KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
21474 commits 1 branch 0 tags 154 MiB
Commit graph

8679 commits

Author SHA1 Message Date
Florian Fainelli
0028429dfa set a compatible command-line to boot from flash 
SVN-Revision: 33078
 2012-08-10 07:04:16 +00:00
Gabor Juhos
5dd996bc2a generic: rtl8366_smi: increase delay after switch hw reset 
SVN-Revision: 33077
 2012-08-10 06:32:00 +00:00
Jo-Philipp Wich
c8a0166212 Fix hard reset of alix/soekris hardware under heavy NIC load 
The following patch corrects a hard reset that occurs on alix and
soekris net5501 hardware. Specifically, this is an issue with the via
rhine NIC driver. Under periods of extreme load, the via rhine driver
can cause a reset of the entire system. When this happens no output is
seen on the console, the device simply reboots. This was reported in the
following ticket:

Consistent crash on Soekris NET5501
https://dev.openwrt.org/ticket/11882

I was able to reproduce the problem locally with numerous alix 2d13
platforms. Under heavy 64 byte frame size load from a Smartbits traffic
generator, the alix hardware will hard reset in under 5 minutes. The
same hardware, under the same load, on FreeBSD 9.0 does not reset.

The patch below backports most of the via rhine changes from kernel 3.5.
With OpenWrt trunk being on kernel 3.3.8, it seemed prudent to bring
these changes in to avoid this serious issue.

I've tested this heavily in my test environment and was able to keep the
device stable under load for extended periods of time without any resets.

Also, a nice side effect of this change is that it significantly raises
the performance the platform. Without this patch the alix 2d13 can move
approximately 29,000 packets per second at 64 byte frame sizes. After
this patch the alix can move 52,000 packets per second at 64 byte frame
sizes.

I put this patch under the x86 patches as those are the only platforms
with via rhine hardware that I'm aware of. If it needs to go some place
else please let me know.

Thanks,
Adam

Signed-off-by: Adam Gensler <openwrt@kristenandadam.net>

SVN-Revision: 33072
 2012-08-09 09:41:22 +00:00
Florian Fainelli
47380a4388 nuport-mac: use dma_mapping_error() instead of checking pointers 
Thanks Gabor for spotting this

SVN-Revision: 33071
 2012-08-09 09:06:35 +00:00
Florian Fainelli
7f9bfa3fcd nuport-mac: rework PHY interrupt configuration to avoid races 
SVN-Revision: 33070
 2012-08-08 21:51:18 +00:00
Florian Fainelli
5e877f02b4 nuport-mac: close possible race condition during start 
SVN-Revision: 33069
 2012-08-08 21:51:13 +00:00
Florian Fainelli
35351a28b9 nuport-mac: unmap the DMA buffer when closing device 
SVN-Revision: 33068
 2012-08-08 21:51:09 +00:00
Florian Fainelli
b77494fa2f nuport-mac: check dma_map_single address return values 
SVN-Revision: 33067
 2012-08-08 21:51:04 +00:00
Florian Fainelli
798cc28d73 build a Devolo dLAN USB Extender specific image 
The kernel has to be rounded up to the nearest 1MB, then we append
the root filesystem at its end.

SVN-Revision: 33066
 2012-08-08 21:51:00 +00:00
Florian Fainelli
f8386ecbc6 cleanup image generation 
SVN-Revision: 33065
 2012-08-08 21:50:55 +00:00
John Crispin
64b385dda7 pci gpio mapping 
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 33054
 2012-08-08 12:14:43 +00:00
Jonas Gorski
4feeda756e bcm63xx: fix USB base registers and IRQs for BCM6328 
SVN-Revision: 33005
 2012-08-05 23:18:22 +00:00
Hauke Mehrtens
a0fb060211 update tg3 driver 
SVN-Revision: 33004
 2012-08-05 20:27:40 +00:00
Hauke Mehrtens
35661401da generate image for Linksys e3200 
SVN-Revision: 33003
 2012-08-05 13:14:00 +00:00
Hauke Mehrtens
a71f347c30 brcm47xx: update gpio patch 
SVN-Revision: 33001
 2012-08-05 12:40:05 +00:00
Hauke Mehrtens
1d40a652ee brcm47xx: fix patch which moves the flash struct in wgt634u code 
SVN-Revision: 33000
 2012-08-05 12:39:15 +00:00
John Crispin
5f438c3565 W502V/ARV4525 wireless mac bugfix 
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 32993
 2012-08-04 20:14:52 +00:00
Hauke Mehrtens
0758996824 brcm47xx: use libgpio instaed of implementing the gpio interface ourself. 
SVN-Revision: 32992
 2012-08-04 19:46:25 +00:00
John Crispin
060b161ca6 cleanup patches 
SVN-Revision: 32953
 2012-08-03 08:53:02 +00:00
Florian Fainelli
162e272b4b nuport-mac: properly protect the phy interrupt handler 
SVN-Revision: 32951
 2012-08-02 18:13:17 +00:00
John Crispin
f45132d1d4 Codel: avoid a nul rec_inv_sqrt 
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.

codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.

Brought over from 3.5-stable

Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>

SVN-Revision: 32950
 2012-08-02 13:39:50 +00:00
John Crispin
c2d3274ffc fixes i2c clock enable 
SVN-Revision: 32949
 2012-08-02 13:29:49 +00:00
Gabor Juhos
e320a7e649 ar71xx: simplify misc IRQ handling 
SVN-Revision: 32948
 2012-08-02 11:25:49 +00:00
Gabor Juhos
3e1e52a524 ar71xx: fix AR934X_EHCI_SIZE 
SVN-Revision: 32947
 2012-08-02 11:25:46 +00:00
Gabor Juhos
b873051706 ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND 
SVN-Revision: 32946
 2012-08-02 09:54:41 +00:00
Gabor Juhos
e29d6bec6f ar71xx: image: allow to use board specific code in the lzma-loader 
SVN-Revision: 32945
 2012-08-02 09:54:33 +00:00
Gabor Juhos
79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board 
SVN-Revision: 32944
 2012-08-02 09:54:28 +00:00
Gabor Juhos
e2782eae8e generic: rtl836x: add hw_reset field to struct rtl8366_smi 
It will be used to start/stop the switch if that is
supported by the given board.

SVN-Revision: 32943
 2012-08-02 09:54:21 +00:00
Gabor Juhos
614ca3cc9e generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls 
SVN-Revision: 32942
 2012-08-02 09:54:13 +00:00
Florian Fainelli
9f011e7225 add missing netmask to the network config 
SVN-Revision: 32941
 2012-08-01 22:09:13 +00:00
Florian Fainelli
5133a44785 assume the link is up and full-duplex by default 
SVN-Revision: 32940
 2012-08-01 21:56:54 +00:00
Florian Fainelli
56aac45139 add a default and suitable network config file 
SVN-Revision: 32939
 2012-08-01 21:56:49 +00:00
Gabor Juhos
563400ef10 ar71xx: ew-dorin: added router firmware generation 
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
 2012-08-01 12:24:57 +00:00
Gabor Juhos
8eabe64e6b ar71xx: ew-dorin: added USB support 
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32933
 2012-08-01 12:24:56 +00:00
Gabor Juhos
1af4fd7660 ar71xx: Buffalo WLAE-AG300N wireless led patch 
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32932
 2012-08-01 12:24:54 +00:00
Gabor Juhos
010aec0619 ar71xx: Buffalo WLAE-AG300N initial support 
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
 2012-08-01 12:24:52 +00:00
Florian Fainelli
df48d71d72 resync defconfig enable XZ compression 
SVN-Revision: 32930
 2012-08-01 12:01:27 +00:00
Florian Fainelli
3cd753408d properly generate squashfs, jffs2 and initramfs images and kernels 
SVN-Revision: 32927
 2012-07-31 23:09:50 +00:00
Florian Fainelli
c0561a42e7 disable crashlog on ARM platforms for the moment 
It is currently badly broken on ARM, until fixed, disable it

SVN-Revision: 32926
 2012-07-31 23:09:46 +00:00
John Crispin
f5f36911f0 add lantiq svip support 
SVN-Revision: 32925
 2012-07-31 18:49:54 +00:00
Jonas Gorski
07c4524d33 bcm63xx: Add nb6 support (BCM6362 SoC base boards) 
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]

