Commit graph

12537 commits

Author SHA1 Message Date
Felix Fietkau
4701fd3190 ath9k: improve performance in tx status handling
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 23:10:41 +02:00
Felix Fietkau
1b9dbb8532 Revert "kernel: remove long obsolete gpio spi controller driver patch"
This reverts commit 9e62a7668c.
2016-08-04 23:10:15 +02:00
Felix Fietkau
7c874d18f5 kernel: mark compression modules as hiddden to obsolete the compressor kconfig hack
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Felix Fietkau
93fb6ce05b kernel: mark kmod-udptunnel as hiddden to replace the NET_UDP_TUNNEL kconfig hack
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Felix Fietkau
577f873daf kernel: remove unused morse led trigger driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Felix Fietkau
9e62a7668c kernel: remove long obsolete gpio spi controller driver patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 20:53:02 +02:00
Felix Fietkau
56cf1adc50 kernel: remove esfq qdisc
It has been obsolete for years now

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-04 18:27:54 +02:00
Mathias Kresin
3004298e62 sysupgrade: unmount filesystems before reboot
sysupgrade immediately reboots after flashing an image and doesn't
allow to unmount filesystems. At least in case the image used for
sysupgrade is stored on a FAT formatted usb flash drive, the following
warning is printed during the next mount of the flash drive:

FAT-fs (sda1): Volume was not properly unmounted. Some data may be
corrupt. Please run fsck.

Although a data corruption during read operations is unlikely, there is
no need to scare the users.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-08-04 18:19:46 +02:00
Daniel Golle
877168993a base-files: remove dead code
/etc/init.d/boot tried to create /dev/root based on the kernel's
cmdline which won't work on any recent targets. Remove that code now
that fstools can detect the mounted rootfs based on
/proc/self/mountinfo and /dev/root was long gone anyway.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-08-04 18:19:46 +02:00
Felix Fietkau
fa85ee1d4e kernel: modularize bridge netfilter support a bit further to get rid of some kernel bloat
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-03 19:16:32 +02:00
Felix Fietkau
a5c32a1f19 kernel: remove switch driver kmod packages
Targets that need switch drivers should select them in their kernel
config. This prevents some bloat from creeping into targets that don't
need switchdev/dsa

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-03 19:16:32 +02:00
Lucian Cristian
6e68a5dd11 linux/modules: Add SCH5627 Super I/O chips
Signed-off-by: Lucian Cristian <lucian.cristian@gmail.com>
2016-08-03 15:30:13 +02:00
John Crispin
2feb9433e2 rtc-rv5c386a: package does not build inside the SDK
the packages failed to build inside the SDK due to missing header
files.

Signed-off-by: John Crispin <john@phrozen.org>
2016-08-03 15:30:13 +02:00
John Crispin
10f9ea0bc6 uboot-lantiq: package does not build inside the SDK
the packages failed to build inside the SDK due to missing ethernet
firmware files.

Signed-off-by: John Crispin <john@phrozen.org>
2016-08-03 15:30:13 +02:00
Felix Fietkau
2f8c355850 mkelfimage: remove package, it is a host tool that has been unused for years
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-02 13:54:56 +02:00
Felix Fietkau
cc7029f8a9 uboot-ar71xx: fix default selection for NBG460N/550N/550NH
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-02 13:50:43 +02:00
Felix Fietkau
0cd13c53c1 mac80211: fix minor memleak on AP restart / warning on driver unload
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-02 13:08:05 +02:00
Felix Fietkau
18373e24cf ath9k: fix sta initialization bug leading to stability issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-02 13:07:59 +02:00
Hauke Mehrtens
2694d43b05 gdb: fix build with gcc 4.1.2 as host compiler
The additional warnings are causing compile errors on gcc version 4.1.2
as a host compiler.

cc -c  -Wall -Wdeclaration-after-statement -Wpointer-arith
-Wpointer-sign -Wno-unused -Wunused-value -Wunused-function -Wno-switch
-Wno-char-subscripts -Wmissing-prototypes -Wdeclaration-after-statement
-Wempty-body -Wmissing-parameter-type -Wold-style-declaration -Wold-
style-definition -Wformat-nonliteral  -I. -I. -I./../../include
filter_host.c
cc1: error: unrecognized command line option "-Wempty-body"
cc1: error: unrecognized command line option "-Wmissing-parameter-type"
cc1: error: unrecognized command line option "-Wold-style-declaration"
cc1: error: unrecognized command line option "-Wempty-body"
cc1: error: unrecognized command line option "-Wmissing-parameter-type"
cc1: error: unrecognized command line option "-Wold-style-declaration"

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-08-01 22:25:54 +02:00
Felix Fietkau
5c9cc7b7f8 base-files: increase vm.min_free_kbytes
Network drivers typically allocate memory in atomic context. For that to
be reliable, there needs to be enough free memory. Set the value
heuristically based on the total amount of system RAM.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-01 14:53:27 +02:00
Florian Eckert
109c55aea1 uqmi: add metric option to interface config
It is now possible to add an metric option for the qmi proto in dhcp mode.

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-07-26 08:39:36 +02:00
Florian Eckert
15867deac8 uqmi: fix option ipv6
If option ist not set then ipv6 is still enabled on this Interface.
Check if variable is zero will fix this issue.

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-07-26 08:39:36 +02:00
Felix Fietkau
180465c38f build: create a package feed directory containing all packages
Needed for proper dependency handling for per-device rootfs

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-01 11:13:38 +02:00
Felix Fietkau
5e41c1d447 perf: prevent build from within the sdk and mark as nonshared
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:25 +02:00
Felix Fietkau
9201e88f51 kernel: remove hostap driver
It has been marked as broken for well over a month now and nobody has
complained.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 12:25:24 +02:00
Felix Fietkau
b2ddfbc1c7 dnsmasq: drop --interface and --except-interface options when the interface cannot be found
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 20:58:14 +02:00
Felix Fietkau
009d6d6024 netifd: update to the latest version, adds an event handling fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 19:51:31 +02:00
Felix Fietkau
5cd88f4812 dnsmasq: remove use of uci state for getting network ifname
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 19:48:22 +02:00
Felix Fietkau
a1681ce39b dnsmasq: replace the iface hotplug script with a procd trigger
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:09 +02:00
Felix Fietkau
6916ca8d33 dnsmasq: make the check for existing DHCP servers more reliable
If there is no carrier yet, wait for 2 seconds (STP forwarding delay)

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:09 +02:00
Ulrich Weber
712b6fdc5c dnsmasq: write atomic config file
multiple invocation of dnsmasq script (e.g. by procd and hotplugd)
might cause procd to restart dnsmasq with an incomplete config file.
Config file generation might take quite a long time on larger configs
due ubus calls for each listening interface...

Signed-off-by: Ulrich Weber <ulrich.weber@riverbed.com>
2016-07-29 16:41:09 +02:00
Felix Fietkau
d9ff187003 netifd: update to the latest version
Emits an initial event after the first link-up of a force_link
interface. This is needed for making the dnsmasq dhcp check more
reliable

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:09 +02:00
Felix Fietkau
f88e3a4c0a procd: add default timeout for reload trigger actions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:09 +02:00
Felix Fietkau
c02f41c1d2 igmpproxy: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:09 +02:00
Felix Fietkau
8299737428 dropbear: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:08 +02:00
Felix Fietkau
88304ea6e5 sysntpd: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:08 +02:00
Felix Fietkau
8891d941e0 procd: rework trigger handling
Open/close triggers array around service_triggers call to make using
multiple triggers easier to deal with.
The API was quite confusing, because some functions contained implicit
trigger open/close calls and some didn't.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:08 +02:00
Felix Fietkau
eed30bc869 procd: update to the latest version
Fixes a long standing design issue in handling of delayed triggers

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:08 +02:00
Felix Fietkau
11d47e615b libubox: update to the latest version, adds a few utility functions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 16:41:08 +02:00
Felix Fietkau
731b166528 build: add template for getting opkg package files from package names
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
5d30bf8303 build: rework opkg command invocation
Drop included $(XARGS), add support for passing target dir via parameter

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
7dffc32ffa build: rework prepare_rootfs to pass target dir via parameter
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Felix Fietkau
973e6e1d71 build: move rootfs processing code to include/rootfs.mk so it can be reused later
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-29 10:18:26 +02:00
Álvaro Fernández Rojas
c58ed54d8c brcmfmac43430-firmware: update to v7.45.41.26
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-07-28 15:17:48 +02:00
Merlijn Wajer
4a0c4d8151 netifd: Use -x hostname:$hostname instead of -H
Passing the hostname is currently broken in since the shipped busybox includes this commit:
https://git.busybox.net/busybox/commit/networking/udhcp/dhcpc.c?id=2017d48c0d70bef8768efb42909e605ea8eb5a21

Before:

    Sun Jan 31 18:11:32 2016 daemon.notice netifd: Interface 'wan' is now down
    Sun Jan 31 18:11:32 2016 daemon.notice netifd: Interface 'wan' is setting up now
    Sun Jan 31 18:11:32 2016 daemon.notice netifd: wan (18158): udhcpc: option -h NAME is deprecated, use -x hostname:NAME
    Sun Jan 31 18:11:32 2016 daemon.notice netifd: wan (18158): udhcpc: malformed hex string 'WR150'

After:

    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): udhcpc (v1.23.2) started
    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Sending discover...
    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Sending select for xxx.yyy.zzz.xyz...
    Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Lease of xxx.yyy.zzz.xyz obtained, lease time 600

Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
2016-07-24 06:59:55 +02:00
Conn O'Griofa
e1406cd31a base-files: sysupgrade: fix pseudobridge upgrades
Treat 'relayd' as an essential service to avoid connection interruptions during sysupgrade on devices configured as a pseudobridge.

Signed-off-by: Conn O'Griofa <connogriofa@gmail.com>
2016-07-24 06:54:40 +02:00
John Crispin
30d35181cd mountd: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-24 06:38:30 +02:00
John Crispin
74766f4c4f firewall3: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-24 06:38:30 +02:00
John Crispin
b15f41d4d6 ugps: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-24 06:38:30 +02:00
Felix Fietkau
da328f2865 hostapd: backport mesh/ibss HT20/HT40 related fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-27 17:22:39 +02:00
Daniel Golle
86c0a569f4 fstools: update to latest HEAD
Fixes duplicate ubiblock entries being listed and improves
find_mount_point to also match against a block device's
major:minor numbers (needed e.g. for /dev/root).

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-07-27 01:25:07 +02:00
Etienne CHAMPETIER
35e423ca41 base-files: use procd init for urandom_seed
Previous implementation was blocking the init and
breaking halt/reboot/sysupgrade (reported by Daniel Golle)

v2: use procd logging, use set -e + trap for error handling

Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
2016-07-27 01:24:54 +02:00
Felix Fietkau
5fd2eabeb2 base-files: remove support of profile-specific base-files
It is incompatible with multi-profile builds and has not been used
in-tree anyway.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-26 08:26:24 +02:00
Felix Fietkau
776ca66261 ath9k: fix warning in client mode (GH#195)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-26 08:26:05 +02:00
Felix Fietkau
04a6984319 ath9k: remove intermediate queueing patch until it is fixed properly
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-24 22:41:20 +02:00
Hauke Mehrtens
bafeb90745 iperf3: update to version 3.1.3
old size:
iperf3_3.0.11-1_mips_34kc_dsp.ipk       30147

new size:
iperf3_3.1.3-1_mips_34kc_dsp.ipk        33640

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-24 15:05:50 +02:00
Hauke Mehrtens
9cbb51ff8c iperf: update to version 2.0.9
old size:
iperf_2.0.8-1_mips_34kc_dsp.ipk 27911

new size:
iperf_2.0.9-1_mips_34kc_dsp.ipk 28681

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-24 15:05:33 +02:00
Hauke Mehrtens
bdf9243c1b cyassl: update to wolfssl version 3.9.6
Changelog: https://www.wolfssl.com/wolfSSL/Docs-wolfssl-changelog.html

old size:
libcyassl_3.9.0-1_mips_34kc_dsp.ipk     147552

new size:
libcyassl_3.9.6-1_mips_34kc_dsp.ipk     150087

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-24 15:05:03 +02:00
Hauke Mehrtens
7d38128f6a curl: update to version 7.50.0
Changelog: https://curl.haxx.se/changes.html

old sizes:
libcurl_7.49.0-1_mips_34kc_dsp.ipk      97569
curl_7.49.0-1_mips_34kc_dsp.ipk         37925

new sizes:
libcurl_7.50.0-1_mips_34kc_dsp.ipk      97578
curl_7.50.0-1_mips_34kc_dsp.ipk         38017

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-24 15:04:13 +02:00
Felix Fietkau
cd91f384ac openssl: re-enable NPN by default
Several packages rely on it

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-24 14:43:44 +02:00
Felix Fietkau
cb8f322d93 openssl: add back the CAST cipher by default
At least netatalk and some ipsec packages use it

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-24 14:42:18 +02:00
Felix Fietkau
600fd467d8 openssl: revert the no-ripemd change, openssh needs that cipher
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-23 19:03:47 +02:00
Ben Greear
164a405a48 ath10k: Support installing CT firmware for QCA9984 NICs.
This firmware has been lightly tested on non LEDE system
to date, and will be undergoing further testing and development.
Allow users to easily install this on their LEDE system as
they prefer.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-07-23 12:28:48 +02:00
Ben Greear
9971ab0457 ath10k-ct-firmware: Update to latest 9880 firmware.
Fixes some issues with AES encryption and macbooks.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-07-23 12:28:33 +02:00
Ben Greear
eb8ffbebf8 ath10k-ct: Update to latest ath10k-ct driver.
Adds support for 9984 NICs, and an upstream bugfix or two.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-07-23 12:28:25 +02:00
Dirk Feytons
3ad8bc4366 openssl: add option to disable SRP support
Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 12:10:41 +02:00
Dirk Feytons
057b116e09 openssl: add --gc-sections
Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 12:10:08 +02:00
Dirk Feytons
41da31ac2c openssl: remove some unneeded functionality and algorithms
The patch needed for this commit has been sent upstream:
https://github.com/openssl/openssl/pull/1155

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [add back bf and srp]
2016-07-23 12:09:51 +02:00
Dirk Feytons
f16fc21675 openssl: add option to disable PSK support
Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 11:59:31 +02:00
Dirk Feytons
0099748fd6 openssl: add option for NPN support
NPN has been superseded by ALPN so NPN is disabled by default
The patch has been sent to OpenSSL for inclusion, see
https://github.com/openssl/openssl/pull/1100

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 11:59:31 +02:00
Dirk Feytons
eb4fc91a81 openssl: add option to disable compression support
By default it's disabled. After the CRIME attack it seems the use of
compression is discouraged.

Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 11:59:31 +02:00
Dirk Feytons
db11695aa6 openssl: add option to omit deprecated APIs
Signed-off-by: Dirk Feytons <dirk.feytons@gmail.com>
2016-07-23 11:59:30 +02:00
Christian Lamparter
39f3408732 ppc4xx: remove booke-wdt watchdog package
This patch gets rid of the booke watchdog kmod package.
Instead the affected boards will enable it in their
kernel configs.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
2016-07-22 09:48:12 +02:00
Matthias Schiffer
b82c8ddf8c
libpcap: fix dependency of install-shared-so make target
There seems to be a situation in which a rebuild of libpcap.so is triggered
in the install step of the libpcap Makefile. libpcap.so is the wrong
target, leading to the build failure reported in [1].

Fix the dependency of install-shared-so to $(SHAREDLIB) so the build can
succeed in this case.

[1] https://dev.openwrt.org/ticket/19894

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
2016-07-21 17:57:17 +02:00
Felix Fietkau
c7a5bb5a7e samba36: avoid picking up a dependency on libunwind (fixes GH #212)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 17:33:17 +02:00
Felix Fietkau
ca6375ac51 hostapd: fix an error on parsing radius_das_client
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 16:58:50 +02:00
Felix Fietkau
14eb09d5c0 ath10k: add NAPI support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 16:17:08 +02:00
Felix Fietkau
467d15b73d mac80211: add a mesh related fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-21 16:16:49 +02:00
Zhao Gang
d963ddf042 ar71xx: add support for gl-ar300m
This add initial support for gl-ar300m router.
Product page: http://www.gl-inet.com/ar300m/

Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
2016-07-20 00:21:48 +02:00
Felix Fietkau
6c2651566c ath9k: switch to using mac80211 intermediate software queues
Provides a nice latency reduction under load, due to mac80211's fq_codel
support.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 14:27:08 +02:00
Felix Fietkau
122a7021a9 ubox: update to the latest version, fixes lsmod output
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 13:59:04 +02:00
Felix Fietkau
6b654ab741 uboot-oxnas: fix build error on non-linux systems
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-19 12:48:28 +02:00
Hauke Mehrtens
9b05d3aa8e strace: update to version 1.12
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-18 23:25:30 +02:00
Felix Fietkau
56f686b710 samba36: disable local browse master by default
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-18 13:37:12 +02:00
Felix Fietkau
75329fc161 hostapd: fix VLAN support in full wpad builds
Suppress -DCONFIG_NO_VLAN if CONFIG_IBSS_RSN is enabled

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-18 13:37:10 +02:00
Felix Fietkau
7cdb51e046 ath10k: fix stack traces from a-msdu rx reporting issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-17 12:53:30 +02:00
Felix Fietkau
207338c78e ath9k: implement temperature compensation support for AR93xx and newer
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-15 14:19:22 +02:00
Felix Fietkau
98e4b504b4 ath9k: use external reset on AR91xx and QCA955x to improve stability
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-15 14:19:13 +02:00
Felix Fietkau
b948c9371b uclibc++: fix build with gcc 6.1.0, which defaults to using C++14 ABI
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-15 14:18:01 +02:00
Felix Fietkau
3273267c2b ath9k: fix spectral scan on AR9285 and newer AR92xx chipsets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-15 14:15:34 +02:00
Felix Fietkau
9edb651094 ath9k: merge a fix for the minimum CCA threshold on 5 GHz
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-15 14:15:31 +02:00
Felix Fietkau
55761205ef mac80211: fix a harmless uninitialized variable warning
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-14 13:32:00 +02:00
Ben Greear
1c52826010 add ath10k-ct: Candela-Tech ath10k out-of-tree driver.
This lets one use the CT ath10k driver instead of the built-in
ath10k driver from the upstream kernel (or backports).

This should be a drop-in replacement, as well as enabling
better CT firmware support.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-07-14 12:45:06 +02:00
Hauke Mehrtens
d43075710b mbedtls: fix missing mbedtls_time_t bug in mbedtls 2.3.0
This backports a commit from mbedtls current git which adds missing
include for platform.h.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-14 09:19:56 +02:00
Hauke Mehrtens
05cc72944c mbedtls: update to version 2.3.0
This fixes 3 minor security problems.
SSLv3 is deactivated by default now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-13 23:03:03 +02:00
Hauke Mehrtens
bd20cb272e polarssl: update to version 1.3.17
This fixes 3 minor security problems.
SSLv3 is deactivated by default now.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-13 23:03:02 +02:00
Piotr Dymacz
14ee2b0642 uboot-envtools: add support for jjPlus JWAP230
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
Piotr Dymacz
c30fd5e87d uboot-envtools: add support for Wallys DR531
Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
2016-07-13 20:03:10 +02:00
Felix Fietkau
4952469ff9 mac80211: disable fq until performance issues have been found and fixed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-12 15:05:26 +02:00
Hans Dedecker
99e5bec2c6 netifd: quote vendorid and hostname variables in dhcp script
Quote hostname and vendorid variables in dhcp script so they can
hold strings having white spaces

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-07-12 14:33:49 +02:00
Felix Fietkau
cef1f4ef2b ath9k: explicitly clear gpio chip owner
The core can set it based on the parent device on register

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-11 15:53:48 +02:00
Felix Fietkau
5b07e8731b ath9k: remove gpio chip owner field to fix module unloading
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-11 15:46:42 +02:00
Felix Fietkau
5ce2341a03 mac80211: fix a powersave issue in the intermediate queueing code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-11 15:46:35 +02:00
Felix Fietkau
4f106d6c07 Revert "ath9k: switch to using mac80211 intermediate software queues"
This reverts commit 31e5ed4152.
I've noticed some weird powersave related issues with this commit.
Revert until they've been fixed.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-11 14:55:22 +02:00
John Crispin
9352603fff mtd-utils: merge ubi/nand-utils into one package
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-11 14:19:47 +02:00
Kevin Darbyshire-Bryant
17f4d3967e samba: update smb template socket options defaults
Removed socket options = TCP_NODELAY IPTOS_LOWDELAY

TCP_NODELAY (disables Nagle algorithm) is default since samba2.
IPTOS_LOWDELAY sets DSCP 0x10 coding (CS2)
The alternate IPTOS_THROUGHPUT sets DSCP 0x08 coding (CS1)

CS1 is a scavenger class, whilst CS2 is more OAM/interactive
(SNMP,SSH,syslog)

Using CS2 is definitely an abuse of DSCP classification, CS1 less so
however even if the ISP takes note of DSCP codings having a default that
sets traffic to CS2 is wrong.  Better to use the default Best Effort
class.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-07-11 14:19:47 +02:00
Kevin Darbyshire-Bryant
3dded42f05 iftop: fix mac address display
iftop would display portions of mac address with large ffffff prefixes.
Make if_hw_addr type consistent.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-07-11 14:19:47 +02:00
John Crispin
ef3c0cf590 procd: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-11 14:19:47 +02:00
Kevin Darbyshire-Bryant
527696674a igmpproxy: logging options - make work & improve
Move logging command line option to uci:
option verbose [0]/1/2 - mono-syllabic/verbose/noisy

Previously handled as 'OPTIONS' in .init script however variable
was ignored so never worked.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-07-11 14:19:47 +02:00
Felix Fietkau
31e5ed4152 ath9k: switch to using mac80211 intermediate software queues
Provides a nice latency reduction under load, due to mac80211's fq_codel
support.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-11 10:16:49 +02:00
Felix Fietkau
916aebb300 ath10k: fix a compiler warning
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-09 19:42:26 +02:00
Felix Fietkau
73dd59546b ath10k: fix #if vs #ifdef in led trigger patch
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-09 19:42:22 +02:00
Felix Fietkau
78ae53ff2f mac80211: make package ath9k-common hidden
It cannot be selected independently of ath9k and ath9k-htc

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-09 19:38:49 +02:00
Álvaro Fernández Rojas
f4293e476d brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-07-09 16:29:19 +02:00
Rafał Miłecki
c729fe0269 mac80211: backport brcmfmac changes from 2016-07-08
To work correctly hostapd requires wireless driver to allow interfaces
removal. It was working with brcmfmac only partially. Firmware for
BCM43602 got some special hack (feature?) that allowed removing all
interfaces by disabling mbss mode. It wasn't working with BCM4366
firmware and remaining interfaces were preventing hostapd from starting
again.

Those patches add support for "interface_remove" firmware method which
works with BCM4366 firmware and they make it finally possible to use
BCM4366 & brcmfmac & multiple interfaces.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-08 18:21:04 +02:00
Felix Fietkau
d98409edbc mt76: update to the latest version, fixes powersave issues
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-08 10:41:45 +02:00
Gabe Rodriguez
07e8cfed8a mwlwifi: Update to latest version
Signed-off-by: Gabe Rodriguez <lifehacksback@gmail.com>
2016-07-07 10:57:45 +02:00
Felix Fietkau
bcb1d9399f valgrind: update to the latest version, fix build issues on ARM
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-07 10:57:45 +02:00
Christian Lamparter
c1c49d9456 prism54-firmware: change prism54/p54-firmware package versioning
There are multiple prism54/p54 firmware versions for different
drivers and devices. Therefore, assigning the package version
of all the different firmware packages on the old prism54
firmware could break if any of the p54 firmwares are updated
and we need to roll out new packages.

Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[removed PKG_VERSION]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-07 00:02:18 +02:00
Rafał Miłecki
8d95b665e8 mac80211: backport brcmfmac changes from 2016-06-29
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-07-06 10:34:19 +02:00
Felix Fietkau
ad430c1080 hostapd: add a WDS AP fix for reconnecting clients
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-06 10:12:37 +02:00
neheb
a3e7d5e7ae samba: Update smb.conf.template
Removed some options which are default anyway and added bind interfaces
only which causes the interfaces line to actually have an effect. Can be
verified with netstat.

Signed-off by: Rosen Penev <rosenp@gmail.com>
2016-07-05 22:59:14 +02:00
John Crispin
9a4345069f procd: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 22:59:14 +02:00
John Crispin
21fa645f7a uci: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 22:59:14 +02:00
John Crispin
cbf6bc296f usign: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 22:59:14 +02:00
John Crispin
d643ee0260 umbim: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 22:59:13 +02:00
John Crispin
1a06dc6dc2 libubox: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-05 22:59:13 +02:00
Daniel Dickinson
a7f6dc9f8b px5g: Create mbedtls variant
px5g has been listed as a blocker for switching to new mbedtls
as the default, therefore make and mbedtls variant of px5g so
that an new mbedtls-only image can be created.

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
2016-07-05 22:59:12 +02:00
Zoltan HERPAI
df2889c709 packages: fix bmp085-spi typo
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
2016-07-05 13:36:36 +02:00
Felix Fietkau
bd7289af38 uclient: update to the latest version, fixes HTTP redirect support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-05 12:40:30 +02:00
Felix Fietkau
92d856f50a ath9k: add beacon related stability fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-05 10:45:17 +02:00
Felix Fietkau
71753a8286 Revert "ustream-ssl: Fix recursive dependency"
This reverts commit abf0768131.
The description is wrong, there is no recursive dependency here. The
conditions were added intentionally to avoid bogus build dependencies.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-04 16:47:56 +02:00
Jo-Philipp Wich
dd9afb8207 iwinfo: fix nl80211 phy lookup without platform prefix
Commit d9b20a6f35 (SVN r48426) changed the
mac80211 phy lookup logic to strip the platform/ directory component from
the phy path specification.

Fix iwinfo to follow that logic by trying to lookup phys both with and
without "platform/" prefix.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-04 16:26:38 +02:00
Jo-Philipp Wich
70b4e46804 e2fsprogs: fix build on OS X systems
On OS X systems, the compilation of e2fsprogs fails at subst.c due to a
missing sys/stat.h include:

    subst.c:333:14: error: variable has incomplete type 'struct stat'
            struct stat stbuf;
                        ^
    subst.c:333:9: note: forward declaration of 'struct stat'
            struct stat stbuf;
                   ^
    subst.c:392:8: warning: implicit declaration of function 'fstat' is invalid in C99
          [-Wimplicit-function-declaration]
                            if (fstat(fd, &stbuf) == 0) {
                                ^
    subst.c:438:12: warning: implicit declaration of function 'fchmod' is invalid in C99
          [-Wimplicit-function-declaration]
                                    (void) fchmod(ofd, 0444);
                                           ^
    2 warnings and 1 error generated.
    make[3]: *** [subst.o] Error 1

Declare the nescessary HAVE_SYS_STAT_H macro to include the required header in
order to avoid the undeclared stat structure.

