ar71xx: remove AP113 reference design board support

Due to flash size limitations, support for this board has not been
functional for years

Signed-off-by: Felix Fietkau <nbd@nbd.name>
This commit is contained in:
Felix Fietkau 2016-12-09 14:26:12 +01:00
parent 4c8a9b8e39
commit 30285facbe
12 changed files with 0 additions and 106 deletions

View file

@ -45,7 +45,6 @@ arduino-yun)
ucidef_set_led_wlan "wlan" "WLAN" "arduino:blue:wlan" "phy0tpt"
ucidef_set_led_usbdev "usb" "USB" "arduino:white:usb" "1-1.1"
;;
ap113|\
db120)
ucidef_set_led_usbdev "usb" "USB" "$board:green:usb" "1-1"
;;

View file

@ -146,7 +146,6 @@ ar71xx_setup_interfaces()
ubnt-unifi-outdoor)
ucidef_set_interface_lan "eth0 eth1"
;;
ap113|\
pb92|\
wzr-hp-g300nh2)
ucidef_add_switch "switch0" \

View file

@ -48,7 +48,6 @@ case "$board" in
dir-825-c1|\
wzr-hp-g300nh2|\
pb92|\
ap113|\
tl-wdr4300|\
tl-wr1041n-v2|\
wrt160nl|\

View file

@ -435,9 +435,6 @@ ar71xx_board_detect() {
*"Arduino Yun")
name="arduino-yun"
;;
*AP113)
name="ap113"
;;
*"AP121 reference board")
name="ap121"
;;

View file

@ -261,7 +261,6 @@ platform_check_image() {
;;
alfa-ap96|\
alfa-nx|\
ap113|\
ap121-mini|\
ap121|\
ap135-020|\

View file

@ -40,7 +40,6 @@ CONFIG_ATH79_MACH_ALL0315N=y
CONFIG_ATH79_MACH_ANTMINER_S1=y
CONFIG_ATH79_MACH_ANTMINER_S3=y
CONFIG_ATH79_MACH_ANTROUTER_R1=y
CONFIG_ATH79_MACH_AP113=y
CONFIG_ATH79_MACH_AP121=y
CONFIG_ATH79_MACH_AP132=y
CONFIG_ATH79_MACH_AP136=y

View file

@ -103,16 +103,6 @@ config ATH79_MACH_ARDUINO_YUN
Say 'Y' here if you want your kernel to support the
Arduino Yun.
config ATH79_MACH_AP113
bool "Atheros AP113 board support"
select SOC_AR724X
select ATH79_DEV_M25P80
select ATH79_DEV_PB9X_PCI if PCI
select ATH79_DEV_GPIO_BUTTONS
select ATH79_DEV_LEDS_GPIO
select ATH79_DEV_USB
select ATH79_DEV_ETH
config ATH79_MACH_AP132
bool "Atheros AP132 reference board"
select SOC_QCA955X

View file

@ -46,7 +46,6 @@ obj-$(CONFIG_ATH79_MACH_ALL0315N) += mach-all0315n.o
obj-$(CONFIG_ATH79_MACH_ANTMINER_S1) += mach-antminer-s1.o
obj-$(CONFIG_ATH79_MACH_ANTMINER_S3) += mach-antminer-s3.o
obj-$(CONFIG_ATH79_MACH_ANTROUTER_R1) += mach-antrouter-r1.o
obj-$(CONFIG_ATH79_MACH_AP113) += mach-ap113.o
obj-$(CONFIG_ATH79_MACH_AP121) += mach-ap121.o
obj-$(CONFIG_ATH79_MACH_AP132) += mach-ap132.o
obj-$(CONFIG_ATH79_MACH_AP136) += mach-ap136.o

