Commit graph

285 commits

Author SHA1 Message Date
Jo-Philipp Wich
cc59f31e44 ar71xx: convert gpio switch config to board.d
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47763
2015-12-04 15:02:42 +00:00
Jo-Philipp Wich
963fc89df2 ar71xx: switch network and led defaults to board detection framework
Also translate ucidef_add_switch_vlan() to ucidef_add_switch_ports() for better
switch topology mapping and improved default config generation.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47663
2015-11-26 14:42:28 +00:00
Jo-Philipp Wich
3fac6dde85 Revert "ar71xx: migrate led and network setup to board detection framework"
The board detect code needs more fixes in order to work properly.

Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47641
2015-11-25 11:53:59 +00:00
Jo-Philipp Wich
ade2c06d61 ar71xx: migrate led and network setup to board detection framework
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>

SVN-Revision: 47534
2015-11-20 22:14:36 +00:00
Hauke Mehrtens
fa137d51f5 ar71xx: add Arduino Yun
This is based on patches from Federico Fissore <f.fissore@arduino.cc>
especially this one:
7e2976fa83

The console is running with 250000 baud which is a non standard baud
rate and needs an extra patch to be applied, I will try to get this
patch upstream or something else which accomplish the same.

Some upstream code looks like there are many different versions of this
SoC, are these only internal versions and all versions on the consumer
market are the same? I saw different GPIO configuration and flash sizes
of 8MB and 16MB?

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>

SVN-Revision: 47451
2015-11-10 23:13:09 +00:00
Felix Fietkau
7f75961e38 ar71xx: add support for TP-LINK TL-WR941ND v6 (international version)
The international version is completely different from the already
supported Chinese version. The WLAN of the QCA956x SoC used by this router
has been fixed in r46948.

This patch looks like it changes a lot in
700-MIPS-ath79-openwrt-machines.patch; that is not the case. Unfortunately,
quilt decided to completely reorganize the Kconfig patch even though only
a single section has been added.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 47420
2015-11-08 20:39:18 +00:00
Felix Fietkau
ae7e7239b8 ar71xx: Add support for ZyXEL NBG6616.
Signed-off-by: Benjamin Berg <benjamin@sipsolutions.net>

SVN-Revision: 47405
2015-11-07 12:51:39 +00:00
John Crispin
8d8a937272 ar71xx: Add Gainstrong MiniBox v1.0 support to trunk
This patch supersedes the v1 from September 17th.

Bumping the patch version - the MiniBox profile showed up under M, but
since it's called 'Gainstrong MiniBox v1.0' now it looks out of place.
Renamed the profile to gs-minibox-v1.mk to fix that.

The following patch adds support for the Gainstrong MiniBox into trunk
(or 'Designated Driver' :D ).

Fixed items:

- Inverted LED polarity (OOLITE seems to suffer from the same problem).
- Changed uppercase MINIBOX_V1_ prefix as requested.
- Prefixes are now gs_minibox_ similar to gs_oolite_ (same vendor).
- Mention the vendor (Gainstrong) in code headers.

Compiles fine, has been confirmed working by owners on 15.05.

Question: I've seen some boards use tools/firmware-utils/src/mktplinkfw.c,
the MiniBox images build fine without, so I'm wondering: do I need to add
it in there as well? Any added benefit?

Thank you

Signed-off by: Stijn Segers <francesco.borromini@inventati.org>

SVN-Revision: 47234
2015-10-19 17:55:25 +00:00
John Crispin
257e76a3df ar71xx: Bitmain Antminer S1 & S3 cleanup
Sets the LEDs to boardname:color:led-name
Sets the LAN to eth0
Other corrections such as the Machine Name and HWIDs
v2 corrects the profile names in the Makefile and changes tabs to spaces
in the Makefile 'define Device/' like the other devices.

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 47221
2015-10-19 10:10:02 +00:00
John Crispin
fa09d76521 ar71xx: uci-defaults: fix ap143 to appropriate group
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>

SVN-Revision: 46970
2015-09-16 08:32:56 +00:00
John Crispin
1297679f4b ar71xx: Add UBNT airGateway Pro support
This patch adds kernel and userspace support for the Ubiquiti Networks airGateway Pro.

