Commit graph

17032 commits

Author SHA1 Message Date
Rafał Miłecki
18152e71d8 brcm47xx: mips74k: specify DEVICE_PACKAGES for all devices
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-04 09:36:34 +01:00
Rafał Miłecki
1d74f78877 brcm47xx: legacy: specify DEVICE_PACKAGES for all devices
This allows more feature complete images. Of course it affect the size,
e.g. enabling b43 bumped rootfs from 1569618 to 2029122 for me.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-01-04 09:35:46 +01:00
Victor Shyba
e2f866d63a generic: mtd: add lock/unlock support for f25l32pa
This chip has write protection enabled on power-up, so this flag is
necessary to support write operations.

Signed-off-by: Victor Shyba <victor1984@riseup.net>
2017-01-03 20:09:41 +01:00
Victor Shyba
d6c831e0e5 generic: mtd: backport SPI_NOR_HAS_LOCK
This flag was added to 4.9 with upstream commit
76a4707de5e18dc32d9cb4e990686140c5664a15.

Signed-off-by: Victor Shyba <victor1984@riseup.net>
[refresh and adjust platform patches, fix commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-03 19:58:00 +01:00
Yutang Jiang
799d0dddf6 layerscape: add ls2088ardb device support
The QorIQ LS2088A processor is built on the Layerscape
architecture combining eight ARM A72 processor cores
with advanced, high-performance datapath acceleration
and network, peripheral interfaces required for
networking, telecom, wireless infrastructure, aerospace
applications and general-purpose embedded applications.

Features summary:
- Eight 64-bit ARM v8 Cortex-A72 CPUs
- Two 64-bit DDR4 SDRAM memory controller with ECC
- One 32-bit DDR3 SDRAM memory controller with ECC
- Data path acceleration architecture 2.0 (DPAA2)
- Ethernet interfaces
- IFC, 4 PCIe, 2 SATA, 2 USB, 1 SDXC, 2 DUARTs etc

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2017-01-03 15:19:15 +01:00
Yutang Jiang
1866368a8a layerscape: add ls1088ardb device support
LS1088A is an ARMv8 implementation combining eight ARM A53 processor
cores. The LS1088ARDB is an evaluatoin platform that supports the
LS1088A family SoCs.

Features summary:
- Eight 64-bit ARM v8 Cortex-A53 CPUs
- Data path acceleration architecture 2.0 (DPAA2)
- Ethernet interfaces
- QUADSPI flash, 3 PCIe, 2 USB, 1 SD, 2 DUARTs etc

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2017-01-03 15:19:15 +01:00
John Crispin
91dab05918 ixp4xx: drop 3.18 config/patches
the default has been 4.4 for a while now

Signed-off-by: John Crispin <john@phrozen.org>
2017-01-02 21:06:13 +01:00
Mathias Kresin
b35a41c139 generic: backport dwc2 kernel panic fix
In case the soft reset in dwc2_core_reset() timeouts, the
hsotg->core_params are freed albeit it is owned by the core. This
results into a kernel panic as shown in FS#351.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
L. D. Pinney
b28e94d4bf ramips: MiWiFi Nano fixes
Use the the dt-bindings macros and add the reset button.

Set the correct polarity for the LEDs and drop the default state.
Remove all trigger for the LEDs. According to the manual the LEDs are
only used to show the operation state, where blue means normal
operation.

Use the MAC-Addresses stored in EEPROM for the ethernet and the
wireless interface.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
[use leds only for boot status indication, add proper commit message]
Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
Hauke Mehrtens
321aca6661 oxnas: fix syntax in ox820-akitio.dts
This commit introduced a syntax error in ox820-akitio.dts which is
fixed now:
commit 5cde94d9ab
Author: Daniel Golle <daniel@makrotopia.org>
Date:   Sat Sep 24 01:14:53 2016 +0200
    oxnas: backport upstream NAND driver

This caused the folowing error message in the build bot:
Error: arch/arm/boot/dts/ox820-akitio.dts:146.3-147.1 syntax error
FATAL ERROR: Unable to parse input tree
scripts/Makefile.lib:293: recipe for target 'arch/arm/boot/dts/ox820-akitio.dtb' failed
make[5]: *** [arch/arm/boot/dts/ox820-akitio.dtb] Error 1

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-01-02 13:34:57 +01:00
Daniel Golle
3e2c60e476 oxnas: append metadata to sysupgrade image
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-01 10:08:04 +01:00
Daniel Golle
5cde94d9ab oxnas: backport upstream NAND driver
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-01 10:07:58 +01:00
Daniel Golle
ae21033e76 oxnas: drop support for kernel 4.1
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-01 10:07:40 +01:00
Daniel Golle
1f7a3584e5 oxnas: switch to kernel 4.4
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2017-01-01 10:07:05 +01:00
Felix Fietkau
4731f02fa2 kirkwood: fix ubi partition name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-30 12:58:20 +01:00
Felix Fietkau
83d59453c0 kirkwood: fix sysupgrade for non-dockstar NAND devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-30 12:58:20 +01:00
Rafał Miłecki
8f5cf323c4 brcm47xx: drop standalone Netgear WGT634U profile
We have profile for this device thanks to DEVICE_PACKAGES now.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Russell Senior <russell@personaltelco.net>
2016-12-30 09:23:07 +01:00
Rafał Miłecki
b1bdb6e5ea brcm47xx: specify DEVICE_PACKAGES for Netgear WGT634U
This allows using it nicely with PER_DEVICE_ROOTFS.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Cc: Russell Senior <russell@personaltelco.net>
2016-12-30 09:22:55 +01:00
Rafał Miłecki
c5ca3043d1 bcm53xx: drop unused source file of bcm53xxspiflash
We don't use this driver since commit 741715331a ("bcm53xx: switch to
m25p80 and drop bcm53xxspiflash").

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-29 18:07:01 +01:00
Rafał Miłecki
ef4fc00c91 brcm47xx: mips74k: fix typo in Netgear WN3000RP model name
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-29 09:41:00 +01:00
Rafał Miłecki
939ef157da ramips: fix NixcoreX1 profiles
There was a typo in Makefile that prevented using these profiles.

