Commit graph

150 commits

Author SHA1 Message Date
Felix Fietkau
39a229ed4b ipq806x: enable ath10k firmware for 988x, 99x0 and 9984 by default
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-07-04 11:41:32 +02:00
Hauke Mehrtens
84d489f64f kernel: update to version 4.4.14
Changelog: https://cdn.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.4.14

Some manual changes to target/linux/generic/patches-4.4/610-
netfilter_match_bypass_default_checks.patch were needed.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
2016-06-26 18:20:37 +02:00
Adrian Panella
184087f4f1 ipq806x: enable ieee80211 phy hotplug and patch macaddress
Calibration data for QCA99x0 in this device has bogus macaddress.
The data cannot be modified directly, as it breaks checksum control.
Instead change the macaddress from phy add hotplug event.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-22 19:32:06 +02:00
Sven Eckelmann
776613eeba ipq806x: Fix typo in Qualcomm device names
Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>
2016-06-22 19:32:06 +02:00
Ben Whitten
b7baaaf782 kernel: Move append-dtb to common image-commands
This build step is used by various targets, move it to a common section.

Signed-off-by: Ben Whitten <ben.whitten@gmail.com>
2016-06-22 19:32:06 +02:00
Pavel Kubelun
823242185b ipq806x: add initial support for Netgear R7800
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-06-22 19:32:06 +02:00
Pavel Kubelun
9bf3ddcb2a ipq806x: move ath10k firmware selection into device profiles
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-06-22 19:32:06 +02:00
Pavel Kubelun
4cd67a4f21 ipq806x: move smb208 nodes into a regulator subnode
Signed-off-by: Pavel Kubelun <be.dissent@gmail.com>
2016-06-22 19:32:05 +02:00
Josh Bendavid
66ffd0ddf9 ipq806x: fix MAC_POWER_SEL switch configuration
Fixes instability/corruption on the ethernet interface connected to port0 on the switch.

Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
2016-06-20 11:45:44 +02:00
Adrian Panella
0ddcbee261 ipq806x: activate ATAG DTB mangle and EA8500 rootblock in dts
The command-line arguments provided by the boot loader will be
appended to a new device tree property: bootloader-args.
If there is a property "append-rootblock" in DT under /chosen
and a root= option in bootloaders command line it will be parsed
and added to DT bootargs with the form: <append-rootblock>XX.
Only command line ATAG will be processed, the rest of the ATAGs
sent by bootloader will be ignored.
This is usefull in dual boot systems, to get the current root partition
without afecting the rest of the system.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-17 04:13:07 +02:00
Jo-Philipp Wich
14e2f4f6d1 ipq806x: add missing kernel config symbol
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
2016-06-15 13:20:39 +02:00
Josh Bendavid
9361285a41 ipq806x: restore old stmmac dma patch which is still needed to fix data corruption
Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
2016-06-14 13:28:41 +02:00
Josh Bendavid
e13b6322cd Revert "ipq806x: add mangle bootargs options in config-4.4"
This reverts commit 53147c2237.

These config changes break booting on C2600 and probably other devices.

Signed-off-by: Josh Bendavid <joshbendavid@gmail.com>
2016-06-14 13:28:41 +02:00
John Crispin
8cc65914df ipq806x: move dts file to the files folder
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:42 +02:00
John Crispin
46cecfd6d7 ipg806x: set v4.4 as default
Signed-off-by: John Crispin <john@phrozen.org>
2016-06-13 22:51:42 +02:00
Adrian Panella
53147c2237 ipq806x: add mangle bootargs options in config-4.4
Add config options to manage dual boot partitions, using MANGLE BOOTARGS

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:42 +02:00
Adrian Panella
3d067c0132 ipq806x: base-files: add support for Linksys EA8500
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:42 +02:00
John Crispin
2adc6468bf ipq806x: build Linksys EA8500 images
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:42 +02:00
Adrian Panella
bdaf558134 ipq806x: qcom rpm fix support for smb208
In commit "regulator: qcom: Rework to single platform device" the smb208
regulator used in IPQ8064 was left out.

Add it to that new framework and update Docs and DT accordingly.

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:42 +02:00
John Crispin
928163bad2 uboot-envtools: add ipq806x support
Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-06-13 22:51:41 +02:00
Felix Fietkau
7eeb254cc4 treewide: replace nbd@openwrt.org with nbd@nbd.name
Signed-off-by: Felix Fietkau <nbd@nbd.name>
2016-06-07 08:58:42 +02:00
Signed-off-by: Henryk Heisig
8ee30ade17 ipq806x: add diag.sh script
Signed-off-by: Henryk Heisig <hyniu@o2.pl>
2016-06-05 23:23:57 +02:00
John Crispin
9dafab92bf ipq806x: add a default profile
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-31 01:39:31 +02:00
John Crispin
1e152483de ipq806x: enable PM support
this fixes build errors with latest mac80211

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-31 01:39:31 +02:00
John Crispin
0fa01e25ed ipq806x: remove accidentially comitted file
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-30 22:51:14 +02:00
John Crispin
21802f22f0 ipq806x: fix 3.18 support
accidentially removed the files in the v4.4 commit

