Commit graph

25195 commits

Author SHA1 Message Date
Felix Fietkau
083b0a06a3 ar71xx: use uimage split for Ubiquiti XM devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37297
2013-07-14 14:05:39 +00:00
Felix Fietkau
6702955857 ar71xx: increase kernel size for wndr3700 based devices
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37296
2013-07-14 14:05:35 +00:00
Felix Fietkau
25d910a78f ar71xx: use uimage split for WZR-HP-G300NH2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37295
2013-07-14 14:05:31 +00:00
Felix Fietkau
6bff456212 ar71xx: enable uimage split for wzr-hp-ag300h/wzr-600dhp
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37294
2013-07-14 14:05:27 +00:00
Felix Fietkau
fbde376c53 ar71xx: use uimage split for WZR-HP-G300NH
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37293
2013-07-14 14:05:23 +00:00
Felix Fietkau
a7c5f6708b ar71xx: use uimage split for WZR-HP-G450H
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37292
2013-07-14 14:05:19 +00:00
Felix Fietkau
ab5e21a9a5 ar71xx: enable uimage split and use it for carambola2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37291
2013-07-14 14:05:16 +00:00
Felix Fietkau
8d5d96e833 ar71xx: remove linux 3.8
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37290
2013-07-14 14:05:12 +00:00
Felix Fietkau
d1238718c2 ar71xx: move the watchdog driver to the kernel
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37289
2013-07-14 14:05:08 +00:00
Felix Fietkau
8cf868e1a6 ar71xx: set linux 3.10 as default
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37288
2013-07-14 14:05:04 +00:00
Hauke Mehrtens
a5c0ad6354 brcm47xx: add initial support for kernel 3.10
SVN-Revision: 37287
2013-07-14 13:44:45 +00:00
Hauke Mehrtens
3bc90a4d23 brcm47xx: fix switch handling
This fixes some problems with the switch handling

 * It now send the messages again to indicate a button for failsafe mode should be pressed
 * it does not leak packages between wan and lan any more
 * the switch works again in normal mode

The Ethernet connection has to be up when the switch driver switch-robo
is insmoded therefor we just do it again.
Explicitly set enable_vlan to prevent leaking packages.

This should close #13869, #13868 and #13716

SVN-Revision: 37286
2013-07-14 13:19:58 +00:00
Felix Fietkau
17bbc92882 kernel: disable the yaffs2 /proc code to make it compile on linux 3.10 (#13848)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37285
2013-07-14 13:10:22 +00:00
Hauke Mehrtens
ef0b9be95e brcm47xx: do not load the kernel modules needed for Ethernet manually
add the boot flag to make the kernel modules needed for Ethernet and
diag load on startup.

SVN-Revision: 37284
2013-07-14 12:59:00 +00:00
Felix Fietkau
656d475043 kernel: implement automatic rootfs split from the firmware partition in linux 3.10 (disabled by default)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37283
2013-07-14 12:57:03 +00:00
Felix Fietkau
b95bdc8ab5 kernel/base-files: clean up old code related to refreshing mtd partitions, it is no longer used anywhere
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37282
2013-07-14 12:56:58 +00:00
Hauke Mehrtens
e800436de3 brcm47xx: do not change nvram without user interaction
SVN-Revision: 37281
2013-07-14 12:56:42 +00:00
Hauke Mehrtens
9a5a262324 broadcom-diag: make it work with kernel 3.10
In kernel 3.10 the proc interface changed, this patch adds the changes needed for the new interface.

SVN-Revision: 37280
2013-07-14 11:30:31 +00:00
Hauke Mehrtens
c7370edf98 broadcom-diag: check the correct value for not null.
This also fixes a compile warning.

SVN-Revision: 37279
2013-07-14 11:28:37 +00:00
Hauke Mehrtens
63d818a219 broadcom-diag: reoder some parts.
This was done to reduce the number of forward declaration needed.
This does not contain any real change in the code.

