Commit graph

34915 commits

Author SHA1 Message Date
Daniel Gimpelevich
492964e741 lantiq: Use correct macaddr generating logic for the DGN3500
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2016-05-27 16:08:47 +02:00
Daniel Gimpelevich
8b321d45be lantiq: Fix macaddr-setting code on DGN3500 and possibly other devices
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2016-05-27 16:08:47 +02:00
Daniel Gimpelevich
96ad827e17 lantiq: fix segfault inside ltq-adsl-app
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2016-05-27 16:08:47 +02:00
Daniel Gimpelevich
8333a6d0ba lantiq: Reduce ugliness of ugly hack
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2016-05-27 16:08:47 +02:00
Daniel Gimpelevich
e8780b643b lantiq: Use the correct SPI flash speed for the Netgear DGN3500
Signed-off-by: Daniel Gimpelevich <daniel@gimpelevich.san-francisco.ca.us>
2016-05-27 16:08:47 +02:00
Alexander Couzens
8241479605 tools/tplink-safeloader: split CPE210 from CPE510 profile
The CPE210 was still described for the OEM upgrade as compatible,
even the wireless configuration isn't compatible anymore between
both series (2ghz and 5ghz).
Update the CPE210 image profile to use the new profile.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-05-27 15:55:13 +02:00
Alexander Couzens
b7864453f6 ar71xx: switch ordering and template to improve readability
The CPE210's ancestor is the CPE510 not the other way around. The device
profile is also named after the CPE510.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
2016-05-27 15:55:06 +02:00
Joseph C. Lehner
b232669d45 ramips: fix Netgear EX2700 images
The bootloader on this device expects the kernel partition to end
on a 64k boundary. The last 64 byte of the kernel partition must
contain a valid uImage header (the fakeroot partition).

Signed-off-by: Joseph C. Lehner <joseph.c.lehner@gmail.com>
2016-05-27 15:50:18 +02:00
Ash Benz
d517d8691a kernel/mtd: Add support for Macronix mx25u25635f, used in C2600 v1.1
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:18 +02:00
Ash Benz
867c0cb237 kernel/mac80211: skip ath10k OTP check if caldata found
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ash Benz
cd36d71655 ipq806x/dts: Add Archer C2600 DTS
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ash Benz
7d963efc40 ipq806x/base-files: extract ath10k caldata
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ash Benz
14515cc271 ipq806x/base-files: Add support for Archer C2600
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ash Benz
98b50f0bef ipq806x/base-files: Add Archer C2600 LEDs and board
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ash Benz
ef02e8967c ipq806x: Add Archer C2600 to image/Makefile
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ram Chandra Jangir
5e49c57956 ipq806x: Add support for linux-4.4
1)Changes

- Rebased the patches for linux-4.4.7
- Added patch to fix spi nor fifo and dma support
- Added patch to configure watchdog barktime

2)Testing

Tested on IPQ AP148 Board:
 a. NOR boot and NAND boot
 b. ethernet network and ath10k wifi
 c. ubi sysupgrade

UnTested
 dwc3 usb has not been validated on IPQ board(AP148)

3)Known Issues:
 Once we flash ubi image on AP148, and if we reset the board, uboot on
 first boot creates PEB and LEB for dynamic sized partitions, which is incorrect
 and not what linux expects which causes errors when trying to mount rootfs.
 In order to test this, we can use the below steps:
  a. Flash the ubi image on board and don't reset the board
  b. load the kernel fit image in RAM and boot from there.

Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
2016-05-27 15:50:17 +02:00
Ash Benz
955c341d3b fw-utils/tplink-safeloader.c: Add support for Archer C2600
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ash Benz
7eb1a7e956 include/image.mk: move build step tplink-safeloader to image.mk
Move tplink-safeloader from target/linux/ar71xx/image/tp-link.mk to include/image.mk

Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Alexey Brodkin
0c920e3281 toolchain: uClibc: Bump to the most recent version 1.0.14
This change updates uClibc version to the most recent 1.0.14 release.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
2016-05-27 15:50:17 +02:00
Mathias Kresin
b2b917cd06 lantiq: do not build images which exceed the flash size
The user benpicco in #openwrt reported that images are build which are
bigger that the available flash size.

He provided a proof of concept fix and gave permission to me to send it
for inclusion.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
c065cb08db uboot-lantiq: VGV7510KW22 - remove NOR SPL leftovers
Missed this one with my last cleanup patch.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
db66b157db lantiq: VGV7510KW22 - enable the IP101A phy
The RJ45 WAN port is used for xDSL as well as the IP101A.

The pins 1,2,3,6 of the RJ45 are connected to the IP101A and the
pins 4,5 are connected to the xdsl chip.

