Commit graph

96 commits

Author SHA1 Message Date
Daniel Gimpelevich
492964e741 lantiq: Use correct macaddr generating logic for the DGN3500
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2016-05-27 16:08:47 +02:00
Mathias Kresin
1e395608cc lantiq: VGV7519 - add vlan support
Add the lantiq,switch property to enable vlans and setup them up.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:16 +02:00
Mohammed Berdai
f778cdd9c9 lantiq: fix ARV4518PWR01 network
This patch fixes the missing Lan interface config in the file
/etc/config/network for ARV4518PWR01/A which results in eth0 and br-lan
being down and therefore no way to access the router unless via UART-TTL.

Signed-off-by: Mohammed Berdai <mohammed.berdai@gmail.com>
2016-05-27 15:50:16 +02:00
John Crispin
dc92917409 image / basefiles: make console password configurable
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-18 21:53:07 +02:00
John Crispin
0a4f2b5920 lantiq: Fix typo in LED diag script.
Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>
Acked-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 49242
2016-04-26 11:43:31 +00:00
Felix Fietkau
4ac99abeb3 lantiq: do not set default firmware file
We are now shipping a DSL firmware, do not set it by default to some
file name.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48941
2016-03-07 11:03:18 +00:00
Hauke Mehrtens
13b8b8c2e7 lantiq: add support for TP-Link VR200v
This adds basic support for TP-Link VR200v.
Currently the following parts are not working: FXO, Voice, DECT, WIFI (both)

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48328
2016-01-18 20:40:03 +00:00
Felix Fietkau
6cec31da3c lantiq: fix VDSL device detection with Linux 4.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48319
2016-01-18 15:35:17 +00:00
John Crispin
6f95d749d6 lantiq: match default xdsl mode and default wan interface
Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48047
2016-01-01 21:19:32 +00:00
John Crispin
3cbfc74cde lantiq: use devicename:colour:function led naming scheme
The leds of the following boards are not renamed due to lack of
manuals/informations:

- ARV7519PW
- ARV7510PW22
- ARV4510PW

The leds of the ARV4518PWR01* boards are unchanged, since the leds doesn't
match the leds from the manual or pictures (e.g. there shouldn't be a wps led).

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48042
2016-01-01 21:18:54 +00:00
John Crispin
4cf3fd49fc lantiq: add support for indicating the boot state using three leds
The BTHOMEHUBV5A has a RGB power led, where every colour is perfect to
indicate the current boot state. This patch adds support for such cases.

The existing led sequences should be the same as before.

Boards which are using a led different from power (like TDW89x0) are
changed to switch of the led after boot

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48041
2016-01-01 21:18:47 +00:00
John Crispin
ebc71a4d16 lantiq: use dsl led defined in DTS
dsl_control (dsl_notify.sh) is the only process which is aware of the
state of the atm/ptm interface. Use the dsl led exclusive for the dsl
line state.

On boards which don't have a distinct internet and a dsl led, let the
netdev status of the atm interface trigger the shared led.

Triggering the shared led according to the status of the ppp interface
isn't suitable, since the led would be switched of if the ppp
connection goes down, but the line is still in sync.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48040
2016-01-01 21:18:38 +00:00
John Crispin
a3c3b2a9a8 lantiq: use power leds defined in DTS
Use the power leds defined in the dts file instead of hardcoded led names.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48039
2016-01-01 21:18:30 +00:00
John Crispin
d7a5d66ea1 lantiq: use default leds defined in DTS
Remove all now double defined leds from the led board file. Use pppoe
as default for all broadband connections, since it's the default in
OpenWrt now.

Rename the the wifi leds to make sure, the not applicable default
values get overwritten.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48038
2016-01-01 21:18:21 +00:00
John Crispin
b6b128f63d lantiq: BTHOMEHUBV2B - remove missing usb led workaround
The workaround shouldn't be in the default configuration.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 48032
2016-01-01 21:17:34 +00:00
John Crispin
ab77d4bcb9 lantiq: Fix LED handling.
- Use common OpenWrt blink patterns instead of custom ones
- Add preinit_regular hook
- Handle the TDW89X0 that does not have a configurable power LED

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 47914
2015-12-17 09:27:52 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
John Crispin
787120e3a3 lantiq: fix led setup after switch to uci-defaults-new.sh
The switch to uci-defaults-new.sh revealed a bug in the former used
uci-defaults.sh, which failed to add leds with colons in the led name.

This bug isn't any longer present in uci-defaults-new.sh and therefore
all via DT defined leds will be added to /etc/config/system with their initial
on/off state, regardless whether they are already added by the board specific
led mappings.

This results for a BTHOMEHUBV5A into the following led configuration:

- soc:blue:power is added as led_power with the initial state "switched on"
- soc:blue:power is added as led_soc_blue_power with the initial state "switched off"

With the final result of a switched off power led after boot.

