Commit graph

32381 commits

Author SHA1 Message Date
Felix Fietkau
92f679d3a3 uci: update to the latest version, adds various fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46738
2015-08-27 12:43:27 +00:00
Felix Fietkau
5da52afa79 hostapd: properly enable 802.11w support
Add CONFIG_IEEE80211W variable to DRIVER_MAKEOPTS so that 802.11w
support is properly compiled in full variant.

This fixes #20179

Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org>

SVN-Revision: 46737
2015-08-27 12:43:22 +00:00
Rafał Miłecki
2cd72294b6 mac80211: add pending brcmfmac patches fixing multiple interfaces
So far support for multiple interface was somehow broken in brcmfmac.
Driver couldn't correctly match firmware and system interfaces resulting
in not working APs and WARNINGs. This pending patches fixes that :)

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46734
2015-08-26 22:10:14 +00:00
Rafał Miłecki
f87990840d bcm53xx: support sysupgrade with Netgear R7000 original firmware
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46732
2015-08-26 15:21:14 +00:00
Rafał Miłecki
8f77e9f668 bcm53xx: add OpenWrt specific stuff for Netgear R7000
This adds DT things that couldn't be upstreamed yet.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46731
2015-08-26 15:21:07 +00:00
Rafał Miłecki
36a8075d90 bcm53xx: use pending Netgear R7000 patch
It includes support for LEDs and buttons.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46730
2015-08-26 14:51:47 +00:00
Rafał Miłecki
1111782e20 bcm53xx: use backported patches for UART0 and profiling
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46729
2015-08-26 14:39:06 +00:00
Jonas Gorski
05a3cdd71f brcm63xx: fix WAP-5813n default network config
/etc/uci-defaults/02_network had a typo, making it generate the wrong
network config.

Closes #20407.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46727
2015-08-26 13:03:09 +00:00
Jonas Gorski
a486ffacea linux: fix off-by-one in handling in /proc/net/route
Add an upstream fix for /proc/net/route causing missing routes doing
several continued reads from it.

Only 4.1+ is affected.

Closes #20403.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46726
2015-08-26 10:11:41 +00:00
Jonas Gorski
77a70a0716 brcm63xx: enable dual rx/tx spi support for hsspi
should improve flash access times. Should be harmless to gnerally
enable regardless if a flash supporting dual reads is attached. In
doubt, spi-nor will just fall back to serial reads.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46725
2015-08-25 22:04:53 +00:00
Rafał Miłecki
7a68c31a81 mac80211: backport latest patches except for NVRAM support
We sill don't use kernel 4.2 which is required for backporting using
upstream NVRAM support patch.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46724
2015-08-25 15:20:48 +00:00
Felix Fietkau
13a095085e scripts/patch-kernel.sh: remove -E flag to preserve empty files touched by patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46723
2015-08-25 07:46:32 +00:00
Felix Fietkau
59bffdaa64 rules.mk: remove GCC 4.4 and GCC 4.5 conditional
gcc 4.4 was removed in r44957 gcc: remove 4.4.7 (only used by avr32)
gcc 4.5 was removed in r36149

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46722
2015-08-25 07:45:42 +00:00
Felix Fietkau
ddf8858cea kernel: bridge, multicast-to-unicast: assign src after pskb_may_pull()
A call to pskb_may_pull() might reallocate skb->data. Therefore we
should only assign the src-pointer after any potential reallocations.

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46721
2015-08-25 07:25:20 +00:00
Felix Fietkau
ea9963bb21 Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"
This reverts commit a080e8e1943156168913d0353a2e99d1151102aa.

It did not fix the problem but just hid some symptom. The real issue was
that IGMP/MLD report suppression was not considered for the
multicast-to-unicast feature. A recent netifd which isolates IGMP/MLD
reports between STAs by utilizing AP-isolation and bridge-hairpinning
should have fixed this.

It is perfectly fine to apply multicast-to-unicast to IPv6 Neighbor
Solicitations, too (once that feature is configured correctly).

Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46720
2015-08-25 07:25:10 +00:00
Felix Fietkau
d4e9c8d7ef netifd: update to the latest version, adds multicast-to-unicast fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46719
2015-08-25 07:24:53 +00:00
Steven Barth
9f67c7fc8a netifd: various updates
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46718
2015-08-25 06:27:37 +00:00
Steven Barth
ab71e84084 omcproxy: fix last commit
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46717
2015-08-24 08:53:16 +00:00
Steven Barth
e81f860bca omcproxy: add new igmpv3 & mldv2 multicast proxy
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46716
2015-08-24 08:28:11 +00:00
Jonas Gorski
2d53e22357 kernel: remove already upstream applied patch
Remove 131-MIPS-export-get_c0_perfcount_int.patch which was already applied
in 4.1.6. This fixes the following build error:

arch/mips/ath79/setup.c:217:77: error: redefinition of '__kstrtab_get_c0_perfcount_int'
arch/mips/ath79/setup.c:211:77: note: previous definition of '__kstrtab_get_c0_perfcount_int' was here
arch/mips/ath79/setup.c:217:350: error: redefinition of '__ksymtab_get_c0_perfcount_int'
arch/mips/ath79/setup.c:211:350: note: previous definition of '__ksymtab_get_c0_perfcount_int' was here
scripts/Makefile.build:258: recipe for target 'arch/mips/ath79/setup.o' failed

Reported-by: swalker
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46715
2015-08-23 21:33:57 +00:00
Jonas Gorski
548630d74e adm5120: make patches apply again
Fix patches not applying anymore since r46654.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46714
2015-08-23 19:11:07 +00:00
Jonas Gorski
2d379e796f kernel: update 4.1 to 4.1.6
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.6

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46713
2015-08-23 18:06:11 +00:00
Jonas Gorski
2190f090bb mvebu: kirkwood: fix ehci-orion probe if generic-phy isn't enabled
Properly treat -ENOSYS as no PHY, else ehci-orion won't work without
generic phy support.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46711
2015-08-23 13:35:03 +00:00
Jonas Gorski
ecfd245133 mac80211: disable ipw2x00 for big endian targets
The ipw2x00 drivers assume that the system they are running is little
endian, and access everything in native byte order. When run on a big
endian system, everything breaks apart.

Since fixing this is non trivial on a first glance, disable them for
big endian targets.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46708
2015-08-23 09:36:03 +00:00
Jonas Gorski
ecdce239a5 brcm63xx: ensure dummy byte is set for mapped spi flash with fast read
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly
set.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46707
2015-08-23 09:35:56 +00:00
Jonas Gorski
0d54d44349 scripts/feeds: allow export of feeds with static revisions
Add a switch to scripts/feeds that allows listing the feeds with their
currently checked out revisions in feeds.conf compatible format.

This allows providing a feeds.conf for public builds to make replication
of the build easier.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46706
2015-08-23 09:35:46 +00:00
Zoltan Herpai
e0d332cdbe sunxi: bump to 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46705
2015-08-21 13:23:29 +00:00
Zoltan Herpai
79e1aa2ac3 sunxi: add audio module for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46704
2015-08-21 13:16:11 +00:00
Zoltan Herpai
ed1a7a2deb sunxi: update ahci package list for a couple board profiles
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46703
2015-08-21 10:16:15 +00:00
Zoltan Herpai
c00198216a sunxi: reorganize kmod-ata-sunxi dependencies
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 46702
2015-08-21 10:08:07 +00:00
Zoltan Herpai
fdf3c6bf6e Newer kernels make use of libahci in ahci-platform, ie. also on non-PCI platforms. As there is no single config symbol deciding whether libahci.ko is being built or not it seems the most sensitive thing to package it in kmod-ata-core.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 46701
2015-08-21 09:48:05 +00:00
Imre Kaloz
87a70e0774 This had been set in r44508 as a workaround for switch problems.
Now that the switch driver can handle two devices with
the same MAC address in separate VLANs we can go back
to using the same address on both interfaces.

This is the Linksys firmware's default behavior.

