Commit graph

459 commits

Author SHA1 Message Date
John Crispin
b5f9e5e454 ar71xx: fix board detection for TP-LINK TL-WA860RE
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 43983
2015-01-17 07:06:45 +00:00
Imre Kaloz
211cac98d5 Belkin AC 1750 DB (F9K1115v2) support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43734
2014-12-17 08:27:38 +00:00
John Crispin
019ea725aa add "preinit_regular" diag.sh set_state argument
This new argument is used right after starting regular preinit (which
happens if failsafe wasn't triggered). The main purpose of "preinit"
argument is to indicate that failsafe can be triggered, however we were
missing a way to inform user that we don't wait for a trigger anymore.
With this change it's clear when failsafe mode can be triggered.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>

SVN-Revision: 43715
2014-12-15 10:37:00 +00:00
John Crispin
a28d07abbe ar71xx: add an extra check on board_name for ath10k firmware patchs
It moves firmware patch code behind an extra check on board_name.
Otherwise it will calculate firmware checksum for unaffected boards.
It also reduce boottime by a md5 calculation and removes error message
on boot if firmware not found.

SVN-Revision: 43679
2014-12-13 08:06:01 +00:00
Imre Kaloz
974f286261 add D-link DGL-5500 A1 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43401
2014-11-27 14:27:34 +00:00
Imre Kaloz
7f6c05d97e fix the r6100's wan led name
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43393
2014-11-26 11:38:59 +00:00
John Crispin
47ab1cbf23 ar71xx: add support for TP-LINK CPE210/220/510/520
This adds support for the TP-LINK CPE210/220/510/520 (Pharos series). These
devices are very similar to the Ubiquiti NanoStations, but with better specs:
faster CPU, more RAM, 2x2 MIMO.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 43385
2014-11-26 08:59:32 +00:00
Imre Kaloz
15f6f67d18 Netgear R6100 support
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 43382
2014-11-26 08:28:22 +00:00
John Crispin
f210f3811a ar71xx: Added support for D-link DHP-1565 rev. A1
Signed-off-by: Jacek Kikiewicz <jaceq@aol.pl>

SVN-Revision: 43307
2014-11-19 09:20:47 +00:00
John Crispin
6af2109a64 ar71xx: fix switch configuration in Ubiquiti UAP Pro
Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 43306
2014-11-19 09:20:18 +00:00
John Crispin
6fafcba63b ar71xx: Fix the sys LEDs on the EasyLink M150 and mini
Sets the system LED on the EasyLink M150 and mini to lower-case "easylink"

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 43271
2014-11-14 16:58:29 +00:00
John Crispin
52c267e2f7 ar71xx: add sysupgrade support for OpenMesh MR900v2
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43267
2014-11-14 16:55:14 +00:00
John Crispin
104be9f803 ar71xx: add user-space support for OpenMesh MR900v2
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43266
2014-11-14 16:55:04 +00:00
John Crispin
548822cd7a ar71xx: enable sysupgrade for the OpenMesh MR900
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43261
2014-11-14 16:54:28 +00:00
John Crispin
cfdaa8aefd ar71xx: add user-space support for the OpenMesh MR900 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 43259
2014-11-14 16:54:15 +00:00
John Crispin
2c72ffc154 ar71xx: add support for Netgear WNR2000v4
Signed-off-by: Michaël Burtin <mburtin@gmail.com>

SVN-Revision: 43173
2014-11-03 20:20:56 +00:00
Felix Fietkau
a1837135e0 ar71xx: add support for buffalo WZR-450HP2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 43026
2014-10-22 11:02:18 +00:00
John Crispin
24a0269b71 ar71xx: qihoo-c301: reset imageNtrynum after each successful boot.
Qihoo C301 has 2 flash chips of which one is used as primary and the
other is used as backup.  OEM U-Boot will try to boot an activeregion N
with imageNstatus=0 and imageNtrynum <= imagemaxtry.  If such a region
is found, bootloader will try to increment imageNtrynum and boot it.

This patch tries to reset imageNtrynum after each successful boot (if
the boot process reaches the execution of /etc/init.d/done).

	root@OpenWrt:/# hexdump -C -n 128 /dev/mtdblock9
	00000000  9e f3 63 91 61 63 74 69  76 65 72 65 67 69 6f 6e  |..c.activeregion|
	00000010  3d 31 00 69 6d 61 67 65  31 73 74 61 74 75 73 3d  |=1.image1status=|
	00000020  30 00 69 6d 61 67 65 32  73 74 61 74 75 73 3d 30  |0.image2status=0|
	00000030  00 69 6d 61 67 65 32 74  72 79 6e 75 6d 3d 30 00  |.image2trynum=0.|
	00000040  69 6d 61 67 65 6d 61 78  74 72 79 3d 33 00 69 6d  |imagemaxtry=3.im|
	00000050  61 67 65 31 74 72 79 6e  75 6d 3d 30 00 00 00 00  |age1trynum=0....|
	00000060  00 00 00 00 00 00 00 00  00 00 00 00 00 00 00 00  |................|

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 42914
2014-10-14 12:21:36 +00:00
John Crispin
20940138ac scripts: fix wrong usage of '==' operator
[base-files] shell-scripting: fix wrong usage of '==' operator

normally the '==' is used for invoking a regex parser and is a bashism.
all of the fixes just want to compare a string. the used busybox-ash
will silently "ignore" this mistake, but make it portable/clean at least.

this patch does not change the behavior/logic of the scripts.