SVN-Revision: 37278
2013-07-14 11:26:35 +00:00
Felix Fietkau
3a4a74f861 busybox: disable features marked as broken (#13782)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37277
2013-07-14 11:00:59 +00:00
Hauke Mehrtens
da72edd7cd kernel: refresh patches for kernel 3.8.13
SVN-Revision: 37276
2013-07-13 22:45:56 +00:00
Hauke Mehrtens
06accca1d7 kernel: update to kernel 3.10.1 and refresh patches
SVN-Revision: 37275
2013-07-13 22:45:09 +00:00
Hauke Mehrtens
e574f75d16 kernel: update to kernel 3.9.10 and refresh patches
SVN-Revision: 37274
2013-07-13 22:43:10 +00:00
Felix Fietkau
9b9c6facfc ar71xx: fix ar933x watchdog clock (#13866)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37273
2013-07-13 22:29:53 +00:00
Hauke Mehrtens
e041d370a7 brcm47xx: proc gets mounted without this patch
SVN-Revision: 37272
2013-07-13 21:42:19 +00:00
Hauke Mehrtens
8dabd7a26b brcm47xx: remove obsolete hotplug stuff
SVN-Revision: 37271
2013-07-13 20:38:33 +00:00
Felix Fietkau
299c2ceafa mac80211: tweak mac address allocation
Apparently there are some broken devices out there that have the local
bit already set in the factory MAC address. Move the | 0x2 over to the
other side of the xor operation to fix this without affecting devices
with proper addresses.

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37269
2013-07-13 11:39:48 +00:00
Hauke Mehrtens
9e9261a718 bcm53xx: add initial support for ARM based BCM47XX and BCM53XX SoCs
This was only tested on a Netgear R6250, but it could also work on
other devices when the correct images are generated.
It is only possible to boot into a ram disk, no Ethernet, Wifi, flash,
USB is supported.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 37268
2013-07-12 13:46:27 +00:00
Felix Fietkau
92961e0917 mac80211: reconfigure in Build/Compile instead of Build/Configure to catch kernel config changes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37265
2013-07-12 08:10:19 +00:00
Felix Fietkau
f8543faec4 mac80211: merge a fix for PS-Poll handling, refresh patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37264
2013-07-12 07:59:59 +00:00
Felix Fietkau
e389c2b410 mac80211: remove bogus module params from compat.ko
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37263
2013-07-12 07:59:51 +00:00
John Crispin
39531131a9 ar71xx: add carambola2 support
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37260
2013-07-11 21:16:53 +00:00
John Crispin
182866ecdc procd: update to latest git revision
this fixes a regression in the watchdog init code

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37259
2013-07-11 21:16:43 +00:00
John Crispin
93c4359512 lantiq: revert 36778 as it breaks irq assignment to pci devices
Reported-by: Matti Laakso
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37258
2013-07-11 21:16:34 +00:00
John Crispin
3c306f9d07 procd: make the log port default to 514 if none is specified
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37257
2013-07-11 21:16:25 +00:00
Felix Fietkau
bec39b26ad kernel: move codel from kmod-sched-core to kmod-sched, it is rarely needed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37256
2013-07-11 20:56:30 +00:00
Felix Fietkau
4932368398 kernel: add a patch that reduces module size by removing non-essential information (reduces default rootfs size by ~5k after lzma)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37255
2013-07-11 20:56:27 +00:00
Felix Fietkau
c38b7b3913 kernel: make libsas depend on x86
It is only used by one driver that already depends on x86. Disabling it
prevents a few kilobytes of bloat from leaking into all targets via
CONFIG_BLK_DEV_BSG

Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37254
2013-07-11 20:56:22 +00:00
Felix Fietkau
19e3ec0570 kernel: disable CONFIG_RD_LZMA by default, it will be selected when actually needed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37253
2013-07-11 20:56:19 +00:00
Felix Fietkau
f5ae93e941 kernel: disable CONFIG_CLS_U32_PERF by default, it is usually not needed
Signed-off-by: Felix Fietkau <nbd@openwrt.org>

SVN-Revision: 37252
2013-07-11 20:56:15 +00:00
John Crispin
2d854d022c ar71xx: set priority of ath79_wdt to 1
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37251
2013-07-11 17:01:08 +00:00
John Crispin
585ab22c0f procd: update to latest git version
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37250
2013-07-11 17:01:03 +00:00
John Crispin
6f1112a5e8 procd: add proto and trigger support to the /etc/init.d/log
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37249
2013-07-11 17:00:59 +00:00
John Crispin
8eb56a88a4 procd: add a small script that handles config reloads until configd is ready
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37248
2013-07-11 17:00:54 +00:00
John Crispin
67eb275f69 procd: the delete ubus call was passed the wrong field name for services
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37247
2013-07-11 17:00:49 +00:00
John Crispin
3fcee6de2f ubox: upgrade to latest version
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37246
2013-07-11 17:00:45 +00:00
John Crispin
8d546699c5 dropbear: register a config.change trigger
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37245
2013-07-11 17:00:40 +00:00
John Crispin
8069d87d3c base-files: convert sysntpd init script to procd
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37244
2013-07-11 17:00:35 +00:00
John Crispin
928b503435 busybox: convert crond init script to procd
Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 37243
2013-07-11 17:00:30 +00:00