Fixes: a75ce960ac ("ramips: use different board names for variants")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-28 23:05:24 +01:00
Sven Roederer
19059d84a4 linux: correct deps for x86-xen-domu target
depending packages have been moved to kernel-config
- kmod-xen-kbddev in 9fde361
- kmod-xen-fs, kmod-xen-evtchn, kmod-xen-netdev in 018807d

this will also fix imagebuilder

Signed-off-by: Sven Roederer <devel-sven@geroedel.de>
2016-12-28 10:35:02 +01:00
Felix Fietkau
9c402d03e6 kirkwood: enable initramfs images by default
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-27 12:52:18 +01:00
Hauke Mehrtens
2e101b5e66 ppc44x: fix build of crypto4xx_core.c
crypto4xx_probe() is in the __init section and referenced by code form
other sections, which causes a build error. Backport a patch from
mainline kernel to fix this.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-12-25 15:19:20 +01:00
John Crispin
9998bc5ef7 lantiq: fix falcon build
The following commit changed the build templates name but forgot to
update the TARGET_DEVICES variable properly.

commit f9226158be (lantiq: rename EASY98000 to EASY98000NOR)

Signed-off-by: John Crispin <john@phrozen.org>
2016-12-25 09:52:11 +01:00
Hauke Mehrtens
f9226158be lantiq: rename EASY98000 to EASY98000NOR
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-12-24 14:55:45 +01:00
Felix Fietkau
41b63b50d1 rb532: remove linux 4.1 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 12:02:11 +01:00
Florian Fainelli
b69314ea99 rb532: Switch to kernel 4.4
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-24 12:02:10 +01:00
Florian Fainelli
002264d5b1 rb532: Backport fix to resolve oops during korina_restart
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-24 12:02:10 +01:00
Florian Fainelli
7a340a5cd0 rb532: Add support for kernel 4.4
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-24 12:02:10 +01:00
Florian Fainelli
db553ffb34 rb532: Fix initramfs kernel images
The generic lzma-loader uses vmlinux.lzma as an input to compress so we
need to provide a lzma compressed version of the initramfs kernel.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-24 12:02:10 +01:00
Mathias Kresin
ea9b71e5b1 lantiq: drop the FRITZ7360SL led-dsl alias
The power LED can not be used for indicating the xDSL line state and
the in system (boot) state at the same time in LEDE.  As soon as the
xDSL Line goes down, the power LED is switched off.

During xDSL handshake the power led would blink with the same or a
similar pattern as during boot.

Both might confuse users.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin
7dd42d610d lantiq: add FRITZ7360SL phy reset gpios
Due to a hardware bug of Atheros 8030 phys, the driver need to reset
the phys on link state change.

Use the correct compatible string for the at903x phys connected to
switch port 0 and 1.

Fix the pinmux of the gpio lines connected to the reset pin of the phys
and define the reset-pins to let the driver do the fixups.

Fixes FS#343

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin
9aa420b00e lantiq: fix DGN1000B boot status leds
The alias node should not be a child of the chosen node.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin
0cf581ca3a ramips: use new image build code for more devices
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin
a75ce960ac ramips: use different board names for variants
Use different names for flash size related board variants, to make sure
that only images for the actual flash size are considered as valid by
the image validation code.

Remove the flash size suffix from the string returned by
ramips_board_detect() to ensure that existing scripts relying on the
former used boardname are still working.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin
29f5e643ad ramips: sort rt305x image file alphabetical
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin
d2b1148e75 ramips: use D-Link DIR-600 B1 image for B2 version
Everything set for the B1 is identical to the values uses for the B2
version.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin
d2b6bf1416 ramips: fix image validation errors
The name from the Device define will be used in the metadata. Due to
typos/different spelling, this name might not match the one exported in
/lib/ramips.sh.

Fix all name mismatches which were found by checking if the name used
in the metadata exists in /lib/ramips.sh.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Mathias Kresin
ae3ac76e56 ramips: use destinct 11AC NAS board name
Use a distinct board name even if the board is near to identical to
the WeVO W2914NS v2.

To make sure that a 11AC NAS image can not be installed on a
WeVO W2914NS v2, both board need to use different names.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-24 10:03:38 +01:00
Felix Fietkau
a18488a0aa orion: remove linux 3.18 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau
0d5ba94088 orion: enable SoC drivers in the kernel config
Clean up packaged modules

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau
49e81f9fe4 kirkwood: clean up profiles, move to image makefile
Adds support for per-device rootfs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau
9a1f441ac8 kirkwood: enable SoC drivers in the kernel config
Clean up packaged modules

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau
44447f6882 kirkwood: clean up FEATURES
Remove dt: it is implicitly enabled based on the kernel config
Remove tar.gz and jffs2_nand: Legacy build code has been removed,
NAND devices are only supported with UBI now.
Remove ubifs: deprecated, use squashfs images instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau
2eb1cc3dfc kirkwood: remove legacy image build code
This has been mostly non-functional for a while now

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Felix Fietkau
c9e4cf2299 kirkwood: convert iconnect, ib62x0 and pogoplug_e02 to the new image build code
Update the correspoding u-boot configs to stop relying on
kernel-in-rootfs, which was removed a while back

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-24 09:40:46 +01:00
Henryk Heisig
4f033b2da6 ramips: fix tplink image building fix sysupgrade firmware on MR200
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-12-24 06:52:12 +01:00
Henryk Heisig
3a6353d910 ramips: enablemodem: move /lib/ramips.sh to start()
Fix build error: /etc/init.d/enablemodem: line 2: /lib/ramips.sh: No such file or directory

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-12-24 06:51:59 +01:00
Jo-Philipp Wich
29cc927ef5 generic: ar8216: fix invalid bounds check imported from ChromeOS (FS#347)
The priv->vlan_id member is of size AR8X16_MAX_VLANS, not AR8X16_MAX_PORTS,
so check for the proper maximum value in order to avoid capping valid VLAN IDs
to 7 (AR8X16_MAX_PORTS - 1).

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-23 19:24:14 +01:00
Felix Fietkau
d44c6ec1ce Revert "arm64: boot-wrapper: Add mirror"
This reverts commit ef258a0a41.
Similar to 43c09f2885, multiple git
mirrors are not supported

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 21:08:17 +01:00
Felix Fietkau
c7c1cf5618 treewide: clean up and unify PKG_VERSION for git based downloads
Also use default defintions for PKG_SOURCE_SUBDIR, PKG_SOURCE

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-22 16:42:21 +01:00
Tedaz
1831e61699 x86/64: enable Hyper-V support in the x86_64 kernel config
Enabled Hyper-V network interface card driver, display adapter driver,
storage driver, keyboard driver, mouse driver and Hyper-V utility and
EFI boot support in the kernel for subtarget x86/64.
Convert the img file to vhd by Ubuntu qemu-img, rather than by the buildroot's
built-in qemu-img.

Tested on Windows Server 2008 r2 and 2012 r2 Gen1 and Gen2 VMs.