The only led that needs to be added is the BTHOMEHUBV5A specific dimmed led.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47850
2015-12-11 15:05:30 +00:00
Jo-Philipp Wich
9157360ac5 lantiq: fix logic error in dsl board.d code
Starting with r47755 the pppoe wan interface section isn't any longer added to
the network config on firstboot, using the default configuration. Since the
commit message does not mention such a change, I assume that this wasn't
intentionally.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47793
2015-12-06 08:41:22 +00:00
Felix Fietkau
e82404ce6c lantiq: get rid of the dsl_fw mtd partition
Now that we have redistributable vdsl/adsl firmware blobs in /lib/firmware,
we can drop the dsl_fw partition and extend the firmware partition.

Signed-off-by: Andre Heider <a.heider@gmail.com>

SVN-Revision: 47783
2015-12-05 09:52:30 +00:00
Felix Fietkau
435e7fb295 lantiq: move esi calls to dsl_cpe_control scripts to fix ordering wrt. loading vr9 drivers
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47764
2015-12-04 17:42:51 +00:00
Jo-Philipp Wich
5ebc5de49d lantiq: switch from uci-defaults to board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47755
2015-12-04 12:32:44 +00:00
John Crispin
a0543c2bdc lantiq: several ARV7519RW22 fixes
Fixes ARV7519RW22 flash register (only 1 flash).
Power LED is green, not red.
Rename message LEDs to internet.
Add LEDs configuration (lan, wan, power).
Enable switch VLANs.
Fix secondary USB.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 47132
2015-10-05 10:28:34 +00:00
John Crispin
161179f40b lantiq: Add target TP-Link TD-W8980
The device is similar to the TD-W8970, beside a different Atheros 2.4 GHz
wireless chip and the additional, PCI connected, WAVE300 5 GHz wireless.

Signed-off-by: Mathias Kresin <openwrt@kresin.me>

SVN-Revision: 47130
2015-10-05 10:28:19 +00:00
John Crispin
b9963bbe80 lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)
lantiq: Add support for Arcadyan ARV8539PW22 (Speedport W 504V)

Signed-off-by: Jannis Pinter <jannis@pinterjann.is>

SVN-Revision: 46224
2015-07-07 13:44:58 +00:00
John Crispin
6bdd209f15 lantiq: Add support for the BT Home Hub 5A
u-boot support depends on the next "upstream" version ([0]) from
Daniel Schwierzeck.
Since the installation process is quite complicated a "how to" was
added to the wiki: [1]

[0] https://github.com/danielschwierzeck/u-boot-lantiq/tree/openwrt/v2014.01-next
[1] http://wiki.openwrt.org/toh/bt/homehub_v5a

V2: Use the correct PCI interrupt (fixes 2.4GHz wifi)
Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>

SVN-Revision: 46223
2015-07-07 13:44:53 +00:00
John Crispin
ca1db6b5ce lantiq: Add support for Arcadyan VGV7510KW22 (known as o2 Box 6431)
SVN-Revision: 45897
2015-06-05 14:11:36 +00:00
John Crispin
fcbc21890c lantiq: DGN3500 cleanups
This patch builds on the previous three to streamline support for the
Netgear DGN3500.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 44032
2015-01-18 09:41:04 +00:00
John Crispin
c80b429fc1 lantiq: Fix initscript issue
Currently this initscript fails if the macaddr has any leading zeroes.
This patch corrects the problem.

Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>

SVN-Revision: 44029
2015-01-18 09:40:47 +00:00
John Crispin
7f77870c19 Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK
Add profile and userspace for P2812HNUF1/3, switch from UBI_GLUEBI to UBI_BLOCK

Signed-off-by: Sylwester Petela <sscapi@gmail.com>

SVN-Revision: 43987
2015-01-17 07:07:15 +00:00
John Crispin
c9a390f9e1 lantiq: BT Home Hub 3A - userspace
BT Home Hub 3A - userspace

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43879
2015-01-08 20:25:48 +00:00
John Crispin
1ba71cbc14 lantiq: Fix adsl led on Home Hub 2B
This fixes the adsl led on the Home Hub 2B.

