KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
23473 commits 1 branch 0 tags 154 MiB
Commit graph

23473 commits

This branch
This branch
All branches
Author SHA1 Message Date
Jo-Philipp Wich
8c7ed1cb7b firewall3: update to git head 
* Fixes compilation against eglibc
 * Fixes tracking logic when selectively restarting IPv4 or IPv6 firewall
 * Fixes tracking logic for user chains by differentiating between reloads and restarts
 * Introduces per-zone user chains {input,output,forwarding,prerouting,postrouting}_$zone_rule
 * Supports legacy "tcpudp" protocol notation again

SVN-Revision: 35969
 2013-03-11 20:52:20 +00:00
Gabor Juhos
14ca5fc98b ar71xx: om2p-hs: use correct bit mask to disable JTAG functionality 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35966
 2013-03-11 19:52:54 +00:00
Gabor Juhos
72fc0c1906 ar71xx: add AR934X_GPIO_FUNC_* defines 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35965
 2013-03-11 19:52:51 +00:00
Gabor Juhos
44cc1507e9 ar71xx: makefile changes to build image for MR3420v2 
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3440/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35964
 2013-03-11 15:55:25 +00:00
Gabor Juhos
55e2ae7452 firmware-utils/mktplinkfw: Add support for MR3420v2 
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3441/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35963
 2013-03-11 15:55:23 +00:00
Gabor Juhos
2998abab7c ar71xx: add user-space support for MR3420v2 
Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3442/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35962
 2013-03-11 15:55:22 +00:00
Gabor Juhos
902dd27383 ar71xx: add kernel support for MR3420v2 
[juhosg: use gpio_request_one to enable the USB power]

Patch-by: Dmytro <dioptimizer@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@opewrt.org>

SVN-Revision: 35961
 2013-03-11 15:55:20 +00:00
Gabor Juhos
5c5e1c0a9d ar71xx: enabling control GPIO14 and GPIO15 on MR3040/MR11U 
LAN1 and LAN2 LEDs not present (it pulled to ground via
resistors) on MR3040 and MR11U devices. This little patch
enabling ability to control GPIO14 and GPIO15.

Patch-by: Dmytro <dioptimizer@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3439/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35960
 2013-03-11 15:55:19 +00:00
Gabor Juhos
257bfc21af ar71xx: add profile support for dir-835-a1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3427/mbox/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35959
 2013-03-11 15:55:17 +00:00
Gabor Juhos
3fa3cbae7c ar71xx: add user space support for dir-835-a1 
Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3425/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35958
 2013-03-11 15:55:15 +00:00
Gabor Juhos
a7525f5f5d ar71xx: add kernel support for dir-835-a1 
[juhosg:
  - remove custom mdio bus info and platform data for ar8327, clear the
    .led_cfg field from dir835a1_setup instead,
  - remove arguments of dir835c1_generic_setup function, register the
    LEDs directly from the board specific setup instead]

Signed-off-by: Alexander Stadler <sa.maillists@univie.ac.at>
Patchwork: http://patchwork.openwrt.org/patch/3426/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35957
 2013-03-11 15:55:13 +00:00
Felix Fietkau
bd6c9d6252 cns3xxx: ethernet - clean the tx ring before refilling the rx ring to reduce memory pressure 
SVN-Revision: 35953
 2013-03-11 02:29:53 +00:00
Felix Fietkau
d7a529709a cns3xxx: ethernet - clean the tx ring only in the poll function, not in the xmit handler 
SVN-Revision: 35952
 2013-03-11 02:29:47 +00:00
Felix Fietkau
0d13baff1e cns3xxx: increase number of ethernet driver rx buffers 
SVN-Revision: 35951
 2013-03-10 21:59:32 +00:00
Felix Fietkau
ee2b511e1f cns3xxx: prevent the ethernet driver from accessing uninitialized dma descriptor entries 
SVN-Revision: 35950
 2013-03-10 21:59:28 +00:00
Felix Fietkau
d22ac8d8fb cns3xxx: minor ethernet driver cleanup 
SVN-Revision: 35949
 2013-03-10 21:59:21 +00:00
Hauke Mehrtens
e1f24d99e1 brcm47xx: refresh config 
SVN-Revision: 35948
 2013-03-10 20:42:26 +00:00
Hauke Mehrtens
89d4fceee2 xburst: fix compilation: remove the __dev attributes 
SVN-Revision: 35946
 2013-03-10 20:26:28 +00:00
Hauke Mehrtens
45b24fa771 kernel: add some missing config options found by the buildbot. 
SVN-Revision: 35945
 2013-03-10 20:25:19 +00:00
Hauke Mehrtens
281e12abae mac80211: b43: increase number of rx slots to 256 again. 
SVN-Revision: 35944
 2013-03-10 20:24:15 +00:00
Felix Fietkau
9facda9570 cns3xxx: use kmalloc instead of kzalloc for ethernet rx buffers 
SVN-Revision: 35943
 2013-03-10 18:25:20 +00:00
Felix Fietkau
c44506fcbd cns3xxx: fix an rx irq handling corner case 
When an rx interrupt comes in, rx interrupts are disabled and NAPI
polling is scheduled. During the NAPI poll, the driver first processes
received frames in the ring, then fills the dma descriptor slots with
new buffers and calls tx complete, before finally re-enabling rx
interrupts and completing NAPI (if below the budget).
If the hardware rx queue overflows before the napi complete is called,
the hardware will not throw any further rx interrupts and rx processing
stops completely.
Fix this by keeping NAPI polling scheduled until it completes a poll
without receiving any packets, and also handle NAPI completion before
refilling rx or completing tx.

