Commit graph

8460 commits

Author SHA1 Message Date
Felix Fietkau
6f89cffc9a kernel: add a few patches for avoiding unnecessary skb reallocations - significantly improves ethernet<->wireless performance with mac80211 based drivers
SVN-Revision: 31886
2012-05-27 14:43:58 +00:00
Jonas Gorski
ec7786c2ec bcm63xx: build images for DSL-274XB revision F1
Build images for D-Link DSL-274XB revision F1. Flashing
through original web UI as well as CFE works.

Known issues:
  * wifi led inverted (on when wifi is off and vice cersa)
  * same issues as generic bcm6328 support

SVN-Revision: 31885
2012-05-27 13:22:51 +00:00
Jonas Gorski
8aac009cc9 bcm63xx: add ath9k to atheros wifi profile
SVN-Revision: 31884
2012-05-27 13:22:48 +00:00
Jonas Gorski
4aa43122ab bcm63xx: enable bcm6328 support and required drivers
BCM6328 support is in a usable state, with the following issues

 * internal switch port not configurable
 * external phys not supported
 * broadcom wifis will probably not work correctly
 * and all other generic bcm63xx issues (so yes, still no ADSL)

SVN-Revision: 31883
2012-05-27 13:22:46 +00:00
Jonas Gorski
e5575fe335 bcm63xx: add support for DSL-274XB rev F1
SVN-Revision: 31882
2012-05-27 13:22:43 +00:00
Jonas Gorski
a7a82db16f bcm63xx: fix port state after network down
bcm_enetsw_probe did not properly reset port states, resulting in
connected ports staying disabled after bringing up the interface the
second time.

SVN-Revision: 31881
2012-05-27 13:22:40 +00:00
Jonas Gorski
e19ed52fd1 bcm63xx: add a fixup for ath9k devices
SVN-Revision: 31880
2012-05-27 13:22:37 +00:00
Jonas Gorski
e34018cc9e bcm63xx: add support for the HSSPI controller
Add support for the HSSPI controller found on bcm6328 and SPI attached
flash.

SVN-Revision: 31879
2012-05-27 13:22:33 +00:00
Jonas Gorski
099d5eec06 bcm63xx: add preliminary support for bcm6328
SVN-Revision: 31878
2012-05-27 13:22:29 +00:00
Jonas Gorski
7dbb132c88 bcm63xx: add flash type detection
SVN-Revision: 31877
2012-05-27 13:22:25 +00:00
Jonas Gorski
b0ffeb0021 bcm63xx: pad Speedport W303 V images to 4 MiB
Prevents CFE from flashing to the second image offset. Fix up the rootfs
length on first boot else CFE will complain.

SVN-Revision: 31876
2012-05-27 13:22:22 +00:00
Jonas Gorski
226b030e44 bcm63xx: add a default switch configuration for DSL-274XB
SVN-Revision: 31874
2012-05-27 13:22:17 +00:00
Jonas Gorski
db1ff5c6fa bcm63xx: setup network config through uci-defaults
SVN-Revision: 31873
2012-05-27 13:22:14 +00:00
Jonas Gorski
72b4fdecc9 bcm63xx: move the board name workaround to /lib/brcm63xx.sh
SVN-Revision: 31872
2012-05-27 13:22:11 +00:00
Jonas Gorski
dd37687de0 bcm63xx: use the exact board id as board identification string
No need to keep the bcm63xx/ at the start or the chipid info at the end.

SVN-Revision: 31871
2012-05-27 13:22:08 +00:00
Felix Fietkau
230c0eb2cb kernel: fix a warning in the connmark module
SVN-Revision: 31856
2012-05-24 18:25:08 +00:00
Gabor Juhos
2ae5581447 kernel: update linux 3.3 to 3.3.7
SVN-Revision: 31848
2012-05-23 21:05:32 +00:00
Gabor Juhos
c57409e79d ar71xx: fix an insignificant typo
Patch from #11485.

SVN-Revision: 31847
2012-05-23 21:05:30 +00:00
Gabor Juhos
013f434f5b ar71xx: fix WLAN led for RB751U-2HnD and RB751G-2HnD
Patch by Kamil Trzciński <ayufan@osk-net.pl>

SVN-Revision: 31846
2012-05-23 21:05:25 +00:00
Gabor Juhos
758f670376 ar71xx: add support for TP-Link TL-MR3040
Support for TP-Link TL-MR3040. Power LED not working - always on red, after
start should be green.

