Commit graph

114 commits

Author SHA1 Message Date
Felix Fietkau
f5fba5bc3c Asus WL-330gE Support
Here is support for the compact Asus WL-330gE. It uses that all-in-one
5354 Broadcom chip that's also in the WL-520gU, so I assume USB
support can be soldered on. I've yet to open up the device, though.
Initial flashing is done through the CFE failsafe mode like on other
Asus devices, where you boot holding the reset button, the power LED
flashes, and you tftp an image.

Signed-off-by: David Cooper <dave@kupesoft.com>

SVN-Revision: 14624
2009-02-22 18:45:39 +00:00
Felix Fietkau
f57651b042 fix a memory corruption bug in the linux 2.4 version of b44
SVN-Revision: 13955
2009-01-10 00:55:38 +00:00
Felix Fietkau
4f5b45e3c2 b44: fix misalignment and space-saving in rx packet handling (significant throughput and cpu load improvement)
SVN-Revision: 13946
2009-01-09 03:06:37 +00:00
Felix Fietkau
59a00d52a9 make broadcom-wl robust against implicit kernel config changes (e.g. netfilter), upgrade it from minor version .2 to .3 (adds fixed bssid support for ad-hoc)
SVN-Revision: 13912
2009-01-07 04:26:14 +00:00
Andy Boyett
9f8c82da09 Add hostapd-mini to default images where applicable
SVN-Revision: 13819
2009-01-02 05:12:46 +00:00
Felix Fietkau
f47a4a58c5 fix sysupgrade support for brcm-2.4 and brcm47xx make mtd refresh based config append optional (leave enabled on x86)
SVN-Revision: 12657
2008-09-23 11:05:54 +00:00
Imre Kaloz
88041e0f1b final fix for BCM5354 USB cores, hopefully
SVN-Revision: 12499
2008-09-02 11:28:57 +00:00
Florian Fainelli
5cf0db54c6 Package ip6t_limit and ip6t_frag for 2.4 kernels (#3760)
SVN-Revision: 12276
2008-08-11 06:38:48 +00:00
Gabor Juhos
9b2e1bdd8d fix Dell TrueMobile 2300 v1/v2 detection and network configuration (closes #2788)
SVN-Revision: 11935
2008-07-26 16:10:44 +00:00
Travis Kemen
4e9e2cba40 fix sierra patches
SVN-Revision: 11909
2008-07-22 15:16:43 +00:00
Travis Kemen
8894411b60 This is the Linksys-ported driver from WRT54G3G-ST_v2.00.9_US.tgz, re-based against 2.4.35 and repaired for obvious breakage (didn't use its device table, etc.).
Changes from Linksys tree:
 - Remove 'vendor' and 'product' parameters; these aren't used in the
mainstream driver and seem to only have served to break it.
 - Remove bogus 'sierra_device_ids' table, used with above.
 - Changed references to 'sierra_device_ids' back to id_table
 - Changed non-standard CONFIG_USB_SERIAL_SIERRA_3G (line 886) to
current module standard CONFIG_USB_SERIAL_SIERRAWIRELESS
 - Added #include to enable pl2303 hack to remain until I can figure
out if it's still necessary.
Signed-off-by:  RB <aoz.syn@gmail.com>

SVN-Revision: 11899
2008-07-21 20:40:14 +00:00
Travis Kemen
1a47f8142d This series of patches closes the support gap on one of the explicitly supported platforms (WRT54G3G) by adding direct support for the Sierra Wireless 3G modems. Signed-off-by: RB <aoz.syn@gmail.com>
SVN-Revision: 11898
2008-07-21 20:36:16 +00:00
Felix Fietkau
20937ce81a (5/6) bcm57xx: bcm4785 incomplete reboot
I noticed my wrt350n would not reliably reboot after entering
the reboot command.  I found this code in the source for the
wrt600n.  It corrects the problem, and the wrt350n reboots
reliably now.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11470
2008-06-15 11:10:43 +00:00
Felix Fietkau
9621d872ca (3/6) bcm57xx: preinit
This patch allows the bcm57xx module to work correctly with failsafe mode.

insmod doesn't return an error when a module loads but doesn't detect a switch.
I added the check_module function to load the module, then make sure
it doesn't just exit immediately.  This allows preinit to only attempt to
load the bcm57xx module when switch-robo and switch-adm dont detect a switch.

The activate_gpio parameter to bcm57xx simply instructs the module to attempt
to activate the switch via gpio before probing for the switch.

Tested on wrt350n.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11468
2008-06-15 11:10:13 +00:00
Felix Fietkau
f9ad520e37 (2/6) bcm57xx: netconfig
Update the netconfig script to support boardtype 0x478.  I've tested this
on the wrt350n, hopefully it will match the 600n as well.