Signed-off-by: Tedaz <tedaz99999@hotmail.com>
2016-12-22 16:42:19 +01:00
Henryk Heisig
c8043137bb ramips: Add support to TP-Link Archer MR200
CPU: MT7620N 580MHz
Flash: 8MB
RAM: 64MB
build-in modem 3G/4G
four ethernet port 10/100Mbps

Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-12-22 15:03:30 +01:00
Vitaly Chekryzhev
190ee7d86b ramips: add support for ZyXEL Keenetic Omni / Omni II
Factory image can be installed via Zyxel WebUI.

Signed-off-by: Vitaly Chekryzhev <13hakta@gmail.com>
2016-12-22 15:03:13 +01:00
Radek Dostál
3561d89ad6 ar71xx: RE450: enable building of TP-Link RE450
Signed-off-by: Radek Dostál <rd@radekdostal.com>
2016-12-22 14:50:06 +01:00
Tal Keren
9c475eca3e ar71xx: add support for TP-Link RE450
Add full support for TP-Link RE450.
The wireless SoC is similiar to Archer C7: QCA9558 + QCA9880 (pci).
The ethernet interface is AR8035, but the mdio is connected to the gpio and
the chipset builtin mdio bus isn't used, which is unique (and weird), so the
kernel gpio mdio module is used.
The two ethernet leds are connected to the GPIO, so they are both configured,
one to indicate link status and the other to indicate data transfer.

The generation of the image was added to the image Makefile.
The return value of tplink-safeloader is not ignored anymore (to fail on error)

The result factory image is flashable from the stock web ui.

Signed-off-by: Tal Keren <kooolk@gmail.com>
[rd@radekdostal.com: ar71xx: RE450: do not build RE450 for nand]
Signed-off-by: Radek Dostál <rd@radekdostal.com>
[hyniu@o2.pl: ar71xx: RE450: Renaming LED accordance with the standard]
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
[jo@mein.io: squash fixes from Radek and Henryk into original commit]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-22 14:50:05 +01:00
Radek Dostál
236fc232bb ar71xx: sort items in 11-ath10k-caldata alphabetically
Requested-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Radek Dostál <rd@radekdostal.com>
2016-12-22 14:50:05 +01:00
Tal Keren
0d9d980ecd firmware-utils: kernel image generator for TP-Link RE450
The firmware image that is used in TP-Link RE450 (and some more devices from
the RE series) is tplink-safeloader.
In the kernel partition, the kernel is compressed in a regular tp-link
firmware that is just used for booting. Since it is only used for compressing
and booting, only four fields are filled in the header:
Vendor, version, kernel load address and kernel entry point.
mktplinkfw-kernel is a simpler version of mktpolinkfw that generate such
images. It also specifies the hardware id (as it is in the product info
section), so when doing a sysupgrade - the existing code will check for
hardware compatibility.

Signed-off-by: Tal Keren <kooolk@gmail.com>
[rd@radekdostal.com: add build target to .../image/tp-link.mk]
Signed-off-by: Radek Dostál <rd@radekdostal.com>
2016-12-22 14:50:05 +01:00
Matthias Schiffer
324bdf3ecc
ar71xx: remove redundant -j from TL-WR1043ND v4 kernel build command
mktplinkfw ignores -j in combined mode, the EOF marker is added by
tplink-safeloader.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-12-21 23:29:00 +01:00
Alexandru Ardelean
81a2f9d6f8 target/linux/x86/image: add explicit prefix to grub-mkimage command
In the latest version of grub-mkimage, the prefix option is mandatory.
Not supplying it fails with:
```
Prefix not specified (use the -p option).
```

In grub-2.02-beta2 a DEFAULT_DIRECTORY was defined
in `include/grub/osdep/hostfile_unix.h` as:
```
 #if defined (__NetBSD__)
 /* NetBSD uses /boot for its boot block.  */
 # define DEFAULT_DIRECTORY  "/"GRUB_DIR_NAME
 #else
 # define DEFAULT_DIRECTORY  "/"GRUB_BOOT_DIR_NAME"/"GRUB_DIR_NAME
 #endif
```

Where:
* GRUB_BOOT_DIR_NAME == boot
* GRUB_DIR_NAME == grub

This was used if the -p option was omitted.

Signed-off-by: Alexandru Ardelean <ardeleanalex@gmail.com>
2016-12-20 16:24:21 +01:00
Ludwig Thomeczek
1a4d07c2c5
ar71xx: add support for TP-LINK WR1043ND v4
Signed-off-by: Ludwig Thomeczek <ledesrc@wxorx.net>
2016-12-20 14:38:48 +01:00
Matthias Schiffer
0495181529
ar71xx: rename mktplinkfw-initramfs to more generic mktplinkfw-combined
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-12-20 14:38:48 +01:00
John Crispin
c21af889bb brcm2708: unbreak the spidev build
a generic patch made this patch fail to apply cleanly leading to aborted builds

Signed-off-by: John Crispin <john@phrozen.org>
2016-12-20 13:47:57 +01:00
John Crispin
87522a7bf2 linux: drop deprected hifn795x patch
this was needed years ago by the OCF

Signed-off-by: John Crispin <john@phrozen.org>
2016-12-20 13:43:30 +01:00
John Crispin
f7319244cb linux: drop HSO support patch
This patch is part of a series adding support for 0x9200 and 0x9300. The
prior was merged into the upstream kernel while the latter was not due
to lack of testers. Drop the patch as it is untested and most likely
unused.

Signed-off-by: John Crispin <john@phrozen.org>
2016-12-20 09:57:55 +01:00
Adrian Panella
d700c120bf ipq806x: EA8500 fix sysupgrade over stock firmware
When running sysupgrade for the first time over the second partition
(that still had stock firmware) the rootfs wasn't flashed as there
wasn't enough space.
This happend because stock also uses UBI, but the volume name wasn't
recognised and wasn't deleted before flashing.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-12-20 09:35:37 +01:00
Giuseppe Lippolis
96a7ee3c80 ramips: adding registration for si3210
The si3210 is a SLIC device providing a complete analog telephone
interface and therefore frequently used in soho router.
The si3210 have a native spi interface to be controlled by the CPU
but currently there is no dedicated driver in lede.
Adding a registration for this device in spidev allow to control the
device in user space.
This way of patching is also in line with the rationale of the spidev
driver, see: http://marc.info/?t=148145791900001&r=1&w=2
The si3210 has been also added in the DWR-512 DT to properly describe
the HW.

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2016-12-20 09:35:37 +01:00
Christian Lamparter
305704f405 mediatek: enable support for vfpv4 and neon
While researching for the armvirt target, I looked at the
existing arm platforms. It turns out that the mediatek target
with its sole MT7623N/A chip is sold as a "highly integrated
multimedia network router system-on-chip". To that end, it
lists support for the "NEON multimedia processing engine with
SIMDv2 / VFPv4 ISA support".