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 31845
2012-05-23 21:05:24 +00:00
Gabor Juhos
e4720dfa95 ramips: Add byte queue limits support to net/ethernet/ramips_main.c
Add byte queue limits support to net/ethernet/ramips_main.c

"Byte queue limits are a mechanism to limit the size of the transmit
hardware queue on a NIC by number of bytes. The goal of these byte
limits is too reduce latency (HOL blocking) caused by excessive
queuing in hardware (aka buffer bloat) without sacrificing
throughput."

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31844
2012-05-23 21:05:23 +00:00
Gabor Juhos
1d286fd755 ramips: Enable sysupgrade for Sitecom WL-351
Sysupgrade works just fine on my Sitecom WL-351 after adding this
oneliner.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>

SVN-Revision: 31843
2012-05-23 21:05:22 +00:00
Gabor Juhos
1e1c0a5405 linux/3.3: avoid recursive calling of mtd_writev in the block2mtd driver
Should fix #11513. Tested with the x86/generic squashfs image within a VM.

SVN-Revision: 31841
2012-05-23 21:05:19 +00:00
Felix Fietkau
9037c2ccc6 lantiq: allow platforms with rt2x00 to override the mac address without overriding eeprom, fixes bogus wlan mac address on arv4520
SVN-Revision: 31835
2012-05-20 21:58:03 +00:00
Felix Fietkau
ce59af117c kernel: merge a net-next fq_codel backlog handling fix
SVN-Revision: 31813
2012-05-18 22:12:15 +00:00
Gabor Juhos
02c2f449d7 omap24xx: add support for 3.3
Compile tested only.

SVN-Revision: 31810
2012-05-18 20:22:32 +00:00
Gabor Juhos
c2a2d59db5 cns3xxx: add support for 3.3
Compile tested only.

SVN-Revision: 31809
2012-05-18 20:10:53 +00:00
Gabor Juhos
1fd4bf270b linux/2.6.39: R.I.P.
SVN-Revision: 31808
2012-05-18 20:10:51 +00:00
Gabor Juhos
05c0d8b28e cns3xxx: sync kernel config
SVN-Revision: 31807
2012-05-18 20:10:48 +00:00
Gabor Juhos
9718f03e24 cns3xxx: remove 2.6.39 support
SVN-Revision: 31806
2012-05-18 20:10:46 +00:00
Gabor Juhos
9e78becbac cns3xxx: switch to 3.1
Compile tested only.

SVN-Revision: 31805
2012-05-18 20:10:44 +00:00
Gabor Juhos
07b5a3eea2 x86: remove support for old kernels
SVN-Revision: 31804
2012-05-18 20:10:42 +00:00
Gabor Juhos
604e3aac0a x86: remove subtarget specific LINUX_VERSION overrides
SVN-Revision: 31803
2012-05-18 20:10:38 +00:00
Gabor Juhos
d9dab97d38 x86/ep80579: switch to 3.3
Also fix build errors in the ep80579-drivers package.
Compile tested only.

SVN-Revision: 31802
2012-05-18 20:10:33 +00:00
Hauke Mehrtens
c63ef04874 brcm47xx: fix nvram read out on devices with serial flash
detect nvram on Linksys E3200

SVN-Revision: 31790
2012-05-18 16:04:10 +00:00
Hauke Mehrtens
7ad663dda6 brcm47xx: bcma: fix null pointer
SVN-Revision: 31789
2012-05-18 15:46:30 +00:00
Hauke Mehrtens
b4ecf522cd brcm47xx: ssb: recognize ARM Cortex M3
SVN-Revision: 31788
2012-05-18 15:45:51 +00:00
Hauke Mehrtens
7be88d2ad8 brcm47xx: some fixes for the USB driver
SVN-Revision: 31787
2012-05-18 15:44:25 +00:00
Gabor Juhos
e3678eb33e cobalt: remove 2.6.39 specific patches
SVN-Revision: 31785
2012-05-18 09:59:22 +00:00
Gabor Juhos
a5de52c244 x86/olpc: switch to 3.3
Compile tested only.

