Commit graph

253 commits

Author SHA1 Message Date
Stijn Tintel
880f73c327 kernel: cleanup CONFIG_SCHED_HRTICK
Remove CONFIG_SCHED_HRTICK from target configs, as it was added to the
generic config in b47fd76563.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
2017-06-29 04:46:59 +02:00
Sergey Ryazanov
68e7a2a0b7 kernel: disable CONFIG_SG_POOL by default
CONFIG_SG_POOL symbol is selected only by CONFIG_SCSI, since the last
one is disabled by default then disable CONFIG_SG_POOL by default too.
And explicitly enable it only for platforms that use CONFIG_SCSI.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>
2017-06-07 18:31:10 +02:00
Koen Vandeputte
3b4241071d imx6: disable UART dma
Fixes these prints on boot:

[   13.785600] imx-uart 2020000.serial: DMA transaction error.
[   13.793134] imx-uart 2020000.serial: DMA transaction error.
[   13.798721] imx-uart 2020000.serial: DMA transaction error.

Based on following upstream patch by Tim Harvey (Gateworks):

80a01b6582

TX complete DMA messages are getting missed.
This is also currently an issue in mainline.
For now we will disable DMA in serial/imx.c.

This resolves an issue encountered with RS485 transmit.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-05-31 08:45:26 +02:00
Koen Vandeputte
e842e16f45 kernel: update kernel 4.9 to 4.9.29
- Refresh all patches
- Removed upstreamed
- Adapted 1

Compile tested on: bcm53xx, cns3xxx, imx6, lantiq
Run tested on: cns3xxx & imx6

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[update from 4.9.28 to 4.9.29]
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-05-21 21:51:22 +02:00
Felix Fietkau
60081f9a00 imx6: remove linux 4.4 support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-05-02 15:17:30 +02:00
Tim Harvey
9d91ef52c3 imx6: ventana: add GW553x board identification
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-04-26 11:52:55 +02:00
Tim Harvey
456bd95023 imx6: disable MSI interrupts
The IMX6 PCIe host controller does not fire legacy interrupts if MSI is
enabled. A patch is being worked on to enable MSI at runtime only when
it is needed but meanwhile this patch will disable MSI for the imx6 kernel.

This fixes the no interrupt issue on cards/drivers that use legacy interrupts
such as ath9k.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-04-26 11:52:55 +02:00
Tim Harvey
bc1e7469aa imx6: apply upstream mmc fix for DDR50 cards on UHS-I capable boards
https://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git/commit/?h=fixes&id=9f327845358d3dd0d8a5a7a5436b0aa5c432e757

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-04-26 11:52:55 +02:00
Hauke Mehrtens
c3778f2647 kernel: update kernel 4.4 to 4.4.59
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2017-04-02 12:48:00 +02:00
Tim Harvey
b2255f3621 imx6: add DSA driver for MV88E6176 switch
The MV88E6176 switch is present on the GW16083 and the GW5904

As of a5c32a1f19 these drivers are to be
enabled static in per-target kernels.

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-12 15:06:52 +01:00
Tim Harvey
5f458bf7f8 imx6: add support for GW5904
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-12 15:06:51 +01:00
Tim Harvey
35d761c0c5 imx6: added fixfdt to bootscript
If a 'fixfdt' uboot script exists, execute it prior to bootm to allow
easy bootloader env based fdt fixups and tweaks

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-12 15:06:51 +01:00
Tim Harvey
028350907e imx6: add missing dtb for imx6dl-gw553x
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-12 15:06:51 +01:00
Tim Harvey
4cc70d8610 imx6: fix USB for 4.9 kernel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2017-03-12 15:06:50 +01:00
Tim Harvey
092f2c14bd imx6: move to Linux 4.9 kernel
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-02-11 15:38:11 +01:00
Koen Vandeputte
d99007d5a9 imx6: refresh kernel config
This key got moved to generic in commit:
7480d3309c

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2017-01-27 16:11:34 +01:00
Stijn Segers
20996edd68 Kernel: bump to 4.4.44
Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64.