Signed-off-by: Bastian Bittorf <bittorf@bluebottle.com>

SVN-Revision: 42911
2014-10-14 12:21:11 +00:00
John Crispin
99c238ff15 ar71xx: Fix LED definitions for the DRAGINO2 board
This patch fixes LED definitions for the DRAGINO2 board.

1. It renames the Router/USB led to System, as it is now marked "SYS" on the board.
2. It gives control of the LAN and WAN leds and some other GPIOs to Linux.
3. It fixes the active_low property for the LAN and WAN leds.
4. It sets up WLAN, LAN and WAN leds in the UCI defaults.
5. It allows usage of the System led by the diag.sh script, so it will be used to indicate boot and failsafe status.

Signed-off-by: Vittorio Gambaletta <openwrt@vittgam.net>

SVN-Revision: 42897
2014-10-14 10:33:07 +00:00
John Crispin
e77ae183a1 ar71xx: correctly detect hardware revision on TP-LINK Archer C5 and C7
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42797
2014-10-06 04:53:34 +00:00
John Crispin
7f772910a1 ar71xx: fix syntax for TP-LINK TL-WR941N/ND / Rosewill RNX-N360RT detection
[ ] conditions should use = instead of == for string equality.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42796
2014-10-06 04:53:25 +00:00
John Crispin
05777fb947 ar71xx: simplify TP-LINK model detection
All TP-LINK machine names begin with "TP-LINK", so there's no need to check for
more specific model names. This also allows adding new models like the Archer
series more easily.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 42795
2014-10-06 04:53:20 +00:00
John Crispin
491e028e2d ar71xx: add LED defaults for the EnGenius ESR1750
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42786
2014-10-06 04:52:13 +00:00
John Crispin
7dbbdfb61f ar71xx: add qihoo 360 c301 router support
Qihoo 360 C301 is a dual band wireless router supports 802.11n and 802.11ac.
Its chipset is AR9344 + AR9882 with two 16MB flashes.

This patch adds its initial support.

v2:
* use mtd_get_mac_ascii to fetch MAC address for ath10k.
* use ath79_register_pci to initialize AR9882.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 42552
2014-09-15 10:19:38 +00:00
John Crispin
cb37fe5ca5 ar71xx: add board support for ubnt loco m xw
Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 42549
2014-09-15 10:19:14 +00:00
John Crispin
254b2670e1 ar71xx: add Support for RB2011UiAS-2HnD
SVN-Revision: 42317
2014-08-28 06:27:45 +00:00
John Crispin
79c04e1897 ar71xx: enable sysupgrade for the EnGenius ESR900
Signed-off-by: Forest Crossman <cyrozap@gmail.com>

SVN-Revision: 42279
2014-08-25 06:35:54 +00:00
Imre Kaloz
ecba34a3ee add support for the NC-LINK SMART-300
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 42130
2014-08-11 11:44:51 +00:00
Imre Kaloz
dc628f2e08 add support for the archer c5
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41814
2014-07-23 12:47:25 +00:00
John Crispin
3bb8589787 ar71xx: fix LED configuration for HiWiFi-HC6361.
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>

SVN-Revision: 41809
2014-07-23 07:46:07 +00:00
John Crispin
4f5081c911 ar71xx: fix WAN MAC setup on dir-825-c1
Changeset 38690 broke the WAN MAC setup. Here's the fix.

Signed-off-by: Sebastian Kemper <sebastian_ml <at> gmx.net>

SVN-Revision: 41795
2014-07-21 19:26:54 +00:00
John Crispin
eae9b2541a ar71xx: split wndr4300 and wndr3700v4 into 2 seperate mips machines
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41788
2014-07-21 18:41:52 +00:00
John Crispin
f68665ac1d ar71xx: enable sysupgrade for the OpenMesh OM5P
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41772
2014-07-20 17:30:52 +00:00
John Crispin
e50abb5d53 ar71xx: add user-space support for the OpenMesh OM5P
Signed-off-by: Marek Lindner <marek@open-mesh.com>
[sven@open-mesh.com: Rebased]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 41770
2014-07-20 17:30:44 +00:00
John Crispin
7388053ba3 ar71xx: add RB91x boards to uci-defaults 02_network
The default case in 02_network is inappropriate for the MikroTik RouterBOARD 91x boards because they do not have a WAN port, so don't bother setting the non-existent eth1 interface as the WAN port.