View file

@ -1,84 +0,0 @@
/*
* Atheros AP113 board support
*
* Copyright (C) 2011 Florian Fainelli <florian@openwrt.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*/
#include "dev-eth.h"
#include "dev-gpio-buttons.h"
#include "dev-leds-gpio.h"
#include "dev-m25p80.h"
#include "pci.h"
#include "dev-usb.h"
#include "machtypes.h"
#define AP113_GPIO_LED_USB 0
#define AP113_GPIO_LED_STATUS 1
#define AP113_GPIO_LED_ST 11
#define AP113_GPIO_BTN_JUMPSTART 12
#define AP113_KEYS_POLL_INTERVAL 20 /* msecs */
#define AP113_KEYS_DEBOUNCE_INTERVAL (3 * AP113_KEYS_POLL_INTERVAL)
static struct gpio_led ap113_leds_gpio[] __initdata = {
{
.name = "ap113:green:usb",
.gpio = AP113_GPIO_LED_USB,
.active_low = 1,
},
{
.name = "ap113:green:status",
.gpio = AP113_GPIO_LED_STATUS,
.active_low = 1,
},
{
.name = "ap113:green:st",
.gpio = AP113_GPIO_LED_ST,
.active_low = 1,
}
};
static struct gpio_keys_button ap113_gpio_keys[] __initdata = {
{
.desc = "jumpstart button",
.type = EV_KEY,
.code = KEY_WPS_BUTTON,
.debounce_interval = AP113_KEYS_DEBOUNCE_INTERVAL,
.gpio = AP113_GPIO_BTN_JUMPSTART,
.active_low = 1,
},
};
static void __init ap113_setup(void)
{
u8 *mac = (u8 *) KSEG1ADDR(0x1fff0000);
ath79_register_m25p80(NULL);
ath79_register_mdio(0, ~BIT(0));
ath79_init_mac(ath79_eth0_data.mac_addr, mac, 0);
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
ath79_eth0_data.speed = SPEED_1000;
ath79_eth0_data.duplex = DUPLEX_FULL;
ath79_eth0_data.phy_mask = BIT(0);
ath79_register_eth(0);
ath79_register_gpio_keys_polled(-1, AP113_KEYS_POLL_INTERVAL,
ARRAY_SIZE(ap113_gpio_keys),
ap113_gpio_keys);
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap113_leds_gpio),
ap113_leds_gpio);
ath79_register_pci();
ath79_register_usb();
}
MIPS_MACHINE(ATH79_MACH_AP113, "AP113", "Atheros AP113",
ap113_setup);

View file

@ -26,7 +26,6 @@ enum ath79_mach_type {
ATH79_MACH_ANTMINER_S1, /* Antminer S1 */
ATH79_MACH_ANTMINER_S3, /* Antminer S3 */
ATH79_MACH_ANTROUTER_R1, /* Antrouter R1 */
ATH79_MACH_AP113, /* Atheros AP113 reference board */
ATH79_MACH_AP121, /* Atheros AP121 reference board */
ATH79_MACH_AP121_MINI, /* Atheros AP121-MINI reference board */
ATH79_MACH_AP132, /* Atheros AP132 reference board */

View file

@ -4,7 +4,6 @@
# CONFIG_ATH79_MACH_ALL0258N is not set
# CONFIG_ATH79_MACH_ALL0315N is not set
# CONFIG_ATH79_MACH_ANTMINER_S1 is not set
# CONFIG_ATH79_MACH_AP113 is not set
# CONFIG_ATH79_MACH_AP121 is not set
# CONFIG_ATH79_MACH_AP132 is not set
# CONFIG_ATH79_MACH_AP136 is not set

View file

@ -3,7 +3,6 @@
# CONFIG_ATH79_MACH_ALFA_NX is not set
# CONFIG_ATH79_MACH_ALL0258N is not set
# CONFIG_ATH79_MACH_ALL0315N is not set
# CONFIG_ATH79_MACH_AP113 is not set
# CONFIG_ATH79_MACH_AP121 is not set
# CONFIG_ATH79_MACH_AP132 is not set
# CONFIG_ATH79_MACH_AP136 is not set