SVN-Revision: 32924
 2012-07-31 14:27:47 +00:00
Jonas Gorski
820c224029 bcm63xx: add basic bcm6362 support 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32923
 2012-07-31 14:27:42 +00:00
Jonas Gorski
dcd339ac9d bcm63xx: enable usb for bcm6328 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32922
 2012-07-31 14:27:34 +00:00
Jonas Gorski
94d257a851 bcm63xx: update enetswitch driver 
Update enetswith driver with latest fixes and additions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32921
 2012-07-31 14:27:31 +00:00
Jonas Gorski
fa75bd977a bcm63xx: reorder patches 
Fix the order and names of patches.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32920
 2012-07-31 14:27:25 +00:00
Florian Fainelli
d1ab4df0d6 move i2c module to target modules.mk 
SVN-Revision: 32910
 2012-07-29 13:20:51 +00:00
Florian Fainelli
a5738c960a resync config 
SVN-Revision: 32908
 2012-07-29 13:20:39 +00:00
Florian Fainelli
17244dea00 use the same description as other omap platforms (without the dash) 
SVN-Revision: 32907
 2012-07-29 13:20:35 +00:00
John Crispin
ee0946a5f4 refresh pwm patch 
SVN-Revision: 32905
 2012-07-29 11:53:06 +00:00
John Crispin
101766fb00 clean up pwm patches and drivers 
SVN-Revision: 32901
 2012-07-28 20:47:08 +00:00
Hauke Mehrtens
f0fe59648a add config option CONFIG_I2C_MV64XXX to fix kirkwood build 
SVN-Revision: 32898
 2012-07-28 11:36:52 +00:00
Florian Fainelli
67891c26ec resync config 
SVN-Revision: 32895
 2012-07-27 15:35:15 +00:00
Florian Fainelli
a4d699ccf0 fix DVA-G3810BN image generation 
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32894
 2012-07-27 15:35:12 +00:00
Florian Fainelli
c6813d33f3 add D-link DVA-G3810BN-TL-1 support 
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32893
 2012-07-27 15:35:09 +00:00
Florian Fainelli
18206793b2 Add CT6376-1 board support 
Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32892
 2012-07-27 15:35:05 +00:00
Florian Fainelli
4acdbb1d87 Add brcmsmac profile 
Add brcmsmac profile (kmod-brcmsmac + wpad-mini).

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32890
 2012-07-27 15:34:57 +00:00
John Crispin
0ba7b18cfd Add leds back after migration to sysfs 
atheros trunk moved to full sysfs gpiolib, but the leds were forgotten.
This restores the wlan led that was missing after switching from backfire
to trunk.

Signed-off-by: Karl Palsson <karlp@remake.is>

SVN-Revision: 32885
 2012-07-26 17:06:55 +00:00
Florian Fainelli
46611b2cbf add more missing config symbols 
SVN-Revision: 32884
 2012-07-26 17:03:08 +00:00
Florian Fainelli
ac30beaaa7 add more USB-related config symbols 
SVN-Revision: 32883
 2012-07-26 17:03:05 +00:00
Florian Fainelli
a077e785cf make sure target modules depend on the target 
SVN-Revision: 32882
 2012-07-26 17:03:02 +00:00
Hauke Mehrtens
0c75abf527 bcma: update to version from wireless-testing tag master-2012-07-16 
I did not add the last patch, because it add some stubs for the flash drivers and our patches have to be changed for that, if the flash support in bcma is able to do something I will integrate it.

This also contains 3 additional patches fixing some bugs in bcma.

SVN-Revision: 32880
 2012-07-26 15:42:18 +00:00
John Crispin
87a72d68f1 fix typo in modules.mk 
This patch fixes a small typo in kmod-leds-wndr3700-usb description, where the board is for some reason made by NETGWR, not NETGEAR.

