Commit graph

12748 commits

Author SHA1 Message Date
Hauke Mehrtens
e770d60e47 kernel: kernel 3.18 fix compilation on mips
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43130
2014-10-31 21:54:16 +00:00
Felix Fietkau
0b1c89f6fe target/imagebuilder: remove obsolete !TARGET_ROOTFS_INITRAMFS dependency
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43128
2014-10-31 12:59:23 +00:00
Zoltan Herpai
d7e981ca4c kernel: add missing symbols for 3.18
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>

SVN-Revision: 43121
2014-10-30 10:15:20 +00:00
John Crispin
2f30ba5328 ralink: make sure a mii_bus is loaded before accesing its state
this caused a crash on boot

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43120
2014-10-30 10:10:57 +00:00
John Crispin
0b64dca49d ralink: load mt7530 driver on the 3 buffalo units
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43119
2014-10-30 10:10:51 +00:00
John Crispin
0b19244498 ralink: mt7530 - force wan port up
some bootloaders (linksys e1700) set wonky hw trap values. reset this upon boot to make all ports work.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43117
2014-10-30 08:44:00 +00:00
John Crispin
c466262d53 vgv7519: fix profile, this board have a rt2800-pci board
SVN-Revision: 43115
2014-10-30 08:08:09 +00:00
John Crispin
38692d14f2 ralink: fix mt7530 for newer silicon revisions
latest mt7530 silicon seems to have a different phy id.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43113
2014-10-30 08:07:49 +00:00
John Crispin
ca28f9c515 mac80211: configuration: Better handling of LIB80211 configuration
OpenWRT patch 255-lib80211_kconfig_hacks gives user possiblity to select
LIB80211 dependant settings (LIB80211_CRYPT_*) without having LIB80211
selected which is wrong.
My patch changes OpenWRT patch so LIB80211 is vissible and all
LIB80211_CRYPT_* options selects LIB80211 automatically.

Signed-off-by: Tomasz Wasiak <tjwasiak@gmail.com>

SVN-Revision: 43112
2014-10-29 21:04:30 +00:00
John Crispin
36e862da17 lantiq: vgv7519: fix board_config on dts, read mac address and set
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43109
2014-10-29 20:50:40 +00:00
John Crispin
152d692a1f ramips: improve ralink ethernet driver
Change list:
* add tx scatter gather function.
* add software rx vlan offload to let GRO work.
* add jumbo frame support. because use build_skb so max MTU is 3812.
* enable hardware tx vlan.
* enable GRO and remove LRO. because it can improve performance and can work on forwarding.
* enable/fix tx padding function.
* let napi handle tx clean up.
* support ethtool operation. now support message level, hardware status and coalesce.
* ethtool support use mdio to get phy status only on mt7620. need modify dts file and add phy info to support it.

Notes:
* build and test on rt2880, rt3052, rt3352, rt3662, rt5350 and mt7620a.
* TCP NAT performance improve. test with netperf.
  - rt2880(gigabit) from 5x to 12x Mbps.
  - rt3x5x from 6x to 94 Mbps.
  - rt5250 from 5x to 8x Mbps.
  - rt3662(gigabit) from 6x to 42x Mbps with GRO. 23x Mbps without GRO. 66x Mbps with jumbo frame.
  - mt7620 still 94Mbps.
* TSO function not tested. because i don't have mt7620 with eco >= 5. and the hardware don't support to set MSS. it will have problem.

Signed-off-by: michael lee <igvtee@gmail.com>

SVN-Revision: 43108
2014-10-29 19:43:59 +00:00
John Crispin
62107ff367 swconfig: last vs tail
sorry .....

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43107
2014-10-29 19:24:16 +00:00
John Crispin
ab5d70e046 swconfig: "swconfig list" shows devices in reverse order
Boards that have more than one swconfig enabled switch will show the devices in
reverse order when call swconfig list. Fix this by using list_add_tail().

