Commit graph

28393 commits

Author SHA1 Message Date
John Crispin
ca737049d2 ralink: fix mt7620 ohci 3.10
the ohci phy was not reset properly

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42290
2014-08-25 16:31:01 +00:00
John Crispin
3d00a1109e ralink: mt7620 has obchi/ehci and not dwc2
fix the default package selection

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42289
2014-08-25 16:30:57 +00:00
John Crispin
1abdfe18ef kernel: add ohci-platform.ko for 3.11+
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42288
2014-08-25 16:30:52 +00:00
John Crispin
c9813699b6 kernel: add own Kconfig for OpenWrt mtdsplit drivers
There are pretty many OpenWrt patches against mtd subsystem resulting
in a bit of mess and growing maintenance cost.
My idea is to use an extra "mtdsplit" directory with OpenWrt specific
files (including Kconfig).
This is the first step to achieve this. This patch adds a "mtdsplit"
directory with Kconfig and replaces 4 patches with a single one.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42287
2014-08-25 16:30:44 +00:00
Jo-Philipp Wich
730589281e uhttpd: do not configure TLS parameters if libustream-ssl is not present
A quite frequent problem after sysupgrading from an older, SSL enabled build
is that ustream-ssl is not installed so uhttpd fails to come up again due to
https listening directives in the preserved configuration.

Skip key/cert and ssl listen options when libustream-ssl.so is not present.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 42284
2014-08-25 12:39:34 +00:00
John Crispin
7a1f4c50fa PKG_CHECK_FORMAT_SECURITY: add a menuconfig option, disable by default
The idea is still to enable it by default at some point
I've tested all ar71xx packages (except oldpackages) using CONFIG_ALL=y
Failing packages have been marked with PKG_CHECK_FORMAT_SECURITY:=0 for now
I can test more targets but i have no idea which are the most used

Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>

SVN-Revision: 42282
2014-08-25 06:36:06 +00:00
John Crispin
bbcf1fa610 mac80211/rt2x00: allow disabling bands through dts
Add dts property ralink,2ghz and ralink,5ghz
e.g. disable 2ghz band:
wmac@10180000 {
  status = "okay";
  ralink,2ghz = <0>;
}

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 42281
2014-08-25 06:36:01 +00:00
John Crispin
67cf439237 ar71xx: use ETH_ALEN for consistency
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42280
2014-08-25 06:35:58 +00:00
John Crispin
79c04e1897 ar71xx: enable sysupgrade for the EnGenius ESR900
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42279
2014-08-25 06:35:54 +00:00
John Crispin
2ae05c57f8 package/*: remove useless explicit set of function returncode
somebody started to set a function returncode in the validation
stuff and everybody copies it, e.g.

myfunction()
{
	fire_command

	return $?
}

a function automatically returns with the last returncode,
so we can safely remove the command 'return $?'. reference:

http://tldp.org/LDP/abs/html/exit-status.html
"The last command executed in the function or script determines the exit status."

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42278
2014-08-25 06:35:50 +00:00
John Crispin
fdc41e2fd7 ramips: enable second SPI for VoCore
This patch enables the second SPI as spidev and also fixes some typos.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42277
2014-08-25 06:35:46 +00:00
John Crispin
a3fd3dc796 ramips: second spi device on rt5350
This is based on Jon Smirl's patch with the following changes:
- Set CS polarity as low by default.
- Add support for changing CS polarity.
- Add support for changing LSB/MSB.
- Add support for changing SPI mode.
- Fix indentations.

I tested it on a VoCore. Works fine connected to a second flash, but fails to detect MMC/SD cards due to SPI clock speed.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42276
2014-08-25 06:35:42 +00:00
Steven Barth
75cbca0a40 odhcp6c: enable softwires support by default
SVN-Revision: 42274
2014-08-25 06:11:53 +00:00
Jo-Philipp Wich
9d2bdd8585 iwinfo: properly decode SSIDs when scanning through wpa_supplicant
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 42273
2014-08-24 21:42:26 +00:00
Hauke Mehrtens
823659f458 bcm53xx: update bcma device tree intergeneration and fix nvram parsing
This fixes lots of sparse and checkpatch errors and extends the
documentation.

This also fixes a problem in the nvram parser, it now detects the
correct nvram on my Netgear R6250.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42272
2014-08-24 15:57:49 +00:00
Steven Barth
befad7432b odhcpd: fix static lease behavior with dhcpv4
SVN-Revision: 42270
2014-08-24 08:12:57 +00:00
Florian Fainelli
fcfd0cec76 kernel: remove obsolete 322-ppc4xx-crypto-compile-fix.patch patches
Upstream commit c11eede powerpc: add missing explicit OF includes for ppc was
included in 3.13 and onwards, hence making those patches obsolete.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 42263
2014-08-23 02:42:03 +00:00
John Crispin
0aa8214ae9 umbim: add netifd proto handler for mbim style lte modems
tested on vodafone k5105

