Commit graph

33029 commits

Author SHA1 Message Date
Felix Fietkau
bb1c915f1e kernel: update m25p80 in 4.1 to the latest version from 4.4-rc1
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47624
2015-11-24 18:59:28 +00:00
John Crispin
18691109df base-files: show hint when JFFS2-partition is full and overlayfs mounted read-only
since r45833 and r45848 the overlayfs is automatically mounted read-only
(and blocks remounts as r/w) when JFFS2 is full. see ticket #19564

because of this normal file deletion is not possible anymore.
if a user logins interactively (e.g. SSH) show a hint for this,
that files must be removed in /overlay/upper/...

v2: fix subject line

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 47623
2015-11-24 18:32:09 +00:00
John Crispin
1a092ce0e0 ar71xx: add GL-Domino Pi support V3
This is the patch for GL-Domino Pi V3. Updated against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>

SVN-Revision: 47622
2015-11-24 18:30:50 +00:00
John Crispin
a04c3e73a3 ar71xx: add GL-AR300 support V3
This is the patch for GL-AR300 V3, tested against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>

SVN-Revision: 47621
2015-11-24 18:30:19 +00:00
John Crispin
72093bd528 ar71xx: add GL-AR150 support V3
This is the 3rd version. Modified against the latest trunk.

Signed-off-by: alzhao<alzhao@gmail.com>

SVN-Revision: 47620
2015-11-24 18:29:59 +00:00
John Crispin
8c1f5141ce ralink: add support for netis WF-2881
netis WF-2881 is an MT7621AT based router with MT7602EN, MT7612EN.
It has 128MB DDR3, 128MB SLC NAND FLASH, 5-port Gbps switch and 1x USB 3.0.
The following patch adds support for this device.

this device only works on top of UBI.

Tested and working:
* ethernet
* both WiFi radios
* USB 3.0
* buttons (reset button)
* ethernet switch and USB diag LEDs
* UART
* GPIOs
* sysupgrade

Tested and not working
* failsafe

Signed-off-by: YounJae Rho <luxflow@live.com>

SVN-Revision: 47619
2015-11-24 18:29:26 +00:00
John Crispin
4223e47c19 oxnas: set irq of usb&sata to cpu1
V2:
The KD-20 also has USB 3.0.I modiy the set_irq_affinity usb 2 to set_irq_affinity ?hci_hcd 2 to bind usb 2.0&3.0 to cpu1.

Signed-off-by: Shonn Lu <countrysideboy@qq.com>

SVN-Revision: 47618
2015-11-24 18:29:14 +00:00
John Crispin
e9baf8265b ramips: add support for Youku YK1
Changes since V1:
I resend this patch for current trunk.The former V1 patch is for CC branch.

Signed-off-by: Shonn Lu <countrysideboy@qq.com>

SVN-Revision: 47617
2015-11-24 18:29:02 +00:00
John Crispin
12b6f4cf71 ramips: add second spi master sysclk
for mt7620, rt3883 and rt5350

Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47616
2015-11-24 18:28:54 +00:00
John Crispin
3afe39af72 wpa-supplicant: Get 802.11s ssid information from option mesh_id
The scripts for authsae and iw use the option mesh_id to get set the
"meshid" during a mesh join. But the script for wpad-mesh ignores the
option mesh_id and instead uses the option ssid. Unify the mesh
configuration and let the wpa_supplicant script also use the mesh_id from
the configuration.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47615
2015-11-24 18:28:44 +00:00
John Crispin
939175e9f2 authsae: Use kbit/s as mcast_rate unit like wpad
The OpenWrt wireless configuration for mcast_rate is defined as Kbit/s when
using wpa_supplicant for IBSS/802.11s and iw for unencrypted IBSS/802.11s.
But when using authsae, the unit for the same option is redefined as
Mbit/s. Better use the same unit for this option independent of the backend
which is used.

Old values for mcast_rate (< 1000) are still interpreted Mbit/s to avoid
problems during upgrades from older versions.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47614
2015-11-24 18:28:35 +00:00
John Crispin
b816d6276d authsae: Fix meshid in authsae config
The variable $mesh_id was never defined in authsae_start_interface and thus
the option meshid in $authsae_conf_file was always set to "".