Signed-off-by: John Crispin <john@phrozen.org>
2016-05-27 22:28:15 +02:00
Ash Benz
cd36d71655 ipq806x/dts: Add Archer C2600 DTS
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ash Benz
7d963efc40 ipq806x/base-files: extract ath10k caldata
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ash Benz
14515cc271 ipq806x/base-files: Add support for Archer C2600
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ash Benz
98b50f0bef ipq806x/base-files: Add Archer C2600 LEDs and board
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ash Benz
ef02e8967c ipq806x: Add Archer C2600 to image/Makefile
Signed-off-by: Ash Benz <ash.benz@bk.ru>
2016-05-27 15:50:17 +02:00
Ram Chandra Jangir
5e49c57956 ipq806x: Add support for linux-4.4
1)Changes

- Rebased the patches for linux-4.4.7
- Added patch to fix spi nor fifo and dma support
- Added patch to configure watchdog barktime

2)Testing

Tested on IPQ AP148 Board:
 a. NOR boot and NAND boot
 b. ethernet network and ath10k wifi
 c. ubi sysupgrade

UnTested
 dwc3 usb has not been validated on IPQ board(AP148)

3)Known Issues:
 Once we flash ubi image on AP148, and if we reset the board, uboot on
 first boot creates PEB and LEB for dynamic sized partitions, which is incorrect
 and not what linux expects which causes errors when trying to mount rootfs.
 In order to test this, we can use the below steps:
  a. Flash the ubi image on board and don't reset the board
  b. load the kernel fit image in RAM and boot from there.

Signed-off-by: Ram Chandra Jangir <rjangi@codeaurora.org>
2016-05-27 15:50:17 +02:00
John Crispin
b8ab6af1a9 global: change my email address
Signed-off-by: John Crispin <john@phrozen.org>
2016-05-12 03:29:36 +02:00
Adrián Panella
e1041e1bc0 ipq806x: enable fpu
Enable hardfloat to use all the cpu power

Signed-off-by: Adrian Panella <ianchi74@outlook.com>
2016-05-12 03:29:36 +02:00
John Crispin
dc92917409 image / basefiles: make console password configurable
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
Signed-off-by: John Crispin <john@phrozen.org>
2016-04-18 21:53:07 +02:00
Hauke Mehrtens
85e523e126 kernel: update kernel 3.18 to 3.18.26
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 48496
2016-01-25 21:43:26 +00:00
Felix Fietkau
57776e68ce base-files: remove default /etc/config/network, generate it via board.d instead
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48493
2016-01-25 16:30:41 +00:00
John Crispin
78a6a9aec3 ipq806x: Add support for Netgear D7800
Signed-off-by: Tathagata Das <tathagata@alumnux.com>

SVN-Revision: 48360
2016-01-19 10:16:36 +00:00
Jonas Gorski
25ce154605 ipq806x: fix sysupgrade for AP148
AP148 uses lowercase name as boardname, so we need to use this in
platform.sh as well.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 48304
2016-01-18 10:46:58 +00:00
Felix Fietkau
2499a57d92 targets: add kernel image dependencies on device tree files
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 48146
2016-01-06 18:39:06 +00:00
Jo-Philipp Wich
67e1c87012 all: drop old uci-defaults.sh
Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one
and update all users accordingly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47867
2015-12-11 15:26:06 +00:00
Jo-Philipp Wich
08848936dd all: remove redundant board.d/00_model files
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47753
2015-12-04 11:07:06 +00:00
Jo-Philipp Wich
527ec2af59 all: remove dummy ucidef_set_interface_loopback() from board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47744
2015-12-03 23:13:00 +00:00
Jo-Philipp Wich
80a3e65a9d kirkwood, ipq806x: fix board.d script permissions
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47735
2015-12-03 22:42:13 +00:00
Jo-Philipp Wich
4615944c71 ipq806x: switch from uci-defaults to board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47730
2015-12-03 21:13:12 +00:00
Jonas Gorski
e9390dcf23 ipq806x: ap148/r7500: fix eth0 for non gige speeds
Eth0 is attached to mac0 of the switch with a fixed link and and not to
phy4 in single phy mode, so configuring it to anything but 1000FD will
break the connection, which will happen if a only 100 Mbit capapble device
is plugged into the wan port.

Fix this by not taking the state from phy4 and just configuring a fixed link
for eth0.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 47695
2015-12-02 22:16:23 +00:00
Felix Fietkau
c52d6d4f45 ipq806x: another fix to the stmmac DMA configuration to fix remaining data corruption issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47603
2015-11-22 21:59:22 +00:00
Felix Fietkau
a32f301b62 ipq806x: fix a nasty stmmac data corruption bug caused by faulty DMA initialization
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47594
2015-11-22 19:07:00 +00:00
Felix Fietkau
3789b1f5a0 ipq806x: update stmmac to the version from linux 4.3
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47593
2015-11-22 19:06:51 +00:00
Felix Fietkau
4018f15e21 ipq806x: fix PCIe reset gpio handling - the core already handles the active-low flag
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 47547
2015-11-21 10:55:29 +00:00