<http://topics.mediatek.com/en/products/connectivity/wifi/home-network/wifi-ap/mt7623na/>

So this patch enables the CPU_SUBTYPE to use this information.
This should have the nice side effect that LEDE's phase2 builders
no longer need to built a separate "cortex-a7" target, so this
should free up some resources.

Cc: John Crispin <john@phrozen.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-12-20 09:35:36 +01:00
Kevin Darbyshire-Bryant
79abb8f140 kernel: bump to 4.4.39
Bump & refresh patches for all 4.4 targets.

Compile & run tested: ar71xx Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-12-20 09:35:36 +01:00
L. D. Pinney
02ca833f04 ramips: WNDR3700v5 fix mtd partitions and radios
Fix the mtd partition layout and enable both radios in the dts

Tested-by Andrius Štikonas <andrius@stikonas.eu>
Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
2016-12-20 09:35:35 +01:00
Felix Fietkau
720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
David Lutz
aada15af93
ar71xx: add support for TP-LINK TL-WR940N v4
Signed-off-by: David Lutz <kpanic@hirnduenger.de>
2016-12-16 11:12:46 +01:00
Yousong Zhou
a2798cff0f realview: drop the target
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-12-16 07:56:35 +01:00
Yousong Zhou
44ecfc26eb armvirt: new target
An ARM Cortex-A15 machine provided by QEMU.

Kernel drivers enabled:

 - pl011, uart
 - pl031, rtc
 - pl061, gpio
 - pci-host-generic
 - virtio_{mmio,pci,net,blk,scsi,9p,console,balloon}
 - smp with NR_CPUS=4
 - cpu-hotplug
 - ext4
 - neon, vfp extensions support (otherwise userland will fail with
   illegal instruction signal (code 0x00000004))
 - DEBUG_BUGVERBOSE for debug purposes

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-12-16 07:56:35 +01:00
Jo-Philipp Wich
98b14e0906 ar71xx: fix TL-WR842N v2 switch port order
The TL-WR842N v2 has the following switch port layout with swconfig port 0
being connected to eth1:

            Power  LAN4    LAN3    LAN2    LAN1    WAN     USB
             (*) | [...] | [...] | [...] | [...] | [...] | [.]
    swconfig port:   1       4       3       2      n/a
    netdev:        eth1    eth1    eth1    eth1    eth0

Adjust the board defaults to match this model specific layout.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 18:43:48 +01:00
Gad Krumholz
21cb84435a ar71xx: Added missing support for Linksys E2100L
It's based on the WRT160NL according to
https://wiki.openwrt.org/toh/linksys/e2100l

Based on research done here: https://forum.openwrt.org/viewtopic.php?id=24244
and here: https://forum.openwrt.org/viewtopic.php?pid=120791#p120791 this patch
was conceived.

Signed-off-by: Gad Krumholz <gad.krumholz@gmail.com>
[Jo-Philipp Wich: fix ordering, move addpattern change into separate commit]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 18:42:48 +01:00
Jo-Philipp Wich
fc6ed9521d brcm63xx: image: trim revision code used for --rsa-signature
The imagetag RSA signature field may not exceed 20 characters, so trim the
Git hash portion from the REVISION variable in order to ensure that the
resulting string fits within this field.

The current revision values may be longer than 20 chars, especially when
building within a dirty tree. In this case, the revision will look like
"r2435+75-b4aa3c8" which, combined with the "LEDE-" prefix, is 21 chars long.

Fixes the following error spotted by the buildbots:

    Error: RSA Signature (rsa_signature,r) too long.
    make[4]: *** [.../lede-brcm63xx-generic-NEUFBOX6-squashfs-cfe.bin] Error 1

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 18:39:14 +01:00
Giuseppe Lippolis
132b88ea39 ramips: adding DWM-158 3g Modem
This patch add the 3G modem DWM-158 to the usb-serial option driver.
The DWM-158 is a pcie 3G modem. It is embedded in the DWR-512 modem
supportet by lede. The patch has been submitted and merged in the upstream
linux-next repository.

Signed-off-by: Giuseppe Lippolis <giu.lippolis@gmail.com>
2016-12-14 10:37:01 +01:00
Huan Truong
fd62fa752b ar71xx: Add support for Netgear WNR2000v1
This patch adds supports for the WNR2000v1 board with 4MB flash, and
produces device-specific factory, rootfs, and sysupgrade files for the
WNR2000v1. This board is errorneously claimed as supported on the OpenWRT
wiki as AP81, but AP81 image would not work because of APT81 image
requiring having 8MB of flash, while WNR2000v1 has only 4MB.

The image requires the u-boot bootloader to be modified to fuhry's
bootloader first.

Short specification:

- CPU: Atheros AR9132
- 4x 10/100 Mbps Ethernet, 1x WAN 10/100 Mbps
- 4 MB of Flash
- 32 MB of RAM
- UART header (J1) on board
- 1x button

Factory/Initial flash instructions:

- Set up a TFTP server on your local machine.
- Download the uImage for ar71xx-generic and the rootfs image for
  ar71xx-generic-wnr2000 and save in the tftp server root.
- Gain serial access to the router via the UART port (telnetenable over
  the network only won't work!).
- Upgrade the u-boot bootloader to fuhry's version by running the
  script: http://fuhry.com/b/wnr2000/install-repart.sh
- When the router restarts, interrupt u-boot and gain access to u-boot command line.
- Repartititon the board and flash initial uImage and rootfs as follow.

Commands to type in u-boot:

	# tells u-boot that we have a tftp server on 192.168.1.10
	setenv serverip 192.168.1.10

	# tells u-boot that the router should take the address 192.168.1.1
	setenv ipaddr 192.168.1.1

	# erase the region from 0x050000-0x3f0000
	erase 0xbf050000 +0x3A0000

	# loads sqfs.bin on TFTP server, and put it to memory address 0x81000000
	tftpboot 0x81000000 sqfs.bin
	# it will tell you the length of sqfs.bin in hex, let's say ZZZZZZ
	# copy bit by bit 0xZZZZZZ bytes from offset 0x050000
	cp.b 0x81000000 0xbf050000 0xZZZZZZ

	# same to the uImage.bin, write it right next to sqfs.bin
	# again, 0xYYYYYY is the length that tftpboot reports
	tftpboot 0x81000000 uImage.bin
	cp.b 0x81000000 0xbf2a0000 0xYYYYYY

	# We need to tell the kernel what board it is booting into, and where to find the partitions
	setenv bootargs "board=WNR2000 console=ttyS0,115200 mtdparts=spi0.0:256k(u-boot)ro,64k(u-boot-env)ro,3712k(firmware),64k(art)ro rootfstype=squashfs,jffs2 noinitrd"

	# Tell u-boot where to find the uImage
	setenv bootcmd "bootm 0xbf2a0000"

	# Tell u-boot to save parameters to the u-boot-env partitions
	saveenv

	# Reset the board
	reset

Tested on:

- WNR2000v1 board.
- Initial flash works.

