Commit graph

38021 commits

Author SHA1 Message Date
Thibaut VARENE
890daca9e2 kernel: mtdsplit: Add support for Mikrotik NOR firmware
The RouterBOOT bootloader does not care where the kernel lives in the SPI
flash, all that matters is that the kernel is wrapped in the custom yaffs
container as generated by kernel2minor.

This container has a fixed signature as follows:
00000000  00 00 00 01 00 00 00 01  ff ff 6b 65 72 6e 65 6c  |..........kernel|

This patch adds mtdsplit support for identifying that signature and
triggering the search for the rootfs. rootfs is expected at EB boundary since
we use wget mtd_find_rootfs_from(). We make no use of the yaffs file size
field because it contains invalid data in the image generated by kernel2minor.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-02-22 22:52:19 +01:00
Kevin Darbyshire-Bryant
2c8cb0c572 dnsmasq: bump to dnsmasq v2.77test4
--bogus-priv now applies to IPv6 prefixes as specified in RFC6303 - this
is significantly friendlier to upstream servers.

CNAME fix in auth mode - A domain can only have a CNAME if it has no
other records

Drop 2 patches now included upstream.

Compile & run tested Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-02-22 22:38:12 +01:00
Jo-Philipp Wich
19720a6f03 opkg: fix handling conffiles in status lists
A missing list pointer initialization caused opkg to ignore conffile entries
from status files, breaking the conffile tracking on the target.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-22 13:48:16 +01:00
Stijn Tintel
5c49fecf72 Revert "kernel: ar8327/ar8337: disable ARL access code to avoid lockups (FS#384)"
This reverts commit ec1a695daa.

Revert the workaround, the problem was properly fixed in
2374549916.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-02-22 11:56:27 +01:00
Thomas Reifferscheid
e01b034cdc ipq806x: fix fakerootfs position
The fakeroot header is expected by the netgear bootloader in the last
64 bytes of the last block used by the uImage. With the current
linux-4.9 uImage being more than 128k smaller than the linux-4.4 uImage
the bootloader was unable to locate the rootfs ih_magic and was
refusing to load and start the kernel.

Fixes: FS#542

Signed-off-by: Thomas Reifferscheid <thomas@reifferscheid.org>
2017-02-21 21:18:33 +01:00
Felix Fietkau
0aa46bf76a build: skip opkg host dependency within the SDK
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-21 20:43:40 +01:00
Felix Fietkau
f66a0c93b3 archs38: only calculate entry point address when necessary
$(eval) runs even during prereq check, which can cause bogus error
messages

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-21 16:10:32 +01:00
Felix Fietkau
f77a1aac0b arc770: only calculate entry point address when necessary
$(eval) runs even during prereq check, which can cause bogus error
messages

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-21 16:10:30 +01:00
Felix Fietkau
2a1ee042cd ubox: update to the latest version
c553354 cmake: fix typo
8973576 kmodloader: fix not being able to find some modules
fce9382 cmake: Check for getrandom system call

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-21 16:09:32 +01:00
Alif M. Ahmad
2712497442 x86_64: Add support for EFI framebuffer (FS#515)
CONFIG_FB_EFI and CONFIG_FB_SIMPLE are needed to display console text on
EFI framebuffer.

CONFIG_FB_EFI is needed when the kernel is directly launched via EFI
shell or EFI startup.nsh script.

CONFIG_FB_SIMPLE is needed when launching the kernel via grub2 efi. In
this case, grub2 has prepared a gfxterm framebuffer and the kernel just
need to use the already prepared grub's gfxterm framebuffer to display
console text.

Signed-off-by: Alif M. Ahmad <alive4ever@live.com>
2017-02-21 16:07:09 +01:00
Felix Fietkau
709d10e220 px5g: replace px5g-standalone with a statically linked variant of px5g-mbedtls
px5g-standalone only supports SHA1 for certificates, which is strongly
deprecated. The new px5g-standalone is about 27k bigger (compressed),
and has identical behavior to px5g-mbedtls (it uses SHA256).

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-21 16:05:42 +01:00
Felix Fietkau
7df0069bb5 mbedtls: add --function-sections and --data-sections to CFLAGS
This allows binaries that links these libraries statically to be reduced
by using --gc-sections on link

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-21 16:05:03 +01:00
Felix Fietkau
adeae0e02a build: move opkg host dependency from package/install to package/compile
Improves parallel build behavior, since it allows opkg to be built at
the same time as other packages

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-21 13:03:20 +01:00
Felix Fietkau
294e908a2c cmake: skip build system check on compile
cmake checks the build system and its variables on its own to detect if
the makefiles need to be regenerated.
Unfortunately this can invalidate overrides passed in the
Build/Configure step. On non-Linux systems this breaks the build when
switching between targets of the same package architecture.

