Commit graph

32002 commits

Author SHA1 Message Date
Felix Fietkau
240cff7d6a Revert "ar71xx: Allow to use ath79_gpio_output_select on QCA955x" (r46240)
It breaks the build

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46256
2015-07-07 22:44:28 +00:00
Steven Barth
37c015fe25 scripts/feeds: print the source of packages installed
Can be helpful in diagnosing unexpected package overlaps between
feeds/core.

Signed-off-by: Karl Palsson <karlp@remake.is>

SVN-Revision: 46255
2015-07-07 22:32:38 +00:00
Felix Fietkau
1ef0bc6bfb mwlwifi: fix compile error after mac80211 update
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 46254
2015-07-07 22:07:22 +00:00
Rafał Miłecki
4014ba376c Revert "Revert "nvram: increase NVRAM size to 64 KiB""
This reverts commit r45579.

With the latest change r46251 ("nvram: fix "Segmentation fault" caused
by setting memory out of buffer") nvram utility shouldn't crash anymore.

It was tested on 3 brcm47xx devices:
1) Unknown with 0x10000 NVRAM size (0x8000 offset)
2) Linksys E1000 V2.1 with 0x10000 (0x8000 offset)
3) Linksys WRT300N V1 with 0x10000 (0x8000 offset)

And 3 bcm53xx devices:
1) Buffalo WZR-600DHP2 with 0x160000 NVRAM size
2) Buffalo WZR-1750DHP with 0x10000 NVRAM size
3) Netgear R6250 V1 with 0x180000 NVRAM size
(all using 0 offset)

This is an important change as it allows reading whole NVRAM. This may
critical when reading some basic configuration (e.g. switch ports).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46253
2015-07-07 22:06:04 +00:00
Rafał Miłecki
9f15849910 nvram: fix "Segmentation fault" caused by setting memory out of buffer
Some MTD partitions with NVRAM have content starting in the middle. In
such case offset is set and nvram_header returns pointer to the middle.
It means we have to respect offset when calculating remaining space.

By the way use real MTD partition size (nvram_part_size variable) as we
may want to bump NVRAM_SPACE in the (very near) future.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46251
2015-07-07 21:21:49 +00:00
John Crispin
08790c5ee8 ar71xx: Add support for Cisco-Linksys WAP4410N
This patch adds support for the Cisco WAP4410N, an access point that uses the
AR9132 SoC. Web upgrades from stock are not yet possible, UART access required
for the initial flash.

Signed-off-by: Ryan A Young <rayoung@utexas.edu>

SVN-Revision: 46250
2015-07-07 18:06:39 +00:00
Steven Barth
e71141ef23 gdb: fix compilation for x86_64 with musl
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 46249
2015-07-07 17:30:08 +00:00
John Crispin
d535218230 ar71xx: add support for D-Link DIR-615 rev. Ix board
Based on trunk r46212.

Signed-off-by: Jaehoon You <teslamint@gmail.com>

SVN-Revision: 46248
2015-07-07 13:48:39 +00:00
John Crispin
8f0e96ee11 mips: Free memory when load_module fails (#14453)
The mips reloc patch introduced new allocations which were done before
add_unformed_module but never freed them in case of an error. A new hook in
Linux 3.19 called module_arch_freeing_init can be used for freeing memory
which were allocated during this init phase.

The problem can be seen when trying to load a module (via busybox insmod)
when it was already loaded.

    free -m
    for i in `seq 1 100`; do
        /sbin/insmod /lib/modules/*/ath9k.ko >& /dev/null
    done
    free -m

This simple loop would leak ~3.2 MB.

Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46247
2015-07-07 13:48:27 +00:00
John Crispin
7ab6409a89 ubus: bump to latest git HEAD
fixes a bug where gid was checked twice instead of the uid/gid combo

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46246
2015-07-07 13:48:17 +00:00
John Crispin
cb52ede81d mac80211: Drop ath10k workaround for providing calibration data
Ath10k has now a proper method of providing calibration data via
the kernel firmware API. This patch can be dropped as all boards
now use the proper method.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 46245
2015-07-07 13:48:06 +00:00
John Crispin
f3bdc4a76a ar71xx: Unify ath10k calibration data loading
Currently one board uses the "proper" way of providing firmware
with the name ath10k/cal-pci-<pci address>.bin, whereas other
boards patch board.bin template in preinit and rely on a custom
ath10k patch to use calibration data from the template.