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43106
2014-10-29 18:51:06 +00:00
John Crispin
c0bf47232a ralink: fix switch config on mt7530 evb
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43105
2014-10-29 18:51:02 +00:00
John Crispin
8223e78121 ralink: fix a off by 4 bug in mt7530
0x8100000c vs 0x810000c0 int he pvc register this caused the cascade with an external mt7530 to fail.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43104
2014-10-29 18:49:46 +00:00
John Crispin
d0bf15f235 ramips: add support for A5-V11 board (resubmit)
(Reposted due to an issue with the patchwork server during original submission)

Unbranded. Silkscreen on PCB is “A5-V11”, believed to be made by Bococom (or at least uses Bococom image encryption - as used on poray devices - but different key)

Signed-off-by: Gareth Bryan <gareth@mx9.org>

SVN-Revision: 43102
2014-10-29 11:01:17 +00:00
John Crispin
9762c54914 lantiq_dsl.sh: properly detect vdsl_cpe_control and add missing quotes
lantiq_dsl.sh didn't work with VDSL chipsets for now, fix that by
detecting whether vdsl_cpe_control or dsl_cpe_control should be used.
Also add missing quotes around shell string comparision.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 43101
2014-10-29 08:23:47 +00:00
Rafał Miłecki
0100a8a68e brcm47xx: initial support for kernel 3.18
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43100
2014-10-28 10:26:00 +00:00
Hauke Mehrtens
fb543b63a9 kernel: add closing " to REGMAP_I2C's tristate
Thanks swalker for reporting.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43099
2014-10-27 23:14:21 +00:00
Hauke Mehrtens
f12c4b0815 bcm53xx: remove support for fpu
This SoC does not have a vfpv3 FPU.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43098
2014-10-27 23:04:07 +00:00
Hauke Mehrtens
7fc9bb1aca bcm53xx: initial support for kernel 3.18
This adds initial support for kernel 3.18.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43097
2014-10-27 23:02:08 +00:00
Hauke Mehrtens
d8d692342f kernel: add generic config for kernel 3.18
There are still many options missing.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43096
2014-10-27 22:58:12 +00:00
Hauke Mehrtens
a76ee3b1d5 kernel: make the kernel 3.18 patches apply and boot on arm.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 43095
2014-10-27 22:55:39 +00:00
Rafał Miłecki
1513b39a8c kernel: start working on 3.18 support
This commit:
1) Copies 3.14 patches
2) Drops mainlined stuff
3) Modifies some patches to apply

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43093
2014-10-27 18:14:39 +00:00
Rafał Miłecki
e168852ed9 kernel: 3.14: use patch that is really upstreamed for hso 0af0:9200
Patch 060 we had in repo was never sent/accepted.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43091
2014-10-27 16:00:36 +00:00
John Crispin
c997410461 mpc85xx: fix WAN/LAN-MAC for TP-LINK TL-WDR4900 v1
This works around a bootloader issue where every device
has the same lan/wan-mac 00:04:9f:ef:01:01 - with this patch
we read the macs from config-partition during initial network
setup. We have 9 valid macs stored in the partition, the
1st two are used for the radios, 3 and 4 are now used for WAN/LAN.

on an already setup / running device we can get the real macs with
. /lib/functions.sh
. /lib/functions/system.sh
echo "LAN = $(mtd_get_mac_binary config 338)"
echo "WAN = $(mtd_get_mac_binary config 344)"

see:
https://dev.openwrt.org/ticket/14714

from the ticket / user klondike:
U-Boot passed this commit ecd1a09b81
http://u-boot.10912.n7.nabble.com/U-Boot-PATCH-mpc83xx-remove-hardcoded-network-addresses-from-config-files-td44372.html
I suppose to prevent this particular issue, but the WDR4900 may be using an old bootloader still affected.
                                                                   ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^

I have been checking the contents of the dtb on the flash, this particular bit is quite revealing:

ethernet@b0000 {
                        #address-cells = <0x1>;
                        #size-cells = <0x1>;
                        device_type = "network";
                        model = "eTSEC";
                        compatible = "fsl,etsec2";
                        fsl,num_rx_queues = <0x8>;
                        fsl,num_tx_queues = <0x8>;
                        local-mac-address = [00 00 00 00 00 00];
                                             ^^^^^^^^^^^^^^^^^

                        interrupt-parent = <0x2>;
                        phy-handle = <0x3>;
                        phy-connection-type = "rgmii-id";
                        ptimer-handle = <0x4>;

                        queue-group@0 {
                                #address-cells = <0x1>;
                                #size-cells = <0x1>;
                                reg = <0xb0000 0x1000>;
                                rx-bit-map = <0xff>;
                                tx-bit-map = <0xff>;
                                interrupts = <0x1d 0x2 0x1e 0x2 0x22 0x2>;
                        };
                };

