Jonas Gorski
0f08442ded
brcm63xx: move DSL-275XB to DT
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45168
2015-03-30 20:21:15 +00:00
Jonas Gorski
f77b446051
brcm63xx: move bcm6318 reference boards to DT
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45167
2015-03-30 20:21:07 +00:00
Jonas Gorski
f644c1581a
brcm63xx: move VG50 to DT
...
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45166
2015-03-30 20:21:01 +00:00
Jonas Gorski
f973580488
brcm63xx: move V2110 to DT
...
Also readd image generation which was accidentally dropped in r43364.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45165
2015-03-30 20:20:49 +00:00
Jonas Gorski
d8ba40cfcd
brcm63xx: use relocate to move the kernel back to start of ram
...
Appearently the kernel only uses kernel above it, so moving it to an
higher address causes a lot of unavailable memory (#19327 ).
Also move the on-flash kernel to 0x80a0000, as newer CFEs don't like
uncompressing there (net-booting an ELF kernel is fine, though).
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45164
2015-03-30 20:20:15 +00:00
Jonas Gorski
8353a3bd45
generic: relocate: make the cacheline size configurable
...
Different targets have different cache line sizes.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45163
2015-03-30 20:20:10 +00:00
Jonas Gorski
703c41cf01
ramips: move relocating loader to common location
...
Allow other targets to use it, too.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 45162
2015-03-30 20:20:08 +00:00
Gabor Juhos
3129f0c6f2
ar71xx/mikrotik: re-enable 4KiB flash sector erase
...
The setting has been lost during the transition to 3.18.
The CONFIG_M25PXX_PREFER_SMALL_SECTOR_ERASE option is not
available anymore, so use CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
instead.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45161
2015-03-30 19:57:52 +00:00
Gabor Juhos
62a8665fea
ar71xx: re-enable AR8216_PHY_LEDS
...
The setting has been lost during the transition to 3.18.
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45160
2015-03-30 18:12:54 +00:00
Gabor Juhos
18f6a34113
ar71xx: sync kernel config
...
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 45159
2015-03-30 18:12:50 +00:00
Steven Barth
23db1800f8
nftables: bump to 2015-03-24
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45158
2015-03-30 17:04:14 +00:00
John Crispin
67bf89324d
ustream-ssl: properly handle return codes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45157
2015-03-30 13:17:27 +00:00
Felix Fietkau
6d7dff8596
image.mk: fix initramfs kernel build instructions leaking across device sections
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45156
2015-03-30 13:03:58 +00:00
John Crispin
2b925161d8
xburst: add missing symbol
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45155
2015-03-30 12:47:51 +00:00
John Crispin
d5c913705f
modules: more xen modules have been moved
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45154
2015-03-30 12:45:01 +00:00
John Crispin
6aff392bff
uhttpd: properly handle return codes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45153
2015-03-30 12:35:13 +00:00
John Crispin
fd91040704
rpcd: properly handle return codes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45152
2015-03-30 12:35:05 +00:00
John Crispin
d6af8e2175
ubox: properly handle return codes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45151
2015-03-30 12:34:56 +00:00
John Crispin
2268d15948
procd: properly handle return codes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45150
2015-03-30 12:34:42 +00:00
John Crispin
08b882fbae
fstools: properly handle return codes
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45149
2015-03-30 12:33:05 +00:00
Steven Barth
24be294d8e
odhcpd: fix default dhcpv6 behavior for non-/64
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45148
2015-03-30 08:53:22 +00:00
Steven Barth
0a0dec1c4a
odhcpd: fix musl build, change default DHCPv6 behavior
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45147
2015-03-30 08:49:47 +00:00
Steven Barth
bbe5dc48a2
odhcp6c: musl fixes (thanks Felix)
...
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 45146
2015-03-30 08:49:20 +00:00
Steven Barth
7e7f329ccf
kernel/generic: (try) fixing MAP-E patch broken in 4.0
...
Now it at least compiles, otherwise untested.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 45145
2015-03-30 08:48:51 +00:00
Rafał Miłecki
1751676c8b
brcm47xx: convert Netgear WNDR3700 V3 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45144
2015-03-29 19:53:11 +00:00
Rafał Miłecki
8e4b74b9fe
brcm47xx: convert Linksys E1200 V2 to the new image building system
...
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 45143
2015-03-29 18:15:38 +00:00
John Crispin
274747da1a
modules: xen-fbfront.ko has moved
...
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45142
2015-03-29 16:11:28 +00:00
John Crispin
530e70c753
ubox: update to latest git HEAD
...
the return code of a pipe() was not checked properly
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45141
2015-03-29 15:38:21 +00:00
John Crispin
23d37c1208
ar71xx: fix model string detection on NETGEAR WNDR3700/3800/WNDRMAC
...
