ar71xx: fix ethernet initialization on QCA953x-based boards (TP-Link TL-WR841N/ND v9, Compex WPJ531)
The initialization routines for these boards were relying on some (wrong) defaults for the QCA953x ethernet. Make these defaults explicit to prevent breaking them when the QCA953x defaults are fixed. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> SVN-Revision: 46206
This commit is contained in:
parent
6097f550e0
commit
7acbd52055
2 changed files with 13 additions and 0 deletions
|
@ -109,12 +109,18 @@ static void __init tl_ap143_setup(void)
|
|||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
/* LAN */
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
ath79_switch_data.phy_poll_mask |= BIT(4);
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 0);
|
||||
ath79_register_eth(1);
|
||||
|
||||
/* WAN */
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth0_data.speed = SPEED_100;
|
||||
ath79_eth0_data.phy_mask = BIT(4);
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 1);
|
||||
ath79_register_eth(0);
|
||||
|
||||
|
|
|
@ -105,12 +105,19 @@ static void __init common_setup(void)
|
|||
ath79_register_mdio(0, 0x0);
|
||||
|
||||
/* LAN */
|
||||
ath79_eth0_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth0_data.speed = SPEED_100;
|
||||
ath79_eth0_data.phy_mask = BIT(4);
|
||||
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
|
||||
ath79_register_eth(0);
|
||||
|
||||
/* WAN */
|
||||
ath79_switch_data.phy4_mii_en = 1;
|
||||
ath79_eth1_data.duplex = DUPLEX_FULL;
|
||||
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
||||
ath79_eth1_data.speed = SPEED_100;
|
||||
ath79_switch_data.phy_poll_mask |= BIT(4);
|
||||
ath79_init_mac(ath79_eth1_data.mac_addr, mac, 1);
|
||||
ath79_register_eth(1);
|
||||
|
||||
|
|
Loading…
Reference in a new issue