Tested-By: David Thornley <david.thornley@touchstargroup.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-07-04 16:26:26 +02:00
Daniel Dickinson
abf0768131 ustream-ssl: Fix recursive dependency
Two variants incorrectly include themselves in
conditional depends on ssl libraries, which results
in a recursive dependency.

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
2016-07-04 10:51:41 +02:00
Felix Fietkau
f5088dc13f kernel: fix duplicate drivers for the PC speaker in one package
Only use the ALSA capable one, it supports regular beeps as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-03 19:35:43 +02:00
Felix Fietkau
f226d5879e mac80211: move include statements for skb_get_hash_perturb() to prevent issues with newer kernels
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-03 18:13:11 +02:00
Felix Fietkau
b174832159 mac80211: backport skb_get_hash_perturb() for 4.1 and older
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-03 17:56:53 +02:00
Martin Blumenstingl
70afc0bdd1 kernel: mac80211: set the parent of the ath9k gpio_chip
This allows gpiolib to re-use ath9k's devicetree node as GPIO
controller.
Example:

ath9k: ath9k@0 {
	#gpio-cells = <2>;
	gpio-controller;
}

Now the ath9k node can be used just like any other GPIO controller:
	gpios = <&ath9k 1 GPIO_ACTIVE_HIGH>;

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-07-02 19:34:50 +02:00
Martin Blumenstingl
7b7ea91e24 kernel: mac80211: enable the gpio controller for all ath9k devices
This enables ath9k's built-in GPIO controller for all chip versions
(instead of an explicit whitelist). This also allows us to get rid of
some duplicate code between hw.c and gpio.c because hw.c already
determines the number of GPIOs.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-07-02 19:34:50 +02:00
Martin Blumenstingl
3ce71eaedd kernel: mac80211: fold the AR9280 GPIO patch into the ath9k GPIO patch
This folds 550-ath9k_add_ar9280_gpio_chip.patch into
548-ath9k_enable_gpio_chip.patch because the former patch only extends
code which is introduced in the latter.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-07-02 19:34:50 +02:00
Mathias Kresin
cbfeb7796e mac80211: refresh patches
Signed-off-by: Mathias Kresin <dev@kresin.me>
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
2016-07-02 19:34:50 +02:00
Felix Fietkau
76d09dcb01 ath10k: fix tx performance regression on older chipsets
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:50 +02:00
Felix Fietkau
d002aee42c mac80211: enable STBC and LDPC for VHT rates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:50 +02:00
Felix Fietkau
898fff8253 ath10k-firmware: add symlink for QCA9984 board.bin
Use first caldata for devices without OTP. The driver uses the caldata
instead of the board.bin data anyway

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:50 +02:00
Felix Fietkau
67a7daa938 mac80211: update to wireless-testing 2016-06-20
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:50 +02:00
John Crispin
2a8bb46294 jsonfilter: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-02 10:16:18 +02:00
neheb
8a83ffbefd procd: Set /dev/kmsg to 600
Small cleanup. I initially though /dev/kmsg was used for dmsg(and journald
on desktops) but this seems not to be the case. dmsg is still accessible
as non-root(gives output) which begs the question what does this do? Some
googling reveals that permissions are set to 600 for some embedded systems
while 644 for others. I can't find any justification for the latter. Might
as well err on the side of caution.

Signed-off by: Rosen Penev <rosenp@gmail.com>
2016-07-02 10:16:18 +02:00
John Crispin
bb00c0a33c fstools: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-02 10:16:18 +02:00
John Crispin
a74f593647 procd: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-02 10:16:18 +02:00
John Crispin
c5a2713929 ubox: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-02 10:16:17 +02:00
John Crispin
1e9c066595 ustream-ssl: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-02 10:16:17 +02:00
John Crispin
25275bcc24 ubus: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-07-02 10:16:17 +02:00
Sergey Sergeev
3fbadd624a nand-utile: add package
This package is a custom build(like ubi-utils) of mtd-utils from infradead.org
It is required to work with Mikrotik NAND based devices

Signed-off-by: Sergey Sergeev <adron@yapic.net>
2016-07-02 10:16:17 +02:00
Hauke Mehrtens
f28502a485 libnl-tiny: Generic Netlink multicast groups support
This adds this commit from normal libnl to libnl-tiny:
2dbc1ca76c

commit 2dbc1ca76c5b82c40749e609eb83877418abb006
Author: dima <dima.ky@gmail.com>
Date:   Wed Oct 13 17:53:34 2010 +0300

    Generic Netlink multicast groups support

    I have a patch against commit d378220c96c3c8b6f27dca33e7d8ba03318f9c2d
    extending libnl with a facility to receive generic netlink messages sent
    to multicast groups.

    Essentially it add one new function genl_ctrl_resolve_grp which
    prototype looks like this
    int genl_ctrl_resolve_grp(struct nl_sock *sk, const char *family_name,
            const char *grp_name)
    It resolves  the family name and the group name to group id. Then
    the returned id can be used in nl_socket_add_membership to subscribe
    to multicast messages.

    Besides that it adds two more functions

    uint32_t nl_socket_get_peer_groups(struct nl_sock *sk)
    void nl_socket_set_peer_groups(struct nl_sock *sk, uint32_t groups)

    allowing to modify the socket peer groups field. So it's possible to
    multicast messages from the user space using the legacy interface.
    Looks like there is no way (or I was not able to find one?) to modify
    the netlink socket destination group from the user space, when the
    group id is greater then 32.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cosmetic style fix]
2016-07-02 10:12:04 +02:00
John Crispin
97c90557a9 spidev_test: copy the source code into the package folder
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-30 22:48:39 +02:00
Stephen Walker
66b67b743f kernel: other.mk: add pps-ldisc support
The pps-ldisc kernel module supports Pulse-Per-Second connected with the CD (Carrier Detect) pin.

Signed-off-by: Stephen Walker <stephendwalker+github@gmail.com>
2016-06-30 22:48:39 +02:00
John Crispin
9597675d8e procd: change /dev/{gpio,hvc*} perms to 0600
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-30 22:48:39 +02:00
neheb
c6cef6dde7 procd: adjust /dev entries to desktop distro defaults
This changes the default permissions for /dev entries to be more similar to
a desktop distro. Taken from the defaults of Arch Linux and Ubuntu. Also
changed some that were nonsensical. For example, all 660 permissions on
desktop distros were of the form root:x where x is something other than
root. As such, 660 is useless for LEDE where the specific group is missing.
audio seems to be the only group that isn't.

Signed-off by: Rosen Penev <rosenp@gmail.com>
2016-06-30 22:48:39 +02:00
Etienne CHAMPETIER
3946a55291 base-files: seed /dev/urandom
This commit:
1) seed /dev/urandom with the saved seeds as early as possible
   (see /lib/preinit/81_urandom_seed)
2) save a seed at /etc/urandom.seed if it doesn't exists
3) save a new seed each boot at "system.@system[0].urandom_seed"
   (see /etc/init.d/urandom_seed)

We use getrandom() so we are sure /dev/urandom pool is initialized

Seed size is 512 bytes (ie /proc/sys/kernel/random/poolsize / 8)
it's the same size as in ubuntu 14.04 and all systemd systems

Seeding /dev/urandom doesn't change entropy estimation, so we still have
"random: ubus urandom read with 4 bits of entropy available"
messages in the logs, but we can now ignore them if
after "urandom-seed: Seeding with ..." message

Saving a new seed on each boot is disabled by default to avoid too much
writes without user consent

v2: log preinit messages to /dev/kmsg
v3: use non generic function name for logging, as /lib/preinit/ files
    are all sourced together in /etc/preinit
v4: after a lot of discussion on the ML, use a uci config param
v5: config param is now the path of the seed

Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
2016-06-30 22:48:39 +02:00
Daniel Dickinson
3ee278c5c9 package/kernel: Enable XATTR by default
OpenWrt enables XATTR support pretty much universally, therefore
for filesystems that a loaded as modules also enable XATTR support
so that there are no unexpected missing capabilities.

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
2016-06-30 22:48:39 +02:00
Hauke Mehrtens
ffcae8b494 prism54-firmware: add also other p54 firmware to own package
Extract the other p54 firmware files into the prism54-firmware package.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2016-06-30 19:42:59 +02:00
Hauke Mehrtens
37fa64a6c5 firmware: extract prism54-firmware into own package
Instead of downloading the firmware for prism54 devices in the
wireless.mk do it in an extra package Makefile. To ship the complete
source code Intel ships our modified OpenWrt/LEDE + the content of the
dl directory. We do not want to have any files in the dl/ directory
which are not needed to build our images. The prism54 gets downloaded
every time independently of building kmod-net-prism54 or not. When it
is in a own package it only gets downloaded when the firmware package
is selected.

Signed-off-by: Hauke Mehrtens <hauke.mehrtens@intel.com>
2016-06-30 19:21:02 +02:00
Hans Dedecker
ecbc138343 odhcp6c: Upstep to latest version
Following fixes are included in the latest version:
    -Script is launched with incorrect action
    -Possible buffer overflows
    -Lots of minor bugfixes

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-06-30 14:53:21 +02:00
Kevin Darbyshire-Bryant
0b208a7de1 kmod-sched-cake: Switch to COBALT algorithm
COBALT is a hybrid codel/blue algo combining best elements of both.
Exhibits improved behaviour in presence of abuse from unresponsive flows
handled by 'blue', whereas responsive flows are still handled by codel.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-30 00:43:03 +02:00
Kevin Darbyshire-Bryant
6d7f54ccdb iproute2: cake AQM prepare tc for COBALT algorithm
Cake AQM is experimenting with a codel/blue hybrid AQM COBALT instead
of just using codel alone. This patch updates tc to cope with some new
stats produced by COBALT.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-30 00:43:03 +02:00
Hans Dedecker
c2bd469521 dnsmasq: Add broken realtime clock build switch in full variant
By default dnsmasq uses the time function; which returns the time since
Epoch; to retrieve the current time. On boards which have no realtime
clock this can lead to side effects when the time is synced via ntp
as the "time wrap" forces dhcp leases to be considered as expired.
By enabling the broken realtime clock build switch dnsmasq uses the
times utility which returns the number of clock tick.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
[Jo-Philipp Wich: change symbol name, add sym to PKG_CONFIG_DEPENDS]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-30 00:42:46 +02:00
Jo-Philipp Wich
95d9330d57 rpcd: iwinfo plugin fixes
- Expose supported HT rate information in info call
 - Zero out ccode buffer when listing countries

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-30 00:42:02 +02:00
Alexander Couzens
19aae09f5f kmod-bmp085: add dependency on !LINUX_3_18 !LINUX_4_1
93d5629a introduced a build failure on older platforms (<4.4)
because bmp085 is a boolean and not a tristate.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-29 02:46:48 +02:00
Dirk Neukirchen
93d5629a27 modules: add BMP085 pressure sensor
add BMP085 and BMP180 pressure sensors
this driver supports the SPI and I2C and
older chips (BMP280 is supported by iio subsystem)

issue found when cleaning up omap/config

found while writing this patch that a
similar patch was submitted in June/July 2014 but not integrated

only compile tested

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-29 00:42:19 +02:00
Jo-Philipp Wich
1e03998e2b mac80211: fix skb size calculation in 4addr mode (FS#24)
The PDU length of incoming LLC frames is set to the total skb payload size
in __ieee80211_data_to_8023() of net/wireless/util.c which incorrectly
includes the length of the IEEE 802.11 header.

The resulting LLC frame header has a too large PDU length, causing the
llc_fixup_skb() function of net/llc/llc_input.c to reject the incoming
skb, effectively breaking STP.

Solve the problem by properly substracting the IEEE 802.11 frame header size
from the PDU length, allowing the LLC processor to pick up the incoming
control messages.

Special thanks to Gerry Rozema for tracking down the regression and proposing
a suitable patch.

Fixes FS#24.

References:
https://bugs.lede-project.org/index.php?do=details&task_id=24

Reported-by: Gerry Rozema <gerryr@rozeware.com>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-28 22:43:22 +02:00
Jo-Philipp Wich
8d51706616 base-files: use LEDE NTP vendor pool
The vendor NTP pool for the LEDE project got approved, so switch to it now.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-28 19:14:31 +02:00
Jo-Philipp Wich
f98f4601de openvpn: fix missing cipher list for polarssl in v2.3.11
Upstream OpenSSL hardening work introduced a change in shared code that
causes polarssl / mbedtls builds to break when no --tls-cipher is specified.

Import the upstream fix commit as patch until the next OpenVPN release gets
released and packaged.

Reported-by: Sebastian Koch <seb@metafly.info>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-28 10:47:22 +02:00
Daniel Dickinson
4a3b8e0596 lldpd: Use /etc/os-release instead of /etc/openwrt_*
With the addition of /etc/os-release patching lldpd to use
/etc/openwrt_release and to have the initscript use
/etc/openwrt_release and/or /etc/openwrt_version becomes
unnecessary.