SVN-Revision: 35942
 2013-03-10 18:25:16 +00:00
Felix Fietkau
c1adc79328 cns3xxx: fix ethernet driver memory barrier usage 
SVN-Revision: 35941
 2013-03-10 18:25:11 +00:00
Gabor Juhos
9a71711d39 realview: remove 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35940
 2013-03-10 18:06:31 +00:00
Gabor Juhos
35dd42f976 realview: switch to 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35939
 2013-03-10 18:06:29 +00:00
Felix Fietkau
53e0f10246 kernel: prevent -f*-sections from leaking into the boot zImage wrapper on arm 
SVN-Revision: 35938
 2013-03-10 17:04:36 +00:00
Felix Fietkau
2b83c9bd8a kernel: ensure that the arm exception handlers get preserved 
SVN-Revision: 35937
 2013-03-10 17:04:31 +00:00
Felix Fietkau
f0d7ba33ef kernel: use -ffunction-sections, -fdata-sections and --gc-sections on ARM to reduce kernel image size, disable those flags when tracing on MIPS to fix compile errors 
SVN-Revision: 35936
 2013-03-10 14:51:42 +00:00
Felix Fietkau
a1c2e78817 kernel: remove the BROKEN dependency on the kernel export symbol strip 
SVN-Revision: 35935
 2013-03-10 14:51:38 +00:00
Gabor Juhos
5b3ab0e21e xburst: remove 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35934
 2013-03-10 13:24:54 +00:00
Gabor Juhos
00caedf86e xburst: switch to 3.8 
Compile tested only, so add broken flag.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35933
 2013-03-10 13:24:52 +00:00
Gabor Juhos
8942d4dc04 xburst: add support for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35932
 2013-03-10 13:24:50 +00:00
Gabor Juhos
15718f5387 linux/3.8: add missing config symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35931
 2013-03-10 13:24:47 +00:00
Gabor Juhos
f25c050aa9 adm5120: remove 3.7 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35930
 2013-03-10 13:24:46 +00:00
Gabor Juhos
5502bbe2ca adm5120: switch to 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35929
 2013-03-10 13:24:45 +00:00
Gabor Juhos
c42da71d8b malta: remove 3.7 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35928
 2013-03-10 13:24:44 +00:00
Gabor Juhos
6720fc6952 malta: switch to 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35927
 2013-03-10 13:24:43 +00:00
Gabor Juhos
82dc64b19b atheros: remove 3.3 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35926
 2013-03-10 13:24:42 +00:00
Gabor Juhos
5b8e106ae6 atheros: switch to 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35925
 2013-03-10 13:24:40 +00:00
Gabor Juhos
ce5806378e mpc83xx: remove 3.7 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35924
 2013-03-10 13:24:39 +00:00
Gabor Juhos
c79c132229 mpc83xx: switch to 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35923
 2013-03-10 13:24:38 +00:00
Gabor Juhos
27ba973c06 rb532: remove 3.7 support 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35922
 2013-03-10 13:21:40 +00:00
Gabor Juhos
501e4d331d rb532: switch to 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35921
 2013-03-10 13:21:33 +00:00
Gabor Juhos
8223205a29 rb532: add support for 3.8 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35920
 2013-03-10 13:21:29 +00:00
Gabor Juhos
e8a5312bef ar71xx: correct board name to make LEDs work on RB750 
Patch by: Denver A <denvera@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/3419/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35919
 2013-03-10 07:20:57 +00:00
Gabor Juhos
d85ffaabe9 ppc40x: remove __dev_{in,ex}it annotations 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 35918
 2013-03-10 07:20:54 +00:00
Felix Fietkau
446409f43e cns3xxx: reduce buffer allocation size to 2048 bytes, improves ethernet performance 
SVN-Revision: 35917
 2013-03-10 01:27:04 +00:00
Felix Fietkau
95431b7843 cns3xxx: remove linux 3.3 support 
SVN-Revision: 35916
 2013-03-10 01:01:55 +00:00
Felix Fietkau
3d919b7c08 cns3xxx: disable CONFIG_PROC_STRIPPED and add an init script to set the ethernet cpu affinity (improves lan<->wlan bridging performance) 
SVN-Revision: 35915
 2013-03-10 01:01:51 +00:00
Hauke Mehrtens
681769d0c0 mac80211: decrease rx slots to 128, I hope this is a good trade of between stability and memory consumption. 
SVN-Revision: 35913
 2013-03-09 20:01:55 +00:00