Signed-off-by: Matthew Reeve <mreeve at tenxnetworks.com>

SVN-Revision: 46961
2015-09-16 08:31:40 +00:00
John Crispin
0dbced8a48 ar71xx: add TP-LINK TL-WDR3320 v2 support
This patch adds support for TP-LINK TL-WDR3320 v2.

This router uses a chinese version 2 firmware header,.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

SVN-Revision: 46934
2015-09-14 20:12:16 +00:00
John Crispin
cbf71651ec ar71xx: add user-space support for the OpenMesh MR1750 board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46927
2015-09-14 20:11:01 +00:00
John Crispin
d1587fb4aa ar71xx: assign proper GPIO pin for Ubiquiti Nanostation models
The GPIO pins for "POE passthrough" of Ubiquiti Nanostation models are the
following:
* Ubiquiti Nanostation M XM: Pin 8
* Ubiquiti Nanostation M XW: Pin 2

The previous definition of the pins was mixed up between XM and XW model.

Signed-off-by: Lars Kruse <lists@sumpfralle.de>

SVN-Revision: 46922
2015-09-14 20:09:40 +00:00
Felix Fietkau
2ce833060a target: ar71xx: add support for COMFAST CF-E316N v2 board
This adds full support (sans sysupgrading from vendor firmware) for the COMFAST
CF-E316N v2 (aka CF-E316V2, CF-E316N-V2 and CF-E316Nv2.0, no FCC ID) by
Shenzhen Four Seas Global Link Network Technology Co., Ltd (this company is
actively refusing to provide GPL'd sources for the OpenWrt version they ship
with the device, damn them).

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 46852
2015-09-11 16:31:35 +00:00
John Crispin
af60c367b7 ar71xx: add support for TP-Link TL-WDR6500 v2
Signed-off-by: Weijie Gao <hackpascal@gmail.com>

This patch adds support for TP-Link TL-WDR6500 v2.

The firmware has a U-Boot header for kernel, and a TP-LINK v2 header for
the whole firmware, so I have to create a new firmware creation method.

SVN-Revision: 46663
2015-08-17 06:24:04 +00:00
John Crispin
4463bc017b ar71xx: Add support for Black Swift
Add support for the Black Swift board:
http://www.black-swift.com/

Took relevant parts and slightly adapted from:
https://github.com/blackswift/openwrt/blob/master/bsb.patch

Signed-off-by: Bruno Randolf <br1@einfach.org>

SVN-Revision: 46651
2015-08-17 06:16:54 +00:00
John Crispin
5cd49bb067 ar71xx: add support for Onion Omega
This patch adds support for the Onion Omega.

https://onion.io/omega

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: Boken Lin <bl@onion.io>
Tested-by: Jacky Huang <huangfangcheng@163.com>

SVN-Revision: 46458
2015-07-24 09:09:49 +00:00
John Crispin
b98205c946 ar71xx: Add support for AP147-010 reference board
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 46457
2015-07-24 09:09:42 +00:00
Felix Fietkau
d26e8d9439 Revert "ar71xx: Add support for Cisco-Linksys WAP4410N" (r46250)
The commit is incomplete, it does not even build the mach-* file

This reverts commit 6e6adcf7a197b1802cb728ddcccf05f890ca0574

SVN-Revision: 46425
2015-07-19 17:58:27 +00:00
John Crispin
1eccdb4fd4 ar71xx: add support for the devolo dLAN pro 1200+ WiFi ac
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46342
2015-07-14 07:37:03 +00:00
John Crispin
02984a6e09 ar71xx: add support for the devolo dLAN pro 500 Wireless+
Signed-off-by: Günther Kelleter <guenther.kelleter@devolo.de>

SVN-Revision: 46338
2015-07-14 07:32:33 +00:00
John Crispin
dc2c89c64c ar71xx: fix board name ordering
r46248 added case statements in the same places

Signed-off-by: John Crispin <blogic@openwrt.org>

SVN-Revision: 46274
2015-07-08 14:26:18 +00:00
John Crispin
d65916047b base-files: implemented basic GPIO control
Internal GPIO pins are used for PoE passthrough setups in multi-port
routers. This patch implemnets control over this hardware feature for
Ubiquiti Nanostations and TP-Link CPE510.

