Commit graph

27863 commits

Author SHA1 Message Date
Felix Fietkau
a44b4e3ffb gcc: backport a fix for issues with accessing weak data references
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41569
2014-07-10 19:28:40 +00:00
Felix Fietkau
7b0ec8a5db octeon: backport a few upstream fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41568
2014-07-10 19:28:37 +00:00
John Crispin
332b4d556f lantiq: generate /tmp/sysinfo/lantiq_board_name if missing
Run lantiq_board_detect from lantiq_board_name and lantiq_board_model.

This was the one thing missing from r41474 for sysupgrade board
detection to work properly.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41567
2014-07-10 19:16:43 +00:00
John Crispin
03fef9a2d2 lantiq: enable SysupgradeNAND for BTHOMEHUBV2B
Enables SysupgradeNAND for BTHOMEHUBV2B.

Depends on the following patches:
http://patchwork.openwrt.org/patch/5817/
http://patchwork.openwrt.org/patch/5848/
http://patchwork.openwrt.org/patch/5851/

Many thanks everyone for your help the last couple of days.

Ben

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41566
2014-07-10 19:16:39 +00:00
John Crispin
4e35eef1d7 lantiq xway: disable gluebi and enable ubiblock
Disables gluebi and enables ubiblock on lantiq xway. Squashfs
images on nand use ubifs instead of jffs2 for the overlay.

I'll leave the equivalent patch for xrx200 to someone who has a
board to test.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41565
2014-07-10 19:16:35 +00:00
John Crispin
72efa88b64 procd: correctly identify ubifs in tar file
A missing path prevents the rootfs type contained in a SysupgradeNAND
tar file from being determined correctly.

This fixes it, and also corrects a minor spelling mistake.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 41564
2014-07-10 19:16:31 +00:00
John Crispin
be26421f45 sysupgrade: Enable killing of all processes under upgraded
If the sysupgrade scripts is called under upgraded, it will not kill all
other processes as it should to avoid interference by locked filesystem.
This patch checks the parent and if it is upgraded, it kills all.

Signed-off-by: André Valentin <avalentin@marcant.net>

SVN-Revision: 41563
2014-07-10 19:16:27 +00:00
John Crispin
f8f6678574 ar71xx: nbg6716: extract ath10k wifi board.bin
With help of this script the ath10k board.bin settings are loaded from
flash and saved to the ath10k firmware directory. The driver reads it
later in the boot process.

Signed-off-by: André Valentin <avalentin@marcant.net>

SVN-Revision: 41562
2014-07-10 19:16:23 +00:00
John Crispin
94802dca60 ralink: wpa does not exist, use wpad-mini instead
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41561
2014-07-10 19:16:19 +00:00
John Crispin
0f76f8a16e target/linux/*: kmod-fs-ext{2,3} RIP
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41560
2014-07-10 19:16:15 +00:00
John Crispin
1aeb77b9ee toolchain: only default eglibc for octeon and not all of mips64
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41559
2014-07-10 19:16:09 +00:00
Jo-Philipp Wich
f4781cae6d firewall: fix segfault introduced by latest update
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 41558
2014-07-10 16:44:20 +00:00
Felix Fietkau
f34cbdcf61 mac80211: Fix config variable name for dtim_period
The vif option dtim_period was accidently renamed dtim_interval in r38988
("netifd: add wireless configuration support and port mac80211 to the new
framework"). This is wrong and makes the dtim_period/dtim_interval a dead
option because the rest of the config generation code still uses dtim_period.