Fix this by forcibly disabling the build system check and relying on the
LEDE build system to take care of these things

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-21 13:03:20 +01:00
Felix Fietkau
e313a33024 build: allow building an individual subdir without dependencies using NO_DEPS=1
QUILT=1 had the same effect, but it is sometimes useful to be able to do
this without quilt

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-21 13:03:20 +01:00
Michal Sojka
b1f102b03e scripts/feeds: Reuse TOPDIR if defined in environment
The feeds script sets value of TOPDIR in a way that is inconsistent
with how toplevel Makefile sets it. The inconsistency manifests when I
use a "build directory" with symlinks to LEDE source (see below).

When make is invoked in such a directory, make's TOPDIR variable is
set to that directory, whereas scripts/feeds sets TOPDIR to the top of
LEDE source, which results in creating feeds directory inside the LEDE
source instead of in the build directory.

This patch changes the script so that it reuses the TOPDIR value form
the environment if it exists. The result is that 'make
package/symlinks' correctly fetches feeds to the build directory
instead in the source.

I use the following commands to create the build directory:

    ln -s $SRC/config config
    ln -s $SRC/Config.in Config.in
    ln -s $SRC/feeds.conf.default feeds.conf.default
    ln -s $SRC/include include
    ln -s $SRC/Makefile Makefile
    mkdir package
    ln -s $SRC/package/base-files package/base-files
    ln -s $SRC/package/boot package/boot
    ln -s $SRC/package/devel package/devel
    ln -s $SRC/package/firmware package/firmware
    ln -s $SRC/package/kernel package/kernel
    ln -s $SRC/package/libs package/libs
    ln -s $SRC/package/Makefile package/Makefile
    ln -s $SRC/package/network package/network
    ln -s $SRC/package/system package/system
    ln -s $SRC/package/utils package/utils
    ln -s $SRC/rules.mk rules.mk
    ln -s $SRC/scripts scripts
    ln -s $SRC/target target
    ln -s $SRC/toolchain toolchain
    ln -s $SRC/tools tools

This allows me to easily test changes in LEDE on multiple targets.

Signed-off-by: Michal Sojka <sojkam1@fel.cvut.cz>
2017-02-21 13:03:20 +01:00
Jo-Philipp Wich
55ffc38004 opkg: re-enable usign support
The switch to cmake caused the -DHAVE_USIGN flag to get lost, disabling
compilation of the correspondinf support code.

Update to latest Git head which enables usign support by default.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-20 15:32:58 +01:00
Stijn Tintel
ca8aee0c57 Revert "px5g-standalone: provide px5g via PROVIDES"
This reverts commit cc66f819b4.

This commit causes opkg to install px5g-standalone instead of px5g when
installing luci-ssl. As luci-ssl depends on mbedtls, using
px5g-standalone makes no sense. Next to that, it creates deprecated SHA1
certificates. Revert the commit to avoid pxg5-standalone to be
installed by accident.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-02-20 15:16:28 +01:00
Felix Fietkau
315498c163 libubox: fix host build on macOS
Use the defaults instead of a custom non-portable Host/Install section

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-20 14:57:20 +01:00
Rafał Miłecki
75b530a51b bcm53xx: add kernel 4.9 config
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
2017-02-20 14:12:30 +01:00
Jo-Philipp Wich
aff2d5c856 hostapd: fix feature indication
- Fix eap test to work with standalone hostapd builds
 - Fix 11n test to check the correct define
 - Add 11ac, 11r and 11w tests

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-20 12:06:18 +01:00
Kevin Darbyshire-Bryant
0247314f7d dnsmasq: bump to dnsmasq v2.77test3
New test release (since test1) includes 2 LEDE patches that are
upstream and may be dropped, along with many spelling fixes.

Add forthcoming 2017 root zone trust anchor to trust-anchors.conf.

Backport 2 patches that just missed test3:

Reduce logspam of those domains handled locally 'local addresses only'
Implement RFC-6842 (Client-ids in DHCP replies)

Compile & run tested Archer C7 v2

Signed-off-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2017-02-20 10:21:42 +01:00
Weijie Gao
3ee793f601 ar71xx: fix vlan settings for some boards
For AR71XX devices, GMAC1 always connects port 0 of the built-in switch,
as the CPU port.