This patch makes all boards use the first method.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 46244
2015-07-07 13:47:57 +00:00
John Crispin
aab3ecdfd8 mac80211: ath9k: fix qca956x name also
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 46243
2015-07-07 13:47:51 +00:00
John Crispin
81a7f0382f kernel: move wpan to separate menu
bluetooth is separate from 802.11 entries too

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>

SVN-Revision: 46242
2015-07-07 13:47:45 +00:00
John Crispin
f7ffbbc5fc ar71xx: Use *_eth_cfg helper for Open Mesh MR900 boards
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46241
2015-07-07 13:47:39 +00:00
John Crispin
a4f941b0e4 ar71xx: Allow to use ath79_gpio_output_select on QCA955x
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46240
2015-07-07 13:47:30 +00:00
John Crispin
3787c32183 sysctl: read settings from /etc/sysctl.d/*.conf
This changes makes it possible to store custom settings
in individual files inside the directory /etc/sysctl.d/.

Signed-off-by: Stefan Tomanek <stefan.tomanek+openwrt@wertarbyte.de>

SVN-Revision: 46239
2015-07-07 13:47:23 +00:00
John Crispin
0e2d9769be ar71xx: add support for TL-WR741ND v5
This device is identical to the TL-WR740N v5, it even uses the same HWID (which
wasn't the case for older TL-WR741ND revisions).

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 46238
2015-07-07 13:47:17 +00:00
John Crispin
8fa677d7b0 generic: mtd backport for Spansion S25FL164K
Backport for the Spansion S25FL164K
It's a 8 MiB flash chip with 4 KiB erase sectors.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 46237
2015-07-07 13:47:08 +00:00
John Crispin
055663201b ar71xx: Add Support for the Bitmain Antminer S3
This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner

http://wiki.openwrt.org/toh/bitmain/s3

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 46236
2015-07-07 13:46:54 +00:00
John Crispin
9f2b8b3902 ar71xx: allow pci calibration fixup to work with ar9344
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 46235
2015-07-07 13:46:44 +00:00
John Crispin
6fc2e94120 ar71xx: add support for ubnt rocket-m ti
rocket-m titanium is a device based on ar9344 with 802.11af poe.
It doesn't use the SoC wifi, instead it's using an ar9280 connected to
the pci bus. The gps version of the rocket-m ti is working, but
gps is untested. The gps is connected to the first serial port.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 46234
2015-07-07 13:46:38 +00:00
John Crispin
f8eaad100b x86/xen_domu: enable image generation
Add features ext4 targz to target x86/xen_domu in order to
generate images in defconfig.

This fixes #18074.

Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>

SVN-Revision: 46233
2015-07-07 13:46:26 +00:00
John Crispin
5da98f3478 swconfig: swlib.c: free name and description of attributes
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 46232
2015-07-07 13:46:16 +00:00
John Crispin
294907aa3a swconfig: swlib.c: free portmaps in swlib_free()
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 46231
2015-07-07 13:46:05 +00:00
John Crispin
2b9bdf4d6f swconfig: swlib.c: remove const qualifier for val.s since this is supposed to be free'd
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 46230
2015-07-07 13:45:56 +00:00
John Crispin
08d4d4921d swconfig: swlib.c: free device name and alias
Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>

SVN-Revision: 46229
2015-07-07 13:45:44 +00:00
John Crispin
404e599933 ar71xx: Enable sysupgrade on the Bitmain Antminer S1
This patch enables sysupgrade for the Bitmain Antminer S1

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 46228
2015-07-07 13:45:37 +00:00
John Crispin
5740cf684c ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.
The designated blue WAN port on both devices has index 5, not 1.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

SVN-Revision: 46227
2015-07-07 13:45:30 +00:00
John Crispin
6a374f0062 ar71xx: add LED defaults for the EnGenius EPG5000
NB that wlan5g is phy0tpt and wlan2g phy1tpt.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

SVN-Revision: 46226
2015-07-07 13:45:20 +00:00
John Crispin
8a843b7b77 uboot-lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
uboot-lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)

Signed-off-by: Jannis Pinter <jannis@pinterjann.is>

SVN-Revision: 46225
2015-07-07 13:45:10 +00:00
John Crispin
b9963bbe80 lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)

Signed-off-by: Jannis Pinter <jannis@pinterjann.is>

SVN-Revision: 46224
2015-07-07 13:44:58 +00:00
John Crispin
6bdd209f15 lantiq: Add support for the BT Home Hub 5A
u-boot support depends on the next "upstream" version ([0]) from
Daniel Schwierzeck.
Since the installation process is quite complicated a "how to" was
added to the wiki: [1]

[0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next
[1] http://wiki.openwrt.org/toh/bt/homehub_v5a

