KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
23962 commits 1 branch 0 tags 154 MiB
Commit graph

10217 commits

Author SHA1 Message Date
John Crispin
338ff04cab ramips: add gpio base properties to dtsi files 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36560
 2013-05-06 16:45:04 +00:00
John Crispin
65760ede8b ramips: unbreak rt2880 support 
Signed-off-by: John Crsipin <blogic@openwrt.org>

SVN-Revision: 36559
 2013-05-06 16:44:56 +00:00
John Crispin
28bdb9efe9 ramips: fix DIR-602D1 flash size 
Fix DIR-620D1 flash size.

Signed-off-by: Serge Vasilugin <vasilugin@yandex.ru>

SVN-Revision: 36558
 2013-05-06 16:44:47 +00:00
John Crispin
1c89a60431 ramips: unbreak gpio handling for uart mux group 
this should fix the handling of corner cases

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36543
 2013-05-04 11:36:51 +00:00
Gabor Juhos
bb429757c8 at91: build .dtb file for the CalAmp LMU500 board 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36542
 2013-05-03 19:01:00 +00:00
Gabor Juhos
ccf95fe938 ar71xx: Fix AP135 PCI 
AP135 has a pluggable PCIE slot unlike AP136.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36541
 2013-05-03 19:00:58 +00:00
Felix Fietkau
18c588a570 ar71xx: add an external reset callback for ar913x and use it in ath9k - should reduce the frequency of DMA stop failures 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36530
 2013-05-03 09:12:19 +00:00
Felix Fietkau
30c4360345 kernel: do not strip /proc/net/ip_mr_* in the /proc debloat patch, it is used by iproute2 
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 36529
 2013-05-02 15:59:57 +00:00
Jonas Gorski
24636fcabf bcm63xx: split into two subtargets, generic and SMP 
Make SMP a subtarget, since it only supports BCM6362 and BCM6368.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36527
 2013-05-02 15:28:31 +00:00
Jonas Gorski
d11efa1428 bcm63xx: add SMP support for BCM6362 and BCM6368 
BCM6358 requires further work due to its shared TLB.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36526
 2013-05-02 15:28:26 +00:00
Jonas Gorski
8f15326acc kernel: generic: don't strip /proc/irq on SMP 
/proc/irq is needed for changing the SMP affinity of interrupts.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36525
 2013-05-02 15:28:12 +00:00
Jonas Gorski
a80a4f3ec2 bcm63xx: fix hsspi flash registration for BCM6362 
Use busnum 1 for HSSPI so it won't conflict on chips having both SPI
controllers.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36524
 2013-05-02 15:28:10 +00:00
Jonas Gorski
999a956f4c bcm63xx: fix/enable livebox minipci 
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>

SVN-Revision: 36523
 2013-05-02 15:28:07 +00:00
Jo-Philipp Wich
6ac2b3b76a atheros: remove static gpio_request() from board setup and include generic kmod-gpio-button-hotplug instead. 
This change is based on a patch by Karl Palsson <karlp@remake.is>
See http://patchwork.openwrt.org/patch/3536/.

SVN-Revision: 36513
 2013-05-02 11:46:53 +00:00
Gabor Juhos
8a9fe26f20 kernel: update linux 3.8 to 3.8.11 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36507
 2013-05-01 22:15:18 +00:00
Florian Fainelli
db02b0e4ee brcm63xx: fix typo and missing BCM6328 check in BCM6345 ethernet patch 
And while at it, also include a define check for BCM6328, thanks to
Gabor for spotting this.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36506
 2013-05-01 21:52:25 +00:00
Florian Fainelli
292368409e brcm63xx: add missing binary operands to BCM6345 ethernet patch 
Thanks to Emilio Arias for reporting it.

Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36505
 2013-05-01 21:12:40 +00:00
Florian Fainelli
6f48ccea02 brcm63xx: remove 3.7 kernel support 
Signed-off-by: Florian Fainelli <florian@openwrt.org>

SVN-Revision: 36504
 2013-05-01 21:12:26 +00:00
Gabor Juhos
0ae43dbe9d ar71xx: rename WNR2000v3 support patch 
Update the numbering of kernel patch for supporting
Netgear WNR2000v3 from 617 to 618.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36498
 2013-04-30 10:44:11 +00:00
Gabor Juhos
d557a51a40 x86/geos: switch to 3.8.10 
Compile tested only.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36496
 2013-04-30 10:44:09 +00:00
Gabor Juhos
0fa71ca3e5 linux/3.9: implement pcibios_get_phb_of_node for MIPS 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36495
 2013-04-30 10:44:08 +00:00
Gabor Juhos
41445b41cc linux/3.8: use backported pcibios_get_phb_of_node patches 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36494
 2013-04-30 10:44:07 +00:00
Gabor Juhos
f718179af5 kernel: update linux 3.8 to 3.8.10 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36493
 2013-04-30 10:43:59 +00:00
Gabor Juhos
8e466dcdf4 at91: add missing config symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36492
 2013-04-30 10:43:58 +00:00
Gabor Juhos
d35545f3d7 linux/3.{8,9}: add missing symbols 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36491
 2013-04-30 10:43:57 +00:00
Gabor Juhos
25c45c0d53 linux/3.{8,9}: turn on CONFIG_NET_SCH_FQ_CODEL 
It is forced to 'y' since r36342.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36490
 2013-04-30 10:43:56 +00:00
John Crispin
eff12a630d ramips: move dlink profile to correct sub folder - 2nd try 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36489
 2013-04-30 10:34:20 +00:00
John Crispin
1db4587bc7 ramips: move dlink profile to correct sub folder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36487
 2013-04-30 08:24:26 +00:00
Hauke Mehrtens
ca7f9638d5 broadcom-diag: support for the WNDR3700v3 
I recently picked up a WNDR3700 to put OpenWRT on, and only after tearing into the box did I find it
was one of the v3 boards, with poor OpenWRT support. This patch should add the board detection and
LED/button control to the broadcom-diag module, and should generate a netgear .chk image that the
bootloader and stock firmware will accept.

