KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
21275 commits 1 branch 0 tags 154 MiB
Commit graph

8574 commits

Author SHA1 Message Date
Florian Fainelli
5e877f02b4 nuport-mac: close possible race condition during start 
SVN-Revision: 33069
 2012-08-08 21:51:13 +00:00
Florian Fainelli
35351a28b9 nuport-mac: unmap the DMA buffer when closing device 
SVN-Revision: 33068
 2012-08-08 21:51:09 +00:00
Florian Fainelli
b77494fa2f nuport-mac: check dma_map_single address return values 
SVN-Revision: 33067
 2012-08-08 21:51:04 +00:00
Florian Fainelli
798cc28d73 build a Devolo dLAN USB Extender specific image 
The kernel has to be rounded up to the nearest 1MB, then we append
the root filesystem at its end.

SVN-Revision: 33066
 2012-08-08 21:51:00 +00:00
Florian Fainelli
f8386ecbc6 cleanup image generation 
SVN-Revision: 33065
 2012-08-08 21:50:55 +00:00
John Crispin
64b385dda7 pci gpio mapping 
This patch fixes the GPIO ALTSEL settings for some of the GPIOs used by the PCI subsystem in Lantiq Danube. These changes are required for more than one PCI device to work. Tested with an ARV7510PW having two PCI-devices; a VIA USB controller and a Ralink WLAN mini-PCI card.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>

SVN-Revision: 33054
 2012-08-08 12:14:43 +00:00
Jonas Gorski
4feeda756e bcm63xx: fix USB base registers and IRQs for BCM6328 
SVN-Revision: 33005
 2012-08-05 23:18:22 +00:00
Hauke Mehrtens
a0fb060211 update tg3 driver 
SVN-Revision: 33004
 2012-08-05 20:27:40 +00:00
Hauke Mehrtens
35661401da generate image for Linksys e3200 
SVN-Revision: 33003
 2012-08-05 13:14:00 +00:00
Hauke Mehrtens
a71f347c30 brcm47xx: update gpio patch 
SVN-Revision: 33001
 2012-08-05 12:40:05 +00:00
Hauke Mehrtens
1d40a652ee brcm47xx: fix patch which moves the flash struct in wgt634u code 
SVN-Revision: 33000
 2012-08-05 12:39:15 +00:00
John Crispin
5f438c3565 W502V/ARV4525 wireless mac bugfix 
The ARV4525 board init is passing the wrong offset to
arv_register_ath5k() resulting in a bogus mac.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 32993
 2012-08-04 20:14:52 +00:00
Hauke Mehrtens
0758996824 brcm47xx: use libgpio instaed of implementing the gpio interface ourself. 
SVN-Revision: 32992
 2012-08-04 19:46:25 +00:00
John Crispin
060b161ca6 cleanup patches 
SVN-Revision: 32953
 2012-08-03 08:53:02 +00:00
Florian Fainelli
162e272b4b nuport-mac: properly protect the phy interrupt handler 
SVN-Revision: 32951
 2012-08-02 18:13:17 +00:00
John Crispin
f45132d1d4 Codel: avoid a nul rec_inv_sqrt 
One condition before codel_Newton_step() was not good if
we never left the dropping state for a flow. As a result
rec_inv_sqrt was 0, instead of the ~0 initial value.

codel control law was then set to a very aggressive mode, dropping
many packets before reaching 'target' and recovering from this problem.

Brought over from 3.5-stable

Signed-off-by: Dave Taht <dave.taht@bufferbloat.net>

SVN-Revision: 32950
 2012-08-02 13:39:50 +00:00
John Crispin
c2d3274ffc fixes i2c clock enable 
SVN-Revision: 32949
 2012-08-02 13:29:49 +00:00
Gabor Juhos
e320a7e649 ar71xx: simplify misc IRQ handling 
SVN-Revision: 32948
 2012-08-02 11:25:49 +00:00
Gabor Juhos
3e1e52a524 ar71xx: fix AR934X_EHCI_SIZE 
SVN-Revision: 32947
 2012-08-02 11:25:46 +00:00
Gabor Juhos
b873051706 ar71xx: image: stop the switch from the lzma-loader on the TL-WR1043ND 
SVN-Revision: 32946
 2012-08-02 09:54:41 +00:00
Gabor Juhos
e29d6bec6f ar71xx: image: allow to use board specific code in the lzma-loader 
SVN-Revision: 32945
 2012-08-02 09:54:33 +00:00
Gabor Juhos
79a8660d67 ar71xx: init switch hw_reset on the TL-WR1043ND board 
SVN-Revision: 32944
 2012-08-02 09:54:28 +00:00
Gabor Juhos
e2782eae8e generic: rtl836x: add hw_reset field to struct rtl8366_smi 
It will be used to start/stop the switch if that is
supported by the given board.