Drop the ip101a-rst node. It can't be controlled and is not required
at all.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
4d5db712e3 lantiq: VGV7510KW22 - fix pinmux configuration
The STP pinmux was initially added in assumption LAN2 led is driven by
it. It worked somehow because STP group and gphy0 led0 share the GPIO.
Do it the right way by adding the gphy0 led0 the gphy function.

According to the author, the SPI node is a copy & paste leftover. Which
makes sense since nothing is connected to the SPI bus on this device.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
b0a202ebdc uboot-lantiq: Add Arcadyan VGV7519 support
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.

Major cleanup and addition of brnboot second stage u-boot was done by
me.

The second stage brnboot u-boot is untested, since the brnboot prompt
is secured by a still unknown password. But should work.

The former ram values are replaced with the ram values extracted from
the original brnboot. The old ones didn't worked with the ramboot
image.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
ecf10d3796 uboot-lantiq: vrx200 - lzma compress gphy firmware
The default bootloader partition of some devices is to small for an
u-boot with uncompressed gphy firmware(s).

Instead of increasing the bootloader partition size, in compare to the
stock firmware, compress the firmware. This would allow the bootloader
of at least the FritzBox 3370 as well as the bootloader of the
VGV7510KW22 to fit into the bootloader partition of the stock firmware.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
8df4eb0b9b uboot-lantiq: vrx200 - add support for dual nor flash
Based on a submission to the uboot-lantiq repo by Eddi De Pieri.

Devices like the xrx200 Arcadyan VGV7519 are using two NOR flash chips.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
a9f7586ad2 lantiq: VGV7519 - fix brn partition layout
Use the brnboot partition layout as it is listed in the OpenWrt wiki
article for this board.

Configure the brnboot root selector for this device as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
28faa3f292 lantiq: VGV7519 - get mac address from board_config partition
Use the mac address stored in the board_config partition instead of a
static one.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:17 +02:00
Mathias Kresin
1e395608cc lantiq: VGV7519 - add vlan support
Add the lantiq,switch property to enable vlans and setup them up.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:16 +02:00
Mathias Kresin
1deab53d88 lantiq: VGV7519 - add second usb port
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:16 +02:00
Mathias Kresin
79d92bb7ac lantiq: VGV7519 - cleanup pinmux configuration
Cleanup the pinmux configuration by removing the unused spi node. Nothing is connected to the SPI bus on devices.

The stp_out pinmux child node covers the same GPIOs as the already used
stp group.

The same applies to the gphy-leds_out pinmux node and the "gphy0
led1" as well as "gphy1 led0" groups.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:16 +02:00
Mathias Kresin
8a382f1221 lantiq: VGV7519 - remove/merge redundant parts in dts
Signed-off-by: Mathias Kresin <dev@kresin.me>
2016-05-27 15:50:16 +02:00
Mohammed Berdai
f778cdd9c9 lantiq: fix ARV4518PWR01 network
This patch fixes the missing Lan interface config in the file
/etc/config/network for ARV4518PWR01/A which results in eth0 and br-lan
being down and therefore no way to access the router unless via UART-TTL.

Signed-off-by: Mohammed Berdai <mohammed.berdai@gmail.com>
2016-05-27 15:50:16 +02:00
Rafał Miłecki
cdff540623 mac80211: brcmfmac: return -ENFILE if interface exists
This makes brcmfmac compatible with mac80211 which uses dev_alloc_name
(and so returns -ENFILE on error).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
2016-05-30 08:25:44 +02:00
Rafał Miłecki
efcaa046b7 mac80211: change default SSID from Lede to LEDE
LEDE project seems to be using "LEDE" as its acronym everywhere. To keep
things consistent adjust default wireless SSID.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: John Crispin <john@phrozen.org>
Acked-by: Alexander Couzens <lynxis@fe80.eu>
2016-05-29 16:22:47 +02:00
Álvaro Fernández Rojas
2a57a54d49 ramips: add backported MT7628 pinmux fixes
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2016-05-29 11:26:41 +02:00
Daniel Engberg
8372a7f922 download.pl: Rework URLs
Provide HTTPS URL when possible, try to keep 8 mirrors per entry and spread
over several locations of the world. Since most active contributors are in
US/CA and/or EU prioritize mirrors that are within those regions if possible.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-05-28 09:14:55 +02:00
Jo-Philipp Wich
c4879556fe kernel: fix dependency chain of kmod-igb
The igb kmods selects kmod-i2c-algo-bit which in turn is invisible until
kmod-i2c-core gets selected, causing kmod-igb to be hidden from menuconfig
as well.