Signed-off-by: Lars Kruse <lists@sumpfralle.de>

SVN-Revision: 46271
2015-07-08 14:25:52 +00:00
John Crispin
227aafc4db ar71xx: Fix LED-to-phy mapping for EnGenius ESR1750.
wlan5g is phy0tpt and wlan2g phy1tpt.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

SVN-Revision: 46270
2015-07-08 14:25:45 +00:00
John Crispin
08790c5ee8 ar71xx: Add support for Cisco-Linksys WAP4410N
This patch adds support for the Cisco WAP4410N, an access point that uses the
AR9132 SoC. Web upgrades from stock are not yet possible, UART access required
for the initial flash.

Signed-off-by: Ryan A Young <rayoung@utexas.edu>

SVN-Revision: 46250
2015-07-07 18:06:39 +00:00
John Crispin
d535218230 ar71xx: add support for D-Link DIR-615 rev. Ix board
Based on trunk r46212.

Signed-off-by: Jaehoon You <teslamint@gmail.com>

SVN-Revision: 46248
2015-07-07 13:48:39 +00:00
John Crispin
055663201b ar71xx: Add Support for the Bitmain Antminer S3
This patch adds support for the Bitmain Antminer S3 Cryptocurrency Miner

http://wiki.openwrt.org/toh/bitmain/s3

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>

SVN-Revision: 46236
2015-07-07 13:46:54 +00:00
John Crispin
6fc2e94120 ar71xx: add support for ubnt rocket-m ti
rocket-m titanium is a device based on ar9344 with 802.11af poe.
It doesn't use the SoC wifi, instead it's using an ar9280 connected to
the pci bus. The gps version of the rocket-m ti is working, but
gps is untested. The gps is connected to the first serial port.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>

SVN-Revision: 46234
2015-07-07 13:46:38 +00:00
John Crispin
5740cf684c ar71xx: Fix WAN port location on EnGenius ESR1750 and EPG5000.
The designated blue WAN port on both devices has index 5, not 1.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

SVN-Revision: 46227
2015-07-07 13:45:30 +00:00
John Crispin
6a374f0062 ar71xx: add LED defaults for the EnGenius EPG5000
NB that wlan5g is phy0tpt and wlan2g phy1tpt.

Signed-off-by: Christian Beier <cb@shoutrlabs.com>

SVN-Revision: 46226
2015-07-07 13:45:20 +00:00
Felix Fietkau
b26077026f ar71xx: add support for ap143
Signed-off-by: Miaoqing Pan <miaoqing@codeaurora.org>

SVN-Revision: 46208
2015-07-07 08:06:05 +00:00
John Crispin
1f038e0678 ar71xx: add user-space support for EnGenius EPG5000.
Signed-off-by: Christian Beier <cb@shoutrlabs.com>

SVN-Revision: 46048
2015-06-18 18:21:41 +00:00
John Crispin
8399be545a ar71xx: add support for compex wpj531
tftpboot 0x80500000 openwrt-ar71xx-generic-wpj531-16M-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
erase 0x9f680000 +1
cp.b $fileaddr 0x9f030000 $filesize

Signed-off-by: Christian Mehlis <christian@m3hlis.de>

SVN-Revision: 46045
2015-06-18 18:21:15 +00:00
John Crispin
694dd581eb ar71xx: Add Support for the Bitmain Antminer S1
This patch adds support for the Bitmain Antminer S1 Cryptocurrency Miner

http://wiki.openwrt.org/toh/bitmain/s1

Signed-off-by: L. D. Pinney <ldpinney@gmail.com>
Acked-by: James Hilliard <james.hilliard1@gmail.com>

SVN-Revision: 46044
2015-06-18 18:21:05 +00:00
John Crispin
66950455b7 ar71xx: Add support for the Meraki MR12 & MR16
This patch is to add support for the Meraki MR12 and MR16 Access Points.
Currently everything is working, minus the 2nd NIC interface on the MR12
which is built into the SoC.