Signed-off-by: Ben Pfountz <netprince (at) vt (dot) edu>

SVN-Revision: 11467
2008-06-15 11:09:49 +00:00
Peter Denison
473d5705bd Include missing part of r11275. Fix fw_argX from CFE
SVN-Revision: 11340
2008-06-03 19:29:53 +00:00
Peter Denison
c9f6d43927 Don't nuke fw_argX from CFE - Thanks jhansen
SVN-Revision: 11275
2008-05-27 15:01:07 +00:00
Gabor Juhos
8932b397b8 refresh kernel patches
SVN-Revision: 11214
2008-05-19 13:45:06 +00:00
Travis Kemen
0d25337129 This patch lets netconfig support the asus wl-500w. Signed-off-by: Ben Pfountz <netprince@vt.edu>
SVN-Revision: 11070
2008-05-08 01:30:14 +00:00
Andy Boyett
0ed1824fa1 Add a generic Broadcom USB profile.
SVN-Revision: 10695
2008-03-31 08:05:30 +00:00
Andy Boyett
a2ccc5b790 Change WL500gP profile to use uhci-iv (#1589)
SVN-Revision: 10694
2008-03-31 08:05:13 +00:00
Andy Boyett
c15de3860c Add support for the WL-500gP v2
SVN-Revision: 10693
2008-03-31 08:04:56 +00:00
Felix Fietkau
85a1127f2d add wrt350n image file
SVN-Revision: 10205
2008-01-16 03:39:59 +00:00
Florian Fainelli
a4ca693c7e Add back Sitecom WL-105b support
SVN-Revision: 10142
2008-01-08 14:27:48 +00:00
Felix Fietkau
178721f76b update brcm-2.4 to 2.4.35.4, integrate new broadcom system code, update broadcom-wl to a contributed version (v4.150.10.5) - no bcm57xx support yet, will follow shortly
SVN-Revision: 10137
2008-01-06 19:28:07 +00:00
Imre Kaloz
f031f4c7dc bump version numbers of Linksys images
SVN-Revision: 10097
2008-01-03 21:28:56 +00:00
Florian Fainelli
dc36fccfdc Add bcm5354 patch from #2754
SVN-Revision: 9684
2007-12-09 15:51:45 +00:00
Felix Fietkau
bf0dd24627 create broadcom initramfs images and move the lzma decompressor area a bit further
SVN-Revision: 9556
2007-11-16 03:11:17 +00:00
Felix Fietkau
1bca0cc517 make the image filenames a bit shorter
SVN-Revision: 9533
2007-11-10 23:08:11 +00:00
Felix Fietkau
fe6294e21c update wrt54g3g pattern version, add wrt54g3g-em pattern (#2663)
SVN-Revision: 9523
2007-11-10 15:45:38 +00:00
Jens Muecke
fcdf364d10 fix missing CONFIG_USB_BLUETOOTH issue
SVN-Revision: 9494
2007-11-03 22:32:54 +00:00
Gabor Juhos
438dfe5c6f get rid of per-profile base-files
SVN-Revision: 9069
2007-09-29 14:27:54 +00:00
Gabor Juhos
a3c80a1e6e fix vlan configuration on Dell TrueMobile 2300
SVN-Revision: 9015
2007-09-25 08:34:30 +00:00
Nicolas Thill
1e758b6e05 refresh brcm-2.4 kconfig
SVN-Revision: 8949
2007-09-22 15:06:15 +00:00
Felix Fietkau
236d7e62ca clean up jffs2 config options
SVN-Revision: 8848
2007-09-19 20:58:16 +00:00
Florian Fainelli
1d7dc11649 Add preliminary support for sysupgrade on brcm
SVN-Revision: 8718
2007-09-09 19:18:02 +00:00
Felix Fietkau
87a88cebc7 adapt profiles for subtarget changes
SVN-Revision: 8695
2007-09-08 20:04:43 +00:00
Felix Fietkau
a9d683ca91 major target cleanup. it is now possible to have subtargets that can override many target settings, including arch - merge adm5120, adm5120eb. target profiles still need to be adapted for subtargets
SVN-Revision: 8694
2007-09-08 19:55:42 +00:00
Felix Fietkau
75f1024d48 fix pci init for brcm-2.4 with atheros wifi cards
SVN-Revision: 8690
2007-09-08 13:39:34 +00:00
Felix Fietkau
22742b2d7e remove some obsolete files
SVN-Revision: 8654
2007-09-06 16:40:36 +00:00
Felix Fietkau
56231056ea strip the kernel version suffix from target directories, except for brcm-2.4 (the -2.4 will be included in the board name here). CONFIG_LINUX_<ver>_<board> becomes CONFIG_TARGET_<board>, same for profiles.
SVN-Revision: 8653
2007-09-06 16:27:37 +00:00
Mike Baker
7ab328b133 workaround for timer glitch on some boards
SVN-Revision: 8483
2007-08-25 13:18:58 +00:00
Mike Baker
c6e6780624 fix wan configuration on wr850g v2/v3
SVN-Revision: 8482
2007-08-25 12:27:01 +00:00
Florian Fainelli
be8bb854f9 Add usb-keyspan modules (#2229)
SVN-Revision: 8450
2007-08-21 09:42:25 +00:00
Felix Fietkau
c6bc77ea36 build system cleanup/restructuring as described in http://lists.openwrt.org/pipermail/openwrt-devel/2007-August/001159.html
SVN-Revision: 8362
2007-08-07 00:04:25 +00:00
Felix Fietkau
114b9a8fb6 add failsafe support for atheros-2.6 (#1501) - only works with ar5315+ at the moment
SVN-Revision: 7870
2007-07-04 04:35:44 +00:00
Felix Fietkau
5e7cb507cd move parts of the failsafe code to the generic base-files - will be used on atheros as well as soon as i've added support for it
SVN-Revision: 7810
2007-06-30 21:09:02 +00:00
Felix Fietkau
7e4f2dbf66 make the broadcom firmware image code more sane and also fix jffs2-256k related bugs (#1888)
SVN-Revision: 7731
2007-06-25 15:36:31 +00:00
Felix Fietkau
8c41e51e92 fix failsafe on broadcom, send netlink events in diag when running linux 2.6
SVN-Revision: 7722
2007-06-25 08:32:25 +00:00
Florian Fainelli
1c7ab50199 Really apply the esfq patch
SVN-Revision: 7623
2007-06-13 19:12:44 +00:00