Commit graph

29791 commits

Author SHA1 Message Date
John Crispin
64ccdb98fb ar8216: introduce ar8xxx_reg_clear complementing ar8xxx_reg_set
Introduce ar8xxx_reg_clear complementing ar8xxx_reg_set.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44004
2015-01-17 14:24:56 +00:00
John Crispin
0fb39e6f4b ar8216: replace ar8xxx_rmw with ar8xxx_reg_set where appropriate
Replace ar8xxx_rmw with ar8xxx_reg_set where appropriate.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44003
2015-01-17 14:24:47 +00:00
John Crispin
1cb2596f19 ar8216: define all switch_addr structs as const
Define all switch_addr structs as const.

Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>

SVN-Revision: 44002
2015-01-17 14:24:40 +00:00
John Crispin
88df2bd2ff ramips: add support for Intenso Memory 2 Move USB 3.0
This adds support for a rt5350-based "portable nas" solution
from Intenso. The board comes with 32M RAM and 8M Flash, the
built-in HDD is connected/accessible via a usb3.0<->sata
bridge VLI VL701.

The device has 1 Ethernet port (100M/10M), 1 micro b usb 3.0
socket (for charging the battery, or accessing the hdd directly).
Wireless connectivity is provided by the rt5350 SoC [i.e.:
802.11n 1x1 2.4 GHz with a pcb antenna.]

Serial, leds, wifi, ethernet and usb are tested and
as far as I can tell: they are working fine (tm).

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>

SVN-Revision: 44001
2015-01-17 14:06:13 +00:00
John Crispin
744298b8a0 base-files: Add ucidef_set_led_timer to uci-defaults.sh
Signed-off-by: Gerald Kerma <dreagle@doukki.net>

SVN-Revision: 44000
2015-01-17 13:58:14 +00:00
John Crispin
5010e2d2dd modules: Add kmod-w1-slave-ds2413
This patch adds support for building the ds2413 one-wire kernel module.

Signed-off-by: Wouter Paesen <wouter@blue-gate.be>

SVN-Revision: 43999
2015-01-17 13:58:09 +00:00
John Crispin
09a08fb9e6 toolchain: Add libatomic when using external toolchain
Otherwise libatomic cannot be used in conjunction with external toolchains.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>

SVN-Revision: 43998
2015-01-17 13:58:03 +00:00
John Crispin
ff3448adaa curl: allow enabling https protocol
Provide optional --enable-https flag for curl.

Signed-off-by: Lars Kruse <devel@sumpfralle.de>

SVN-Revision: 43997
2015-01-17 13:57:56 +00:00
Felix Fietkau
6774c43dde add iperf3, a new and smaller version of iperf
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43996
2015-01-17 13:14:02 +00:00
Felix Fietkau
00db07be58 ramips: fix tx bql related race condition in the ethernet driver
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43995
2015-01-17 13:13:55 +00:00
John Crispin
748d452899 add pkgconfig information for popt library
Modify makefile to record pkgconfig information for the popt library.

Signed-off-by: Mike Brady <mikebrady@eircom.net>

SVN-Revision: 43994
2015-01-17 12:52:28 +00:00
Steven Barth
18f76fbef1 iproute2: add package for bridge program
The 'bridge' program has been part of iproute2 for a while, and it was once
declared[1] to the the intended longterm replacement for bridge-utils, but
its features are still mostly distinct[2] from the venerable brctl.

[1] http://lwn.net/Articles/435845/
[2] http://sgros-students.blogspot.com/2013/11/comparison-of-brctl-and-bridge-commands.html

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 43993
2015-01-17 10:58:34 +00:00
Steven Barth
d644d1bd5e iproute2: fix header problem for musl
iproute2 includes "sanitized" linux kernel headers, which work fine for uClibc, however
with musl there is some header conflict, principally some ipv6 structure redefinition.  This
patch removes <linux/in6.h> from include/linux/if_bridge.h to solve the problem.

Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 43992
2015-01-17 10:58:29 +00:00
Steven Barth
148684bbf4 iproute2: bump version to 3.18.0
Signed-off-by: Russell Senior <russell@personaltelco.net>

SVN-Revision: 43991
2015-01-17 10:58:22 +00:00
John Crispin
7a65864344 ralink: add support for Kingston MLWG2
This patch adds support for the Kingston Mobilelite Wireless G2 (MLWG2)

http://wiki.openwrt.org/toh/kingston/mlwg2

https://github.com/gmacario/kingston-mlwg2-hack/wiki/Testing-OpenWrt-on-MLWG2

Tested-by: Gianpaolo Macario <gmacario@gmail.com>

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 43990
2015-01-17 07:07:36 +00:00
John Crispin
03a708a0db kernel: add references to openwrt alternative button handling
Add documentation that makes it easier to find the alternative,
recommended, and default handling for buttons in OpenWrt.

Signed-off-by: Karl Palsson <karlp@tweak.net.au>

SVN-Revision: 43989
2015-01-17 07:07:28 +00:00
John Crispin
8cbf97e936 Remove old P2812HNUFX dts
Remove unused P2812HNUFX board definition.

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43988
2015-01-17 07:07:21 +00:00
John Crispin
7f77870c19 Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43987
2015-01-17 07:07:15 +00:00
John Crispin
b4d2b69c43 lantiq: Add device tree for P2812HNUF1 and P2812HNUF3
Add device tree for P2812HNUF1 and P2812HNUF3.