Signed-off-by: Chris R Blake <chrisrblake93 at gmail.com>

SVN-Revision: 45726
2015-05-23 15:27:22 +00:00
Felix Fietkau
5c5648f4b7 ar71xx: track the correct WAN interface on wnr2000-v4
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>

SVN-Revision: 45632
2015-05-08 12:23:40 +00:00
Felix Fietkau
6b6cc03cff ar71xx: fix LAN portmasks on wnr2000-v4
Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>

SVN-Revision: 45631
2015-05-08 12:23:35 +00:00
Felix Fietkau
a51f5cace4 ar71xx: use a common naming scheme for LEDS on wnr2000-v4
It is common that the router provider be used rather than product name.
One can see this in target/linux/ar71xx/base-files/etc/uci-defaults/01_leds

Signed-off-by: Michael J. Bazzinotti <mbazzinotti@gmail.com>

SVN-Revision: 45630
2015-05-08 12:23:27 +00:00
John Crispin
a34db67857 Add support for Ubiquiti Rocket M XW devices
This patch adds support for the XW version of the Rocket M series devices
manufactured by Ubiquiti, based on the Atheros AR9342 SoC.

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 45553
2015-04-21 12:42:13 +00:00
Luka Perkov
9d76de9771 ar71xx: add support for compex wpj344
Signed-off-by: Christian Mehlis <christian@m3hlis.de>
Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 45527
2015-04-20 20:47:48 +00:00
John Crispin
8f92e94a74 ar71xx: enable LEDs on Hornet-UB X2
None of the LEDs are enabled by default on the Hornet-UB X2 board
(the 16/64MB version of the Hornet-UB), because it uses a different
board-name ("hornet-ub-x2"); but hornet-ub and hornet-ub-x2 boards
are equivalent WRT their LEDs.

SIgned-off-by: Joshua Judson Rosen <jrosen@harvestai.com>

SVN-Revision: 45328
2015-04-09 10:32:08 +00:00
Gabor Juhos
0bd06aca20 ar71xx: add user-space support for RB911G-5HPacD
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>

SVN-Revision: 45300
2015-04-07 20:04:14 +00:00
John Crispin
85cceb5dd0 ar71xx: add user-space support for the OpenMesh OM5P-AN
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>

SVN-Revision: 44862
2015-03-17 09:43:31 +00:00
John Crispin
abdf788610 ar71xx: fix switched WLAN LEDs on TP-LINK Archer C5/C7
ath10k is loaded before ath9k, so the 5GHz adapter becomes phy0.

Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>

SVN-Revision: 44659
2015-03-11 15:55:06 +00:00
Luka Perkov
b065411a85 ar71xx: add support for compex wpj558
OpenWrt can be flashed with following uboot commands:

tftpboot 0x80500000 openwrt-ar71xx-generic-wpj558-16M-squashfs-sysupgrade.bin
erase 0x9f030000 +$filesize
cp.b $fileaddr 0x9f030000 $filesize

Signed-off-by: Luka Perkov <luka@openwrt.org>

SVN-Revision: 44620
2015-03-06 14:41:57 +00:00
John Crispin
9358a8a798 ar71xx: TL-WA7210n v2 support
This patch adds support for TP-Link TL-WA7210n[0]

[0] http://www.tplink.com/en/products/details/?model=TL-WA7210N

Signed-off-by: Hendrik Frenzel <hfrenzel@scunc.net>

SVN-Revision: 44526
2015-02-24 12:00:50 +00:00
John Crispin
bd5635770c ar71xx: Add user-space support for TP-Link MR12U v1
This patch adds user-space support for the TL-MR12U board based on the mr13u patches.

Signed-off-by: Daniel Petre <daniel.petre@gmail.com>

SVN-Revision: 44426
2015-02-13 07:29:03 +00:00
John Crispin
de8d6e447c ar71xx: ZyXEL NBG6716 led/buttons cleanup
ZyXEL NBG6716 led/buttons cleanup
 - improper numbered leds
 - improper named buttons

Signed-off-by: Marcin Mikolajczak <gr4ffy at gmail.com>

SVN-Revision: 44417
2015-02-12 08:07:27 +00:00
John Crispin
a5b60de253 ar71xx: Add support for MERCURY MAC1200R
This patch adds support for MERCURY MAC1200R, a dual band 802.11bgn + 802.11ac
router based on the AR9344, with QCA988x ath10k radio and 5 Fast Ethernet ports

Signed-off-by: Roger Pueyo Centelles <roger.pueyo@guifi.net>

SVN-Revision: 44359
2015-02-09 12:16:51 +00:00