This patch sets correct vlan for some devices with wrong settings:
a) mark port 0 as CPU port, tagged
b) reverse port order, marking these ports untagged

Signed-off-by: Weijie Gao <hackpascal@gmail.com>
2017-02-20 09:27:43 +01:00
Thibaut VARENE
6e4549138d ar71xx: Add more boards to the routerboard serial detection patch
This patch enables serial console on the 435 series and the 953gs.

Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
2017-02-20 09:20:48 +01:00
Hsing-Wang Liao
2cfc40a8ad kernel: add Chinese codepages
Signed-off-by: Hsing-Wang Liao <kuoruan@gmail.com>
2017-02-20 09:13:52 +01:00
Alexandru Gagniuc
a4def18f29 uboot-omap: Update to u-boot v2017.01
Specifying USE_PRIVATE_LIBGCC is no longer needed, as it is the
default.

Patch 001 is removed, since it was already merged upstream. Patches
100 and 101 are removed because they do not appear to be needed
anymore, and they do not conform with the sign-off and commit message
procedures.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-02-20 09:12:04 +01:00
Alexandru Gagniuc
b132d4fb91 uboot-omap: Do not hide bootloader packages
Because they were hidden, there was no way to disable the uboot
targets in menuconfig, so they had to be built every time. The omap
target is the only one to hide uboot packages. To be consistent with
the other targets, and have more control over the build, un-hide the
u-boot packages.

Note that the default behavior remains unchanged, as uboot will be
built unless explicitly disabled.

Signed-off-by: Alexandru Gagniuc <alex.g@adaptrum.com>
2017-02-20 09:12:04 +01:00
Thomas Roberts
f9278337cf ar71xx: add support for TL-WR802N Version 2
This patch adds support for the TP-Link TL-WR802N Version 2.

Specification:
- SoC: Qualcomm Atheros QCA9533 (560 MHz, MIPS 24Kc)
- RAM: 32 MiB
- Storage: 4 MiB of FLash on board
- Wireless: Built into QCA9533 (Honey Bee), PHY modes b/g/n
- Ethernet: 1x100M (port0)

Installation through OEM Web Interface:
- Connect to TL-WR802N by Ethernet or Wi-Fi
- Go to http://192.168.0.1 (default user is "admin" & password is "admin)
- Go to "System Tools -> Firmware Upgrade"
- Browse for firmware "*.factory-us.bin" or  "*.factory-eu.bin" for eu model
- Click upgrade

Installation through tftp:
Note: T_OUT, T_IN and GND on the board must be connected to USB TTL
      Serial Configuration 115200 8n1

- Boot the TL-WR802N
- When "Autobooting in 1 seconds" appears type "tpl" followed by enter
- Connect to the board Ethernet port
    (IPADDR: 192.168.1.1, ServerIP: 192.168.1.10)
- tftpboot 0x80000000 <Firmware Image Name>
- Record the result of "printenv bootcmd"
- Enter "erase <Result of 'printenv bootcmd'> +0x3c0000"
    (e.g erase 0x9f020000 +0x3c0000)
- Enter "cp.b 0x80000000 <Result of 'printenv bootcmd'> 0x3c0000"
    (e.g cp.b 0x80000000 0x9f020000 0x3c0000)
- Enter "bootm <Result of 'printenv bootcmd'>"
    (e.g bootm 0x9f020000)

Signed-off-by: Thomas Roberts <tom.p.roberts@gmail.com>
2017-02-20 09:10:17 +01:00
Jo-Philipp Wich
7c9f5c7e6b sdk: emit proper tag references for base URLs
Properly resolve symbolic tag names when constructing the base feed Git url
and avoid emitting "HEAD" references when building from detached commits.

Fixes #495, #501.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-19 20:47:49 +01:00
Jo-Philipp Wich
b65dc04712 opkg: switch to own fork to improve memory usage
Switch to our own fork of opkg to significantly reduce the required amount
of memory when updating lists or installing packages.

Preliminary tests showed a usage drop of about 90% during these operations,
from ~3.7MB with unmodified opkg to ~360KB with our custom fork.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-19 19:08:46 +01:00
Jo-Philipp Wich
84ceca5148 libubox: add host build
Our opkg fork requires libubox to build, so add a host build for it.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-19 19:08:46 +01:00
Jo-Philipp Wich
08f9eb7954 firewall3: update to Git head to support xtables API level > 11
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2017-02-19 19:08:46 +01:00
Felix Fietkau
663f2a0864 gen-dependencies.sh: fix handling variations in "file" output
On some systems, file adds ", with debug info" after "not stripped"