Signed-off-by: Roman A. aka BasicXP <x12ozmouse@ya.ru>

SVN-Revision: 32870
 2012-07-25 19:52:30 +00:00
Florian Fainelli
d359d46182 make kmod-fb dependent on DISPLAY_SUPPORT and update targets accordingly 
SVN-Revision: 32869
 2012-07-25 19:36:19 +00:00
Florian Fainelli
adc2b21be8 move isp116x driver to target specific modules.mk 
SVN-Revision: 32865
 2012-07-25 15:50:45 +00:00
Florian Fainelli
1627b2bb4b move rt305x-dwc driver to target specific modules.mk 
SVN-Revision: 32864
 2012-07-25 15:50:42 +00:00
Florian Fainelli
c7a69869f7 move ubsec-ssb driver to target specific modules.mk 
SVN-Revision: 32863
 2012-07-25 15:50:38 +00:00
Florian Fainelli
d1b2087a35 move ssb-gige to target specific modules.mk 
SVN-Revision: 32862
 2012-07-25 15:50:36 +00:00
Florian Fainelli
c14d907b8b move usb driver to target specific modules.mk 
SVN-Revision: 32861
 2012-07-25 15:50:33 +00:00
Florian Fainelli
3b5a8548f4 move mmc driver to target specific modules.mk 
SVN-Revision: 32859
 2012-07-25 15:50:26 +00:00
Florian Fainelli
18038c803c move ixp4xx-eth to target specific modules.mk 
SVN-Revision: 32858
 2012-07-25 15:50:23 +00:00
Florian Fainelli
4000de357e move crypto module to target specific modules.mk 
SVN-Revision: 32856
 2012-07-25 15:50:16 +00:00
Florian Fainelli
a282e37c09 move i2c driver to target modules.mk 
SVN-Revision: 32855
 2012-07-25 15:50:13 +00:00
Florian Fainelli
accbc20045 move watchdog driver to target specific modules.mk 
SVN-Revision: 32854
 2012-07-25 15:50:10 +00:00
Florian Fainelli
23ffbad602 move target specific spi modules 
SVN-Revision: 32853
 2012-07-25 15:50:04 +00:00
Florian Fainelli
1859500829 move target specific leds modules to ar71xx modules.mk 
SVN-Revision: 32852
 2012-07-25 15:50:02 +00:00
Florian Fainelli
c3b9a987b7 move leds modules back to target modules.mk 
SVN-Revision: 32851
 2012-07-25 15:49:57 +00:00
Florian Fainelli
bca45d6d8a move i2c modules back to target modules.mk 
SVN-Revision: 32850
 2012-07-25 15:49:54 +00:00
Florian Fainelli
2bfb2a797c move more x86-specific modules back to target modules.mk 
SVN-Revision: 32848
 2012-07-25 15:49:49 +00:00
Florian Fainelli
d973768580 move x86 specific ide/pata modules to x86' modules.mk 
SVN-Revision: 32846
 2012-07-25 15:49:42 +00:00
Hauke Mehrtens
e0837a51f0 brcm47xx: reorder patches so that the patches already in mainline linux will be applied at first. 
SVN-Revision: 32845
 2012-07-25 14:52:00 +00:00
Florian Fainelli
ab2cb9ce61 add yet another framebuffer symbol 
SVN-Revision: 32844
 2012-07-25 14:01:57 +00:00
Florian Fainelli
89a312bf48 split framebuffer helper modules to their own packages 
SVN-Revision: 32843
 2012-07-25 14:01:54 +00:00
Florian Fainelli
ba9f6a46b1 remove broken flag 
SVN-Revision: 32842
 2012-07-25 14:01:51 +00:00
Florian Fainelli
03c06178e3 package buttons driver separately 
SVN-Revision: 32841
 2012-07-25 14:01:49 +00:00
Florian Fainelli
83b7462ac9 package cobalt lcd as a module 
SVN-Revision: 32840
 2012-07-25 14:01:46 +00:00
John Crispin
7ee4798be2 add unset CONFIG_FB_XGI to fix fullbuilds 
SVN-Revision: 32836
 2012-07-25 09:05:23 +00:00
John Crispin
94a550cc87 cleanup config-3.3, remove =m 
SVN-Revision: 32835
 2012-07-25 09:05:18 +00:00
John Crispin
1cbfa0c0f5 laguna: fix eeprom read buffer size during platform configuration 
Increase the size of the buffer used for eeprom reads during the platform configuration of the Gateworks laguna.  The model name read in is 16 bytes but the original buffer was only 8 bytes.