.44 has been run-tested on the 17.01 branch here on ar71xx and mt7621.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2017-01-27 11:18:27 +01:00
Petr Štetiar
26e4fee6e2 imx6: kernel: Backport serial port fixes
Signed-off-by: Petr Štetiar <ynezz@true.cz>
2017-01-15 17:41:14 +01:00
Felix Fietkau
a2f6b56c8f imx6: enable the crypto acceleration driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
7450698957 imx6: enable the chipidea usb driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
7f0796d874 imx6: remove kmod-thermal-imx, it is already enabled in the kernel config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
348fedc1a6 imx6: build support for the ventana ethernet expansion board into the kernel instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
c524d1b256 imx6: enable the Freescale SNVS RTC driver in the kernel config instead of packaging it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-10 12:10:20 +01:00
Felix Fietkau
1c6b1ab01d imx6: fix image boot ubifs compression option
--force-compr was added by the xz compression patch, which is gone now.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 16:29:45 +01:00
Felix Fietkau
018d80007e kernel: remove ubifs xz decompression support
It has been unused, and less useful than squashfs for cases where flash
space usage matters.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2017-01-09 14:07:06 +01:00
Koen Vandeputte
d9c3727288 imx6: Add ds1672 RTC to kernel for working hctosys (Gateworks)
Fixes the same hctosys init issue as described in commit
5481ce9a11

The Gateworks Ventana family uses an emulated Dallas 1672
RTC device.

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2016-10-27 00:34:01 +02:00
Petr Štetiar
5481ce9a11 imx6: Add ds1307 RTC to kernel for working hctosys
Otherwise if we use ds1307 as kernel module, hctosys fails as ds1307 is
being initialized later then hctosys:

 [    2.427349] hctosys: unable to open rtc device (rtc0)
 [    3.714263] snvs_rtc 20cc000.snvs:snvs-rtc-lp: rtc core: registered 20cc000.snvs:snvs-r as rtc1
 [    8.990061] rtc-ds1307 3-006f: rtc core: registered mcp7941x as rtc0

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2016-10-26 09:41:29 +02:00
Petr Štetiar
5a922e5c41 imx6: inittab: Use login.sh wrapper so we can configure console password
In dc92917 there was introduced login.sh wrapper which allows
configuration of console passwords via UCI system ttylogin config
option.

Signed-off-by: Petr Štetiar <ynezz@true.cz>
2016-10-15 11:36:51 +02:00
Álvaro Fernández Rojas
41eab9048b kernel: update kernel 4.4 to version 4.4.21
Refresh patches for all targets that support kernel 4.4.
Compile-tested on brcm2708 only.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-09-16 10:17:27 +02:00
Felix Fietkau
d27bce8d28 build: drop UBI EOF marker from images by default
Only add them where they are actually required.
Should help with compatibility issues with stock U-Boot images that
access UBI

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-09-12 18:21:52 +02:00
Koen Vandeputte
d70b748942 imx6: Add static PCA953x support in kernel
commit a2386c384d requires the
module to be static in the kernel.

So lets actually add support for it inside the kernel config.
Tested on Ventana

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2016-09-10 12:17:39 +02:00
Mathias Kresin
e7ec7a08aa image: use k as unit suffix for blocksize
Use k as unit suffix for kilobyte to have a the same unit regardless of
the used filesystem.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-09-04 08:56:05 +02:00
Tim Harvey
7419b9497f imx6: override default inittab to add video console tty
Adds the following to the default inittab
tty1::askfirst:/bin/ash --login

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-08 15:28:39 +02:00
Tim Harvey
a2386c384d imx6: image: remove pca955x/ds1672/at24 from Ventana kernel modules
These need to be static in the kernel for Ventana

