Commit graph

50 commits

Author SHA1 Message Date
Mathias Kresin
8c822ec4ca uboot-lantiq: fix boot of images larger than 8MB
Increasing CONFIG_SYS_BOOTM_LEN from 8 MB to 16 MB is necessary to
support uncompressing images larger than 8 MB when using the bootm
command.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
Mathias Kresin
cfe1c6debe uboot-lantiq: fix build with gcc6
Backport u-boot commit 9b2c282b348dfe966bbba967dc7a45ce817cce50 to fix
compile with gcc5 and gcc6.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2017-01-02 19:16:54 +01:00
Felix Fietkau
720b99215d treewide: clean up download hashes
Replace *MD5SUM with *HASH, replace MD5 hashes with SHA256

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-12-16 22:39:22 +01:00
Mathias Kresin
36148d923b uboot-lantiq: Add BT Home Hub 5A support
Based on the submission to the uboot-lantiq repo by Martin Blumenstingl.

Use the ddr_settings.h from the GPL tarball. The NAND boot optimized
one (with memory tuning enabled) doesn't work for the UART boot image.

Use the same mtd layout as the stock u-boot. Add add UBI support.

Use the leds to indicate boot status like it is done with the stock
u-boot. Switch on the red power led if kernel image can't be loaded.
Otherwise switch the green led on.

Make only the ramboot u-boot available. Only this image is required for
the first installation of LEDE.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-11-29 21:40:16 +01:00
Eddi De Pieri
ea12a80276 uboot-lantiq: vgv7519 fix tftp loading of big kernel/image size
On my board:
Bytes transferred = 7084442 (6c199a hex)
   Image Name:   MIPS OpenWrt Linux-3.10.49
   Created:      2014-11-11  17:40:00 UTC
   Image Type:   MIPS Linux Kernel Image (lzma compressed)
   Data Size:    7084378 Bytes = 6.8 MiB
   Load Address: 80002000
   Entry Point:  80002000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... LZMA: uncompress or overwrite error
7 - must RESET b
ROM VER: 1.0.5
CFG 01

Signed-off-by: Eddi De Pieri <eddi@depieri.net>
2016-11-23 08:43:49 +01:00
John Crispin
10f9ea0bc6 uboot-lantiq: package does not build inside the SDK
the packages failed to build inside the SDK due to missing ethernet
firmware files.

Signed-off-by: John Crispin <john@phrozen.org>
2016-08-03 15:30:13 +02:00
Mathias Kresin
b32eb40210 uboot-lantiq: Add Arcadyan ARV7506PW11 support
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-06-22 19:32:06 +02:00
Felix Fietkau
57343b210a uboot-lantiq: get rid of bogus profile dependencies
Turn them into subtarget dependencies instead

Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-08 06:42:42 +02:00
Felix Fietkau
7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Mathias Kresin
c065cb08db uboot-lantiq: VGV7510KW22 - remove NOR SPL leftovers
Missed this one with my last cleanup patch.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
b0a202ebdc uboot-lantiq: Add Arcadyan VGV7519 support
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.

Major cleanup and addition of brnboot second stage u-boot was done by
me.

The second stage brnboot u-boot is untested, since the brnboot prompt
is secured by a still unknown password. But should work.

The former ram values are replaced with the ram values extracted from
the original brnboot. The old ones didn't worked with the ramboot
image.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
ecf10d3796 uboot-lantiq: vrx200 - lzma compress gphy firmware
The default bootloader partition of some devices is to small for an
u-boot with uncompressed gphy firmware(s).

Instead of increasing the bootloader partition size, in compare to the
stock firmware, compress the firmware. This would allow the bootloader
of at least the FritzBox 3370 as well as the bootloader of the
VGV7510KW22 to fit into the bootloader partition of the stock firmware.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
8df4eb0b9b uboot-lantiq: vrx200 - add support for dual nor flash
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.

Devices like the xrx200 Arcadyan VGV7519 are using two NOR flash chips.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
e81acacaa3 uboot-lantiq: ARV752DPW - use correct switch driver
There is no RTL8206 switch driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
a22feb4c78 uboot-lantiq: VGV7510KW22 - use ddr ram params from brnboot
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
382282eca9 uboot-lantiq: VGV7510KW22 - use leds to indicate boot status
Switch on the red power led if kernel image can't be loaded. Otherwise
switch the green led on.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
9e8edcff99 uboot-lantiq: VGV7510KW22 - cleanup board config
According to the author, all SPI related configs are copy & paste
leftovers. Which makes sense since nothing is connected to the SPI bus
on this device.

The NOR SPL isn't required for this board, since the NOR is directly
memory mapped.

Allow to overwrite the env in ram while using brn variant. Do not set
the power GPIO pin twice.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
b3795d0c93 uboot-lantiq: reorder and rework patches
use:
  - 00nn for u-boot patches
  - 01nn for new boards

While doing the rework, the board definitions for the easy50712 and
easy80920 were moved to distinct board definitions patches.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
Mathias Kresin
74b1687be3 uboot-lantiq: drop unused board patches
None of the boards is supported by lede. No need to keep the patches in
the lede tree.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-23 11:03:24 +02:00
John Crispin
786717a7ce uboot-lantiq: fix build with gcc5
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47863
2015-12-11 15:08:34 +00:00
John Crispin
67d890315c uboot-lantiq: Add SoC version 1.2 support for Arcadyan VGV7510KW22
This fixes #20409

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 47352
2015-11-02 10:18:24 +00:00
John Crispin
8a843b7b77 uboot-lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
uboot-lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)

Signed-off-by: Jannis Pinter <jannis@pinterjann.is>

SVN-Revision: 46225
2015-07-07 13:45:10 +00:00
John Crispin
bf4dbe05c6 uboot-lantiq: Add Arcadyan VGV7510KW22 support
This is already applied in Daniel's ("upstream") tree and thus will be
part of upcoming version(s).