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43986
2015-01-17 07:07:06 +00:00
John Crispin
56a54515df ramips: add i2c pingroup to the pinmux for rt-n14u
i2c pins are wired to wps a reset button

Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>

SVN-Revision: 43985
2015-01-17 07:06:59 +00:00
John Crispin
27b82a7990 ramips: fix default led configuration for rt-n14u
use new helper function to generate default led configuration

Signed-off-by: Pavel Löbl <lobl.pavel@gmail.com>

SVN-Revision: 43984
2015-01-17 07:06:51 +00:00
John Crispin
b5f9e5e454 ar71xx: fix board detection for TP-LINK TL-WA860RE
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 43983
2015-01-17 07:06:45 +00:00
Jo-Philipp Wich
59cab6dd48 dnsmasq: support and use local-service by default (#14951)
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43982
2015-01-16 19:04:19 +00:00
Rafał Miłecki
71c8ec020d bcm53xx: drop hacky patch making bcma init later
The only reason this patch was helping was moving bcma init *after*
of_serial init. It was a bit of luck because both drivers use
device_initcall.
It isn't really a correct way to provide early logging.
Now we have earlyprintk support in bcm53xx we can drop this patch.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43981
2015-01-16 15:59:29 +00:00
Rafał Miłecki
757b45a32f config: enable EARLY_PRINTK on bcm53xx by default
It's useful for debugging and safe at the same time as we enable it per
device.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43980
2015-01-16 14:50:51 +00:00
Rafał Miłecki
3bdf05441a brcm47xx: backport BCM47XX arch patches (clean NVRAM code, later init)
SVN-Revision: 43979
2015-01-16 12:48:27 +00:00
Imre Kaloz
8a103d5c56 mvebu: fixups for the new driver
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43978
2015-01-16 08:44:15 +00:00
Felix Fietkau
8e20e09d1b musl: update to version 1.1.6
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43977
2015-01-15 21:40:44 +00:00
Steven Barth
3138207f48 openssl: update to 1.0.1l *sigh*
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43976
2015-01-15 17:59:06 +00:00
Imre Kaloz
9a8bf84879 mvebu: add the new tlc59116 driver and migrate the Mamba to it
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43975
2015-01-15 13:59:01 +00:00
Felix Fietkau
f1c5232f4d ar71xx: fix disable_irq() on chained irq handlers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43974
2015-01-15 12:19:20 +00:00
Felix Fietkau
4f2fe5d7fa kernel: fix disable_irq() on MIPS CPU IRQs
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43973
2015-01-15 12:19:12 +00:00
Rafał Miłecki
4ae1e883e8 bcm53xx: support all RAM on devices with more than 128 MiB (HIGHMEM)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43972
2015-01-14 13:41:05 +00:00
Felix Fietkau
a570ccd7e2 ath9k: fix irq storm issues (#18483)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43971
2015-01-14 13:20:38 +00:00
Imre Kaloz
4f06ba0727 malta: copy initramfs images
Malta ramdisk images are no longer copied to output due to a recent change.
This change reimplements copying of ramdisk images for Malta builds.

Signed-off-by: Eric Schultz <eschultz@prplfoundation.org>

SVN-Revision: 43970
2015-01-14 12:09:33 +00:00
Imre Kaloz
a72bf9f3d2 mvebu: Switch to the generic mkuimage macro
The mvebu image makefile define something almost identical to the generic
implementation found in include/image.mk.

Switch to this implementation.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

SVN-Revision: 43969
2015-01-14 11:39:20 +00:00
Imre Kaloz
91b79128dc mvebu: Replace the padjffs2 call by the generic definition
The mvebu image Makefile directly calls the padjffs2 utility, while there's an
generic make function to do just that. Switch to it

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>

SVN-Revision: 43968
2015-01-14 11:37:29 +00:00
Luka Perkov
5b0849b97f mdns: install uci package as config
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 43967
2015-01-14 09:59:26 +00:00
Imre Kaloz
3a9e3dfa95 netfilter: handle NFT_MASQ_IPV6
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43966
2015-01-14 08:53:11 +00:00
Rafał Miłecki
f59c84c431 bcm53xx: enable earlyprintk on more devices
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43965
2015-01-14 07:42:48 +00:00
Rafał Miłecki
8e95c2c5be bcm53xx: enable HIGHMEM to support more than 128 MiB of RAM
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43964
2015-01-14 07:03:42 +00:00
Rafał Miłecki
55e766d78d bcm53xx: refresh configs
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43963
2015-01-14 07:03:17 +00:00
Steven Barth
252bb0eeae map: export calculated ruleset to /tmp
Signed-off-by: Steven Barth <steven@midlink.org>

SVN-Revision: 43961
2015-01-13 19:00:39 +00:00
Jo-Philipp Wich
2b366700b0 tools: libtool relocatable fixes
Make sure that libtool and libtoolize call grep relative to
$STAGING_DIR as well.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43960
2015-01-13 10:23:44 +00:00
Jo-Philipp Wich
90283e410b tools: bootstrap libtool to pickup the correct in-tree automake
Also fix 000-relocatable.patch to avoid accidential sed invocations in bootstrap.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43959
2015-01-13 07:49:10 +00:00
Jo-Philipp Wich
73a1f3597b tools: bootstrap automake to pickup the correct in-tree autoconf
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43958
2015-01-13 07:49:01 +00:00
Jo-Philipp Wich
6dec519be7 tools: add dummy scripts for help2man and makeinfo
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43957
2015-01-13 07:48:52 +00:00
Jo-Philipp Wich
1070fec51f tools: change automake depends to libtool depends
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43956
2015-01-13 07:48:37 +00:00
Jo-Philipp Wich
eca61e8c44 tools: make libtool depend on automake, not vice versa
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 43955
2015-01-13 07:48:24 +00:00
Felix Fietkau
bc78885e70 ramips: add missing -Os cflag for mt7621
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43954
2015-01-13 00:34:49 +00:00