Signed-off-by: David Acker <dacker@rajant.com>

SVN-Revision: 32833
 2012-07-25 08:01:38 +00:00
John Crispin
0e9e7dcd10 adds target used by rapsberry pi 
Add support for Raspberry Pi / brcm2708 / 2835

Signed-off-by: Ian Ridge <ianridge [at] gmail.com>

SVN-Revision: 32825
 2012-07-24 20:39:17 +00:00
John Crispin
5e52619b76 DWC otg usb: compilation fixes and trivial bugfix in slave mode 
Signed-of-by: Nikolai Zhubr <n-a-zhubr@yandex.ru>

SVN-Revision: 32823
 2012-07-24 20:38:55 +00:00
John Crispin
799d6deab0 D-Link DAP-1350 initial support 
The initial support for the D-Link DAP-1350.
USB related functionality is not tested.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32821
 2012-07-24 20:38:43 +00:00
John Crispin
b891eec700 MI424WR - add rev D support 
Add support for revision D of the MI424WR.
Rev D swaps LAN & WAN ports so this patch maintains
eth0 for LAN and eth1 for WAN. For details on rev D usage,
see http://wiki.openwrt.org/toh/actiontec/mi424wr

Signed-off-by: Jose Vasconcellos <jvasco@verizon.net>

SVN-Revision: 32820
 2012-07-24 20:38:36 +00:00
John Crispin
03be8d08ac initial LED configuration for Fonera 2.0n 
Setup initial configuration for Wifi and USB LEDS of a Fonera 2.0n (ramips)

Signed-off-by: Malte Forkel <malte.forkel@berlin.de>

SVN-Revision: 32819
 2012-07-24 20:38:31 +00:00
John Crispin
2d2479a033 add ALL5002 userspace support 
detect EEPROM, MAC addresses and support sysupgrade for the ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32816
 2012-07-24 20:38:14 +00:00
John Crispin
e219c3ac3a enable OHCI/EHCI glue on Rt305x, so it is available for Rt3352F. 
Hope that this works, didn't have a chance to actually test it...

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32815
 2012-07-24 20:38:08 +00:00
John Crispin
a65eee9ac3 add image build for ALL5002 
add image build for ALL5002

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32814
 2012-07-24 20:38:03 +00:00
John Crispin
0a08a776fb add support for Allnet ALL5002 to kernel 
support ALL5002 in ramips/rt305x branch of the kernel.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32813
 2012-07-24 20:37:56 +00:00
John Crispin
6641024f50 uart_clk on Rt3352F is always 40MHz 
Currently, sys_clk/10 is used which is just wrong.
cpu_clk/10 would work for systems with 400MHz CPU clock.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32812
 2012-07-24 20:37:50 +00:00
Florian Fainelli
93dc8c8d1b move omap specific modules to modules.mk 
SVN-Revision: 32810
 2012-07-24 19:43:54 +00:00
Florian Fainelli
82c7e05d42 move n810 battery module to omap24 modules.mk 
SVN-Revision: 32809
 2012-07-24 19:43:49 +00:00
Florian Fainelli
25e20b0b57 move target specific modules to target's module.mk 
SVN-Revision: 32808
 2012-07-24 19:43:45 +00:00
Florian Fainelli
587f85ac20 package ep93xx framebuffer 
SVN-Revision: 32807
 2012-07-24 19:43:35 +00:00
Florian Fainelli
5915c85d80 remove crypto symbols override 
SVN-Revision: 32806
 2012-07-24 19:43:31 +00:00
Florian Fainelli
c238862651 add missing framebuffer related symbols 
SVN-Revision: 32804
 2012-07-24 19:43:23 +00:00
Florian Fainelli
9f55e6f954 remove broken flag, since it works 
SVN-Revision: 32803
 2012-07-24 19:43:19 +00:00
Florian Fainelli
c531ce0301 fix sound modules loading order and dependencies 
SVN-Revision: 32802
 2012-07-24 19:43:15 +00:00
Florian Fainelli
598ef2a2e0 package ep93xx touchscreen driver as a module 
SVN-Revision: 32799
 2012-07-24 19:42:49 +00:00
Florian Fainelli
0db5f35846 set DEVICE_TYPE to developerboard 
SVN-Revision: 32798
 2012-07-24 19:42:44 +00:00
John Crispin
5178c177dc rebase config-3.3 
SVN-Revision: 32797
 2012-07-24 17:28:25 +00:00
John Crispin
53a6946bb4 fix tantos patch properly 
SVN-Revision: 32796
 2012-07-24 17:28:12 +00:00
John Crispin
6fe32d72a2 make tantos switch select ETHERNET_PACKET_MANGLE 
SVN-Revision: 32795
 2012-07-24 16:50:14 +00:00
John Crispin
48869ef7c0 move CONFIG_ETHERNET_PACKET_MANGLE to a generic config file 
This broke falcon builds