Reported-by: Jeppe Ledet-Pedersen <jlp@steinwurf.com>
Signed-off-by: Sven Eckelmann <sven@narfation.org>

SVN-Revision: 41557
2014-07-10 12:29:27 +00:00
Jo-Philipp Wich
8b0650838d firewall: fix regressions introduced after latest ubus rework
The commit 92281eb747b56e748b7c3d754055919c23befdd4 broke fw3_ubus_addresses() so that
no addresses where returned at all, this caused fw3 to not emit NAT reflection rules
anymore.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 41556
2014-07-10 10:21:17 +00:00
Imre Kaloz
811d1682b8 enable handling of the wan led on the WRT1900AC
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41555
2014-07-10 10:19:06 +00:00
Felix Fietkau
f98306bef4 kernel: revert an upstream linux-stable commit that is causing usb regressions on some brcm47xx and ar71xx devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41554
2014-07-09 10:11:23 +00:00
Luka Perkov
f9c04c8722 kernel: 3.13: refresh patches
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41553
2014-07-08 23:27:45 +00:00
Luka Perkov
82abc5c1d9 kernel: ledtrig-netdev: use netdev_notifier_info
Since kernel 3.11, the third parameter passed to notifier_call()
is of type struct netdev_notifier_info. This patch fixes an oops
when setting a netdev LED trigger.

Signed-off-by: Claudio Leite <leitec@staticky.com>

SVN-Revision: 41552
2014-07-08 23:27:44 +00:00
Luka Perkov
90b53991a0 kernel: update 3.14 to 3.14.11
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41551
2014-07-08 22:44:34 +00:00
Jonas Gorski
8630d101b7 brcm63xx: fixup patches borked by allowing too much fuzz
Move defines and board_info structs back to their proper locations so
(de-)selecting SOC support won't break the build.

Reported-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41550
2014-07-08 12:27:55 +00:00
Felix Fietkau
a6c4ef18b7 qos-scripts: remove maxsize options and packet size based reclassify from the default config
They should be unnecessary with fq_codel, and simplifying rules helps
with performance

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41549
2014-07-08 11:19:51 +00:00
Hauke Mehrtens
0a5145e851 brcm47xx: make reboot a more reliable
A reboot is issued by setting the watchdog timer to a low value, when
the value is decreased from 1 to 0 by the hardware the system will
reboot. Setting this value to 1 does not work every time, it is a
little bit more reliable when setting it to 3. This timer runs with
some MHz or KHz so nobody will notice the increased waiting.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41548
2014-07-07 20:12:40 +00:00
Hauke Mehrtens
f42c36ea60 brcm47xx: add buttons support for Netgear WNR3500L
Ticket: #14406