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
2016-06-27 15:16:01 +02:00
Alin Năstac
86a2702a00 libnetfilter_queue: fix checksum computation
There are 2 issues fixed by this patch:
  - UDP checksum is computed incorrectly, the used pseudo IP header
    contains transport protocol 6 iso 17
  - on big endian arches the UDP/TCP checksum is incorrectly
    computed when payload length is odd

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [refresh patch]
2016-06-26 16:09:48 +02:00
Hauke Mehrtens
9493613e94 linux-firmware: fix md5sum
The copy on the mirror has a different md5sum as specified in this
package Makefile. The content of the file on the mirror is the same as
in the checkout so just update our md5sum.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-25 19:20:16 +02:00
Hauke Mehrtens
2ca4fa5feb rtl8192su-firmware: move firmware to own package
Instead of downloading the firmware from some website take it from
linux-firmware package and do not download it separately any more.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-25 19:20:16 +02:00
Hauke Mehrtens
d2a372c4fc rtl8192se-firmware: fix package build
The package did not pack the firmware because of a problem which looks
like a copy and past error.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-25 19:20:16 +02:00
Jo-Philipp Wich
cb7aa4b1fe ebtables: fix segmentation fault due to uninitialized extension data
The ebtables code relies on the `-nostartfiles` linker argument to execute the
extension modules' `_init()` functions automatically which is not working
reliably across all supported targets and gcc versions.

Running an ebtables executable linked this way just crashes with a segmentation
fault at runtime on program startup, e.g. on ARM architectures.

In order to fix the issue ...
 - remove the use of the -nostartfiles linker flag
 - rename the init procedures to a generic name without implicit semantics
 - explicitely annotate those init procedures as constructors

The patch has been taken from the Alpine Linux distribution at
http://git.alpinelinux.org/cgit/aports/tree/main/ebtables/fix-extension-init.patch

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-24 15:59:36 +02:00
Kevin Darbyshire-Bryant
d4ede1c118 base-files: sysfixtime no longer exclude dnsmasq.time
dnsmasq's dnssec time checking method now uses a ntp hotplug mechanism,
therefore dnsmasq.time is redudant and no longer needs to be explicitly
excluded from sysfixtime.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-24 13:56:30 +02:00
Kevin Darbyshire-Bryant
5acfe55d71 dnsmasq: dnssec time handling uses ntpd hotplug
Change dnsmasq's dnssec time check handling to use time validity
indicated by ntpd rather than maintaining a cross boot/upgrade
/etc/dnsmasq.time timestamp file.  This saves flash device wear.

If ntpd client is configured in uci and you're using dnssec, then
dnsmasq will not check dnssec timestamp validity until ntpd hotplug
indicates sync via a stratum change. The ntpd hotplug leaves a status
flag file to indicate to dnsmasq.init that time is valid and that it
should now start in 'check dnssec timestamp valid' mode.

If ntpd client is not configured and you're using dnssec, then it is
presumed you're using an alternate time sync mechanism and that time is
correct, thus dnsmasq checks dnssec timestamps are valid from 1st start.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>

V2 - stratum & step ntp changes indicate time is valid
V3 - on initial flag file step signal dnsmasq with SIGHUP if running
V4 - only accept step ntp changes. Accepting both stratum & step could
result in unpleasant script race conditions
V5 - Actually only accepting stratum is the correct thing to do after
further testing
V6 - improve handling of non busybox ntpd
if sysntpd not executable
  dnsmasq checks dnssec timestamps
else
  sysntp script disabled - look for timestamp file - allows external mechanism to use hotplug flag file
  sysntp script enabled & uci ntp enabled  - look for timestamp file
  sysntp script enabled & uci ntp disabled - dnsmasq checks dnssec
timestamps
fi
2016-06-24 13:53:39 +02:00
Daniel Dickinson
f954f4337b base-files: Add standard os-release file
/etc/os-release is the standard distribution release information
file, therefore add it (and image configuration options for
fields not previously present in LEDE).  Once it is deemed
reasonable the non-standard openwrt_release, openwrt_version,
and device_info files could be removed (that is with this patch
we consider them deprecated in favour of the standard file).

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
2016-06-24 13:52:53 +02:00
John Crispin
27493e82f9 mountd: update to latest git HEAD
adds HFS+ support

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-22 19:32:06 +02:00
Hauke Mehrtens
3f38356893 packages: prefer http over git for git protocol
In company networks everything except the http and https protocol is
often causes problems, because the network administrators try to block
everything else. To make it easier to use LEDE in company networks use
the https/http protocol for git access when possible.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-22 19:32:06 +02:00
Mathias Kresin
b32eb40210 uboot-lantiq: Add Arcadyan ARV7506PW11 support
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-22 19:32:06 +02:00
Daniel Gimpelevich
7385f754b1 lantiq: Correct ADSL race condition
puts br2684ctl init after ADSL init instead of before, so that the ESI
is set at the right time, and for consistency with the PTM driver.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2016-06-22 19:32:06 +02:00
Ben Greear
040ebe2473 ath10k-ct: Update to latest 10.4.3 CT firmware for 9980 chipsets.
This works around regressions added in the 4.7 kernel.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-06-21 13:44:12 +02:00
Kevin Darbyshire-Bryant
5d60bedcb3 ath10k-firmware: fix board-2.bin download URL
Original URL got 303 redirect which then also dropped the commit id
leading to different file revision & MD5 mismatch.

Corrected URL & clarified commit ID use in Makefile

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-21 12:00:10 +02:00
John Crispin
163cc22643 procd: properly set /dev/snd permission and group
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-20 11:48:02 +02:00
Xotic750
e2d2b136b3 e2fsprogs: Bump to v1.43.1
Signed-off-by: Graham Fairweather <xotic750@gmail.com>
2016-06-20 11:45:45 +02:00
Mathias Kresin
ac1cc30cdf lantiq: ltq-atm: fix xrx200 depends
This one was missed by abc346db0e.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-20 11:45:44 +02:00
John Crispin
e4bad7953b fstools: fix missing dependency
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-18 17:07:44 +02:00
Rafał Miłecki
7e08f2ccbd mtd: support -c (datasize) option for fixseama command
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-20 08:01:31 +02:00
Daniel Golle
fac7ba1abc uboot-envtools: add support for ZBT-WG2626
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-19 16:22:23 +02:00
Felix Fietkau
240137a744 mt76: update to the latest version, fixes a SMPS handling issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 14:51:11 +02:00
John Crispin
16e04fd1b4 procd: update to latest git head
fixes !root perms of /var/{run,lock,state}

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 04:13:07 +02:00
John Crispin
87eb8fad13 base-files: remove fstab symlink
the symlink no longer gets used since we switched to the block-mount tool.

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 04:13:07 +02:00
John Crispin
ea828eb3af mountd: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-17 04:13:07 +02:00
Felix Fietkau
4bab4dee84 ath10k: merge some more pending upstream fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-17 14:12:44 +02:00
Felix Fietkau
475e94b1d2 uhttpd: update to the latest version, adds some extensions to handler script support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-16 19:00:16 +02:00
Rafał Miłecki
952beca4aa uclient: update to the latest version with better help and DELETE
This slightly improves output of help messages and supports sending
message body for DELETE.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-16 14:54:25 +02:00
Felix Fietkau
4e0a533f60 hostapd: fix breakage with non-nl80211 drivers
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 19:28:55 +02:00
Jo-Philipp Wich
e2a9c638e7 hostapd: fix compilation error in wext backend
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-15 19:10:32 +02:00
Felix Fietkau
70bb22037a hostap-driver: mark as broken, it causes extra bloat in hostapd and is probably not used anymore
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 18:27:44 +02:00
Felix Fietkau
c2ec43733a mt76: update to latest version, adds survey support for mt76x2
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 17:50:51 +02:00
Felix Fietkau
ef74d5cbf8 hostapd: implement fallback for incomplete survey data
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 17:31:48 +02:00
Felix Fietkau
13b44abcff hostapd: update to version 2016-06-15
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 17:11:43 +02:00
Michal Hrusecky
b67af71181 hostapd: Update to version 2016-05-05
Fixes CVE-2016-4476 and few possible memory leaks.

Signed-off-by: Michal Hrusecky <Michal.Hrusecky@nic.cz>
2016-06-15 17:11:18 +02:00
Felix Fietkau
a3cde627f8 libubox: update to the latest version, fixes an uloop signal handling race condition
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 17:01:15 +02:00
Felix Fietkau
8e70655f35 mt76: update to the latest version, fixes a monitor mode injection crash
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-15 15:00:14 +02:00
John Crispin
abc346db0e package/lantiq: make lantiq kernel modules work with xway_legacy
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:43 +02:00
John Crispin
6ccf400be1 fstools: split snapshot-tool into its own package
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:43 +02:00
John Crispin
fd7e15d493 fstools: remove bogus warning in the fstab script
/etc/init.d/fstab had some warnings in it to let users know that they
should call "block mount" directly. these ended up in the bootlog.
fix this by splitting the code into boot() and start(). this way the system
will boot without warning but manually starting the script will lead to the
message.

fixes FS#3

Reported-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:43 +02:00
Magnus Kroken
4260d11e8b openvpn: update to 2.3.11
Security fixes:
* Fixed port-share bug with DoS potential
* Fix buffer overflow by user supplied data

Full changelog: https://community.openvpn.net/openvpn/wiki/ChangesInOpenvpn23#OpenVPN2.3.11

Signed-off-by: Magnus Kroken <mkroken@gmail.com>
2016-06-13 22:51:43 +02:00
Yousong Zhou
8bd02b1381 strace: add option for enabling stack trace support
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-06-13 22:51:43 +02:00
Yousong Zhou
987f14ab23 libunwind: initial version 1.1
The package Makefile was based on work at link [1] with the following
changes

 1. Disable minidebuginfo support thus no dependency on liblzma
 2. Add 2 patches for building against musl-libc and building with
    mips16 enabled
 3. Add LICENSE and DEPENDS info, etc.

[1] https://github.com/rpi-openwrt/rpi-packages/tree/master/libs/libunwind

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
2016-06-13 22:51:43 +02:00
John Crispin
9ba0dc602f ubox: update to latest git HEAD
this adds the new getrandom wrapper tool

Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:42 +02:00
Alexey Brodkin
1f0a9715d2 package/devel/gdb-arc: Add target GDB for ARC
ARC port of GDB is not yet upstream so we need to use
sources from Synopsys GitHub repo.

Given Synopys' commitment to upstream ARC support in GDB
in the nearest future it might be simpler to add a separate
package for ARC GDB instead of patching generic GDB package.
This way once ARC GDB stuff gets uptreamed we'll only need
to remove that new "gdb-arc" package.

Note 1 very minor change in generic gdb package was done -
it now depends on !arc (while "gdb-arc" depends on "arc").

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-06-13 22:51:42 +02:00
John Crispin
928163bad2 uboot-envtools: add ipq806x support
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Adrian Panella
2177a2a8cb mtd: add linksys_bootcount for ipq806x
Reset bc is needed for Linksys EA8500's dual boot.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Adrian Panella
c354591d1b mac80211: ath10k fix otp check patch
Fix patch to match new updated package version

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
John Crispin
62dc9831d3 package/*: update git urls for project repos
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:41 +02:00
Rafał Miłecki
399d214d05 oseama: support extracting entity
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-13 22:53:07 +02:00
Pavel Kubelun
233ec51217 ath10k-firmware: add QCA9984 firmware
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-06-13 12:49:34 +02:00
Felix Fietkau
704965d93f uboot-envtools: add config for WBMR300 (lantiq)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-12 14:53:18 +02:00
Felix Fietkau
df7af9317b ath10k: merge some pending stability fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-11 09:51:23 +02:00
Jo-Philipp Wich
9e45f9d63c polarssl: enable AES-GCM and CAMELLIA-GCM ciphersuites
Recent versions of Chrome require this ciphers to successfully handshake with
a TLS enabled uhttpd server using the ustream-polarssl backend.

If `CONFIG_GCM` is disabled, `ssl_ciphersuite_from_id()` will return `NULL`
when cipher `0x9d` is looked up, causing the calling `ssl_ciphersuite_match()`
to fail with `POLARSSL_ERR_SSL_INTERNAL_ERROR`.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-11 03:24:57 +02:00
Rafał Miłecki
4b03e4ac3b mtd: fix typo in error message for 'c' option
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-06-11 01:37:49 +02:00
Jo-Philipp Wich
dd182011e1 swconfig: improve failure reporting
Report the translated error to the user if a get/set netlink operation failed.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-11 00:51:22 +02:00
Kevin Darbyshire-Bryant
e815036460 dnsmasq: support hostid ipv6 address suffix option
Add support for hostid dhcp config entry to dnsmasq. This allows
specification of dhcpv6 hostid suffix and works in the same way as
odhcpd.

Entries in auto generated dnsmasq.conf should conform to:

dhcp-host=mm:mm:mm:mm:mm:mm,IPv4addr,[::V6su:ffix],hostname

example based on sample config/dhcp entry:

config host
        option name 'Kermit'
        option mac 'E0:3F:49:A1:D4:AA'
        option ip '192.168.235.4'
        option hostid '4'

dhcp-host=E0:3F:49:A1:D4:AA,192.168.235.4,[::0:4],Kermit

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-10 18:16:47 +02:00
Scott Shambarger
4b8f0a2d26 mac80211: fix calculation of VHT capability values
- Fix calculation of `$vht_cap` bit field
 - Replace wrong reference to `$tx_stbc` variable with proper `$tx_stbc_2by1` one
 - Emit proper `RX-STBC-{1,12,123,1234}` tokens for the VHT capability list

See https://dev.openwrt.org/ticket/22535 for reference.