SVN-Revision: 32794
 2012-07-24 15:33:01 +00:00
Felix Fietkau
b59bc92c6e crashlog: fix dependency, add memblock support 
SVN-Revision: 32787
 2012-07-22 16:39:33 +00:00
Felix Fietkau
b1f318de53 kernel: fix portability issues on the x86 specific relocs host tool, fixes build on mac os x 
SVN-Revision: 32783
 2012-07-20 12:28:50 +00:00
Florian Fainelli
05340cc602 rename upgrade image to sysupgrade.bin for consistency 
SVN-Revision: 32770
 2012-07-17 16:47:57 +00:00
Florian Fainelli
d243c1e1f2 add missing configuration symbols 
SVN-Revision: 32769
 2012-07-17 16:40:28 +00:00
Florian Fainelli
f7dfd20f97 au1000: implement sysupgrade platform.sh 
Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 32768
 2012-07-17 16:40:24 +00:00
Florian Fainelli
ac6bf6d62f au1000: clean up profiles 
Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 32767
 2012-07-17 16:39:52 +00:00
Florian Fainelli
b2d76e1e05 au1000: fix InternetBox idsel and remove broken flag 
The following patch is necessary for the InternetBox (Surfbox) board-specific
idsel to work with newer kernels. Acutally I don't exactly understand why this
was not necessary before, but without the udelay, the MiniPCI adapter in slot 3
is not detected and set up correctly.

Also remove platform broken flag, it works.

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 32766
 2012-07-17 16:39:47 +00:00
Gabor Juhos
21de1b9d85 ar71xx: enable I2C_GPIO, the PB44 board needs that 
SVN-Revision: 32738
 2012-07-15 17:52:52 +00:00
Gabor Juhos
7daf851adf ar71xx: fix PB44 board detection 
SVN-Revision: 32737
 2012-07-15 17:52:50 +00:00
Gabor Juhos
c7fa38484c ar71xx: use gpio_set_value_cansleep on sleeping GPIOs in ath79_spi 
SVN-Revision: 32736
 2012-07-15 17:52:48 +00:00
Luka Perkov
03a6d65c37 kernel: add Marvell SoC built-in RTC to modules 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 32732
 2012-07-15 14:25:30 +00:00
Florian Fainelli
c727c2aacf set DEVICE_TYPE to other to avoid pulling unecessary packages 
SVN-Revision: 32731
 2012-07-15 14:10:03 +00:00
Florian Fainelli
a5d72815b5 add compatible property to pci node 
SVN-Revision: 32730
 2012-07-15 14:09:40 +00:00
Florian Fainelli
b5578d83d5 use ohci_err() instead of err() 
SVN-Revision: 32729
 2012-07-15 14:09:32 +00:00
Florian Fainelli
0e0b396663 make sure we properly unmap DMA mappings we created 
SVN-Revision: 32728
 2012-07-15 14:09:24 +00:00
Florian Fainelli
0f0e42f28e nuport-mac: add definitions of the various bits/masks used 
SVN-Revision: 32727
 2012-07-15 14:09:18 +00:00
Luka Perkov
c89e87d186 kirkwood: add support for seagate goflexnet and goflexhome 
Signed-off-by: Martin Mueller <mm@sig21.net>

SVN-Revision: 32725
 2012-07-15 12:18:29 +00:00
Luka Perkov
952ce3473d kirkwood: revert config changes from r32053 
SVN-Revision: 32719
 2012-07-15 00:08:52 +00:00
Gabor Juhos
33220828dc ar71xx: build firmware image for the TP-Link TL-WDR4310 v1.0 
The hardware for TP-Link TL-WDR4300 v1.1 and TL-WDR4310 v1.0 is
identical, but requires different firmware headers:

TL-WDR4300:
00000040  43 00 00 01 00 00 00 01  00 00 00 00 76 fb 83 40  |C...........v..@|

TL-WDR4310:
00000040  43 10 00 01 00 00 00 01  00 00 00 00 38 2b 50 6c  |C...........8+Pl|

[juhosg: change commit message, use a different model name]

Signed-off-by: Stefan Lippers-Hollmann <s.l-h@gmx.de>

SVN-Revision: 32683
 2012-07-12 13:38:40 +00:00
Gabor Juhos
372945185d ramips: rt305x: add support for Edimax 3G-6200N 
Support for Edimax 3G-6200N router with USB.