Let kmod-igb select kmod-i2c-core as well in order to make it visible
in menuconfig right away.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-28 09:14:55 +02:00
Dirk Neukirchen
6c1eb4441e util-linux: fix breakage
- install correct libs to staging/usr/lib
fixes eudev, nfs-kernel-server

the lib*.a seem broken - use the correct .so files
and remove .a libs

- some build breakage was observed with parallel builds:
text-utils/more-more.o: In function `putstring':
more.c:(.text+0x1f4): undefined reference to `tputs'
text-utils/more-more.o: In function `initterm':
more.c:(.text+0x1b74): undefined reference to `setupterm'
more.c:(.text+0x1f0c): undefined reference to `tparm'
more.c:(.text+0x20ac): undefined reference to `tigetnum'
more.c:(.text+0x20c8): undefined reference to `tigetflag'
more.c:(.text+0x20ec): undefined reference to `tigetstr'
more.c:(.text+0x2148): undefined reference to `PC'
text-utils/more-more.o: In function `reset_tty':
more.c:(.text+0x2630): undefined reference to `tputs'

- fix line length

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
2016-05-28 09:14:55 +02:00
Jo-Philipp Wich
7f69458296 base-files: rework postinstall uci-defaults handling
Some package postinstall operations, e.g. those emitted by the LuCI build
system, source and delete the uci-defaults themselves upon package insteall,
causing the generic defaults apply code to trigger shell errors like:

    .../luci-app-ddns.postinst: .: line 130: can't open './40_luci-ddns'

Rework the generic apply code to check the existence of the uci-defaults
script before trying to source it, use sed to prefilter the list of entries
from the control file and perform the directory change in a subshell,
avoiding the need for cd $OLDPWD.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-27 10:27:45 +02:00
Dirk Neukirchen
749d4b77bd util-linux: fix sfdisk
reported by reproducible openwrt project[1]:
we package some libtool shell script

- add missing dependencies
- fix paths
- make in InstallDev does not seem to be necessary

tested (cal,dmesg,sfdisk) on x86 qemu VM with allyesconfig

[1]: https://reproducible.debian.net/openwrt/openwrt.html

[Jo-Philipp Wich: fix double slash in sfdisk path, reword commit message]

Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-27 10:27:45 +02:00
Cezary Jackiewicz
71e0ef3978 ar71xx: add GPIO pin for usb power switch for RouterBOARD 912
RB912 has one usb shared between external USB and miniPCIe slot. GPIO52 can
reroute power to external USB (=1) or internal miniPCIe slot (=0)

Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl>
2016-05-27 10:27:44 +02:00
John Crispin
7d67f79cb5 mediatek: more mtd fixes
this fixes full builds when ALL_KMODS is selected

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-25 04:42:54 +02:00
John Crispin
a42e84b2db lantiq: fix regression in VG3503J.dts
9d0608eef3 - "lantiq: VG3503J - merge profiles"

resulted in the dts file missing the version string.

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-24 17:17:36 +02:00
Alexey Brodkin
dc44b2bd62 procd: Update to latest head
This includes a fix for building against uClibc:
http://git.openwrt.org/?p=project/procd.git;a=commit;h=9a6f83d3c168523ac7b898ae481c2fd8c501d6a6

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: John Crispin <john@phrozen.org>
2016-05-24 17:03:02 +02:00
John Crispin
1eac53ba92 mediatek: update mtd backport
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-24 17:01:59 +02:00
Jo-Philipp Wich
4ed8e57fd9 sdk: remove redundant symbol declaration
Commit d79f8909c1 introduced CONFIG_ALL,
CONFIG_ALL_KMODS and CONFIG_ALL_NONSHARED as menuconfig choices to the SDK,
therefor we can drop the hardcoded CONFIG_ALL symbol declaration now.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-24 23:40:50 +02:00
Jo-Philipp Wich
9eeb267c06 sdk: stop shipping a .config
Now that the most important options are exposed via menuconfig in the SDK we
can stop shipping a (possibly outdated) copy of .config from the emitting
buildroot.

Leaving out .config has two positive side effects:

 - A simple "make" run without any prior config will launch menuconfig, forcing
   interactive users to make appropriate choices

 - Buildbot systems (e.g. our phase2 builder) can issue a "make defconfig" to
   obtain a .config enabling all packages by default

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-05-24 23:40:34 +02:00
Daniel Engberg
32ae0da2b7 iproute2: Use URL alias
Remove hardcoded URLs and use alias instead.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-05-24 19:42:49 +02:00
Daniel Engberg
6e7403e1e6 iw: Use URL alias
Remove hardcoded URL and use alias instead.

Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
2016-05-24 19:41:52 +02:00