SVN-Revision: 31784
2012-05-18 09:57:32 +00:00
Gabor Juhos
9e54e012d6 x86: image: select bootscript images by default for OLPC
SVN-Revision: 31783
2012-05-18 09:57:29 +00:00
Felix Fietkau
3f62f5211a adm5120: add missing config symbols for the rb1xx subtarget, fixes #11407
SVN-Revision: 31781
2012-05-17 21:20:23 +00:00
Felix Fietkau
03babf3641 target: add a feature flag for RTC support
SVN-Revision: 31777
2012-05-17 15:28:09 +00:00
Hauke Mehrtens
c30405070c kernel: add some missing config options added by r31756
SVN-Revision: 31774
2012-05-17 13:28:30 +00:00
Hauke Mehrtens
273797f15a kernel: ssb/bcma: update to version from wireless-testing tag master-2012-05-16-2
SVN-Revision: 31772
2012-05-17 13:22:38 +00:00
Hauke Mehrtens
3491d8c017 brcm47xx: remove support for kernel 3.2
SVN-Revision: 31771
2012-05-17 13:20:10 +00:00
Gabor Juhos
562e468ae5 x86/thincan: switch to 3.3
Compile tested only.

SVN-Revision: 31765
2012-05-17 06:41:01 +00:00
Gabor Juhos
1f7f8376a6 x86/xen_domu: switch to 3.3
Compile tested only.

SVN-Revision: 31764
2012-05-17 06:41:00 +00:00
Gabor Juhos
8bb7ddecfd x86/kvm_guest: switch to 3.3
Compile tested only.

SVN-Revision: 31763
2012-05-17 06:40:58 +00:00
Gabor Juhos
f14d1a588d x86/generic: switch to 3.3
Compile tested only.

SVN-Revision: 31762
2012-05-17 06:40:56 +00:00
Felix Fietkau
54edbfabac kernel: add codel and fq_codel to generic 3.3 patch set (based on patch by Dave Täht)
Codel is a new AQM algorithm and RED replacement designed by
Kathie Nichols and Van Jacobson, and published in ACM queue:

http://queue.acm.org/detail.cfm?id=2209336

Codel stands for "Controlled Delay", and needs no knobs in the
general case, twiddled, for optimum results. It aims for 5ms of
delay, at most, when in use.

Additionally,

fq_codel (by eric dumazet) builds on codel to provide fair queuing
superior to what could be had with SFQ, and drop behavior saner
than RED, BLUE, or choke.

These patches are backported from net-next and are known to work
on Linux 3.3.4 and later.

Includes updates to codel for better portability and speed

SVN-Revision: 31756
2012-05-16 15:23:03 +00:00
Gabor Juhos
eb2fe5e863 x86/alix2: switch to 3.3
Compile tested only.

SVN-Revision: 31753
2012-05-16 10:45:02 +00:00
Gabor Juhos
fb7da5bbde x86/net5501: switch to 3.3
Compile tested only.

SVN-Revision: 31752
2012-05-16 10:44:59 +00:00
Gabor Juhos
9e049ce25c x86: sync 3.3 configs
SVN-Revision: 31751
2012-05-16 10:44:55 +00:00
Gabor Juhos
19f691f8e4 x86: sync 3.2 configs
SVN-Revision: 31750
2012-05-16 10:44:52 +00:00
Gabor Juhos
724fd5e657 x86: sync 2.6.39 configs
SVN-Revision: 31749
2012-05-16 10:44:49 +00:00
Gabor Juhos
637fd23428 linux/3.3: add missing symbol
SVN-Revision: 31748
2012-05-16 10:44:46 +00:00
Gabor Juhos
67675fd48d linux: add CONFIG_POWER_SUPPLY_DEBUG symbol
It was missing in the previous commit.