Signed-off-by: Scott Shambarger <devel@shambarger.net>
2016-06-10 18:08:30 +02:00
Hans Dedecker
96db69bd45 busybox: Call ntpd hotplug script for every action
Daemons that are waiting for a timesync are only triggered when the action is stratum.
As step is the first sync action pass all actions to the ntpd hotplug scripts; it's up
to the ntpd hotplugscript to filter out the actions it is interested in.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-06-10 18:05:08 +02:00
Hans Dedecker
7eaacd4d23 dnsmasq: Add option --max-port
By default dnsmasq uses random ports for outbound dns queries;
when the maxport UCI option is specified the ports used will
always be smaller than the specified value.
This is usefull for systems behind firewalls.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-06-10 18:05:07 +02:00
Felix Fietkau
a88fc0db9d xtables-addons: add missing dependency
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-09 15:53:43 +02:00
Hannu Nyman
efa740b08b ubox: increase default size of system log buffer to 64 kB
Increase the default system log buffer size
from 16 kB (default both in logd source and in the startup script)
to 64 kB by adjusting the default value in startup script.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-06-07 23:13:29 +02:00
Hannu Nyman
df7581e4c0 base-files: increase default system log size to 64 kB
Increase the default system log buffer size
from 16 kB (built-in default in ubox logd)
to 64 kB by setting the option in /etc/config/system.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-06-07 23:13:29 +02:00
Álvaro Fernández Rojas
c17f02d2f2 brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-06-08 19:09:58 +02:00
Jo-Philipp Wich
35b33f0413 base-files: maintain LED config state
Record the state of any hardware LED configured through UCI and use that
information to revert the state when applying updated settings while
maintaining default behaviour of system LEDs.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 10:34:50 +02:00
Felix Fietkau
d6ad9d3e9c base-files: fix /bin/config_generate breakage
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-08 07:32:30 +02:00
Felix Fietkau
57343b210a uboot-lantiq: get rid of bogus profile dependencies
Turn them into subtarget dependencies instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-08 06:42:42 +02:00
Jo-Philipp Wich
924302ba36 base-files: drop /etc/config/system
The board_detect framework is now able to create the entire system config from
scratch so we can finally drop the copy shipped by base-files.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:34:02 +02:00
Jo-Philipp Wich
b98f78b1c1 base-files: rework config generation logic
Now that config_generate is able to generate the entire /etc/config/system
from scratch we can apply the same logic as used for /etc/config/network;
when the configuration file exists already then do not do anything, else
generate it from the values provided by /etc/board.json .

In order to facilitate that move the file existance checking inside
/bin/config_generate and call it unconditionally from /bin/board_detect.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:34:02 +02:00
Jo-Philipp Wich
07f03d0833 base-files: support port_state LED types in board.d
Add support for handling port_state LEDs as used by ADM5120.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:31:09 +02:00
Jo-Philipp Wich
528b8f6f93 base-files: support hostname and ntp servers through board.d
Add support for specifying hostname and NTP servers via /etc/board.d/ scripts.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-08 00:31:09 +02:00
Dirk Neukirchen
652ac2c6fd xtables-addons: update to 2.11
- fix compilation w. Kernel 4.6 due to
hash->shash crypto API
- remove a patch integrated upstream

- remove unrecognized configure option
removed upstream in 2010
commit 40d0345f1ed02de183b13a6ce38847bc1f4ac48e

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-07 23:03:11 +02:00
Matteo Panella
20c608db0a openvpn: add support for tls-version-min
Currently, the uci data model does not provide support for specifying
the minimum TLS version supported in an OpenVPN instance (be it server
or client).

This patch adds support for writing the relevant option to the openvpn
configuration file at service startup.

Signed-off-by: Matteo Panella <morpheus@level28.org>
[Jo-Philipp Wich: shorten commit title, bump pkg release]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-07 23:02:58 +02:00
Jo-Philipp Wich
33a4d22f4c base-files: reset LED state
Attempt to reset all LED states before applying the UCI configuration to
avoid leaving disabled LEDs behind in lingering glowing state, e.g. when
changing the sysfs entry in the config from one hardware LED to another.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-07 23:01:58 +02:00
Jo-Philipp Wich
24a7ccb056 treewide: replace jow@openwrt.org with jo@mein.io
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-07 11:42:52 +02:00
Karl Palsson
9b118cde89 wolfssl: enable openssl 1.0.1 compatibility
>From wolfssl/openssl/opensslv.h, and from skimming the contents of what
"--enable-stunnel" actually does, it seems that --enable-opensslextra
doesn't give you the "full" openssl compatibility that you may wish for
these days.  Unfortuantely, while wolfssl writes the build time options
into wolfssl/options.h, it doesn't include that file itself.  User
applications must include that directly.

Signed-off-by: Karl Palsson <karlp@etactica.com>
2016-06-07 09:22:16 +02:00
Felix Fietkau
d84bf324ba ustream-ssl: update to the latest version, adds cyassl/wolfssl fixes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 09:22:11 +02:00
Felix Fietkau
7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Hannu Nyman
1a3c56f832 kmod-sched-cake: Add support for cake qdisc
Add 'cake' qdisc kernel module package.

V2 - KDB Small update to base on latest cake tc changes (wash option
deprecated)
V3 - KDB Move kmod-sched-cake package to kernel as is kernel related
V4 - KDB Split into individual patches, kmod & tc

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-06 14:58:11 +02:00
Hannu Nyman
23147dd43a iproute2: Add support for cake qdisc
Add cake support to 'tc' in iproute2
  - Use a patch to modify tc instead of adding a new tc-adv package.
    Patch creates q_cake.c that matches commit 3314230bc4
  - Do not include the other things from tc-adv (cake0, cake2, pie etc.).

V2 - KDB Small update to base on latest cake tc changes (wash option
deprecated)
V3 - KDB Move kmod-sched-cake package to kernel as is kernel related
v4 - KDB Split into individual patches, tc & kmod

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-06 14:58:11 +02:00
Dirk Neukirchen
34a3ec9c63 modules: add missing module to ipsec description
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-06 14:58:11 +02:00
John Crispin
7cc4fa1ae1 procd: fix file permissions of /dev/tty* nodes
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-06 14:58:11 +02:00
Felix Fietkau
754565a84b netifd: update to the latest version
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-06 15:46:35 +02:00
Waldemar Brodkorb
5d8ece87a4 util-linux: fix scanf fallback detection for uClibc-ng
uClibc-ng pretends to be GNU libc 2.2 and then a fallback
scanf check is tried, so that libmount is disabled
afterwards. Add a fix already suggested upstream.
Add librt dependency required for other apps, too.

Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
2016-06-05 23:23:57 +02:00
John Crispin
f02184cbcf ubus: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-05 23:23:57 +02:00
John Crispin
9363259abe procd: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-05 23:23:57 +02:00
Daniel Golle
3ec4803932 mac80211: respect user-set regulatory domain by default
It turns out most device vendors don't set the correct country code
in their devices' on-flash-EEPROM sections as they apparently rather
provide a complete per-target-market firmware with patched drivers
instead of just setting the country code.
This results in the driver to incorrectly assume the value stored in
the on-flash-EERPOM (usually US or China) being the regulatory domain
inside which the device is being used.
To work around this issue, OpenWrt introduced the ATH_USER_REGD config
variable to decide during build whether or not to allow the user to
override the regulatory domain setting. This option, however, is not
enabled by default and thus ends up being disabled for snapshots builds
and released binaries.
As we know for a long time that most devices got borked regulatory
domain values set in their EEPROMs we should allow our users to respect
their local law (instead of just assume US or China laws).
Note that also the current default has great potential of users not
ever setting their regulatory domain and thus using inapproriate and
potentially illegal frequencies and/or tx-power settings

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-06-05 13:37:55 +02:00
Ben Greear
56b377304e ath10k: support CT firmware choices.
This allows one to select CT firmware for ath10k
if one prefers to try this firmware instead of stock
ath10k firmware.

The 10.1 (988X) firmware can actually be installed beside the
default firmware, but it will not be used as long as the firmware-5.bin
file exists.  Users could rename the files and reboot to use different
images.

The 99X0 (wave-2) firmware  uses the same firmware-5.bin name as default
firmware, so it cannot be installed at the same time as default firmware.

Signed-off-by: Ben Greear <greearb@candelatech.com>
2016-06-05 12:48:02 +02:00
Alexander Couzens
297142464a kernel/spi: add kernel package for spi-omap-24xx
spi-omap-24xx can be found in TI based SoC like the beaglebone black

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-02 21:58:10 +02:00
Alexander Couzens
49cf356710 kernel: add random-omap rng for omap
Kernel module for the OMAP Random Number Generator
found on OMAP16xx, OMAP2/3/4/5 and AM33xx/AM43xx
multimedia processors.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-02 21:58:10 +02:00
Alexander Couzens
9128ed33b5
add usb gadget ehci debug driver
This gadget driver allow to debug other devices via EHCI Debug Port
capability.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-06-01 17:56:52 +02:00
Jo-Philipp Wich
83390271f9 jsonfilter: fix printing 64bit values
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-01 16:54:04 +02:00
Dirk Neukirchen
872075c761 elfutils: remove unrecognized config option
fixes:
configure: WARNING: unrecognized options: --disable-werror

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-01 15:18:42 +02:00
Dirk Neukirchen
75dc12dac1 libpcap: remove unrecognized configure options
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-01 15:18:42 +02:00
Dirk Neukirchen
04cb722e9f openvpn: remove unrecognized option
removed upstream in
9ffd00e754
now its always on

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-06-01 15:18:42 +02:00
Felix Fietkau
5770678122 mt76: disable build for linux 3.18
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-01 01:15:20 +02:00
Felix Fietkau
b08dbd3acf mac80211: disable iwlwifi build for linux 3.18
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-01 01:14:31 +02:00
Florian Eckert
44b82ab77a libiconv-full: add license tag
show the license for this package in opkg

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-05-31 14:54:19 -04:00
Florian Eckert
5ac43d6ec2 px5g: add license tag
show the license for this package in opkg

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-05-31 14:54:19 -04:00
Florian Eckert
c7d6a924ac usbutils: add license tag
show the license for this package in opkg

Signed-off-by: Florian Eckert <Eckert.Florian@googlemail.com>
2016-05-31 14:54:19 -04:00
Jo-Philipp Wich
927ab9a262 gettext-full: prevent using emacs
When the gettext-full host build phase finds an `emacs` exectuble during the
build it will launch an `emacs --batch` command to run some Lisp code.

On certain Debian systems the `/usr/bin/emacs` path might point, via
alternatives, to the `/usr/bin/jove` editor which will then launch an
interactive session when invoked by the gettext build.

In order to avoid this problem, explicitely disable emacs handling during
the build through a configure environment variable.

Also remove my now unreachable maintainer address.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-31 15:18:27 +02:00
Maxim Storchak
442ff3b34d busybox: run sysntpd at higher priority
When a router is under load ntpd would have better chance to accurately
maintain system time.

Signed-off-by: Maxim Storchak <m.storchak@gmail.com>
2016-05-30 22:53:35 +02:00
Daniel Gimpelevich
96ad827e17 lantiq: fix segfault inside ltq-adsl-app
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2016-05-27 16:08:47 +02:00
Daniel Gimpelevich
8333a6d0ba lantiq: Reduce ugliness of ugly hack
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2016-05-27 16:08:47 +02:00
Ash Benz
867c0cb237 kernel/mac80211: skip ath10k OTP check if caldata found
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Mathias Kresin
c065cb08db uboot-lantiq: VGV7510KW22 - remove NOR SPL leftovers
Missed this one with my last cleanup patch.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
b0a202ebdc uboot-lantiq: Add Arcadyan VGV7519 support
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.

Major cleanup and addition of brnboot second stage u-boot was done by
me.

The second stage brnboot u-boot is untested, since the brnboot prompt
is secured by a still unknown password. But should work.

The former ram values are replaced with the ram values extracted from
the original brnboot. The old ones didn't worked with the ramboot
image.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
ecf10d3796 uboot-lantiq: vrx200 - lzma compress gphy firmware
The default bootloader partition of some devices is to small for an
u-boot with uncompressed gphy firmware(s).

Instead of increasing the bootloader partition size, in compare to the
stock firmware, compress the firmware. This would allow the bootloader
of at least the FritzBox 3370 as well as the bootloader of the
VGV7510KW22 to fit into the bootloader partition of the stock firmware.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
8df4eb0b9b uboot-lantiq: vrx200 - add support for dual nor flash
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.

Devices like the xrx200 Arcadyan VGV7519 are using two NOR flash chips.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Rafał Miłecki
cdff540623 mac80211: brcmfmac: return -ENFILE if interface exists
This makes brcmfmac compatible with mac80211 which uses dev_alloc_name
(and so returns -ENFILE on error).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-30 08:25:44 +02:00
Rafał Miłecki
efcaa046b7 mac80211: change default SSID from Lede to LEDE
LEDE project seems to be using "LEDE" as its acronym everywhere. To keep
things consistent adjust default wireless SSID.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Alexander Couzens <lynxis@fe80.eu>
2016-05-29 16:22:47 +02:00
Jo-Philipp Wich
c4879556fe kernel: fix dependency chain of kmod-igb
The igb kmods selects kmod-i2c-algo-bit which in turn is invisible until
kmod-i2c-core gets selected, causing kmod-igb to be hidden from menuconfig
as well.