Known bugs:

- I don't know why factory image doesn't work on initial flash on stock
  firmware in u-boot recovery mode while it should.
- Sysupgrade does not yet work, if you do -f it will mess up your
  installation (requiring a reinstall of sqfs and uImage).

Signed-off-by: Huan Truong <htruong@tnhh.net>
2016-12-14 10:37:01 +01:00
Jing Lin
c9a9f9b8ce ar71xx: Add ath10k-firmware-qca988x for DomyWifi DW33D
The default package selection was missing the correct FW for ath10k to
work.

Signed-off-by: Jing Lin <mumuqz@163.com>
2016-12-14 10:37:01 +01:00
Jo-Philipp Wich
e2f8d200f5 netfilter: drop proprietary xt_id match
The xt_id match was used by the firewall3 package to track its own rules but
the approach has been changed to use xt_comment instead now, so we can drop
this nonstandard extension.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-12-14 01:05:06 +01:00
Rafał Miłecki
d6ef917bdb kernel: backport ubifs support for dirty_writeback_interval
These patches were queued for 4.10. For possible use cases see added:
[PATCH] ubifs: Use dirty_writeback_interval value for wbuf timer

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-13 09:40:46 +01:00
Rafał Miłecki
2ca4c74279 bcm53xx: backport missed BCM53573 ILP patch from 4.10
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-13 09:26:27 +01:00
Kevin Darbyshire-Bryant
f5b833b8fe kernel: bump to 4.4.38
Bump & refresh patches for all 4.4 supported targets.

Compile & run tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-12-13 08:28:28 +01:00
Rafał Miłecki
1feb166ee7 bcm53xx: backport DTS patches accepted for 4.11
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-13 07:52:57 +01:00
Matthias Schiffer
fcf54f79d2
ar71xx: simplify model detection for TP-Link Pharos devices
This also makes the detection more flexible, as it doesn't need to check
for each model explicitly.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-12-12 13:45:37 +01:00
Felix Fietkau
8f23ec609c ar71xx: remove obsolete flash chip locking code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-12 10:22:19 +01:00
Felix Fietkau
a5923cd549 ar71xx: remove PB92 reference design board support
Due to flash size limitations, support for this board has not been
functional for years

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-12 10:22:18 +01:00
Felix Fietkau
30285facbe ar71xx: remove AP113 reference design board support
Due to flash size limitations, support for this board has not been
functional for years

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-12 10:22:18 +01:00
Felix Fietkau
4c8a9b8e39 ar71xx: remove AP81 reference design board support
This board is very old and unlikely to still be relevant today.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-12 10:22:18 +01:00
Felix Fietkau
fd95dec2e3 ar71xx: remove obsolete duplicate driver source file
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-12 10:22:18 +01:00
Felix Fietkau
441ee62931 ar71xx: remove AP83 reference design board support
This board is very old and unlikely to still be relevant today. Support
for it contains a significant amount of device specific baggage which is
worth getting rid of.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-12 10:22:18 +01:00
Felix Fietkau
fa04682f21 ar71xx: clean up spi controller related patches
Remove various hacks for fast read, un-break device tree support

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-12 10:22:17 +01:00
Rafał Miłecki
52c7375c13 bcm53xx: disable CONFIG_FW_LOADER_USER_HELPER_FALLBACK
There are many targets using user space scripts to generate firmware but
bcm53xx doesn't need this, so let's disable that kernel option.

This lets us avoid some scary-looking kernel warnings like:
brcmfmac 0001:04:00.0: Falling back to user helper
firmware brcm!brcmfmac43602-pcie.txt: firmware_loading_store: map pages failed

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-12 09:57:40 +01:00
Martin Blumenstingl
6b94234a65 lantiq: remove "init" kernel command line parameter from bootargs
/etc/preinit has been the default init-script for a very long time (at
least since Linux 2.6.30 in OpenWrt). Remove the kernel command line
"init" parameter to get rid of duplicate and inconsistent definitions
of this parameter (some boards, like FRITZ3370 for example did not use
it at all, while it's just copy and paste on others).

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-12-12 09:57:40 +01:00
Martin Blumenstingl
4995c64857 lantiq: specify console using stdout-path instead of cmdline argument
Use devicetree's /chosen/stdout-path instead of the kernel command line
(embedded in the .dts-files) to specify the serial console. Using the
chosen node is recommended on devicetree based platforms.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-12-12 09:57:40 +01:00
Piotr Dymacz
c198ca682c ar71xx: add support for YunCore SR3200 and XD3200
YunCore SR3200 is a dual-band AC1200 router, based on Qualcomm/Atheros
QCA9563+QCA9882+QCA8337N.

YunCore XD3200 (FCC ID: 2ADUG-XD3200) is a dual-band AC1200 ceiling mount
AP with PoE support, based on Qualcomm/Atheros QCA9563+QCA9882+QCA8334.

Common specification:

- 775/650/258 MHz (CPU/DDR/AHB)
- 128 MB or RAM (DDR2)
- 16 MB of FLASH (SPI NOR)
- 2T2R 2.4 GHz, with ext. PA (SKY65174-21), up to 30 dBm
- 2T2R 5 GHz, with ext. PA (SKY85405-11) and LNA (SKY85601-11), up to 30 dBm

SR3200 specification:

- 5x 10/100/1000 Mbps Ethernet
- 6x ext. RP-SMA antennas (actually, only 4 are connected with radio chips)
- 3x LED (+ 5x LED in RJ45 sockets), 1x button
- UART header on PCB

XD3200 specification:

- 2x 10/100/1000 Mbps Ethernet, with 802.3at PoE support (WAN port)
- 4x internal antennas
- 3 sets of LEDs on external PCB (+ 2x LED near RJ45 sockets), 1x button
- UART and JTAG (custom 6-pin, 2 mm pitch) headers on PCB

LED for 5 GHz WLAN is currently not supported on both devices as it is
connected directly to the QCA9882 radio chip.