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-08 15:28:39 +02:00
Koen Vandeputte
911b6ca234 imx6: enable ARM crypto acceleration 2016-09-04 13:36:10 +02:00
Koen Vandeputte
0cf48c4407 imx6: refresh kernel config
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
2016-09-04 13:36:10 +02:00
Tim Harvey
3314bcf715 imx6: add GW553x support
The Gateworks Ventana GW553x is a single-board computer based on the NXP
IMX6 SoC with the following features:
 * IMX6 DualLite Soc (supports IMX6S,IMX6DL,IMX6Q)
 * small form factor (35x70mm)
 * 512MB DDR3 DRAM (2x32bit) (options up to 2GB)
 * 256MB NAND flash (4GB option)
 * Gateworks System Controller:
  - hardware watchdog
  - hardware monitor
  - pushbutton controller
  - EEPROM storage
  - power control
 * JTAG programmable
 * 1x miniPCI socket (with PCIe, USB, SIM)
 * 1x microSD socket
 * 1x SIM socket
 * Inertial Module (LSM9DS1 9DOF: 3x acc, 3x rate, 3x mag)
 * analog CVBS video in
 * GPS (optional uBlox EVA-M8M)
 * Application headers:
  - 2x TTL UART (TX/RX)
  - 4x TTL GPIO (3x configurable as PWM)
  - 3x CVBS Analog video input (1x decoder with 3x selectable inputs)
 * Front panel connectors:
  * micro-HDMI audio/video out
  - 1x user programmable LED
  - 1x configurable user pushbutton
  - 1x USB OTG

See http://www.gateworks.com for more info

Signed-off-by: Tim Harvey <tharvey@gateworks.com>
2016-09-04 13:36:10 +02:00
Felix Fietkau
d3730c9aca imx6: disable EOF markers on UBI
The boot loader does not recognize them and might mess up the volume

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-08-31 13:57:05 +02:00
Koen Vandeputte
dc765f64c5 imx6: Fix pointing to msata/mmc bootdevs
Point to correct devices when booting from msata or MMC
Changes fetched from Gateworks git

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[Jo-Philipp Wich: rebased to apply against current LEDE version]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-22 17:24:48 +02:00
Jo-Philipp Wich
35be928466 imx6: fix generating bootfs in imagebuilder (FS#102)
The image builder does not bundle sub-directories within $(KERNEL_BUILD_DIR),
therfore the intermediate "ventana-uImage.boot" directory is not shipped,
leading to failures with "make image" later on.

To circumvent the issue, store the intermediate boot files as tar archive
instead of putting them into a directory to ensure that they end up in the
final image builder tarball. Fixes FS#102

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-08-20 20:23:32 +02:00
Felix Fietkau
5d9a4c210d imx6: clean up / fix ventana image build code
Fix ubifs mkfs options
Use standard Build/* commands instead of doing everything in the hackish
ubi-boot-overlay template
Fix bootfs.tar.gz build error

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 19:35:05 +02:00
Felix Fietkau
468a9b7a77 imx6: use ubinize-image.sh to fix build with per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-31 19:35:05 +02:00
Felix Fietkau
8e2764ce9b image.mk: clean up redundant code related to DEVICE_DTS
It is used by a core build template, so the variable should be
initialized and added to DEVICE_VARS in the core.
Same for DEVICE_DTS_DIR

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-15 14:14:11 +02:00
Hauke Mehrtens
efa1960abb kernel: update kernel 4.4 to version 4.4.15
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-07-13 15:39:15 +02:00
Felix Fietkau
de165b66be imx6: fix redundant PROFILES overrides in image makefile
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:19 +02:00
Felix Fietkau
7e7a31e682 imx6: fix build breakage introduced in 9e41c3f54e
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:19 +02:00
Felix Fietkau
61d82e7b02 imx6: fix image makefile indentation for Device/ sections
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-02 19:34:19 +02:00
John Crispin
9e41c3f54e imx6: move profile definitions to the image/Makefile
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-23 11:03:23 +02:00
John Crispin
fa69553900 branding: add LEDE branding
Signed-off-by: John Crispin <blogic@openwrt.org>
2016-03-24 22:40:13 +01:00
Luka Perkov
d1005862c2 imx6: images: add bootfs.tar.gz build artifact
In order to create a bootable block storage device, both bootfs and rootfs
tarballs are required. However, our current scheme does not export a bootfs
tarball so add the packaging of it here.

Signed-off-by: Pushpal Sidhu <psidhu@gateworks.com>

SVN-Revision: 49196
2016-04-19 13:46:33 +00:00