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-19 16:56:18 +01:00
Felix Fietkau
b9b681c067 rstrip.sh: fix handling variations in "file" output
On some systems, file adds ", with debug info" after "not stripped"

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-19 16:56:17 +01:00
Mathias Kresin
bececcce86 lantiq: fix warning if ltq_atm modules are missing
Fixes the following warning on first boot if the ltq_atm modules are
not included in the image:

  ls: /lib/modules/4.4.49/ltq_atm*: No such file or directory

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-18 16:51:31 +01:00
Mathias Kresin
e88b36f4be lantiq: set the internet led interface according to wan interface
Use the nas0 interface for the netdev trigger as default. Use the ptm0
interface for xRX200 boards to match the default wan interface set in
02_network.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-18 16:51:31 +01:00
Mathias Kresin
044a4eafd5 lantiq: introduce lantiq_is_vdsl_system
Move the code to check if the current system is a system with vdsl
support to a dedicate function to make it reusable.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-18 16:51:31 +01:00
Mathias Kresin
cfd16ecc48 lantiq: fix ARV7519RW22 switch port indexing
Fixes FS#454.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-02-18 16:51:31 +01:00
Hans Dedecker
157b78779f odhcp6c: fix PKG_MIRROR_HASH
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
2017-02-17 16:04:28 +01:00
Felix Fietkau
7df998bb6d uhttpd: use sha256 when generating certificates with openssl (FS#512)
Patch from attachment to FS#512

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-17 14:42:13 +01:00
Felix Fietkau
6c44ac286b libpcap: remove feature dependencies on kmod-* packages
USB support could be built into the kernel as well

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-17 14:09:21 +01:00
Stijn Tintel
27040dbf89 dropbear: bump PKG_RELEASE
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-02-17 12:18:58 +01:00
Felix Fietkau
72327d1757 ar71xx: fix ethernet PLL configuration for QCA956x
QCA956x is configured like AR934x, not like the older chips.
Should fix ethernet hangs when using the WAN port without SGMII

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-17 12:16:13 +01:00
Henryk Heisig
d6baeb5c48 ar71xx: fix lan ports on archer C59 and C60
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2017-02-17 10:30:48 +01:00
David Woodhouse
ab20c638b6 x86: Set default baud rate on Geode images to 115200
Prior to commit 1496b95a0 ("x86: clean up default grub baudrate
settings") we had three different baud rates for the Geode targets:
19200 for net5501, 38400 for alix2, and 115200 for Geos.

It doesn't seem that there's a very good reason for varying from our
default 115200 baud, so let's make the Geode target do that instead.

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2017-02-17 10:30:38 +01:00
David Woodhouse
d16f433e42 x86: Add Geos profile for Geode subtarget
This makes the Geode images actually useful again. The Geos profile
should include the relevant hardware for that board, and the Default
profile adds the via-rhine adapter which seems to have been present in
the net5501 and alix targets killed in commit 9e0759ea26 ("x86: merge
all geode based subtargets into one").

Signed-off-by: David Woodhouse <dwmw2@infradead.org>
2017-02-17 10:30:38 +01:00
Karol Dudek
58fc50f1b0 ar71xx: add support for 8devices Lima board
Lima is a module for the (IoE) internet of everything applications,
based on Qualcomm/Atheros QCA4531.

Specification:

- 650/600/216 MHz (CPU/DDR/AHB)
- 64 MB of RAM (DDR2)
- 32 MB of FLASH
- 2T2R 2.4 GHz
- 2x 10/100 Mbps Ethernet
- USB 2.0 Host
- PCIe
- UART for serial console
- 14x GPIO

Flash instruction:
1. Download lede-ar71xx-generic-lima-squashfs-sysupgrade.bin
and rename it to 8dev_recovery.bin
2. Binary file copy to USB stick and plug into slot USB
3. Press S2 (reset) button
4. Press and hold the S1 button by 5 seconds
5. Wait ~40 seconds to complete recovery

Tested on:

- Lima development kit

Signed-off-by: Karol Dudek <karoiz@sli.pl>
2017-02-17 10:19:09 +01:00
John Crispin
a4efc9965c mediatek: add more missing symbols
Signed-off-by: John Crispin <john@phrozen.org>
2017-02-16 20:25:47 +01:00
John Crispin
bb255f7429 ipq806x: add v4.9 support
Signed-off-by: John Crispin <john@phrozen.org>
2017-02-16 20:25:32 +01:00
John Crispin
04c4b6f7fd mediatek: add config file for v4.9
Signed-off-by: John Crispin <john@phrozen.org>
2017-02-16 14:14:29 +01:00