Flash instruction under vendor firmware, using telnet/SSH:

1. If your firmware does not have root password, go to point 5
2. Connect PC with 192.168.1.x address to LAN or WAN port
3. Power up device, enter failsafe mode with button (no LED indicator!)
4. Change root password and reboot (mount_root, passwd ..., reboot -f)
5. Upload lede-ar71xx-...-sysupgrade.bin to /tmp using SCP
6. Connect PC with 192.168.188.x address to LAN port, SSH to 192.168.188.253
7. Invoke:
- cd /tmp
- fw_setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000"
- mtd -e firmware -r write lede-ar71xx-...-sysupgrade.bin firmware

Flash instruction under U-Boot, using UART:

1. tftp 0x80060000 lede-ar71xx-...-sysupgrade.bin
2. erase 0x9f050000 +$filesize
3. cp.b $fileaddr 0x9f050000 $filesize
4. setenv bootcmd "bootm 0x9fe80000 || bootm 0x9f050000"
5. saveenv && reset

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-12-12 09:57:40 +01:00
Yutang Jiang
ad907e1c03 layerscape: add 64b/32b target for ls1046ardb device
Add support for NXP layerscape ls1046ardb 64b/32b Dev board.

LS1046ARDB Specification:
-------------------------
Memory subsystem:
* 8GByte DDR4 SDRAM (64bit bus)
* 512 Mbyte NAND flash
* Two 64 Mbyte high-speed SPI flash
* SD connector to interface with the SD memory card
* On-board 4G eMMC
Ethernet:
* Two XFI 10G ports
* Two SGMII ports
* Two RGMII ports
PCIe:
* PCIe1 (SerDes2 Lane0) to miniPCIe slot
* PCIe2 (SerDes2 Lane1) to x2 PCIe slot
* PCIe3 (SerDes2 Lane2) to x4 PCIe slot

* USB 3.0: one super speed USB 3.0 type A port, one Micro-AB port
* UART: supports two UARTs up to 115200 bps for console

Signed-off-by: Yutang Jiang <yutang.jiang@nxp.com>
2016-12-12 09:57:40 +01:00
Hauke Mehrtens
7c47f43fe6 lantiq: falcon: remove bootargs-append
This attribute is not evaluated any more and the boot loader on these
reference boards does not provide a broken root= or console= parameter.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-12-10 16:08:06 +01:00
Mathias Kresin
ee5a6c1041 lantiq: simplify ath9k eeprom extraction script
Add an extra function to patch the mac and fixup the checksum
afterwards. Calculate the checksum position automatically. The offset
to the mac address is the same for all checksum protected EEPROMs.

No EEPROM requires a byte swapped mac address. The mac byte swap code
was required due to an bug in the script that is now fixed.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-08 19:36:53 +01:00
Martin Blumenstingl
afa3709266 lantiq: fix ath9k EEPROM data swapping for some devices
The EEPROM data in the flash of the ARV7518PW, ARV8539PW22,
BTHOMEHUBV2B and BTHOMEHUBV3A is stored byte-swapped (swab16), meaning
that for example the ath9k base_eep_header fields "version" (high and
low byte), "opCapFlags" and "eepMisc" are swapped (the latter ones are
just 1 byte wide, thus their position is swapped).

The old "ath,eep-endian" property enabled the corresponding swapping
logic in the ath9k driver (swab16 in ath9k_hw_nvram_swap_data, which is
based on the magic bytes in the EEPROM data which have nothing to do
with the calibration data - thus this logic should not be used
anymore).
Since we have switched to the upstream ath9k devicetree bindings there
is no binding anymore which enables swab16 in ath9k (as this logic is
not recommended anymore as explained above), leading to ath9k
initialization errors:
ath: phy0: Bad EEPROM VER 0x0001 or REV 0x00e0
(this shows that the version field is swapped, expected values are VER
0x000E and REV 0x0001)

Swapping the ath9k calibration data when extracting it from the flash
fixes the devices listed above (all other devices do not require
additional swapping, since the position of the fields is already as
expected by ath9k). This allows ath9k to read the version correctly
again, as well as the more important "eepmisc" field (which is used for
determining whether the data inside the EEPROM is Big or Little Endian
which is required to parse the EEPROM contents correctly).

Fixes: a20616863d ("lantiq: use ath9k device tree bindings
binding/owl-loader")

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-12-08 19:36:22 +01:00
Rafał Miłecki
ee55a19a61 bcm53xx: update patch adding fake USB doorbell
Rob suggested I should use of_machine_is_compatible insteak of a new
property and updated patch has been sent.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-07 09:22:39 +01:00
Rafał Miłecki
0422f8bcec kernel: backport LED patch which will allow better DT integration
It's not used by any driver yet, it may just simplify development and
testing new features.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-06 19:50:20 +01:00
Rafał Miłecki
4b3f9bc28d kernel: fix potential crash in usbport LED trigger driver
This backports upstream accepted fix.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2016-12-06 19:50:20 +01:00
Matthias Schiffer
9c5af2489a
ar71xx: fix LEDs and sysupgrade support for TL-WA801ND v3
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-12-06 19:08:35 +01:00
BangLang Huang
960c477432 ramips: Fix led init script for Lenovo Y1/Y1s
This commit fix the led init script for Lenovo Y1 and
Y1S due to the manual and dts file.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2016-12-04 15:51:18 +01:00
Álvaro Fernández Rojas
011f2c26f1 brcm2708: update linux 4.4 patches to latest version
As usual these patches were extracted and rebased from the raspberry pi repo:
https://github.com/raspberrypi/linux/tree/rpi-4.4.y

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-12-04 12:32:04 +01:00
Álvaro Fernández Rojas
758ef7aa99 kernel: bump to 4.4.36
Refresh patches on all 4.4 supported platforms.
Compile & run tested: brcm2708/bcm2710 - Raspberry Pi 3

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-12-04 12:31:30 +01:00
Felix Fietkau
1a63b81965 orion: make image size errors non-fatal
Fixes build errors on the generic subtarget

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-04 11:41:53 +01:00
Florian Fainelli
0917999396 orion: Enable CONFIG_MV_XOR
This is helpful for Orion-based NAS boxes that have the XOR engine enabled
since it provides faster software RAID.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:53 +01:00
Florian Fainelli
2cb90461c8 orion: Add uboot-envtools in the default package list
Makes sense since most, if not all orion platforms use this bootloader.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:53 +01:00
Florian Fainelli
7e38cd7a8d kernel: Add missing kernel config symbol
Add CONFIG_DW_DMAC_PCI