SVN-Revision: 32943
 2012-08-02 09:54:21 +00:00
Gabor Juhos
614ca3cc9e generic: rtl8366_smi: use __rtl8366_smi_cleanup instead of gpio_free calls 
SVN-Revision: 32942
 2012-08-02 09:54:13 +00:00
Florian Fainelli
9f011e7225 add missing netmask to the network config 
SVN-Revision: 32941
 2012-08-01 22:09:13 +00:00
Florian Fainelli
5133a44785 assume the link is up and full-duplex by default 
SVN-Revision: 32940
 2012-08-01 21:56:54 +00:00
Florian Fainelli
56aac45139 add a default and suitable network config file 
SVN-Revision: 32939
 2012-08-01 21:56:49 +00:00
Gabor Juhos
563400ef10 ar71xx: ew-dorin: added router firmware generation 
[juhosg: remove dead code]

Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32934
 2012-08-01 12:24:57 +00:00
Gabor Juhos
8eabe64e6b ar71xx: ew-dorin: added USB support 
Signed-off-by: embedded wireless GmbH <info@embeddedwireless.de>

SVN-Revision: 32933
 2012-08-01 12:24:56 +00:00
Gabor Juhos
1af4fd7660 ar71xx: Buffalo WLAE-AG300N wireless led patch 
Here is the uci-defaults version of the led support for
the Buffalo WLAE-AG300N.

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32932
 2012-08-01 12:24:54 +00:00
Gabor Juhos
010aec0619 ar71xx: Buffalo WLAE-AG300N initial support 
The patch set for Buffalo WLAE-AG300N initial support.

There is another patch for wireless led support that
is posted separately.

Note on serial console:
This unit has buffalo standard 4 pin console, but the unit may not power
on if some console apparatus is connected. This is probably due to some
electronic interaction between the unit's electronic power switch circuit
and the serial console apparatus. If this happens, it is required to power
on the unit without the console, then quickly (re-)attach it.

[juhosg: fix coding style]

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 32931
 2012-08-01 12:24:52 +00:00
Florian Fainelli
df48d71d72 resync defconfig enable XZ compression 
SVN-Revision: 32930
 2012-08-01 12:01:27 +00:00
Florian Fainelli
3cd753408d properly generate squashfs, jffs2 and initramfs images and kernels 
SVN-Revision: 32927
 2012-07-31 23:09:50 +00:00
Florian Fainelli
c0561a42e7 disable crashlog on ARM platforms for the moment 
It is currently badly broken on ARM, until fixed, disable it

SVN-Revision: 32926
 2012-07-31 23:09:46 +00:00
John Crispin
f5f36911f0 add lantiq svip support 
SVN-Revision: 32925
 2012-07-31 18:49:54 +00:00
Jonas Gorski
07c4524d33 bcm63xx: Add nb6 support (BCM6362 SoC base boards) 
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>
[jonas.gorski@gmail.com: add network config for nb6, make switch fix a
platform patch]

SVN-Revision: 32924
 2012-07-31 14:27:47 +00:00
Jonas Gorski
820c224029 bcm63xx: add basic bcm6362 support 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32923
 2012-07-31 14:27:42 +00:00
Jonas Gorski
dcd339ac9d bcm63xx: enable usb for bcm6328 
Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32922
 2012-07-31 14:27:34 +00:00
Jonas Gorski
94d257a851 bcm63xx: update enetswitch driver 
Update enetswith driver with latest fixes and additions.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32921
 2012-07-31 14:27:31 +00:00
Jonas Gorski
fa75bd977a bcm63xx: reorder patches 
Fix the order and names of patches.

Signed-off-by: Jonas Gorski <jonas.gorski+openwrt@gmail.com>

SVN-Revision: 32920
 2012-07-31 14:27:25 +00:00
Florian Fainelli
d1ab4df0d6 move i2c module to target modules.mk 
SVN-Revision: 32910
 2012-07-29 13:20:51 +00:00
Florian Fainelli
a5738c960a resync config 
SVN-Revision: 32908
 2012-07-29 13:20:39 +00:00
Florian Fainelli
17244dea00 use the same description as other omap platforms (without the dash) 
SVN-Revision: 32907
 2012-07-29 13:20:35 +00:00
John Crispin
ee0946a5f4 refresh pwm patch 
SVN-Revision: 32905
 2012-07-29 11:53:06 +00:00
John Crispin
101766fb00 clean up pwm patches and drivers 
SVN-Revision: 32901
 2012-07-28 20:47:08 +00:00
Hauke Mehrtens
f0fe59648a add config option CONFIG_I2C_MV64XXX to fix kirkwood build 
SVN-Revision: 32898
 2012-07-28 11:36:52 +00:00
Florian Fainelli
67891c26ec resync config 
SVN-Revision: 32895
 2012-07-27 15:35:15 +00:00
Florian Fainelli
a4d699ccf0 fix DVA-G3810BN image generation 
Attached patch fixes a typo in the image Makefile, and overrides the
board name for DVA-G3810BN to set the correct board properties

Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32894
 2012-07-27 15:35:12 +00:00
Florian Fainelli
c6813d33f3 add D-link DVA-G3810BN-TL-1 support 
Signed-Off-By: Jeroen van Bemmel <jbemmel@zonnet.nl>

SVN-Revision: 32893
 2012-07-27 15:35:09 +00:00
Florian Fainelli
18206793b2 Add CT6376-1 board support 
Added CT6373 devices instead of using NB4's devices, as Florian suggested.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 32892
 2012-07-27 15:35:05 +00:00