There were a few issues with the existing code to detect the model string:
* Always using the string starting with byte 56 would cut off the W of WNDR when
the ID starts with 29763654+16+64 instead of 29763654+16+128
* The string contained garbage after the zero byte instead of cutting it off
after the zero (which wasn't always visible using busybox tools, but could
confuse other scripts)
Tested on a WNDR3700v1 and a WNDR3700v2 using the new 29763654+16+64 ID in the
ART. Furthermore, tested against ART dumps of a WNDR3700v2 using the old
$'\xff...' value and a WNDR3800.
The [ -z "$model" ] check was dropped as there is no way to actually hit this
unless no ART partition is found at all.
The awk command was carefully crafted to work both with gawk and the (horribly
broken) busybox awk.
Fixes #18992 .
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45140
2015-03-29 12:58:01 +00:00
John Crispin
8d8f01088a
ubox: update to latest git HEAD
...
fixes log levels
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 45139
2015-03-29 12:57:32 +00:00
Imre Kaloz
ebf1e2461a
x86_64: add description, maintainership
...
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 45138
2015-03-29 12:17:39 +00:00
Felix Fietkau
4ecc5c8ffe
uclibc: backport an upstream i386 syscall fix
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45137
2015-03-29 10:43:07 +00:00
Felix Fietkau
3da7fe6e5b
kernel: remove useless AddDepends/rtc abstraction
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45136
2015-03-29 08:12:50 +00:00
Felix Fietkau
13e7b6d77d
kernel: remove useless AddDepends/input abstraction
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45135
2015-03-29 08:12:39 +00:00
Felix Fietkau
0b39a6d4e9
kernel: remove useless AddDepends/hid abstraction
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45134
2015-03-29 08:12:31 +00:00
Felix Fietkau
b2f3e852d0
kernel: remove useless AddDepends/crc16 abstraction
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45133
2015-03-29 08:12:23 +00:00
Felix Fietkau
661f05262b
arm64: remove bogus CONFIG_WIRELESS/CONFIG_WLAN overrides
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45132
2015-03-29 07:36:17 +00:00
Felix Fietkau
ed1e783aa1
kernel: only run kernel module list through version filter where version specific items are present - cuts package/kernel/linux/compile time in half
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45131
2015-03-29 07:35:42 +00:00
Felix Fietkau
d2030482b3
scripts/ipkg: remove file, it is obsolete
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45130
2015-03-29 07:35:36 +00:00
Felix Fietkau
55c5d10ca9
tools: replace ipkg-utils with a reduced ipkg-build variant in scripts/
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45129
2015-03-29 07:35:26 +00:00
Felix Fietkau
61dd3c8013
build: make postinst/prerm scripts executable
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45128
2015-03-29 07:35:19 +00:00
Luka Perkov
7002f6326e
include: remove trailing whitespaces
...
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45127
2015-03-29 07:29:18 +00:00
Felix Fietkau
0b0315a1f2
px5g-standalone: change PKG_NAME to avoid directory conflict with px5g
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45126
2015-03-29 06:03:02 +00:00
Luka Perkov
1e2f88b17b
imx: add initial version of 3.18 support
...
This is build tested only.
Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 45125
2015-03-29 05:48:56 +00:00
Felix Fietkau
9d9b2ddf30
kernel: make crypto-ctr depend on crypto-iv
...
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 45124
2015-03-29 05:20:58 +00:00
Felix Fietkau
7ae1c1b4e8
linux: modules: crypto: adds ccm package
...
This patch adds support crypto-ccm modules support.
Signed-off-by: Varka Bhadram <varkab@cdac.in>
SVN-Revision: 45123
2015-03-29 05:20:50 +00:00
Felix Fietkau
c901f4fcbb
netfilter: add missing module/symbol
...
ipv4 symbol was added but ipv6 symbol is missing
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45122
2015-03-29 05:16:13 +00:00
Felix Fietkau
3a4cd5cdc1
kernel: remove mp-alg
...
from upstream
commit title: "[IPV4]: The scheduled removal of multipath cached routing support."
removed in Kernel 2.6.23 (2007)
Reasons: very buggy, no maintainer, no fixes
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45121
2015-03-29 05:15:58 +00:00
Felix Fietkau
26ebaa485a
kernel: video.mk: [media] sn9c102: remove deprecated driver
...
driver in staging since 3.14
removed upstream in 3.17
from upstream commit message:
Most webcams covered by this driver are now supported by gspca.
Nobody has the hardware or is willing to convert the remaining devices to gspca.
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 45120
2015-03-29 05:15:51 +00:00
Felix Fietkau
a5422864f5
build: fix CMake assembly builds with ccache
...
CMAKE_ASM_COMPILER is automatically set to CMAKE_C_COMPILER by CMake, but
CMAKE_C_COMPILER_ARG1 is lost. This causes assembly builds to fail when ccache
is enabled (for example the package fastd on x86).
Fix this by explicitly defining CMAKE_ASM_COMPILER and CMAKE_ASM_COMPILER_ARG1.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 45119
2015-03-29 05:12:58 +00:00