Signed-off-by: Lukasz Golebiowski <lgolebio@gmail.com>

SVN-Revision: 32682
 2012-07-12 13:29:46 +00:00
Gabor Juhos
e9af340016 generic: ocf: restore terminating entry of pci_id_table in hifnHIPP 
SVN-Revision: 32680
 2012-07-12 08:34:23 +00:00
Gabor Juhos
d3c8852fd1 ar71xx: select ATH79_DEV_M25P80 for the WRT400N board 
SVN-Revision: 32679
 2012-07-12 08:34:22 +00:00
Gabor Juhos
c75c895d24 ar71xx: airrouter power led support 
This patch adds support for power led to Unifi Airrouter AP.

[juhosg:fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32678
 2012-07-12 08:34:21 +00:00
Gabor Juhos
466f010303 ar71xx: unifi reset button support 
This patch adds support for reset button to Ubiquiti UniFi AP.

[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32677
 2012-07-12 08:34:20 +00:00
Gabor Juhos
5ce9c90ca8 ar71xx: airrouter reset button support 
This patch adds support for reset button to Ubiquiti Airrouter AP.

[juhosg: fold the patch into 608-MIPS-ath79-ubnt-xm-add-more-boards.patch]

Signed-off-by: Rocco Folino <lordzen@autistici.org>

SVN-Revision: 32676
 2012-07-12 08:34:18 +00:00
Luka Perkov
283021ac15 ocf: update to version 20120127 
SVN-Revision: 32672
 2012-07-11 23:38:14 +00:00
Hauke Mehrtens
45d55161a6 kernel: bcma: update to version from wireless-testing tag master-2012-07-11 
SVN-Revision: 32670
 2012-07-11 22:17:05 +00:00
Florian Fainelli
b94d9eb302 remove bcm63xx_pci_register() call in livebox board 
SVN-Revision: 32661
 2012-07-11 09:15:26 +00:00
Florian Fainelli
f8446c3d4c use physmap-flash on livebox (#8677) 
SVN-Revision: 32660
 2012-07-11 09:15:22 +00:00
Florian Fainelli
8765e49fbe nuport-mac: check netif_receive_skb() return value 
We did not reassign status to netif_receive_skb() return value, we thus
almost always incremented the dropped counter because the descriptor status
value never matches the NET_RX_DROP.

SVN-Revision: 32659
 2012-07-11 08:29:01 +00:00
Florian Fainelli
93bf00ff36 fix typo on of_node_put() 
SVN-Revision: 32653
 2012-07-09 14:44:15 +00:00
Florian Fainelli
bb1488e5e7 Detect alternative "cfe-" version bootloaders (found in 963281T_TEF board) 
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32643
 2012-07-06 22:10:37 +00:00
Gabor Juhos
fe015f399f ar71xx: swizzle address for PCI byte/word access on AR71xx 
Closes #11683.

SVN-Revision: 32639
 2012-07-06 16:33:12 +00:00
Gabor Juhos
b39df5bb81 ar71xx: select SOC_AR933X and ATH79_DEV_WMAC for the OM2P board 
SVN-Revision: 32638
 2012-07-06 11:12:02 +00:00
Gabor Juhos
e258367c19 ar71xx: merge new board patches into the generic patch 
SVN-Revision: 32637
 2012-07-06 11:12:01 +00:00
Gabor Juhos
b020a7e7c3 ar71xx: OM2P LC sysupgrade patch 
Signed-off-by: Marek Lindner <lindner_marek@yahoo.de>

SVN-Revision: 32635
 2012-07-06 11:11:58 +00:00
Florian Fainelli
110fd3525a call of_node_put() on ethernet node 
SVN-Revision: 32628
 2012-07-05 18:46:55 +00:00
Florian Fainelli
a8fab2cb78 fix EPHY clock bit definition after r32489 
SVN-Revision: 32627
 2012-07-05 18:46:52 +00:00