Let kmod-igb select kmod-i2c-core as well in order to make it visible
in menuconfig right away.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-28 09:14:55 +02:00
Dirk Neukirchen
6c1eb4441e util-linux: fix breakage
- install correct libs to staging/usr/lib
fixes eudev, nfs-kernel-server

the lib*.a seem broken - use the correct .so files
and remove .a libs

- some build breakage was observed with parallel builds:
text-utils/more-more.o: In function `putstring':
more.c:(.text+0x1f4): undefined reference to `tputs'
text-utils/more-more.o: In function `initterm':
more.c:(.text+0x1b74): undefined reference to `setupterm'
more.c:(.text+0x1f0c): undefined reference to `tparm'
more.c:(.text+0x20ac): undefined reference to `tigetnum'
more.c:(.text+0x20c8): undefined reference to `tigetflag'
more.c:(.text+0x20ec): undefined reference to `tigetstr'
more.c:(.text+0x2148): undefined reference to `PC'
text-utils/more-more.o: In function `reset_tty':
more.c:(.text+0x2630): undefined reference to `tputs'

- fix line length

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-05-28 09:14:55 +02:00
Jo-Philipp Wich
7f69458296 base-files: rework postinstall uci-defaults handling
Some package postinstall operations, e.g. those emitted by the LuCI build
system, source and delete the uci-defaults themselves upon package insteall,
causing the generic defaults apply code to trigger shell errors like:

    .../luci-app-ddns.postinst: .: line 130: can't open './40_luci-ddns'

Rework the generic apply code to check the existence of the uci-defaults
script before trying to source it, use sed to prefilter the list of entries
from the control file and perform the directory change in a subshell,
avoiding the need for cd $OLDPWD.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-27 10:27:45 +02:00
Dirk Neukirchen
749d4b77bd util-linux: fix sfdisk
reported by reproducible openwrt project[1]:
we package some libtool shell script

- add missing dependencies
- fix paths
- make in InstallDev does not seem to be necessary

tested (cal,dmesg,sfdisk) on x86 qemu VM with allyesconfig

[1]: https://reproducible.debian.net/openwrt/openwrt.html

[Jo-Philipp Wich: fix double slash in sfdisk path, reword commit message]

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-27 10:27:45 +02:00
Alexey Brodkin
dc44b2bd62 procd: Update to latest head
This includes a fix for building against uClibc:
http://git.openwrt.org/?p=project/procd.git;a=commit;h=9a6f83d3c168523ac7b898ae481c2fd8c501d6a6

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: John Crispin <john@phrozen.org>
2016-05-24 17:03:02 +02:00
Daniel Engberg
32ae0da2b7 iproute2: Use URL alias
Remove hardcoded URLs and use alias instead.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-05-24 19:42:49 +02:00
Daniel Engberg
6e7403e1e6 iw: Use URL alias
Remove hardcoded URL and use alias instead.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-05-24 19:41:52 +02:00
Jo-Philipp Wich
f6785e33a0 jsonfilter: allow empty paths
Allow path specifications to refer to just '@' or '$' which is useful for
exporting the keys or array indizes of the toplevel object to the shell.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-24 17:15:44 +02:00
Dario Ernst
4d1c75c601 dropbear: Fix incorrect CONFIG_TARGET_INIT_PATH.
Fix a „semantic typo“ introduced in b78aae793e,
where TARGET_INIT_PATH was used instead of CONFIG_TARGET_INIT_PATH.

Signed-off-by: Dario Ernst <Dario.Ernst@riverbed.com>
2016-05-24 16:31:17 +02:00
Jo-Philipp Wich
1012701014 x86: generalize partition discovery for sysupgrade
Generalize the partition discovery in sysupgrade in order to fix sysupgrade
and config backup/recovery on MMC block devices which use a different naming
scheme compared to mtdblock or sd* devices.

The change also adds the find applet to the ramdisk utilities so that upgrade
code can rely on it.

The commit is based on the initial submission by Russell Senior at
http://patchwork.ozlabs.org/patch/625440/ .

Signed-off-by: Russell Senior <russell@personaltelco.net>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-24 13:30:58 +02:00
Hannu Nyman
3193053df7 Centralize setting of all version info to include/version.mk
Centralize setting all version information in include/version.mk
* Set RELEASE env variable in include/version.mk instead of toplevel.mk.
  Stop exporting the variable.
* Remove hardcoded release name from /etc/banner

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
2016-05-24 13:30:58 +02:00
Hans Dedecker
6707d9750a busybox: sysntpd - Support for NTP servers received via DHCP(v6)
The busybox ntpd utility currently uses ntp servers specified in uci.
This patch allows the ntpd utility to use NTP servers received via DHCP(v6)
Following uci parameters have been added:
    use_dhcp : enables NTP server config via DHCP(v6)
    dhcp_interface : use NTP servers received only on the specified DHCP(v6) interfaces; if empty all interfaces are considered

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-05-24 13:30:58 +02:00
Daniel Dickinson
2ac21bd793 dnsmasq: Set the default dhcp lease file and resolv file
Instead of making assumptions about the leasefile and resolv file make sure
we use what the user configures, but fall back to defaults if no configuration
is specified

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
2016-05-24 13:30:58 +02:00
Daniel Engberg
76d8f6c41f usbutils: Use github alias
Instead of hardcoding URL to Github use alias.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-05-24 13:30:58 +02:00
Kevin Darbyshire-Bryant
a6e96998fb dnsmasq: update to dnsmasq v2.76
Update to dnsmasq2.76.  Refresh patches.  Add new patch to fix musl
'poll.h' location warning.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-05-24 13:30:58 +02:00
Alin Năstac
0cc58a0f98 conntrack: enable support for netfilter conntrack zones
Storage of such zones is provided by a nf_ct_ext struct, hence conntrack
memory foot print will not be increased if zones are not used.

Signed-off-by: Alin Năstac <alin.nastac@gmail.com>
2016-05-24 13:30:57 +02:00
Dirk Neukirchen
4c4497ec0d package: spidev_test: update location for >Kernel 4.5
- document indirect source code fixup affecting spidev_test

v2: check against old Kernel versions

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-05-23 13:39:50 +02:00
Sven Eckelmann
3f508fce77 package/uboot-envtools: add OpenMesh MR1750v2 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:26 +02:00
Sven Eckelmann
e1357c09d4 package/om-watchdog: add OpenMesh MR1750v2 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:25 +02:00
Sven Eckelmann
00943e0931 package/uboot-envtools: add OpenMesh OM2P-HSv3 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:24 +02:00
Sven Eckelmann
f3ac61850d package/om-watchdog: add OpenMesh OM2P-HSv3 support
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-05-23 12:19:24 +02:00
John Crispin
a39ac242cc base-files: fix some failsafe issues
* if the shell was closed booting continued

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:25 +02:00
John Crispin
5dc80cbcff fstools: update to latest git version
* adds support for ACL mount flags
* adds vfat fsck support

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:25 +02:00
John Crispin
12a24b6564 procd: update to latest head
fixes /dev/console handling during early boot

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:25 +02:00
Mathias Kresin
e81acacaa3 uboot-lantiq: ARV752DPW - use correct switch driver
There is no RTL8206 switch driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
a22feb4c78 uboot-lantiq: VGV7510KW22 - use ddr ram params from brnboot
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
382282eca9 uboot-lantiq: VGV7510KW22 - use leds to indicate boot status
Switch on the red power led if kernel image can't be loaded. Otherwise
switch the green led on.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
9e8edcff99 uboot-lantiq: VGV7510KW22 - cleanup board config
According to the author, all SPI related configs are copy & paste
leftovers. Which makes sense since nothing is connected to the SPI bus
on this device.

The NOR SPL isn't required for this board, since the NOR is directly
memory mapped.

Allow to overwrite the env in ram while using brn variant. Do not set
the power GPIO pin twice.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
b3795d0c93 uboot-lantiq: reorder and rework patches
use:
  - 00nn for u-boot patches
  - 01nn for new boards

While doing the rework, the board definitions for the easy50712 and
easy80920 were moved to distinct board definitions patches.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
74b1687be3 uboot-lantiq: drop unused board patches
None of the boards is supported by lede. No need to keep the patches in
the lede tree.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
John Crispin
31293752c8 mdns: update to latest git HEAD
* fixes loopback handling

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 10:26:32 +02:00
Felix Fietkau
2c9c998b4a mwlwifi: remove the a-mpdu failure messages entirely instead of hiding them in the debug log
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-22 15:51:21 +02:00
Felix Fietkau
7ae6b912ae libpcap: set a static default for PCAP_HAS_USB
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 20:02:10 +02:00
Felix Fietkau
f849c2c832 mvebu: enable core drivers in the kernel config instead of packaging them
Simplify profile package selection

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 19:57:06 +02:00
Felix Fietkau
4926e4b1ae mwlwifi: fix excessive logspam if starting a BA session fails
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
29ad4d2a0c mwlwifi: fix excessive use of busy-waiting that was tripping up the flash driver
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
ab5e07f731 mwlwifi: update to 10.3.0.17-20160520-1
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 18:08:29 +02:00
Felix Fietkau
b570c0c88e uhttpd: use configured distribution name for SSL certificate CN
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 12:42:44 +02:00
Dirk Neukirchen
de27a1adae cyassl/wolfssl: update to 3.9.0
wolfssl has a fine grained feature and compatibility control
for compiling stunnel, lighthttp or (partly) openssl dropin
ustream-ssl uses features that require normally
HAVE_SNI, HAVE_STUNNEL and the openssl compatibility headers

ar71xx ipkg sizes of wolfssl 3.9.0:
- with stunnel: 144022
- this patch (w.o. stunnel): 131712
- without openssl(extra): 111104
- w.o openssl/sni:108515
- w.o openssl/sni/ecc: 93954

so patch 300 saves around 12k compressed ipkg size

v2: keep & rename patch 300 for clarity, fixes ustream-ssl/cyassl
that broke with v1

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-05-21 09:57:12 +02:00
Felix Fietkau
48ff6eff8c mac80211: add missing config symbols to PKG_CONFIG_DEPENDS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-21 00:11:55 +02:00
Rafał Miłecki
1050a609cf nvram: install init.d quirks script on brcm47xx only
It contains some quirks for old MIPS devices.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-20 22:33:15 +02:00
Felix Fietkau
0d476971f2 kernel: define CONFIG_CPU_THERMAL in kmod-thermal
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:38:09 +02:00
Felix Fietkau
c115058669 libubox: update to the latest version
adds a SIGCHLD handling fix and jshn performance improvements

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-20 14:37:52 +02:00
Kevin Darbyshire-Bryant
8d105653b1 base-files: sysfixtime typo in exclude dnsmasq.time
Typo, missing space before ] in previous commit caused shell syntax
failure and incorrect restoration of time.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-05-19 18:14:28 +02:00
Felix Fietkau
24270e9493 mac80211: fix unaligned accesses in the tx path
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-19 17:55:54 +02:00
Felix Fietkau
1d0d5ddb07 curl: remove axtls config option, the library does not exist in our tree
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-19 16:56:34 +02:00
Dirk Neukirchen
6aebc6b16b curl: update to 7.49
fixes:
 CVE-2016-3739: TLS certificate check bypass with mbedTLS/PolarSSL

- remove crypto auth compile fix
curl changelog of 7.46 states its fixed

- fix mbedtls and cyassl usability #19621 :
add path to certificate file (from Mozilla via curl) and
provide this in a new package

tested on ar71xx w. curl/mbedtls/wolfssl

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-05-19 16:56:34 +02:00
Dirk Neukirchen
f2220bc1fe perf: disable libcrypto dependency
upstream change: 8ee4646038e47d065d35703e3e343136c4cd42aa
fixes dependency w. Kernel 4.6

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-05-19 14:12:11 +02:00
Kevin Darbyshire-Bryant
7938e8d60a dnsmasq: sysupgrade hook to conditionally preserve dnsmasq.time
conditionally save dnsmasq.time across sysupgrade
dnsmasq uses /etc/dnsmasq.time as record of the last known good
system time to aid its validation of dnssec timestamps.  dnsmasq
updates the timestamp on process start/stop once it considers the system
time as valid. The timestamp file should be preserved across system
upgrade but should not be included as part of normal configuration
backups to prevent restores corrupting the current timestamp.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-05-19 10:28:18 +02:00
Kevin Darbyshire-Bryant
2b1556d3e0 base-files: sysfixtime exclude dnsmasq.time
dnsmasq maintains dnsmasq.time across reboots and uses it as a means of
determining if current time is good enough to validate dnssec time
stamps.  By including /etc/dnsmasq.time as a time source for sysfixtime,
the mechanism was effectively defeated because time was set to the
last time that dnsmasq considered current even though that time is in
the past.  Since that time is out of date, dns(sec) resolution would
fail thus defeating any ntp based mechanisms for setting the clock
correctly.

In theory the process is defeated by any files in /etc that are newer
than /etc/dnsmasq.time however dnsmasq now updates the file's timestamp
on process TERM so hopefully /etc/dnsmasq.time is the latest file
timestamp in /etc as part of LEDE shutdown/reboot.

Either way, including /etc/dnsmasq.time as a time source for
sysfixtime is not helpful.

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-05-19 10:28:18 +02:00
Jo-Philipp Wich
85a59127a7 Revert "dnsmasq: sysupgrade hook to conditionally preserve dnsmasq.time"
This reverts commit d830cb0882.