I also have been checking the live device map to find this:

root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b0000/local-mac-address
00000000  00 04 9f ef 01 01                                 |......|
00000006
root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b1000/local-mac-address
*
root@GHS-AP3:~# hexdump -C /proc/device-tree/soc@ffe00000/ethernet@b2000/local-mac-address
*

My conclussion is that U-Boot most likely finds the device and (as no valid MAC-address is provided)
falls back to the default MAC provided by the old code, the kernel then receives thee modified
device map from U-Boot and assumes this is the correct MAC for the device despite it obviously isn't.

This can be seen at
target/linux/mpc85xx/patches-3.10/140-powerpc-85xx-tl-wdr4900-v1-support.patch

The enetaddr is filled up by using the device tree data by the process_boot_dtb
function and used by the platform_fixups function to set the eth0 address
(by calling dt_fixup_mac_address_by_alias("ethernet0", enetaddr); ).
But instead we should be used the device address which to my understanding is
provided in the mtd.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43074
2014-10-26 17:58:53 +00:00
John Crispin
d1a1ad3e66 ramips: fix filenames in PorayDualSize factory images
SVN-Revision: 43073
2014-10-26 17:18:45 +00:00
John Crispin
4d7ae64b73 vgv7519: support more recent board release with vrx288 v1.2
The existance of this new board has been confirmed and tested by the guy on this commit

76fdd8e638

SVN-Revision: 43072
2014-10-26 17:18:41 +00:00
Felix Fietkau
2eb6b059ba ar71xx: refresh 3.10 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43051
2014-10-24 20:39:42 +00:00
Felix Fietkau
7004b79665 kernel: refresh generic 3.10 patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43050
2014-10-24 20:39:36 +00:00
Felix Fietkau
0aca075a97 kernel: update 3.10.49 to 3.10.58 (released 2014-oct-15)
All platforms which are using 3.10.x at the moment are upgraded.

Changelogs:
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.50
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.51
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.52
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.53
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.54
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.55
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.56
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.57
https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.10.58

A new symbol 'X86_16BIT' appeared in 3.10.52 with commit 34273f41d57ee8d854dcd2a1d754cbb546cb548f
("x86-espfix-make-it-possible-to-disable-16-bit-support.patch")
I defaults to 'unset', but it's worth a discussion to enable it
("turn off support for any 16-bit software").

Also removed the patch 0db3db45f5bd6df4bdc03bbd5dec672e16164c4e
("fix build failure on memcpy() in decompress.c")
and is obsolete by commit 29593fd5a8149462ed6fad0d522234facdaee6c8 upstream.
included in kernel 3.10.56

compile tested on all platforms with:
make tools/install
make toolchain/install
make target/linux/compile

user@box:~/user/openwrt$ cat /tmp/log.txt
[Wed Oct 22 00:36:02 CEST 2014] ./smoketest.sh: ar71xx - OK
[Wed Oct 22 00:53:22 CEST 2014] ./smoketest.sh: ar7 - OK
[Wed Oct 22 01:08:27 CEST 2014] ./smoketest.sh: au1000 - OK
[Wed Oct 22 01:21:43 CEST 2014] ./smoketest.sh: avr32 - OK
[Wed Oct 22 01:37:47 CEST 2014] ./smoketest.sh: cns21xx - OK
[Wed Oct 22 01:52:05 CEST 2014] ./smoketest.sh: cns3xxx - OK
[Wed Oct 22 02:10:23 CEST 2014] ./smoketest.sh: gemini - OK
[Wed Oct 22 02:29:07 CEST 2014] ./smoketest.sh: ixp4xx - OK
[Wed Oct 22 02:44:01 CEST 2014] ./smoketest.sh: malta - OK
[Wed Oct 22 02:55:57 CEST 2014] ./smoketest.sh: mpc85xx - OK
[Wed Oct 22 03:07:56 CEST 2014] ./smoketest.sh: orion - OK
[Wed Oct 22 03:24:30 CEST 2014] ./smoketest.sh: ppc40x - OK
[Wed Oct 22 03:40:19 CEST 2014] ./smoketest.sh: ppc44x - OK
[Wed Oct 22 03:55:29 CEST 2014] ./smoketest.sh: realview - OK
[Wed Oct 22 04:09:47 CEST 2014] ./smoketest.sh: sparc - OK
[Wed Oct 22 04:23:37 CEST 2014] ./smoketest.sh: x86 - OK
[Wed Oct 22 04:35:56 CEST 2014] ./smoketest.sh: xburst - OK