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:52 +01:00
Florian Fainelli
0d5097036e orion: Set appropriate DEVICE_TYPE for harddisk target
The harddisk target is for NAS boxes, so set the DEVICE_TYPE accordingly so we
get a sensible default package selection.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:52 +01:00
Florian Fainelli
3043a4f520 orion: Switch to kernel 4.4
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:52 +01:00
Florian Fainelli
01bda7f05f orion: Advertise support for RTC
Otherwise, we can't select RTC_SUPPORT and the corresponding kmod-rtc-*
packages.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:52 +01:00
Florian Fainelli
3ca46aa257 orion: Make sub-targets augment FEATURES, not re-define it
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:52 +01:00
Florian Fainelli
a909a5d676 orion: Build images for Buffalo Terastation Pro II/Live
Enable support for this machine in the kernel and also produce valid image
files with the correct machine id.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:51 +01:00
Florian Fainelli
da5155b1a5 orion: Add support for 4.4 kernel
Patches and configuration apply just fine on the Marvell Orion target.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:51 +01:00
Florian Fainelli
cec7e661e7 orion: Fold DT2 setup files into patch
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
2016-12-04 11:41:51 +01:00
Felix Fietkau
832fb99da2 kernel: Add check to of_scan_flat_dt() before accessing initial_boot_params
Fixes a bug that affects rt288x

Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-04 11:41:50 +01:00
Felix Fietkau
b3c5db79eb kernel: Fix alloc_node_mem_map with ARCH_PFN_OFFSET
Fixes a bug that affects rt288x

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-04 11:41:50 +01:00
Felix Fietkau
2135e54c00 ar71xx: set GPIO reset line for Ubiquiti NanoStation Loco XW
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-04 11:41:50 +01:00
Felix Fietkau
106a4605c8 ar71xx: add support for configuring at803x PHY GPIO reset via platform data
Needed to work around ethernet hang issues on Ubiquiti NanoStation Loco XW,
because ar71xx is not converted to device tree yet.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-04 11:41:50 +01:00
Felix Fietkau
feb25f1a5b kernel: add support for the AT8032 PHY
This PHY is used on the Ubiquiti Networks NanoStation Loco XW

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-04 11:41:50 +01:00
Felix Fietkau
06a21e12ee kernel: backport some upstream at803x fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-04 11:41:49 +01:00
Felix Fietkau
566de813c3 ramips: prevent packet forwarding on mt7620 between switch ports during init (FS#103)
By default, forwarding between all ports is allowed on init. This is
problematic in cases where some ports are supposed to be isolated from
each other, most commonly LAN/WAN separation.

REG_ESW_PORT_PCR(port) has a destination mask for a particular port,
controlling what other ports it is allowed to send packets to.
Instead of initializing all to 0xff (all ports), allow each physical
port to send to the CPU port, and the CPU port to send to all other
ports.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-04 11:41:49 +01:00
Yong-hyu, Ban
377eac0ceb ramips: fix LAN port order of WeVO W2914NS v2
Signed-off-by: Yong-hyu, Ban <perillamint@gentoo.moe>
2016-12-04 08:22:07 +01:00
BangLang Huang
23b58f8acb ramips: fix PBR-D1 button definition
Due to the product specification, the button on PBR-D1 should be
reset, not wps.

Signed-off-by: BangLang Huang <banglang.huang@foxmail.com>
2016-12-04 07:03:17 +01:00
Tobias Wolf
2e020e2cef ramips: add support for PCI based OHCI/EHCI support for F5D8235 V1
This router uses an PCI attached NEC EHCI controller to support the single USB port.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2016-12-04 07:03:17 +01:00
Tobias Wolf
13c0d208b2 ramips: introduce CONFIG_PCI and CONFIG_OF_*PCI for rt288x
This is a prerequisite for F5D8235 V1 to use PCI based OHCI/EHCI.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2016-12-04 07:03:17 +01:00
Tobias Wolf
c2ed721e89 ramips: improve F5D8235 V1 support
This fixes the partition name for the firmware splitter, the cfi
address and adds the mtd-eeprom address for wmac. It adds additional
LEDs and make use of them in diag.sh and 01_leds.

Please note that the ":blue:wired" LED is used because the
":blue:router" behaviour is unpredictable for failsafe indication. The
issue with the router LED is that you have two states only.
"off" is steady on and "on" blinks. Therefore the wired LED is more
suitable.

Furthermore it reuses the correct switch configuration definition to
reflect the device ports and numbering. Additionally fixes the issue
that the default configuration is not applied as no port 6 exists on
this device.

Signed-off-by: Tobias Wolf <github-NTEO@vplace.de>
2016-12-04 07:03:17 +01:00
Vignesh Balasubramaniam
62e4c915ee mvebu: fix sysupgrade for Linksys WRT3200ACM
sysupgrade command fails due to missing U-Boot environment-processing
binaries on sysupgrade ramdisk. The missing binaries result in the
following output:

Switching to ramdisk...
	Performing system upgrade...
	ash: /usr/sbin/fw_printenv: not found
	ash: fw_setenv: not found
	ash: touch: not found
	cannot find target partition

Signed-off-by: Vignesh Balasubramaniam <vigneshb.hp@gmail.com>
2016-12-04 07:03:17 +01:00
Mathias Kresin
c95e4e715d mvebu: fix image validation error
The name from the Device define will be used in the metadata. Due to
typo/different spelling, this name might not match the one exported in
/lib/mvebu.sh.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-04 07:03:17 +01:00
Mathias Kresin
d9d838bc97 lantiq: fix image validation errors
The boards did not have the name set that is expected during metadata
validation on sysupgrade.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-12-04 07:03:17 +01:00
John Crispin
7c809f1687 ramips: fix sdhci support on mt7621
the IRQ level was wrong. refresh the patch while at it.

Signed-off-by: John Crispin <john@phrozen.org>
2016-12-01 18:30:41 +01:00
Andrew Yong
07b571a435 ramips: RB750Gr3: Add pwr LED and buzzer to DTS
use pwr LED in diag.sh
Expose unused pinmux pins as GPIOs
export power LED and buzzer pins
Use rb750gr3:blue:pwr LED in diag.sh for boot status instead of rb750gr3:green:usr

Signed-off-by: Andrew Yong <me@ndoo.sg>
2016-12-01 16:17:55 +01:00
dissent1
fef6a96d9e ipq806x: add thermal sensor driver
Allows to check cpu temperature.

Huge thanks to @hnyman for valuable assistance!