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 47613
2015-11-24 18:28:19 +00:00
John Crispin
8ef96b3e6f ar71xx: Build initramfs by default for Mikrotik devices
Signed-off-by: Baptiste Jonglez <git@bitsofnetworks.org>

SVN-Revision: 47612
2015-11-24 18:28:05 +00:00
John Crispin
9a12fe8ea9 uboot-imx6: fix build with gcc-5
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47611
2015-11-24 18:27:57 +00:00
John Crispin
c7bcdac82e brcm2708: fix multi-device image generation
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47610
2015-11-24 18:27:43 +00:00
Jo-Philipp Wich
6d3901bf76 base-files: config_generate: honour port_mask property (#20963)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47609
2015-11-24 13:39:53 +00:00
Felix Fietkau
c52d6d4f45 ipq806x: another fix to the stmmac DMA configuration to fix remaining data corruption issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47603
2015-11-22 21:59:22 +00:00
Hauke Mehrtens
d56b596945 ubox: update ubox to version 2015-11-22
This version fixes a potential uncontrolled format string problem. This
makes it possible to activate the format security check.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47600
2015-11-22 21:21:09 +00:00
Hauke Mehrtens
eacf539494 mountd: update mountd to version 2015-11-22
This version fixes a potential uncontrolled format string problem. This
makes it possible to activate the format security check.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47599
2015-11-22 21:20:45 +00:00
Hauke Mehrtens
8a7f23901e fstools: update fstools to version 2015-11-22
This version fixes a potential uncontrolled format string problem. This
makes it possible to activate the format security check.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47598
2015-11-22 21:20:02 +00:00
Jo-Philipp Wich
fc64fd8712 Revert "mvebu: migrate led and network setup to board detection framework"
Roll back the mvebu conversion to board detection code as we need to fix
some strcutural issues first.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47597
2015-11-22 20:52:10 +00:00
Jo-Philipp Wich
7fc4a4581b ar71xx: fix network default config of the TEW-732BR
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47595
2015-11-22 20:00:13 +00:00
Felix Fietkau
a32f301b62 ipq806x: fix a nasty stmmac data corruption bug caused by faulty DMA initialization
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47594
2015-11-22 19:07:00 +00:00
Felix Fietkau
3789b1f5a0 ipq806x: update stmmac to the version from linux 4.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47593
2015-11-22 19:06:51 +00:00
Felix Fietkau
b1a91ca57f ath10k-firmware: add board-2.bin for qca99x0
Keep board.bin as fallback for devices without OTP that load caldata
from flash

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47592
2015-11-22 19:06:42 +00:00
Felix Fietkau
9b68fe961b build: add support for choosing a different url filename part than the output file
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47591
2015-11-22 19:06:33 +00:00
Felix Fietkau
b61e77aedd base-files: use the correct path in case of modified preinit options
If the user sets any preinit options in .config, the wrong path may get
applied due to wrong default value in image-config.in and due to Makefile
writing also the unchanged options into 00_preinit.conf

Modify the default path in image-config.in to match the current default
path set by r47080. Also modify the fall-back default in Makefile.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 47590
2015-11-22 19:06:20 +00:00
Felix Fietkau
576621f1e3 linux: add support of Synopsys ARC770-based boards
This patch introduces support of new boards with ARC cores.

 [1] Synopsys SDP board
     This is a new-generation development board from Synopsys that
     consists of base-board and CPU tile-board (which might have a real
     ASIC or FPGA with CPU image).
     It sports a lot of DesignWare peripherals like GMAC, USB, SPI, I2C
     etc and is intended to be used for early development of ARC-based
     products.

 [2] nSIM
     This is a virtual board implemented in Synopsys proprietary
     software simulator (even though available for free for open source
     community). This board has only serial port as a peripheral and so
     it is meant to be used for runtime testing which is especially
     useful during bring-up of new tools and platforms.
     What's also important ARC cores are very configurable so there're
     many variations of options like cache sizes, their line lengths,
     additional hardware blocks like multipliers, dividers etc. And this
     board could be used to make sure built software still runs on
     different HW configurations.

Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Jo-Philipp Wich <jow@openwrt.org>
Cc: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>

SVN-Revision: 47589
2015-11-22 19:06:07 +00:00
Felix Fietkau
3a0266b471 kernel: mtd: Backport GD25Q128B support to 3.18
Support is present in 3.19 and above as kernel commit:
fcc87a95195236b0935183361a72e4a98bf577d8

Changes to other existing patches are a result of "make target/linux/refresh".