SVN-Revision: 31738
2012-05-15 11:12:31 +00:00
Gabor Juhos
39994008cb linux: move certain disabled symbols to the generic configs
* CONFIG_ARCH_DMA_ADDR_T_64BIT
  * CONFIG_ARCH_HAS_ILOG2_U32
  * CONFIG_ARCH_HAS_ILOG2_U64
  * CONFIG_ARCH_PHYS_ADDR_T_64BIT
  * CONFIG_ARCH_SUPPORTS_MSI
  * CONFIG_GENERIC_CPU_DEVICES
  * CONFIG_HWMON_DEBUG_CHIP
  * CONFIG_I2C_PXA_PCI
  * CONFIG_LEDS_GPIO
  * CONFIG_MINIX_FS_NATIVE_ENDIAN
  * CONFIG_MLX4_CORE
  * CONFIG_POWER_SUPPLY
  * CONFIG_POWER_SUPPLY_DEBUG
  * CONFIG_QUOTACTL
  * CONFIG_SDIO_UART
  * CONFIG_SENSORS_K10TEMP
  * CONFIG_SENSORS_SCH56XX_COMMON
  * CONFIG_SENSORS_VIA_CPUTEMP
  * CONFIG_SERIO_AMBAKMI
  * CONFIG_SERIO_I8042
  * CONFIG_SERIO_LIBPS2
  * CONFIG_SERIO_PCIPS2
  * CONFIG_SERIO_RAW
  * CONFIG_SERIO_SERPORT
  * CONFIG_SPI_BITBANG
  * CONFIG_SPI_GPIO

SVN-Revision: 31737
2012-05-15 10:58:52 +00:00
Felix Fietkau
a3f2fd187b ar71xx: remove AG71XX_RX_PKT_RESERVE, it is no longer necessary (found by Eric Dumazet)
SVN-Revision: 31736
2012-05-15 10:36:39 +00:00
John Crispin
364f47e454 code style cleanup of the mach files
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31735
2012-05-15 09:38:05 +00:00
John Crispin
07dca108a9 adds zyxel p2601hnfx support
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31734
2012-05-15 09:38:02 +00:00
John Crispin
9785ec070e set 3.3.6 as default
SVN-Revision: 31733
2012-05-15 09:37:59 +00:00
John Crispin
c61ada1db8 set 3.3.5 as default
SVN-Revision: 31718
2012-05-14 16:11:26 +00:00
Gabor Juhos
2fceae7ec4 linux/3.0: R.I.P.
It is used by the broken omap35xx/gumstix target only.

SVN-Revision: 31717
2012-05-14 15:48:34 +00:00
Gabor Juhos
a3d349a3b3 realview: remove 3.0 support
SVN-Revision: 31716
2012-05-14 15:48:32 +00:00
Gabor Juhos
e2ecabd761 realview: switch to 3.3
SVN-Revision: 31715
2012-05-14 15:48:31 +00:00
Gabor Juhos
46c7d58726 realview: add 3.3 support
SVN-Revision: 31714
2012-05-14 15:48:29 +00:00
Gabor Juhos
8f629f2a22 linux/3.3: more missing config symbols
SVN-Revision: 31713
2012-05-14 15:48:23 +00:00
Felix Fietkau
fab5ee9566 imagebuilder: explicitly install the kernel .ipk before installing anything else, it is no longer part of the package index (fixes #11450)
SVN-Revision: 31711
2012-05-14 14:00:01 +00:00
Hauke Mehrtens
a798a81890 kernel: add CONFIG_BLK_DEV_PCIESSD_MTIP32XX
SVN-Revision: 31710
2012-05-14 11:28:02 +00:00
Gabor Juhos
b472e5d12e kernel: update linux 3.3 to 3.3.6
SVN-Revision: 31709
2012-05-14 09:18:32 +00:00
Hauke Mehrtens
679b6a0722 amazon: fix section mismatch
SVN-Revision: 31707
2012-05-13 15:31:42 +00:00
Hauke Mehrtens
abd74f86b4 amazon: update amazon target to kernel 3.3
This is just compile tested, my device is currently not working.

SVN-Revision: 31706
2012-05-13 15:10:40 +00:00
Gabor Juhos
60d3ffb49a gemini: remove 2.6.37 support
SVN-Revision: 31700
2012-05-13 12:04:04 +00:00
Gabor Juhos
672ff3de6e gemini: switch to 3.3
SVN-Revision: 31699
2012-05-13 12:04:02 +00:00
Gabor Juhos
d0ac4c1f03 gemini: add support for 3.3
SVN-Revision: 31698
2012-05-13 12:03:59 +00:00
Hauke Mehrtens
482b99a660 brcm47xx: generate image for Linksys WRT610N V1
SVN-Revision: 31696
2012-05-13 00:16:57 +00:00
Hauke Mehrtens
31c2c485c1 kernel: ssb: add PCI IDs 0x4322 and 43222
The 0x4322 ID is found on the BCM4322 used on some SoCs like the
Linksys WRT610N V1 connected to a BCM4705. The 43222 (0xa8d6) ID
is found on the BCM43222 used on some other SoCs like the D-Link
DSL-2760U connected to a BCM63xx.

