <jon.boyce@globalreach.eu.com>

SVN-Revision: 29912
2012-01-26 17:01:41 +00:00
Gabor Juhos
038d4e0d77 ar71xx: TL-MR3020: fix board detection, fix missing mandatory package and modify LED behaviour
This patch fixes the board detection of the TL-MR3020.

The LED behaviour has also been modified:
* The WPS LED is the diag LED now.
* A netdev trigger for the LAN LED has been added.

The profile of the TL-MR3020 has been updated because the needed package
"kmod-ledtrig-usbdev" was missing which resulted in a non-working usbdev
trigger for the 3G/USB LED.

[juhosg: the board name changes has been removed, and the kernel files
has been changed instead.]

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29905
2012-01-25 07:44:45 +00:00
Gabor Juhos
c11ac55b29 ar71xx: TL-MR3020: fix GPIO polarity for button and switch
This patch fixes the GPIO polarity for the button and the sliding
switch. The buttons are not active low. "Pressed" and "Released"
events are wrong without the patch.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>

SVN-Revision: 29904
2012-01-25 07:44:43 +00:00
Gabor Juhos
095c236694 ar71xx: fix the AP/Router LED definitons on MZK-W300NH
SVN-Revision: 29897
2012-01-24 18:40:38 +00:00
Gabor Juhos
23836d5908 ar71xx: remove hardcoded MTD layout from planex files
SVN-Revision: 29895
2012-01-24 18:40:34 +00:00
Gabor Juhos
778db0a13d ar71xx: fix compiler warning if PCI is not enabled
SVN-Revision: 29869
2012-01-23 08:52:18 +00:00
Gabor Juhos
386cbfe45b ar71xx: move arch specific files to files-2.6.39
SVN-Revision: 29867
2012-01-22 22:38:11 +00:00