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>

SVN-Revision: 41767
2014-07-20 17:30:24 +00:00
John Crispin
d19530c693 ar71xx: Add UBNT airGateway support
This patch adds support for the Ubiquiti Networks airGateway.

Based in part on code posted by David Hutchison <dhutchison@bluemesh.net> on openwrt-devel:
  https://lists.openwrt.org/pipermail/openwrt-devel/2013-December/023035.html

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>

SVN-Revision: 41766
2014-07-20 17:30:17 +00:00
Imre Kaloz
7e2c4d5732 extract and fixup the board.bin on the archer
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>

SVN-Revision: 41757
2014-07-19 13:20:14 +00:00
Gabor Juhos
54206fb0ce ar71xx: add user-space support for the EnGenius EAP300 v2 board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41659
2014-07-14 21:30:28 +00:00
Gabor Juhos
f27f2fec4f ar71xx: add user-space support for the Tube2H board
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41650
2014-07-14 16:03:35 +00:00
Gabor Juhos
50c554a475 ar71xx: add user-space support for the EnGenius ESR900
Signed-off-by: Forest Crossman <cyrozap@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5716/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41641
2014-07-14 10:25:51 +00:00
John Crispin
e503eeb465 ar71xx: add support for nanostation m xw
SVN-Revision: 41636
2014-07-14 07:38:43 +00:00
Gabor Juhos
2d6542242a ar71xx: add user-space support for EnGenius ESR1750
Signed-off-by: Jon Suphammer <jon@suphammer.net>
Patchwork: http://patchwork.openwrt.org/patch/5840/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41625
2014-07-13 19:43:58 +00:00
Gabor Juhos
6991725a1e ar71xx: add user-space support for GL.iNet v1
Patch is based on http://patchwork.openwrt.org/patch/5273/.

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Michel Stempin <michel.stempin@wanadoo.fr>
Signed-off-by: Mark Janssen <mark@sig-io.nl>
Signed-off-by: alzhao <alzhao@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5652/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41619
2014-07-13 18:21:06 +00:00
Gabor Juhos
0ffe21c792 ar71xx: Support for Mikrotik RB2011UiAS
The RB2011UiAS is almost exactly the same as the RB2011UAS, which is
already supported. Hardware-wise, it adds a passive power injector on
Eth10. Software-wise, Routerboot passes a different board name on the
kernel command line. Hence the need for a patch.

Not yet working:

* touchscreen: doesn't work on RB2011UAS either. The touchscreen itself
  seems to be driven by an ADS7843-compatible IC, but figuring out which
  GPIO pins it's connected to is work for the future.
* control of power injector: remains off. Probably also GPIO-controlled.

Signed-off-by: Soren Harward <stharward@gmail.com>
Patchwork: http://patchwork.openwrt.org/patch/5841/
[juhosg: rename and refresh the kernel patch]
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 41617
2014-07-13 16:25:58 +00:00
John Crispin
9e26031a88 ar71xx: add support for TP-LINK TL-WA860RE v1
New router/repeater from TP-LINK

- CPU: Atheros AR9341-DL3A (AP123)
- Flash: 4MB
- Ram: 32MB

Similar to TL-WA850RE.

Changes: rename file after r41596

Signed-off-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>

SVN-Revision: 41598
2014-07-13 10:03:41 +00:00
John Crispin
42a37b2a89 ar71xx: added support for TL-WA830RE V2
Corrected patch ath79 insted of auth79. Sorry.

Signed-off-by: Fredrik Jonson <fredrik@famjonson.se>

SVN-Revision: 41596
2014-07-13 07:12:22 +00:00
John Crispin
f8f6678574 ar71xx: nbg6716: extract ath10k wifi board.bin
With help of this script the ath10k board.bin settings are loaded from
flash and saved to the ath10k firmware directory. The driver reads it
later in the boot process.

Signed-off-by: André Valentin <avalentin@marcant.net>

SVN-Revision: 41562
2014-07-10 19:16:23 +00:00
John Crispin
3519322e62 ar71xx: Add support for MikroTik RouterBOARD SXT Lite
This patch adds support for the MikroTik RouterBOARD SXT Lite.

The new RB911L series is also supported as a result.

v2 of this patch fixes the wmac offset to match what is on the sticker.
v3 refreshes the patch against r41148 and defines the power led as the status led in diag.sh
v4 refreshes the patch against r41353 and fixes the patch path issue to make git am work correctly
v5 selects the kernel config option in the mikrotik profile rather than in the main ar71xx config

Signed-off-by: Matthew Reeve <mreeve@tenxnetworks.com>
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 41450
2014-07-01 13:38:30 +00:00
John Crispin
e6e6a85dc9 ar71xx: add support for EasyLink M150 and M-mini
v3 refreshes the patch on trunk@41337

This patch adds support for the EasyLink EL-M150 and M-mini

http://wiki.openwrt.org/toh/easylink/el-m150
http://wiki.openwrt.org/toh/easylink/el-m-mini

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 41348
2014-06-26 11:49:47 +00:00