This fixes #10887.

SVN-Revision: 31695
2012-05-13 00:08:12 +00:00
Hauke Mehrtens
5acb0b72be brcm47xx: fix tg3 ssb patch
Now tg3 works with the Ethernet core of the Linksys WRT610N v1 (again).

SVN-Revision: 31694
2012-05-12 23:59:12 +00:00
Gabor Juhos
e710aeeab1 linux/2.6.38: R.I.P.
It is used only by the broken coldfire target.

SVN-Revision: 31688
2012-05-12 12:05:21 +00:00
Gabor Juhos
08ed044595 linux/2.6.37: R.I.P.
SVN-Revision: 31687
2012-05-12 12:05:19 +00:00
Gabor Juhos
c8cede6aa7 linux: add broken flag to remaining targets which are using 2.6.37
SVN-Revision: 31686
2012-05-12 12:05:18 +00:00
Gabor Juhos
a2efef024e iop32x: remove 2.6.37 support
SVN-Revision: 31685
2012-05-12 10:49:36 +00:00
Gabor Juhos
a5d4de7da2 iop32x: switch to 3.3
It is compile tested only, so add a broken flag.

SVN-Revision: 31684
2012-05-12 10:49:34 +00:00
Gabor Juhos
598fe0e93b iop32x: add 3.3 support
SVN-Revision: 31683
2012-05-12 10:49:32 +00:00
Gabor Juhos
bf8e96712e sibyte: remove 2.6.37 support
SVN-Revision: 31682
2012-05-12 10:49:30 +00:00
Gabor Juhos
edb129bb24 sibyte: switch to 3.3
It is compile tested only, so add a broken flag.

SVN-Revision: 31681
2012-05-12 10:49:28 +00:00
Gabor Juhos
fd651daa4b sibyte: add 3.3 support
SVN-Revision: 31680
2012-05-12 10:49:26 +00:00
Gabor Juhos
4f6acae5f7 ixp4xx: fix ixp4xx_crypto build error
SVN-Revision: 31679
2012-05-12 10:49:23 +00:00
Gabor Juhos
cabfa5b364 orion: remove the broken broken flag
It is working on the Linksys WRT350N v2 at least:
http://pastebin.com/KCAbJZs9

Additionally, the flag was added to a wrong place
so it had no effect.

Thanks to StrikerNL for testing.

SVN-Revision: 31674
2012-05-10 20:20:43 +00:00
Gabor Juhos
ec27c35ebe kirkwood: fix Kconfig symbol for NSA-310
SVN-Revision: 31673
2012-05-09 16:16:52 +00:00
John Crispin
dc4cfd3a64 Add 3.3 config files
SVN-Revision: 31672
2012-05-09 12:52:24 +00:00
John Crispin
75827c538d Add missing 3.3 patches
SVN-Revision: 31671
2012-05-09 12:52:21 +00:00
John Crispin
7d638fbb2f Drop 2.6.32 support
SVN-Revision: 31670
2012-05-09 12:52:19 +00:00
Gabor Juhos
200227e0b4 kirkwood: add support for the ZyXEL NSA-310
SVN-Revision: 31669
2012-05-09 11:38:43 +00:00
Gabor Juhos
213cbf4297 kirkwood: add RaidSonic ICY BOX IB-NAS62x0 board support
Based on a patch by Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 31668
2012-05-09 11:38:41 +00:00
Gabor Juhos
d4876692c1 kirkwood: enable GPIO sysfs interface
SVN-Revision: 31667
2012-05-09 11:38:40 +00:00
Gabor Juhos
d1eed108bb kirkwood: nuke 2.6.37 support
SVN-Revision: 31666
2012-05-09 11:38:39 +00:00
Gabor Juhos
861b9b25e0 kirkwood: switch to 3.3
SVN-Revision: 31665
2012-05-09 11:38:37 +00:00