The changes to the broadcom-diag module are more than a few lines because the WNDR3700v3 is driving
its LEDs through an HC164 8-bit shift register.

Signed-off-by: Owen Kirby <osk@exegin.com>

SVN-Revision: 36482
 2013-04-28 21:11:17 +00:00
Hauke Mehrtens
7dee0dae35 brcm47xx: use kernel 3.8.10 as default kernel 
The biggest change with this kernel is a new partition parser.

SVN-Revision: 36480
 2013-04-28 18:25:16 +00:00
Hauke Mehrtens
00a7ace7cf brcm47xx: add board detection for NETGEAR WNDR4500 V2 
SVN-Revision: 36478
 2013-04-28 18:19:31 +00:00
Hauke Mehrtens
e7e4afbb64 kernel: fix a memory leak in split_rootfs_data() 
allocate_partition() copies all the content of dpart into a new struct.

SVN-Revision: 36475
 2013-04-28 17:01:56 +00:00
Hauke Mehrtens
1bac172c44 kernel: update bcma and ssb for kernel 3.8+ to version from wireless-testing master-2013-04-26. 
SVN-Revision: 36473
 2013-04-28 16:52:11 +00:00
Jonas Gorski
ad1d3f00cb kernel: update linux 3.9 patches to rc8 
Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36469
 2013-04-28 11:55:23 +00:00
Jonas Gorski
a33dd13c98 kernel: add missing bcma defines and header file for bcrmfmac 
Fixes build failure when having kmod-mmc and brcmfmac selected.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 36468
 2013-04-28 11:10:42 +00:00
Gabor Juhos
7c2632fbc5 ar71xx: add user-space support for WNR2000v3 
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36461
 2013-04-26 17:00:54 +00:00
Gabor Juhos
b29b7b65ea ar71xx: add profile and build image for WNR2000v3 
Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36460
 2013-04-26 17:00:53 +00:00
Gabor Juhos
9b3c0d11a2 ar71xx: Add Netgear WNR2000v3 support 
Network connectivity works fine (LAN and WAN).
For GPIOs, only pwr led and the green wan leds are supported for now.

Signed-off-by: Mathieu Olivari <mathieu.olivari@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36459
 2013-04-26 17:00:52 +00:00
Gabor Juhos
183e2af1c7 ar71xx: add profile and build image for the TL-WR720N v3 board 
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36458
 2013-04-26 17:00:50 +00:00
Gabor Juhos
7c4e2c1f72 ar71xx: add user-space support for the TL-WR720N v3 board 
Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36457
 2013-04-26 17:00:49 +00:00
Gabor Juhos
5c11773f8a ar71xx: add kernel support for TPLINK WR720N v3 
Add support for TPLINK WR720N v3 which has 4MB flash,
32MB ram, 2 ethernet interfaces, 1 USB 2.0 port.

The patch is mostly a modification from mach-tl-wr703n.c.
GPIO numbers for the slider switch is from mach-tl-mr3020n.c.

Tested on my device and they worked fine.

Signed-off-by: yousong <yszhou4tech@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36456
 2013-04-26 17:00:48 +00:00
Gabor Juhos
c0691e29f1 mpc85xx: Add subtargets Generic and P1020 
Only difference between Generic and P1020 is that P1020
enables SMP with two CPUs in the kernel config.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36454
 2013-04-26 16:57:43 +00:00
Gabor Juhos
36d4fd70bc kernel: update linux 3.8 to 3.8.9 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36453
 2013-04-26 16:55:42 +00:00
Gabor Juhos
988ae9cbf8 at91: upgrade to kernel 3.8.7 and use devicetree 
This upgrades the AT91 target to 3.8.7, and migrates to device tree.
This allows a single kernel to be built for most at91 variants which
simplifies things quite a bit. The immediate result is that all
subtargets are nuked, and any boards without dts files are no longer
supported, though the target now includes more boards than before. The
adc driver was also nuked as 3.8.7 includes a new one under the IIO
subsystem.

Signed-off-by: Adam Porter <porter.adam@gmail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36452
 2013-04-26 16:55:40 +00:00
Gabor Juhos
c63bb1a18e ramips: rt3883: fix build error 
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 36451
 2013-04-26 16:55:28 +00:00
John Crispin
b42a173664 lantiq: make leds and network work on VG3503J 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36445
 2013-04-25 19:03:41 +00:00
John Crispin
520bf46375 lantiq: fix board detection helpers 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36444
 2013-04-25 19:03:37 +00:00
John Crispin
157c86371f lantiq: move dts files to thir own folder 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36443
 2013-04-25 19:03:32 +00:00
John Crispin
4664e21293 generic: fix rtl8366_smi compile warning 
drivers/net/phy/rtl8366_smi.c: In function 'rtl8366_sw_set_vlan_ports':
drivers/net/phy/rtl8366_smi.c:1125:6: warning: 'pvid' may be used uninitialized in this function [-Wuninitialized]

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36442
 2013-04-25 19:03:29 +00:00
John Crispin
9ae3adbe3c lantiq: disable sw portmaps on xrx200 ethernet as segment solation does not work yet 
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 36441
 2013-04-25 19:03:25 +00:00