Reverting this commit due to a missing Signed-off-by.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-19 10:28:17 +02:00
Jo-Philipp Wich
21f460e0c1 Revert "base-files: sysfixtime exclude dnsmasq.time"
This reverts commit 382779e009.

Reverting this commit due to a missing Signed-off-by.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-19 10:28:11 +02:00
Kevin Darbyshire-Bryant
d830cb0882 dnsmasq: sysupgrade hook to conditionally preserve dnsmasq.time
conditionally save dnsmasq.time across sysupgrade
dnsmasq uses /etc/dnsmasq.time as record of the last known good
system time to aid its validation of dnssec timestamps.  dnsmasq
updates the timestamp on process start/stop once it considers the system
time as valid. The timestamp file should be preserved across system
upgrade but should not be included as part of normal configuration
backups to prevent restores corrupting the current timestamp.
2016-05-18 22:17:33 +02:00
Kevin Darbyshire-Bryant
382779e009 base-files: sysfixtime exclude dnsmasq.time
dnsmasq maintains dnsmasq.time across reboots and uses it as a means of
determining if current time is good enough to validate dnssec time
stamps.  By including /etc/dnsmasq.time as a time source for sysfixtime,
the mechanism was effectively defeated because time was set to the
last time that dnsmasq considered current even though that time is in
the past.  Since that time is out of date, dns(sec) resolution would
fail thus defeating any ntp based mechanisms for setting the clock
correctly.

In theory the process is defeated by any files in /etc that are newer
than /etc/dnsmasq.time however dnsmasq now updates the file's timestamp
on process TERM so hopefully /etc/dnsmasq.time is the latest file
timestamp in /etc as part of LEDE shutdown/reboot.

Either way, including /etc/dnsmasq.time as a time source for
sysfixtime is not helpful.
2016-05-18 22:17:33 +02:00
Daniel Dickinson
3e08637e87 mdadm: Fix missing conffile and add initscript
Start arrays on boot, stop them on shutdown, and enable
monitoring to syslog.

Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
2016-05-18 22:17:28 +02:00
Daniel Dickinson
3015af9647 ca-certificates: Add certificate bundle package
Some SSL applications requires a certificates bundle rather
than a directory containing certificates.  For thos applications
we build the ca-bundle package

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
2016-05-18 22:17:28 +02:00
Daniel Dickinson
83049ed944 kernel: Build it87 hardware monitor module
Add packaging of it87 hardware monitor kernel module.  It is
a common thermal and voltage monitor that is in many x86
(at least) devices, and is just another i2c hwmon module.

Signed-off-by: Daniel Dickinson <lede@daniel.thecshore.com>
2016-05-18 22:17:28 +02:00
Helmut Schaa
21b04c623e ath9k: Fix TX99 support
The patch 300-ath9k-force-rx_clear-when-disabling-rx.patch broke TX99 support
in ath9k. Fix the patch by only applying rx_clear if TX99 mode is not used.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2016-05-18 15:00:02 +02:00
Helmut Schaa
262cec2fb8 mac80211: Allow selection of TX99 support in ath9k
Add a new config option to enable TX99 support in ath9k.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
2016-05-18 14:59:41 +02:00
Daniel Golle
055d8d9c61 oxnas: move target-specific modules into target's modules.mk
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-17 17:26:05 +02:00
Daniel Golle
449aba4fe8 modules: hwmon: package driver for INA209 power monitor
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-16 18:00:34 +02:00
Daniel Golle
910d9ba454 modules: hwmon: package driver for LTC4151 current sensor
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-16 18:00:34 +02:00
Jo-Philipp Wich
23a1fa07db libusb: disable parallel building
The libusb package is not parallel build save, a make -j16 reliably breaks it.
Forcibly disable parallel building.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-16 17:17:12 +02:00
Felix Fietkau
34b05087f7 mac80211: fix a module build/dependency issue that was breaking lib80211
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-16 10:52:24 +02:00
John Crispin
474d62e31d fstools: update to latest git HEAD
the recent fixes to make mount_root work during failsafe caused lots of
unwanted side effects. use the new preinit sentinel file to detect if
we are in preinit. this will also work if logged in via ssh.

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-15 16:32:02 +02:00
John Crispin
94cc41632e procd: update to latest git HEAD
make procd create a sentinel file during preinit

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-15 16:31:18 +02:00
Felix Fietkau
e30608b736 iw: refresh patches
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 20:55:39 +02:00
Felix Fietkau
df93d53a4b mac80211: update to wireless-testing 2016-05-12
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-15 20:55:39 +02:00
Vittorio G (VittGam)
d742e1b513 base-files: Enhancements to /etc/profile
- Update the terminal window title with the current directory and hostname, if using an xterm-compatible terminal emulator.
- Add ll, an useful alias to ls.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
2016-05-14 16:53:10 +02:00
Syrone Wong
b4c286fa89 nettle: update to 3.2
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
2016-05-13 17:03:54 +02:00
Kevin Darbyshire-Bryant
b40c22630f e2fsprogs: update to 1.42.13
Update e2fsprogs to v1.42.13 from 1.42.12

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-05-13 17:03:53 +02:00
David Thornley
da0226fa7e lua: Fixed broken __lt/__le operators caused by lnum patch.
This was found while investigating why luarocks does not work. It was
traced to a quite old lnum patch for 5.1.3. I compared against the
latest 5.1.4 patch - https://github.com/LuaDist/lualnum and discovered
the lessthan/lessequal evaluation was not falling through to the
call_orderTM (tag methods).

I have tested LuCI (simple tests) and used the following lua code to
validate the patch (both host and target patches supplied): -

> local my_mt = {
> __eq = function(v1, v2)
> print("__eq")
> return false
> end,
> __lt = function(v1, v2)
> print("__lt")
> return false
> end,
> __le = function(v1, v2)
> print("__le")
> return false
> end
> }
>
> function get_my(vstring)
> local my = {}
> my.string = vstring;
> setmetatable(my, my_mt);
> return my;
> end
>
> local a = get_my("1.0")
> local b = get_my("1.0")
>
> local eq_works = a == b;
> local lt_works = a < b;
> local gt_works = a > b;
>
> local lte_works = a <= b;
> local gte_works = a >= b;

Without the patch the following error will be presented: -

“attempt to compare two table values”

Signed-off-by: David Thornley <david.thornley@touchstargroup.com>
2016-05-13 17:03:53 +02:00
Jo-Philipp Wich
1c61b21489 dropbear: update to 2016.73
Update the dropbear package to version 2016.73, refresh patches.
The measured .ipk sizes on an x86_64 build are:

  94588	dropbear_2015.71-3_x86_64.ipk
  95316	dropbear_2016.73-1_x86_64.ipk

This is an increase of roughly 700 bytes after compression.

Tested-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-13 10:23:52 +02:00
Felix Fietkau
98010ab489 kernel: remove ocf support, cryptodev-linux should be used instead
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 19:35:32 +02:00
Felix Fietkau
3d6d5ccf59 openssl: replace ocf-crypto-headers with a header file from cryptodev-linux
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 19:35:32 +02:00
Bert Vermeulen
34b6c8b075 iperf: Drop single-threaded variant
Signed-off-by: Bert Vermeulen <bert@biot.com>
2016-05-12 03:29:36 +02:00
Bert Vermeulen
b4a23f83f9 iperf: Upgrade to version 2.0.8
The original iperf package is unmaintained. This switches to the "iperf2"
project on sourceforge, a fork that started where the previous iperf left
off.

Version 2.0.8 fixes the issue that patch 002 handled, so that can be dropped.

Due to a faulty check in configure.ac, this version needs _GNU_SOURCE
defined to build properly against musl. Various other obsolete build
options were also removed.

Signed-off-by: Bert Vermeulen <bert@biot.com>
2016-05-12 03:29:36 +02:00
John Crispin
b8ab6af1a9 global: change my email address
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-12 03:29:36 +02:00
Andrew Yong
374cae9e6f ramips: add initial support for SamKnows SK-WB8
Signed-off-by: Andrew Yong <me@ndoo.sg>
2016-05-12 03:29:35 +02:00
Hans Dedecker
861266c9ec dropbear: Add --disable-utmpx again
The option --disable-utmpx was deleted by accident in commit 7545c1d;
add it again to the CONFIGURE_ARGS list

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-05-12 03:29:35 +02:00
John Crispin
6a5471231b libusb: remove stale patch
this patch fixes a bug when using uclibc on MIPS. The bug does not exist when
using musl, so drop the fix.

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-12 03:29:35 +02:00
Felix Fietkau
42d2eb7628 build: remove leftover dependenices on TARGET_rdc
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:43:48 +02:00
Felix Fietkau
018807ded3 x86/xen_domu: enable xen drivers in the kernel config instead of packaging them as modules
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:35:46 +02:00
Felix Fietkau
7d7fb75df5 x86: remove the kvm_guest subtarget
32-bit only hardware that supports kvm is very rare.
It's not worth keeping a separate subtarget for this.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 17:00:53 +02:00
Felix Fietkau
46b79085b6 busybox: fix issues with the ip command on mips64
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-12 16:05:23 +02:00
John Crispin
26898d2a7f fstools: update to latest git revision
This fixes mount_root in failsafe and reverts a ext4 overlay patch.

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-11 23:36:18 +02:00
Felix Fietkau
15f88192bf ncurses: add a compatibility symlink for packages searching for ncursesw/ncurses.h
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-11 19:10:22 +02:00
Vittorio Gambaletta (VittGam)
40f933d7ff base-files: Fix config_generate when there are no switch VLANs or ports configured in board.json.
The json_select call fails when there are no roles or ports objects in board.json. "json_select .." must not be executed after failing.

This fixes for example LEDs not being set up in /etc/config/system.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
2016-05-11 17:06:54 +02:00
Hans Dedecker
f9a3123bbf netifd: Remove hardcoded DHCP release option
Remove the udhcpc -R release option as sending a DHCP release
is configurable via the uci option release.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-05-11 16:46:17 +02:00
Felix Fietkau
ef6d6661e2 ncurses: install a dummy libtinfo.a for packages that try to link it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-11 11:39:34 +02:00
Felix Fietkau
cf3da7d204 Revert "ncurses: package the tinfo library separately"
This reverts commit 975f7160dd.
2016-05-11 11:38:55 +02:00
Rafał Miłecki
b9afc86b5c mtd: imagetag: fix compilation with changed mtd_fixtrx call
Function mtd_fixtrx was changed during trx improvements.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-11 01:57:59 +02:00
Felix Fietkau
86777a40e9 gettext-full: avoid spurious dependencies on ncurses
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-10 16:01:38 +02:00
Felix Fietkau
975f7160dd ncurses: package the tinfo library separately
Some packages expect it that way

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-10 16:00:36 +02:00
Bert Vermeulen
fda951c443 iftop: Update to latest version, and drop patch
The patch made sure the ncursesw library was not selected to save space,
but that library doesn't exist in this distribution at all.

Signed-off-by: Bert Vermeulen <bert@biot.com>
2016-05-10 14:06:50 +02:00
Felix Fietkau
b01f296f4f ncurses: provide libncurses compatibility symlinks in libncursesw
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-10 14:06:50 +02:00
John Crispin
a4571b7631 ubox: make logging code honour the hostname properly
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-10 10:43:17 +02:00
blogic
cbdfae5c04 ubox: turn logd into a separate package
Currently system log is always included as a part of ubox.
Add logd as a seperate package and add it to default packages list.

Signed-off-by: Andrej Vlasic <andrej.vlasic@sartura.hr>

SVN-Revision: 49285
2016-05-10 10:43:12 +02:00
Felix Fietkau
dd16b7748d ncurses: install pkg-config files to fix util-linux build breakage
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-10 10:12:01 +02:00
Rafał Miłecki
df8ca9a5c4 mtd: add -c option for specifying amount of data to be used for checksum
So far fixtrx was calculating checksum over amount of data matching
partition erase size. It was mostly a workaround of checksum problem
after changing anything in initial TRX content (e.g. formatting JFFS2).
Its main purpose was to make bootloader accept modified TRX. This didn't
provide much protection of flash data against corruption.