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42262
2014-08-22 19:02:30 +00:00
John Crispin
2d286dad6e base-files: properly generate the ula
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42261
2014-08-22 14:19:07 +00:00
Hauke Mehrtens
cc3545d165 bcm53xx: add bcm53xxspiflash driver for SPI flashes
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42260
2014-08-21 21:11:04 +00:00
Hauke Mehrtens
b118879cc3 bcm53xx: backport more spi-nor patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42259
2014-08-21 21:10:29 +00:00
Felix Fietkau
a81f356873 uclient: update to latest version, fixes HTTP keepalive issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42257
2014-08-21 19:12:38 +00:00
Felix Fietkau
53d1cb9409 xtables-addons: update to version 2.5
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 42256
2014-08-21 19:12:34 +00:00
Jonas Gorski
bb6905bd23 dropbear: restore performance by disabling mips16
Disable MIPS16 to prevent it negatively affecting performance.
Observed was a increase of connection delay from ~6 to ~11 seconds
and a reduction of scp speed from 1.1MB/s to 710kB/s on brcm63xx.

Fixes #15209.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42250
2014-08-21 11:29:04 +00:00
Jonas Gorski
932305f854 dropbear: fix keepalive more
Add a further upstream commit to more closely match the keepalive
to OpenSSH.

Should now really fix #17523.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42249
2014-08-21 11:29:02 +00:00
Jonas Gorski
51e1f1476f brcm63xx: Add DT support for P870HW-51a
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix nvram partition offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42248
2014-08-21 11:28:59 +00:00
Jonas Gorski
b339304425 brcm63xx: Add DT support for HG553
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix linux partition length]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42247
2014-08-21 11:28:54 +00:00
Jonas Gorski
2f09960e46 brcm63xx: Add DT support for HG520v
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: fix nvram partition offset]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42246
2014-08-21 11:28:46 +00:00
Jonas Gorski
7bc83fdd13 brcm63xx: Add DT support for A4001N
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42245
2014-08-21 11:28:43 +00:00
Jonas Gorski
a180c80f23 brcm63xx: Add DT support for A4001N1
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42244
2014-08-21 11:28:40 +00:00
Jonas Gorski
83651bad85 brcm63xx: Add DT support for WAP-5813n
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42243
2014-08-21 11:28:37 +00:00
Jonas Gorski
7b2d74a156 brcm63xx: Add DT support for VR-3025un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42242
2014-08-21 11:28:34 +00:00
Jonas Gorski
42bbf7bcb3 brcm63xx: Add DT support for VR-3025u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42241
2014-08-21 11:28:32 +00:00
Jonas Gorski
2936cacdfc brcm63xx: Add DT support for AR-5387un
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42240
2014-08-21 11:28:28 +00:00
Jonas Gorski
b97aa0b4fd brcm63xx: Add DT support for AR-5381u
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42239
2014-08-21 11:28:18 +00:00
Jonas Gorski
1891b08f00 brcm63xx: Add DT support for CT-6373
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42238
2014-08-21 11:28:14 +00:00
Jonas Gorski
e490cc7e14 brcm63xx: Add DT support for CT-5365
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
[jogo: make linux partition writable]
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42237
2014-08-21 11:28:10 +00:00
Jonas Gorski
e46d57b3af brcm63xx: use DT for partitions on SPW500V
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42236
2014-08-21 11:28:01 +00:00
Jonas Gorski
84001352fd brcm63xx: dts: fix spelling of "bank-width"
Fixes pflash registration through DT for 6338/6345/6348.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42235
2014-08-21 11:27:56 +00:00
Jonas Gorski
33e2a51d4d brcm63xx: dsl-274xb-c: linux partition should not be read-only
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 42234
2014-08-21 11:27:44 +00:00
John Crispin
b9ea44f947 firewall: the firewall did not start properly on boot
https://dev.openwrt.org/ticket/17593

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42233
2014-08-21 09:53:25 +00:00
John Crispin
e9e519a147 ramips: fix OMNI-PLUG.dts
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42232
2014-08-21 06:41:27 +00:00
John Crispin
db657af409 libubox: update to latest git revision
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42230
2014-08-20 18:21:59 +00:00
Nicolas Thill
62ae2d1af1 valgrind: fix build failure on uml
Signed-off-by: Nicolas Thill <nico@openwrt.org>

SVN-Revision: 42229
2014-08-20 13:58:23 +00:00
Steven Barth
929e73c7b6 base-files: increase igmp_max_memberships to improve multicast-proxy handling
SVN-Revision: 42227
2014-08-20 10:18:40 +00:00
Steven Barth
0f49b1940e dnsmasq: fix a race condition possibly leading to lockup
SVN-Revision: 42225
2014-08-20 09:52:29 +00:00
Hauke Mehrtens
f66a0912f7 bcm53xx: add SPI controller driver
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 42223
2014-08-19 20:14:06 +00:00
Hauke Mehrtens
bcb36cd494 bcm53xx: backport spi nor code form kernel v3.17-rc1.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42222
2014-08-19 20:12:36 +00:00
Hauke Mehrtens
a8bdf2f1e0 kernel: update bcma to code from v3.17-rc1
This is needed for some new patches.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 42221
2014-08-19 20:06:24 +00:00
John Crispin
9ba6cd186a base-files: fix inverse logic in board_detect script
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42220
2014-08-19 09:59:39 +00:00