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-12-01 15:47:43 +01:00
Pavel Kubelun
2b71f958b1 ipq806x: increase coherent dma pool size
Cherry-picked and rebased from
https://source.codeaurora.org/quic/qsdk/system/openwrt/tree/?h=korg/linux-3.4.y/release/arugula_bb_cs

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-12-01 15:47:43 +01:00
Pavel Kubelun
8fca99266e ipq806x: add enable reg and masks for PRNG
Cherry-picked from https://source.codeaurora.org/quic/qsdk/system/openwrt/tree/?h=korg/linux-3.4.y/release/arugula_bb_cs

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-12-01 15:47:43 +01:00
Pavel Kubelun
94e4ee5395 net: ar8327: modify some configuration of switch
Imported from https://source.codeaurora.org/quic/qsdk/system/openwrt/commit/?h=korg/linux-3.4.y/release/arugula_bb_cs&id=2be4f8a8b205ae1a37db44839864451ebe893e6e
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

Enable flow control of LAN and WAN ports to
get better performance.
Setup pvid as 0 for all ports during initialisation
to avoid confusion during system or switch INIT.
Disable PORT MAC before config MAC to avoid it work abnormal.
This change is for IR-054144, IR-057315.

Change-Id: I345f3dffa59ad3f97150e09692723da12a7b1067
Signed-off-by: Zou Shunxiang <shunxian@codeaurora.org>
Signed-off-by: xiaofeis <xiaofeis@codeaurora.org>
2016-12-01 15:47:43 +01:00
Pavel Kubelun
5a69f59602 net: ar8216: address security vulnerabilities in swconfig & ar8216
Imported from e1aaf7ec00%5E%21/#F0
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

CHROMIUM: net: ar8216: address security vulnerabilities in swconfig & ar8216

This patch does the following changes:
*address the security vulnerabilities in both swconfig framework and in
 ar8216 driver (many bound check additions, and turned swconfig structure
 signed element into unsigned when applicable)
*address a couple of whitespaces and indendation issues

BUG=chrome-os-partner:33096
TEST=none

Change-Id: I94ea78fcce8c1932cc584d1508c6e3b5dfb93ce9
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Reviewed-on: https://chromium-review.googlesource.com/236490
Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
Commit-Queue: Toshi Kikuchi <toshik@chromium.org>
Tested-by: Toshi Kikuchi <toshik@chromium.org>
2016-12-01 15:47:43 +01:00
Pavel Kubelun
a3454d1929 net: ar8216: prevent device duplication in ar8xxx_dev_list
Import from fd7b89dd46%5E%21/#F0
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

CHROMIUM: drivers: ar8216: prevent device duplication in ar8xxx_dev_list

If probe is called twice, once for PHY0 and a second time for PHY4,
the same switch device will be added twice to ar8xxx_dev_list, while
supposedly this list should have one element per hardware switch present
in the system.

While no negative impact have been observed, it does happen if a
platform instanciates these two PHYs from device-tree, as an example.

Change-Id: Iddcbdf7d4adacb0af01975b73f8e56b4582e894e
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Reviewed-on: https://chromium-review.googlesource.com/234790
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
Tested-by: Toshi Kikuchi <toshik@chromium.org>
2016-12-01 15:47:43 +01:00
Pavel Kubelun
eb049d3777 net: ar8216: hold ar8xxx_dev_list_lock during use_count--
Import from c3fd96a7b8%5E%21/#F0
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

CHROMIUM: drivers: ar8216: hold ar8xxx_dev_list_lock during use_count--

It is possible for the remove() callback to run twice in parallel, which
could result into --use_count returning only 1 in both cases and the
rest of the unregistration path to never be reached.

This case has never been observed in practice, but we will fix
preventively to make the code more robust.

BUG=chrome-os-partner:33096
TEST=none

Change-Id: If09abe27fdb2037f514f8674418bafaab3cbdef6
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Reviewed-on: https://chromium-review.googlesource.com/232870
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
Tested-by: Toshi Kikuchi <toshik@chromium.org>
2016-12-01 15:47:43 +01:00
Pavel Kubelun
65b20d8b64 net: ar8327: replace sprintf() by scnprintf()
Import from fd0c41c7b9%5E%21/#F0
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

CHROMIUM: drivers: ar8216: replace sprintf() by scnprintf()

BUG=chrome-os-partner:33096
TEST=none

Change-Id: Ib82035c9f2769a86d3e90f9573a09e5700ff5676
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Reviewed-on: https://chromium-review.googlesource.com/232829
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Tested-by: Toshi Kikuchi <toshik@chromium.org>
Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
2016-12-01 15:47:43 +01:00
Pavel Kubelun
9aa734f8f5 net: ar8327: remove unnecessary spinlocks
Import from 541c15f8dd%5E%21/#F0
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

CHROMIUM: drivers: ar8216: remove unnecessary spinlocks

BUG=chrome-os-partner:33096
TEST=none

Change-Id: Ia1b51258504501863fd3298717cc923a1baf34ca
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Reviewed-on: https://chromium-review.googlesource.com/232828
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
Tested-by: Toshi Kikuchi <toshik@chromium.org>
2016-12-01 15:47:43 +01:00
Pavel Kubelun
7de8d5322e net: ar8216: sync mib_work cancellation
Import from c05af20272
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>

CHROMIUM: drivers: ar8216: sync mib_work cancellation

ar8xxx_mib_stop() is called from ar8xxx_phy_remove(), so we want to make
sure the work doesn't run after priv is freed / the device ceases to
exist.

BUG=chrome-os-partner:33096
TEST=none

Change-Id: Iafb44ce93a87433adc4576e5fea5fda58d1f43a9
Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
Reviewed-on: https://chromium-review.googlesource.com/232827
Reviewed-by: Matthias Kaehlcke <mka@chromium.org>
Reviewed-by: Toshi Kikuchi <toshik@chromium.org>
Reviewed-by: Grant Grundler <grundler@chromium.org>
Tested-by: Toshi Kikuchi <toshik@chromium.org>
2016-12-01 15:47:43 +01:00
Pavel Kubelun
550f71ec8d ipq806x: refactor rpm clock controller patches
RPM clock controller driver had made its way upstream and previous
approach of directly redoing a driver to support ipq806x is a no go anymore.

Thus reverting mentioned patches to upstream state and renaming
in correct patch numbering accordance.

To make the driver work on ipq806x boards we introduce a custom patch.

Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-12-01 15:47:43 +01:00
Felix Fietkau
b2443838e6 kernel: add missing config symbols
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-01 15:05:03 +01:00
Kevin Darbyshire-Bryant
102cb4742c kernel: bump to 4.4.35
Refresh patches on all 4.4 supported platforms.

077-0005-bgmac-stop-clearing-DMA-receive-control-register-rig.patch
removed as now upstream.

Compile & run tested: ar71xx - Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-11-29 21:12:08 +01:00