Signed-off-by: Srdjan Rosic <srdjan.rosic@gmail.com>
Signed-off-by: Srdjan Rosic <rosic@google.com>

SVN-Revision: 47588
2015-11-22 19:05:53 +00:00
Hauke Mehrtens
cacf2bb33c usign: Revert r47582 "usign: activate format-security checks"
I accidentally deactivated it. This should be set to active it in any case
independently what was set in the user config.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47587
2015-11-22 14:56:17 +00:00
Hauke Mehrtens
e5ef5d7be4 iperf: activate format-security checks
This patch was taken from debian.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47586
2015-11-22 14:18:40 +00:00
Hauke Mehrtens
bd527a8d18 gettext-full: activate format-security checks
This patch was taken from upstream libcroco

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47585
2015-11-22 14:18:04 +00:00
Hauke Mehrtens
146dab8841 gettext-full: update to version 0.19.6
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47584
2015-11-22 14:17:11 +00:00
Hauke Mehrtens
f6fe072836 px5g-standalone: activate format-security checks
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47583
2015-11-22 14:16:09 +00:00
Hauke Mehrtens
312bf97cf1 usign: activate format-security checks
This still compiles with format-security checks activated.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47582
2015-11-22 14:15:34 +00:00
Hauke Mehrtens
dfd358be63 xfsprogs: activate format-security checks
This patch was taken from upstream.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47581
2015-11-22 14:13:47 +00:00
John Crispin
c550ad3d3a ramips: update dtsi files to support second spi device
Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47580
2015-11-22 11:49:13 +00:00
John Crispin
a941b34008 ramips: use transfer_one instead of transfer_one_message on rt2880 spi
* use kernel buildin transfer_one_message. we only need to implement
transfer_one and set_cs function
* should support use gpio as cs pin
* deselected the spi device when setup and add debug info
* only reset device when first driver probe

Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47579
2015-11-22 11:49:04 +00:00
John Crispin
95aa28da81 ramips: move rt2880 spi clock and reset init code to spi_prepare_message
before spi transfer. use spi_prepare_message to setup spi hardware. it
will setup MSB, spi mode and speed
remove sys_freq member and speed check code

Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47578
2015-11-22 11:48:57 +00:00
John Crispin
a58dec6275 ramips: improve rt2880 spi setup
* check clock rate, SPI mode, and word sizes
* setup spi polarity
* enable spi1 hw if need

Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47577
2015-11-22 11:48:51 +00:00
John Crispin
2ce886f149 ramips: clean up rt2880 spi probe/remove
* fill struct according to the member order
* add error clean up
* set min/max spi speed. so we don't need to check again

Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47576
2015-11-22 11:48:45 +00:00
John Crispin
bf89d139e1 ramips: improve rt2880 spi wait ready function
use loops_per_jiffy, spi clock speed and write bytes to get the
spi loop count. if loop to 0 than spi operation timeout.
remove usleep. we only write 1 byte to spi device. use busy loop
would be better.

Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47575
2015-11-22 11:48:34 +00:00
John Crispin
702c480dfe ramips: remove rt2880 spi lock and clean bit operation
Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47574
2015-11-22 11:48:21 +00:00
John Crispin
13fbd6fea7 ramips: add rt2880/mt7620 spi register defines
Signed-off-by: Michael Lee <igvtee@gmail.com>

SVN-Revision: 47573
2015-11-22 11:48:10 +00:00
John Crispin
cd9d0ee0d0 brcm2708: add device detection and use it for network, leds and preinit
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 47572
2015-11-22 08:04:37 +00:00
John Crispin
deff5fb6c8 conntrack-tools: create /etc/conntrackd directory
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 47571
2015-11-21 21:26:20 +00:00
John Crispin
b143506b17 conntrack-tools: use INSTALL_DIR once
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>

SVN-Revision: 47570
2015-11-21 21:26:12 +00:00
John Crispin
3ef6120edb tools/scons: update to 2.4.1
Update scons to 2.4.1.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 47569
2015-11-21 21:26:06 +00:00
John Crispin
9ffd80fef5 tools/cmake: update to 3.4.0
Update cmake to 3.4.0.
Refresh patches.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>

SVN-Revision: 47568
2015-11-21 21:26:02 +00:00
John Crispin
058275197b kernel/generic: 3.18, 4.y: Add support for Quectel EC20 Mini PCIe module
* both patches (qcserial/qmi_wwan) were submitted upstream[1,2]
* build tested on 3.18 and 4.1
* run tested on imx6 platform with 4.1

1. http://article.gmane.org/gmane.linux.usb.general/132998
2. http://article.gmane.org/gmane.linux.usb.general/133113

Signed-off-by: Petr Štetiar <ynezz@true.cz>

SVN-Revision: 47567
2015-11-21 21:25:54 +00:00