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 43876
2015-01-08 20:25:28 +00:00
John Crispin
4b5c23e1e3 lantiq: vgv7519 - set some defaults for leds
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43256
2014-11-14 16:53:53 +00:00
John Crispin
901dddce31 lantiq: set default led configuration from /sys entry later, after per board settings
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43255
2014-11-14 16:53:48 +00:00
John Crispin
36e862da17 lantiq: vgv7519: fix board_config on dts, read mac address and set
Signed-off-by: Eddi De Pieri <eddi@depieri.net>

SVN-Revision: 43109
2014-10-29 20:50:40 +00:00
John Crispin
c085d07ee3 lantiq - vgv7519: load rt5362 eeprom from bootloader param patition
SVN-Revision: 42824
2014-10-06 20:08:30 +00:00
John Crispin
944820584a Lantiq: fix build warning from dsl_fs script
fix inclusion of functions.sh in dsl_fs init script

without this, the following error is seen during build:
./etc/init.d/dsl_fs: line 4: /lib/functions.sh: No such file or directory

Signed-off-by: Thomas Langer <thomas.langer@lantiq.com>

SVN-Revision: 42575
2014-09-16 14:53:06 +00:00
John Crispin
f16f310306 lantiq: add default switch setup to td8970
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 42544
2014-09-15 10:18:37 +00:00
John Crispin
5f71dbb005 lantiq: improve ARV7519RW22 support
- use full board name
- rename uboot-env partition
- add dsl_fw partition
- remove unneeded pinmux groups
- move gigabit ethernet to LAN
- load mac address from mtd

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>

SVN-Revision: 42180
2014-08-18 13:08:56 +00:00
John Crispin
e2915c6981 lantiq: add support for /tmp/sysinfo
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41472
2014-07-02 16:33:11 +00:00
Felix Fietkau
6142d061b5 lantiq: support loading the dsl firmware from a flash partition as a raw gzipped tarfile
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 40715
2014-05-06 21:06:22 +00:00
John Crispin
390e856cb2 lantiq: more vdsl related cleanups
* atm module needs to be loaded before linux-atm
* use absolute firmware paths
* extended validation
* add a script for mounting an optional firmware partition

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40460
2014-04-11 20:40:24 +00:00
John Crispin
eebc673f1e lantiq: move the dsl-modem config to network.@dsl-modem[-1]
make sure uci_defaults generates a proper uci config for the v/adsl modem

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40439
2014-04-10 08:14:33 +00:00
John Crispin
15139d468c lantiq: BT Home Hub 2B support - userspace
Basic userspace configuration for BT Home Hub 2B

Signed-off-by: Ben Mulvihill <ben.mulvihill@gmail.com>

SVN-Revision: 40371
2014-04-03 14:26:58 +00:00
John Crispin
e36568e74b lntiq: add support for Astoria ARV7519RW.
These patches add support for the Astoria ARV7519RW aka Livebox 2.1
The PCI and PCIe interfaces have been disabled. Also, because there are
two revisions of this board with different GPHY firmwares, two targets
were defined.
V2: rewrote partitions to work with an u-boot specifically made for
these boards.

Signed off by: Esteban Benito <estebanjbs@gmail.com>
Signed off by: Carles Gadea <carlesgrg@gmail.com>
Tested by: José Vázquez Fernández <ppvazquezfer@gmail.com>

SVN-Revision: 40329
2014-03-30 10:02:30 +00:00
John Crispin
42e8cb6388 lantiq: do an endianness swap to the RT2860 eeprom for ARV752DPW(22)
ARV7510PW22, ARV752DPW and ARV752DPW22 have the RT2860 eeprom stored in
flash as big-endian, but the driver needs it in little-endian format. We
have to swab it before handing it over. This requires my earlier patch
for busybox.

Funnily enough, ARV752DPW works also with the incorrect eeprom, but
undoubtedly unoptimally. I have a hunch that also the final remaining
Lantiq board would require this swabbing, but I'm not sure, so I just
swab it in the three boards that I know about.

v2:
* Swab also on ARV7510PW22 based on feedback from Alvaro Rojas
* Fix the offset with bs=2

Signed-off-by: Matti Laakso <malaakso at elisanet.fi>

SVN-Revision: 40328
2014-03-30 09:16:52 +00:00
John Crispin
5a6268c078 lantiq: add esi
http://patchwork.openwrt.org/patch/3703/

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 40326
2014-03-30 09:16:43 +00:00
John Crispin
112059073e lantiq: fix initial VLAN conf for P2601HNFX
Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40321
2014-03-30 09:16:23 +00:00
John Crispin
e733242a23 lantiq: add support for Arcadyan ARV7519PW
This patch adds almost full support for this board.

- WiFi is still not working
- USB will not power up. According to some reports, it may be a passive port

Signed-off-by: Antonios Vamporakis <ant@area128.com>

SVN-Revision: 40319
2014-03-30 09:16:15 +00:00
John Crispin
9531390aad lantiq: add support for ZyXEL P2812HNUFX
This patch adds almost full support for this board. WiFi is still not working.
The FXS ports are not functional due to missing support for the TAPI driver on
VR9 SoC.

Signed-off-by: Antonios Vamporakis <ant@area128.com>
Tested-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 40317
2014-03-30 09:16:06 +00:00