SVN-Revision: 45898
2015-06-05 14:11:45 +00:00
John Crispin
c3f2e8fb08 uboot-lantiq: fix P-2812HNU-F1/3 package dependency
After r43987 TARGET_lantiq_xrx200_P2812HNUFX does not exist anymore.
Fix empty menuconfig bootloader selection by making u-boot depend on
one of the new target profiles.

Signed-off-by: Antti Seppälä <a.seppala@gmail.com>

SVN-Revision: 44179
2015-01-28 12:08:13 +00:00
John Crispin
255a680a99 uboot-lantiq: add a cgu fix for arx100
http://patchwork.ozlabs.org/patch/431024/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 44086
2015-01-23 12:32:54 +00:00
John Crispin
f76755da3f packages: fix typo in OpenWrt name
Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 43542
2014-12-07 16:53:30 +00:00
Luka Perkov
44d5800fe1 uboot-*: update license info in uboot packages
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 43429
2014-11-29 23:45:53 +00:00
John Crispin
74a3a77bcd license info - revert r43155
turns out that r43155 adds duplicate info.

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 43167
2014-11-03 09:56:44 +00:00
John Crispin
c10d97484a Add more license tags with SPDX identifiers
Note, that licensing stuff is a nightmare: many packages does not clearly
state their licenses, and often multiple source files are simply copied
together - each with different licensing information in the file headers.

I tried hard to ensure, that the license information extracted into the OpenWRT's
makefiles fit the "spirit" of the packages, e.g. such small packages which
come without a dedicated source archive "inherites" the OpenWRT's own license
in my opinion.

However, I can not garantee that I always picked the correct information
and/or did not miss license information.

Signed-off-by: Michael Heimpold <mhei@heimpold.de>

SVN-Revision: 43155
2014-11-03 08:01:08 +00:00
John Crispin
9cf5fbfaf0 lantiq: re-add 0041-lzma-fixup.patch to uboot
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41671
2014-07-16 10:43:44 +00:00
John Crispin
07fde034b0 lantiq: Add ARV7510PW22 support
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40918
2014-06-02 12:43:31 +00:00
Luka Perkov
15ff368d5f uboot-lantiq: remove duplicate define
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40779
2014-05-19 18:55:55 +00:00
John Crispin
a5cae0521e Add Zyxel P-2812HNU-Fx images
P-2812HNU-Fx images are already supported but not generated.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40548
2014-04-22 08:08:27 +00:00
John Crispin
a57ffc09a7 Add Fritz!Box 3370 images
Fritz!Box 3370 images are already supported but not generated.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40547
2014-04-22 08:08:23 +00:00
John Crispin
03a777c293 Refresh patches
Refresh uboot-lantiq patches.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40546
2014-04-22 08:08:19 +00:00
John Crispin
686a17e647 Create firmware directory if it doesn't exist
Fixes package refreshing.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40545
2014-04-22 08:08:15 +00:00
John Crispin
616f6da588 Depend on lantiq board
Depend on lantiq board.

ARV7510 depends on ARV4510 because (according to OpenWrt wiki) both boards are identical except for the unsupported WiFi. Moreover, ARV7510 isn't especifically supported and ARV4510 images valid.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 40544
2014-04-22 08:08:10 +00:00
John Crispin
13010f3adc lantiq: remove uboot lzma patch, apparently its not needed after all
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40521
2014-04-16 12:11:24 +00:00
John Crispin
69bac3e37e uboot-lantiq: backport lzma fix
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40520
2014-04-16 12:01:24 +00:00
John Crispin
3269f57c58 uboot-lantiq: enable parallel building
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40488
2014-04-12 21:21:40 +00:00
John Crispin
dcbaee4e77 uboot-lantiq: reuse/copy VR9 GPHY firmware blobs from target/linux/lantiq
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40487
2014-04-12 21:21:35 +00:00
John Crispin
28fcb00b44 uboot-lantiq: add packages for AudioCodes MP-252
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40486
2014-04-12 21:21:31 +00:00
John Crispin
dcf6f0e3f8 uboot-lantiq: add packages for various Arcadyan boards
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40485
2014-04-12 21:21:26 +00:00
John Crispin
b949a631fe uboot-lantiq: add packages for Lantiq EASY80920
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40484
2014-04-12 21:21:23 +00:00
John Crispin
de21f63d4a uboot-lantiq: add packages for Lantiq EASY50712
Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40483
2014-04-12 21:21:18 +00:00
John Crispin
1246dce0b3 uboot-lantiq: update to v2013.10
Patches created from tree:
git@github.com:danielschwierzeck/u-boot-lantiq.git
v2013.10..u-boot-lantiq-v2013.10-openwrt4

Signed-off-by: Daniel Schwierzeck <daniel.schwierzeck@gmail.com>

SVN-Revision: 40482
2014-04-12 21:21:14 +00:00
Felix Fietkau
e31ccd95c7 u-boot: prefer mirror2.openwrt.org over ftp.denx.de - the denx ftp is slow and unreliable
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 38559
2013-10-28 15:15:05 +00:00
Luka Perkov
2245726371 uboot-lantiq: upgrade to 2013.01
SVN-Revision: 35292
2013-01-22 12:55:01 +00:00
John Crispin
240a3a38e1 fixes uboot dependency
SVN-Revision: 34686
2012-12-15 01:59:35 +00:00
Luka Perkov
6db1b986ed uboot-lantiq: add new package
SVN-Revision: 34305
2012-11-23 18:16:05 +00:00