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46700
2015-08-21 08:10:48 +00:00
Imre Kaloz
9cca6c5ad9 Previously, all VLANs (port-based or 802.1q) were sharing a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1).
This also clears any bootloader-set FDB defaults. This had
caused issues creating port-based VLANs when mappings
overlapped previous VLANs. Packets destined to a port
not in the default port group flooded all ports.

Tested on a 88E6171 (Linksys EA4500) and 88E6172 ('1900AC)

Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46699
2015-08-21 08:09:52 +00:00
Imre Kaloz
f57484c4af mvebu: fix cobra chainmask
Thanks Sebastian for spotting it.

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46697
2015-08-21 08:01:48 +00:00
Zoltan Herpai
f5fcb0b4b8 kernel: add missing symbols for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 46696
2015-08-20 23:19:42 +00:00
Steven Barth
c154130ebd odhcpd: various RA improvements
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46694
2015-08-20 12:43:45 +00:00
Imre Kaloz
d55a4a9e5f mwlwifi: fix commit hash for 10.3.0.8
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46693
2015-08-19 08:45:19 +00:00
Imre Kaloz
20fac016e4 mvebu: add support for the Linksys boot counter
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46690
2015-08-19 08:31:23 +00:00
Imre Kaloz
996399ba08 uhttpd: we don't know where the device is located, so reflect that in the cert
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46688
2015-08-19 08:20:11 +00:00
Imre Kaloz
58de65acb0 mwlwifi: upgrade to 10.3.0.8-20150818
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 46687
2015-08-18 11:22:47 +00:00
Steven Barth
ed53726072 enable strong SSP / Stackprotector on gcc5
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46685
2015-08-18 09:20:34 +00:00
Steven Barth
a6dc587cf6 musl: fix getsubopt function
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46684
2015-08-18 09:18:40 +00:00
Steven Barth
bef52af66f polarssl: Fix build failures due to PKG_NAME != dir name
Packages that depend on PolarSSL fail to build because polarssl's InstallDev
section never actually gets executed because (prior to this patch) the package
name does not match the subdir the package is in (presumably due to upstream
name change).  As a workaround I have changed the package name back to
polarssl and used a new variable SRC_PKG_NAME for the purposes of downloading
the upstream tarball and creating PKG_BUILD_DIR.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>

SVN-Revision: 46683
2015-08-18 08:37:38 +00:00
Hauke Mehrtens
4d85dd6a8f mac80211: add mt7601u driver
firmware is not available in linux-firmware yet
so use official driver source

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46682
2015-08-17 21:19:27 +00:00
Jo-Philipp Wich
241d151b9c uhttpd: pass X-HTTP-Method-Override header to cgi scripts
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 46677
2015-08-17 16:17:36 +00:00
John Crispin
0ff8c94aab at91: fix usb rate backport patch tab mangle
The patch submitted in [46649] was mangled in the use of gmails webmail interface, tabs replaced with spaces, resulting in a patch which dit not apply.
This should fix the issue, sorry for the noise.

Signed-off-by: Ben Whitten <benwhitten@gmail.com>

SVN-Revision: 46676
2015-08-17 16:10:49 +00:00
John Crispin
8411858194 orion: remove IRQF_DISABLED
no-op since 2.6.35
    removed in Kernel 4.1
    see https://lwn.net/Articles/380931/

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46672
2015-08-17 11:26:14 +00:00
John Crispin
6d461ddbb2 generic: crypto: remove IRQF_DISABLED
no-op since 2.6.35
    removed in Kernel 4.1
    see https://lwn.net/Articles/380931/

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46671
2015-08-17 11:26:02 +00:00
John Crispin
4582d7e8f5 lantiq: Support newer versions of the PEF7071 ethernet PHYs
The BT Home Hub 5A uses three PEF7071 with PHY ID 0xd565a401. Daniel's
PHY driver (for his u-boot sources) already supports that PHY because
it uses a PHY ID mask of 0xfffffff8.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46670
2015-08-17 11:25:57 +00:00
John Crispin
eb42485093 iwinfo: update to latest git HEAD
adds extra station info reporting

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46669
2015-08-17 11:25:51 +00:00