run tested on x86, au1000, ar71xx, mpc85xx and brcm47xx

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43049
2014-10-24 20:39:26 +00:00
Felix Fietkau
4c1a0a5f34 netlogic: use KERNEL_PATCHVER
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43048
2014-10-24 19:35:52 +00:00
Felix Fietkau
c288d2d6d9 kernel: makefiles: make use of new var KERNEL_PATCHVER
replace all occurences of LINUX_VERSION with the cleaner
approach. future kernel upgrades must mostly touch only
one file. the only platform left is netlogic, because it
uses a intermediate kernel 3.14.16

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 43047
2014-10-24 19:34:02 +00:00
Florian Fainelli
8e776bf5ae netlogic: fix modular USB build
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43039
2014-10-24 00:16:48 +00:00
Florian Fainelli
7166fbbb67 netlogic: add basic user-space support
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43038
2014-10-24 00:16:37 +00:00
Florian Fainelli
c6285fd82f netlogic: add XLR/XLP support
Add support for Broadcom/Netlogic XLR/XLP support

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43037
2014-10-24 00:16:23 +00:00
Florian Fainelli
2c62ad1fda kernel: add a memmove() implementation for MIPS boot decompressor
This is required due to 306-mips_mem_functions_performance.patch, just
add a memmove() implementation to satisfy the lzma2 decompressor code.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 43036
2014-10-24 00:16:10 +00:00
Rafał Miłecki
c14e0807bd bcm53xx: backport forgotten spi-nor change
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43031
2014-10-22 14:34:43 +00:00
Rafał Miłecki
2466b04a5a bcm53xx: backport spi-nor patches from 3.18-rc1
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43030
2014-10-22 14:16:18 +00:00
Felix Fietkau
a1837135e0 ar71xx: add support for buffalo WZR-450HP2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43026
2014-10-22 11:02:18 +00:00
Rafał Miłecki
bf0342f0ef bcm53xx: add support for Asus RT-N18U LEDs & buttons
Got GPIOs from #18152 thanks to Grrruk

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43010
2014-10-21 14:37:44 +00:00
Rafał Miłecki
4669d08e83 bcm53xx: switch RT-N18U firmware to the UBI
According to the ticket #18152 it also uses NAND with 0x20000 erase size
and 0x800 page size.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43008
2014-10-20 22:09:40 +00:00
John Crispin
32acfefb6a ar71xx: unify usage of IMAGE_PROFILE instead of PROFILE.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42992
2014-10-20 06:29:58 +00:00
John Crispin
5c33e9565b ramips: add comments for image/Makefile.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42991
2014-10-20 06:29:51 +00:00
John Crispin
182d63bc40 ar71xx: add comments for Image/BuildLoader{, Alone}.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42990
2014-10-20 06:29:44 +00:00
John Crispin
6e1637f8fa firmware-utils: restore compilation of mkhilinkfw.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42989
2014-10-20 06:29:38 +00:00
John Crispin
24d886c472 kernel: add another missing symbol for 3.14
SENSORS_VEXPRESS is masked by HWMON

Signed-off-by: Daniel Golle <daniel@makrotopia.org>

SVN-Revision: 42984
2014-10-20 06:28:57 +00:00
John Crispin
7bac455a4c ramips: add support for Nexx WT3020 devices
SVN-Revision: 42983
2014-10-20 06:28:48 +00:00
John Crispin
5b40a150ea ramips: sort boards in upgrade/platform.sh alphabetically
SVN-Revision: 42982
2014-10-20 06:28:39 +00:00
Jo-Philipp Wich
05abf01ac0 x86_64: fix invoking sysupgrade on PARTUUID mounted system
Fix sysupgrade to determine the correct boot block device to use if
/proc/cmdline contains a PARTUUID root.

Change the preinit move_config() hook to use the UUID scanning code
from sysupgrade in order to avoid code duplication.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 42968
2014-10-19 20:28:43 +00:00