Commit graph

19 commits

Author SHA1 Message Date
Mathias Kresin
e07c80dfc8 lantiq: use aliases device tree node for leds
The chosen node is clearly the wrong place for aliases.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-10-05 19:23:23 +02:00
Daniel Gimpelevich
34fdfbf328 lantiq: Slow down SPI flash on the DGN3500
The bootloader uses 30 MHz as the SPI frequency for flash on the Germany and
North America models, and 50 MHz for it on the worldwide model, but the Lantiq
SPI driver in OpenWrt and LEDE may access the flash differently such that
writes are capped at 20 MHz, leading to read errors reported on the worldwide
model at 30 MHz.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Acked-by: Kevin Darbyshire-Bryant <kevin@darbyshire-bryant.me.uk>
2016-06-22 19:32:06 +02:00
Daniel Gimpelevich
2b4e5d478b kernel: remove a hack that was obsoleted upstream
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2016-05-27 16:08:47 +02:00
Daniel Gimpelevich
e8780b643b lantiq: Use the correct SPI flash speed for the Netgear DGN3500
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2016-05-27 16:08:47 +02:00
blogic
b7fc892eb5 lantiq: move partitions into partion table node
Starting with kernel 4.4, the use of partitions as direct subnodes of the
mtd device is discouraged and only supported for backward compatiblity
reasons.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49280
2016-05-10 10:43:12 +02:00
Felix Fietkau
04ad02d132 lantiq: Switch to the new SPI driver
Compared to the "old" driver:
- Each device must assign a pinctrl setting to the SPI node to allow the
  new SPI driver to configure the SPI pins.
  While here we are also using separate input and output settings so we
  are independent of whether the bootloader configures the pins correctly.
- We use the new "compatible" strings to make the driver choose the
  correct number of chip-selects for each SoC.
- The new driver starts counting the chip-selects at 1 (instead of 0, like
  the old one did). Thus we have to adjust the devices accordingly.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48293
2016-01-17 19:56:03 +00:00
Felix Fietkau
d5c5928d6b lantiq: Enable the hardware SPI driver on the DGN3500/DGN3500B
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 48290
2016-01-17 19:55:42 +00:00
John Crispin
3cbfc74cde lantiq: use devicename:colour:function led naming scheme
The leds of the following boards are not renamed due to lack of
manuals/informations:

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48042
2016-01-01 21:18:54 +00:00
John Crispin
4cf3fd49fc lantiq: add support for indicating the boot state using three leds
The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to
indicate the current boot state. This patch adds support for such cases.

The existing led sequences should be the same as before.

Boards which are using a led different from power (like TDW89x0) are
changed to switch of the led after boot

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48041
2016-01-01 21:18:47 +00:00
John Crispin
a3042500ab lantiq: define default leds in dts files
- ARV7525PW: use the power led as dsl led as done by the stock firmware
- FRITZ3370: use the info led as internet led
- FRITZ7320: use the power led as dsl led as done by the stock firmware

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48037
2016-01-01 21:18:08 +00:00
Felix Fietkau
46112609d0 lantiq: fix up m25p80 device ids (#20975)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47690
2015-12-02 17:20:39 +00:00
John Crispin
440d9ddf7f lantiq: fix DGN3500 root device
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 44428
2015-02-13 07:29:17 +00:00
John Crispin
fcbc21890c lantiq: DGN3500 cleanups
This patch builds on the previous three to streamline support for the
Netgear DGN3500.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 44032
2015-01-18 09:41:04 +00:00
John Crispin
000cefd85e lantiq: DGN3500 fixups
Just fixing up a few things for the Netgear DGN3500.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 38733
2013-11-11 13:15:08 +00:00
John Crispin
0782501483 lantiq: update dts files
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 38027
2013-09-17 21:45:50 +00:00
John Crispin
bfc7007226 lantiq: Add support for loading athxk eeproms through mtd
This patch enables retrieving the wifi calibration data from an MTD partition.
Try to copy mac address from ethernet before generating a random one.
This fixes DGN3500 ath9k support.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 37087
2013-06-29 16:33:46 +00:00
Luka Perkov
da7590cd21 lantiq: fix formating in .dts files
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 36882
2013-06-08 11:36:07 +00:00
John Crispin
090a75447b lantiq: DGN3500 support
This requires all the preceding patches and finishes support for the
DGN3500, also removing an obsolete file.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 36781
2013-05-30 16:00:50 +00:00
John Crispin
157c86371f lantiq: move dts files to thir own folder
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
2013-04-25 19:03:32 +00:00
Renamed from target/linux/lantiq/image/DGN3500.dtsi (Browse further)