This new option lets caller request calculating checksum over a bigger
amount of data. It may be used e.g. to include whole kernel data for
checksum and hopefully make bootloader go info failsafe mode if
something goes wrong.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-09 20:10:58 +02:00
Rafał Miłecki
2dd125048d mtd: trx: use separated buffer for TRX header
We plan to adjust usage of the main buffer to allow reading custom
amount of data for CRC32. This means we need another buffer that will be
always block aligned.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-09 20:10:58 +02:00
rmilecki
6de401b1f8 mtd: seama: exit with error if Seama header wasn't found
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-09 18:53:22 +02:00
rmilecki
06a3241c27 mtd: seama: fix image data handling
1) Put sanity checks in one place
2) Respect provided offset
3) Read only as much data as needed for MD5 calculation

Thanks to the last change this is a great speedup and memory saver. On
devices with NAND flash we were allocating & reading about 128 MiB while
something about 8 MiB is enough.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-09 18:53:18 +02:00
rmilecki
30edc32888 mtd: seama: move buf allocation to the MD5 function
This buf is only used in this function now, so lets move it there.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-09 18:53:14 +02:00
rmilecki
1d628f0cbe mtd: seama: update MD5 using header in the first block buffer
This will allow separating first block buffer from a buffer used for MD5
calculation.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-09 18:53:13 +02:00
rmilecki
bcccb03200 mtd: seama: add md5 to header struct
This allows us to drop some extra offset calculations and simplifies
code a bit.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-09 18:53:11 +02:00
rmilecki
8632d89fa0 mtd: check for Seama magic early when fixing MD5
This avoid long (and unneeded) process of reading all data in case of
running on MTD not containig Seama entity.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-09 18:53:09 +02:00
rmilecki
320641585b mtd: add missing breaks in a switch
On platforms supporting both: TRX and Seama calling "fixtrx" was
resulting in trying to fix Seama as well.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-09 18:53:06 +02:00
rmilecki
8a60a41951 mtd: use tabs for indents
This makes code style consistent across the whole file.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-09 18:53:02 +02:00
Felix Fietkau
5071fb27b9 ncurses: remove libncurses, provide it via libncursesw
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-09 14:49:33 +02:00
Felix Fietkau
5b64e3532a mt76: update to the latest version
Fixes a tx locking error and adds a pci id

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-05 19:43:23 +01:00
Felix Fietkau
6259583ef3 mt76: fix rebuild on CONFIG_PACKAGE_MAC80211_MESH changes
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-05-05 19:43:23 +01:00
Daniel Golle
9b9c78e071 base-files: evaluate uci-defaults on run-time installations
Packages may install scripts into /etc/uci-defaults to be executed once
after installation, usually at the first boot of the target. This works
fine if the package was installed to the rootfs during build or using
the ImageBuilder.
If the package is installed using opkg during run-time uci-defaults
were applied only after a reboot of the device. Avoid the need to
reboot by evaluting the package's uci-defaults in default-postinst.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2016-05-04 14:24:37 +01:00
Michal Hrusecky
f6adbdf3cd openssl: Update to version 1.0.2h
Bump to the latest version, fixes several security issues:
 * CVE-2016-2107, CVE-2016-2105, CVE-2016-2106, CVE-2016-2109, CVE-2016-2176
More details at https://www.openssl.org/news/openssl-1.0.2-notes.html

Signed-off-by: Michal Hrusecky <Michal.Hrusecky@nic.cz>
2016-05-04 13:00:31 +01:00
Jo-Philipp Wich
4076d863bd firewall3: fix mark rules for local traffic, fix race condition
Update to latest HEAD in order to fix MARK rule generation for local traffic,
also fix a possible race condition during firewall start.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-02 18:46:30 +01:00
Gergely Kiss
a2b555189b libiconv: add all ASCII aliases
This patch adds missing ASCII aliases to the libiconv stub in order to avoid conversion errors like https://github.com/openwrt/packages/issues/2373

Signed-off-by: Gergely Kiss <mail.gery@gmail.com>
2016-05-02 18:35:35 +01:00
Hans Dedecker
6a06cd8331 xtables-addons: Avoid redefinition of SHRT_MAX in lua packet script
Patch Lua packet script defines SHRT_MAX which is already defined in <linux/kernel.h> and
is included indirectly by lauxlib.h. Fix the redefintion as it leads to compile failure
on systems which treat macro redefinition as an error

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-05-02 18:28:01 +01:00
Jo-Philipp Wich
a6f76bffd8 signing: remove unatteded build key and use current keyring instead
Remove the public unatteded buildkey from the opkg package to avoid
having hardcoded keys in tree. Use the external keyring package instead
which can be easily updated by users.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-30 20:39:23 +02:00
John Crispin
33de8c77e2 fstools: fix snapshot support
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:46 +02:00
John Crispin
0fae7270cf fstools: update to latest git HEAD
fixes snapshot support

Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
John Crispin
4a8e960c62 base-files: fix group/user settings after sysupgrade
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
John Crispin
ed07ef1601 base-files: split user/group addition code into a function
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
John Crispin
c9e3cd798d fstools: update to latest git HEAD
this adds the remount command to the block tool

Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
John Crispin
d72e538e89 base-files: add new public key used by unattended builds
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
John Crispin
a13f47760c base-files: add a conditional dependency to lede-keyring
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
John Crispin
d2e4caf343 lede-keyring: add the developer public keyring
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-29 04:15:34 +02:00
Hans Dedecker
ec9f6fe04d ppp: Add ppp-mod-passwordfd subpackage to ppp
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-04-28 13:50:41 +02:00
Hans Dedecker
ce9e5e16ff dnsmasq: Add conntrack support in the full variant
Conntrack support reads the connection track mark associated with
incoming DNS queries and sets the same mark value on the upstream
forwarded DNS query. This can be usefull to track traffic generated
by dnsmasq to associate it with the clients who generate the queries,
usefull for bandwidth accouting and firewall.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-04-28 13:50:20 +02:00
Hans Dedecker
16122117a5 dropbear: Add procd interface triggers when interface config is specified
A dropbear instance having an interface config won't start if the interface is down as no
IP address is available.
Adding interface triggers for each configured interface executing the dropbear reload script
will start the dropbear instance when the interface is up.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-04-28 13:49:37 +02:00
Hans Dedecker
b3f6c4b3ac iproute2: Add package for nstat utility
Add support for the command line utility nstat displaying network statistics

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-04-28 13:49:17 +02:00
Hans Dedecker
7545c1d96b dropbear: Make utmp and putuline support configurable via seperate config options
Utmp support tracks who is currenlty logged in by logging info to the file /var/run/utmp (supported by busybox)
Putuline support will use the utmp structure to write to the utmp file

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-04-28 13:47:48 +02:00
Hans Dedecker
a83f049b5b netifd: Add configurable DHCP release behavior
Make sending a DHCP release configurable when the client exits allowing to clean up
IP/mac state info in intermediate devices.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-04-28 13:44:47 +02:00
Hans Dedecker
312cb987f9 xtables-addons: Fix Lua packet script implementation
lua_packet_segment parameter start has type char pointer; in function lua_tg
it's assigned an uint16 value generating compiler warnings obviously indicating
posssible seg fault problems. Fix the issue by using the correct skb functions
so the parameter points to the position inside the sk_buff

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Signed-off-by: Stijn Cleynhens <stijn.cleynhens@gmail.com>
2016-04-28 11:45:43 +02:00
Jo-Philipp Wich
07bdd30906 package: remove duplicate lines from otrx and nvram makefiles
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-26 23:28:17 +02:00
Jo-Philipp Wich
b04a25491f package: flag further target specific packages as nonshared
Add nonshared flag to package depending on specific targets or subtargets as
there's no guarantee otherwise that they'll be available in the shared repo.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-26 23:26:43 +02:00
Jo-Philipp Wich
69ccef03f9 package: mark nvram and otrx nonshared as they're target specific
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-26 23:09:12 +02:00
Álvaro Fernández Rojas
0ab31bfced brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-04-24 13:00:11 +02:00
Jo-Philipp Wich
4c60a6f803 opkg: fix use-after-free with duplicate packages on the command line
When the same package file is specified multiple times on the opkg install
command line, the name pointer on the argv array becomes stale after the
package structures have been merged, leading to invalid memory accesses
upon install.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-23 14:03:50 +02:00
Jo-Philipp Wich
9531e0fce5 package: fix toolchain ipk flags
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-22 12:20:47 +02:00
Jo-Philipp Wich
37de17c379 linux: kmod-e100: use preconverted firmware files
Instead of converting the firmware files ourselves, use the files
generated during the normal kernel build process. This fixes packaging
kmod-e100 in the SDK environment.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-21 16:39:59 +02:00
John Crispin
528ffec3cd base-files: remove ununsed login.sh
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-19 20:42:34 +02:00
John Crispin
b4e33a1c08 base-files: Allow to disable failsafe mode
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
2016-04-19 10:07:35 +02:00
John Crispin
dc92917409 image / basefiles: make console password configurable
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-18 21:53:07 +02:00
John Crispin
5e85ae9e4c base-files: fix error message during boot
preinit spews out this message

"cat: can't open '/proc/device-tree/model': No such file or directory"

Signed-off-by: John Crispin <john@phrozen.org>
2016-04-11 11:58:57 +02:00
Álvaro Fernández Rojas
9dee77795d brcm2708-gpu-fw: improve package version and release
Use git revision as package release and date for package version.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-04-16 11:27:56 +02:00
Álvaro Fernández Rojas
2cd1f5a0db brcmfmac43430-firmware: improve package version and release
Use git revision as package release and date for package version.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-04-16 11:25:56 +02:00
Jo-Philipp Wich
abc828b085 openssl: fix wrong build target strings
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-15 07:40:31 +02:00
Jo-Philipp Wich
addfc0efdd uclibc++: add hack to fix failing patch
One of the patched files, include/unwind-cxx.h, contains windows newlines
which lead to the following failure:

  Applying ./patches/006-eabi_fix.patch using plaintext:
  patching file include/typeinfo
  patching file include/unwind-cxx.h
  Hunk #1 FAILED at 173 (different line endings).
  Hunk #2 FAILED at 181 (different line endings).

Add a fixup command to the prepare phase which normalizes the line endings
before applying source patches.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-14 18:27:12 +02:00
Jo-Philipp Wich
9e04019024 package: flag essential components as nonshared
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-06 22:38:47 +02:00
Jo-Philipp Wich
32a0b8c104 include/version.mk: rework repository url handling
- Add %A placeholder for substituting the package architecture
- Change %U placeholder to refer to the toplevel repository URL
- Construct package feed URLs relative to the toplevel one to match new layout

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-13 00:31:15 +02:00
Jo-Philipp Wich
5170393f8c include: choose package output directory based on repository info
Use the new repository metadata field to choose the output directory of the
final package archives.

Non-sharable packages will be placed in the per-target package directory
while the rest will be placed in a per-repository sub directory within the
$OUTPUT_DIR/packages/$CPU_TYPE/ prefix.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-04-06 21:55:44 +02:00
Álvaro Fernández Rojas
59e0e88c22 brcm2708-gpu-fw: update to latest version
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-04-07 21:25:01 +02:00
Álvaro Fernández Rojas
f233664faa brcm2708-gpu-fw: update to latest version
This update also adds individual download of firmware files instead of fetching
every file on the repository (10-MiB vs 100+MiB).
Also copy Linux license from kernel directory instead of using the rpi-firmware
one.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-04-01 13:37:33 +02:00
Álvaro Fernández Rojas
8d5160bf5d brcmfmac43430-firmware: use @GITHUB download alias
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-04-03 22:05:55 +02:00
Jo-Philipp Wich
5a7c064bdb busybox: fix setting the kernel timezone
The settimeofday() syscall wrapper provided by musl filters out the timezone
argument, breaking the ability to set the kernel timezone through the function.

Adjust busybox patch to issue the syscall directly in order to circumvent the
problem.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-03-31 15:26:42 +02:00
Hans Dedecker
81a5f1ac9e netifd: Send DHCP release when client exits
Let DHCP client send a release when it exists so the DHCP server is
informed the IP address is released and allowing to clean up IP/mac
state info in intermediate devices.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2016-03-31 12:18:29 +02:00
Jo-Philipp Wich
3df4eaf22b uci: commit through symlinks
Update to latest HEAD in order to not clobber symlinks in /etc/config on
uci commit.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-03-31 02:09:53 +02:00
Jo-Philipp Wich
564330e013 netifd: fix default ip rules
Update to latest HEAD in order to remove the faulty "prelocal" ip rule leading
to unexpected policy rule precedence.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-03-31 00:05:02 +02:00
John Crispin
fa69553900 branding: add LEDE branding
Signed-off-by: John Crispin <blogic@openwrt.org>
2016-03-24 22:40:13 +01:00
John Crispin
be1985471e zynq: Add Zybo device support
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49257
2016-04-26 11:44:29 +00:00
John Crispin
869d3adc37 Zynq: Add Zedboard device support
Tested-by: Joe Zhang <jz21082@gmail.com>
Signed-off-by: Jason Wu <jason.wu.misc@gmail.com>

SVN-Revision: 49256
2016-04-26 11:44:26 +00:00
John Crispin
3481d0d793 dnsmasq: run as dedicated UID/GID
Running dnsmasq in a dedicated user/group allows matching its outgoing
traffic more easily using iptables' owner match.
Add UID/GID to the package metadata and append the user/group
parameters to the init script.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 49252
2016-04-26 11:44:10 +00:00
John Crispin
1a1bb3aaff mac80211: ath9k: add GPIO support for AR9280 chip
Enable access to GPIO on Atheros wireless chip AR9280.
Support for 9280 is added to existing 9285/9287 subsystem
because these 3 chips differ only in number of GPIO pins.

Signed-off-by: Michal Cieslakiewicz <michal.cieslakiewicz@wp.pl>

SVN-Revision: 49251
2016-04-26 11:44:07 +00:00
John Crispin
7a7e27c6d0 usbutils: Update USB IDs list and drop gzip compression
Change mirror to Github (Gentoo repo) and drop the gzip compression.
Worst case there's about 4kbyte increase in size but most images ends up
beign somewhere between 4-100kbyte smaller due to the lzma compression.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>

SVN-Revision: 49246
2016-04-26 11:43:49 +00:00
John Crispin
152da8b240 lantiq: uboot-envtools on BTHOMEHUBV3A
Generate fw_env.config for BTHOMEHUBV3A.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 49236
2016-04-26 11:43:11 +00:00
Jo-Philipp Wich
80c1cfeddc fstools: respect mount flags for /overlay mounts
Respect user configured mount flags such as "ro" or "sync" when processing
external overlay mount points.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>

SVN-Revision: 49223
2016-04-25 15:54:35 +00:00