V2: Use the correct PCI interrupt (fixes 2.4GHz wifi)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46223
2015-07-07 13:44:53 +00:00
John Crispin
2748df1c98 lantiq: Silence the printk when a PCIe error interrupt arrives
Basically the only error I am seeing is "Correctable Error". Also newer
lantiq PCIe drivers have this message wrapped in a "if debug enabled"
block. So it should be safe to disable this warning.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46222
2015-07-07 13:44:37 +00:00
John Crispin
415fe71d00 lantiq: Make the MEI address available for kernel drivers
Newer DSL driver versions depend on the address information.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46221
2015-07-07 13:44:32 +00:00
John Crispin
b9463ce786 generic: Allow configuring an increment with mtd-mac-address
This is useful if the device also has an ethernet WAN interface with a
separate mac address (that is derived from the LAN mac address).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46220
2015-07-07 13:44:27 +00:00
John Crispin
fa9e259729 lantiq: Change the data-type of mac address in ETOP driver
Make it consistent with the net_device struct and the xrx200 driver

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46219
2015-07-07 13:44:12 +00:00
John Crispin
4c8227539e lantiq: Make ATM and PTM drivers compatible with kernel 4.1
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46218
2015-07-07 13:44:04 +00:00
John Crispin
243d347a6d lantiq: Make ltq-ifxos compile with kernel 4.1
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46217
2015-07-07 13:43:54 +00:00
John Crispin
ff08b09570 lantiq: Add support for linux 4.1
All (still relevant) patches were refresh.
The following patches were dropped because they are applied upstream:
- 0003-MIPS-lantiq-handle-vmmc-memory-reservation.patch
- 0005-MIPS-lantiq-add-reset-controller-api-support.patch
- 0006-MIPS-lantiq-reboot-gphy-on-restart.patch
- 0009-MIPS-lantiq-command-line-work-around.patch
- 0010-MIPS-lantiq-export-soc-type.patch
- 0011-lantiq-add-support-for-xrx200-firmware-depending-on-.patch
- 0037-MIPS-lantiq-move-eiu-init-after-irq_domain-register.patch

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46216
2015-07-07 13:43:47 +00:00
John Crispin
2658b33f68 ramips: a5-v11 board fix power led blinking at boot
Signed-off-by: Konrad Kotowicz <skoti1@go2.pl>

SVN-Revision: 46215
2015-07-07 13:43:37 +00:00
John Crispin
d08209a1c5 ramips: fix typo in WHR1166D mtd size variable
Fix typo in WHR1166D mtd size variable

Signed-off-by: Lorenzo Bianconi <lorenzo.bianconi83@gmail.com>

SVN-Revision: 46214
2015-07-07 13:43:28 +00:00
Rafał Miłecki
9206a90a74 procd: update to the latest version, fix stdout logging
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 46212
2015-07-07 10:22:25 +00:00
Steven Barth
59f5eefe8c dnsmasq: Add sequential_ip UCI parameter
When enabled the dnsmasq DHCP server allocates the IP addresses sequentially
starting from the lowest available IP address.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 46211
2015-07-07 08:13:22 +00:00
Steven Barth
c5c819c494 dnsmasq: enable extra tracing by default when UCI parameter logqueries is set
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>

SVN-Revision: 46210
2015-07-07 08:13:16 +00:00
Felix Fietkau
eaf33c36bf mac80211: update regulatory database to master-2015-06-05
Signed-off-by: Petko Bordjukov <bordjukov@gmail.com>

SVN-Revision: 46209
2015-07-07 08:06:10 +00:00
Felix Fietkau
b26077026f ar71xx: add support for ap143
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>

SVN-Revision: 46208
2015-07-07 08:06:05 +00:00
Felix Fietkau
c9e433206f ar71xx: rework patch for qca953x/956x
Patch cherry-picked from the following location:
https://www.codeaurora.org/cgit/quic/qsdk/oss/system/openwrt/commit/?h=release/coconut_ioe4531_2.0&id=5c357bf6c763e4140dddcc9a3bc5f005525a9c0e

Changelist,
    - add more register defines
    - add EHCI support
    - fix GPIO pin count to 18
    - fix chained irq disabled
    - fix GMAC0/GMAC1 initial
    - fix WMAC irq number to 47
    - merge the changes of dev-eth.c from the patch to file.

Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 46207
2015-07-07 08:05:55 +00:00
Felix Fietkau
7acbd52055 ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND v9, Compex WPJ531)
The initialization routines for these boards were relying on some (wrong)
defaults for the QCA953x ethernet. Make these defaults explicit to prevent
breaking them when the QCA953x defaults are fixed.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 46206
2015-07-07 08:05:50 +00:00
Hauke Mehrtens
6097f550e0 mac80211: fix compile warning in rt2800lib.c
reorder some parts of the patch to remove the declaration-after-
statement warning.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 46205
2015-07-06 21:43:48 +00:00