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41547
2014-07-07 19:14:22 +00:00
Hauke Mehrtens
4632347879 brcm47xx: remove unneeded images from generic target
broadcom-wl now builds in the mips74k profile, so remove these chips
from the generic profile.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41546
2014-07-07 17:47:24 +00:00
Hauke Mehrtens
189edfef1a broadcom-wl: assign first increased mac address to internal wifi core
When the original mac addresses are not valid assign the first one to
the internal wifi core, this matches the manufacture mac address in
most cases. In addition refresh the patches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41545
2014-07-07 17:38:54 +00:00
Felix Fietkau
8a792ca2bb rb532: remove broken mark
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41544
2014-07-07 08:52:06 +00:00
Felix Fietkau
075249997f rb532: add wan interface
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41543
2014-07-07 08:52:02 +00:00
Felix Fietkau
9a4ba281f6 rb532: fix jffs2 images
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41542
2014-07-07 08:51:59 +00:00
Felix Fietkau
d4158338c9 rb532: really fix squashfs images
The previous attempt (r40717) to fix squashfx made the system bootable but
overlayfs remained broken.
This enables block2mtd again using the right partition number and naming
and adds MTD_ROOTFS_SPLIT option.
However onboard rootfs partition name had to be renamed to place overlay on
CF instead of onboard NAND.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 41541
2014-07-07 08:51:55 +00:00
Felix Fietkau
ecd169b2c6 broadcom-wl: disable mips16 support, fixes build
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 41540
2014-07-07 08:29:35 +00:00
Hauke Mehrtens
e63318d6d5 kernel: do not build kernel modules by default
No config option should be set to m in the default config, because
there is also some script needed which picks the module up into the
image and that is missing this way. Always create a kmod when building
a module.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41539
2014-07-06 22:34:24 +00:00
Hauke Mehrtens
2518f83f6e mpc83xx: add support for kernel 3.10
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41538
2014-07-06 22:23:53 +00:00
Hauke Mehrtens
deee38e709 mpc52xx: add support for kernel 3.10
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41537
2014-07-06 22:05:09 +00:00
Hauke Mehrtens
157cf7e582 au1000: add support for kernel 3.10
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41534
2014-07-06 18:20:59 +00:00
Luka Perkov
354a1042cc kernel: update 3.14 to 3.14.10
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 41533
2014-07-06 18:10:49 +00:00
Jonas Gorski
ce0f954947 ar7: enable the low-memory feature flag
Most ar7 devices have only 16 MiB RAM, so select low_mem to give them
a chance to work.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 41532
2014-07-06 18:09:30 +00:00
Hauke Mehrtens
3f78cadedd gemini: add support for kernel 3.10
This is compile tested only, please run test and report back.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41531
2014-07-06 17:51:14 +00:00
Hauke Mehrtens
3597b7d456 brcm47xx: image: legacy: take over old devices images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41530
2014-07-06 17:21:37 +00:00
Hauke Mehrtens
0eb3c26e7d brcm47xx: image: mips74k: take over some device images
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41529
2014-07-06 17:14:29 +00:00
Hauke Mehrtens
c3b3df1da8 brcm47xx: image: prepare for using mips74k subtarget
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41528
2014-07-06 17:14:06 +00:00
Hauke Mehrtens
df8741f92b brcm47xx: fix bcm4705 rebooting when initializing the switch.
When the Ethernet controller is powered down and someone wants to
access the mdio bus like the witch driver (b53) the system crashed if
PCI_D3hot was set before. This patch deactivates this power sawing mode
when a switch driver is in use.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41527
2014-07-06 13:45:43 +00:00
Hauke Mehrtens
ed0dc1c97e b53: hardcode reset GPIO for Linksys WRT300N 1.1
According to the thread https://forum.openwrt.org/viewtopic.php?id=48281
b53 uses GPIO 7:
[    4.470000] b53_common: [DBG] b53_switch_reset_gpio using 7
and causes device to self-reboot. GPIO 8 was found in CFE boot log:
"Reset switch via GPIO 8 ..."

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 41526
2014-07-06 11:40:51 +00:00
Hauke Mehrtens
3861bdad99 samba36: update to minor version 3.6.24
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41525
2014-07-06 11:23:13 +00:00
Hauke Mehrtens
5d96f266c9 mac80211: b43: add support for firmware 784.2
This adds firmware 784.2 for b43 as an option.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41524
2014-07-06 10:58:14 +00:00
Hauke Mehrtens
37518a7c53 mac80211: update linux-firmware
This updates linux-firmware to version
7f388b4885cf64d6b7833612052d20d4197af96f from 2014-06-04.
In addition it adds new firmware for Intel, Broadcom and Realtek devices.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41523
2014-07-06 10:34:34 +00:00
Hauke Mehrtens
ce3fb94567 cns21xx: make patch apply again
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41522
2014-07-05 23:36:05 +00:00
Hauke Mehrtens
7f2f585c13 kernel: add missing config options
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41521
2014-07-05 23:35:36 +00:00
Hauke Mehrtens
356663cdc8 brcm47xx: add LEDs for Netgear WNR3500L
https://dev.openwrt.org/ticket/14406

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41520
2014-07-05 23:25:26 +00:00
Hauke Mehrtens
d6c7ab2358 broadcom-wl: improve setting leddc
Use leddc value from other routers and improve the script.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41519
2014-07-05 23:24:41 +00:00
Hauke Mehrtens
4ec8908669 broadcom-wl: fix led support
Some devices have an nvram setting, which make broadcom-wl turn of the
led all the time. When the driver is switched on and we find such a
setting we replace it with a better value.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 41518
2014-07-05 22:55:40 +00:00