KumiSystems/openwrtv3
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity
19263 commits 1 branch 0 tags 154 MiB
Commit graph

7455 commits

Author SHA1 Message Date
Florian Fainelli
c093c9df34 fix typo, load ip17xx switch module 
SVN-Revision: 29039
 2011-11-13 18:41:26 +00:00
Gabor Juhos
368bbc510b ar71xx: enable has_gbit flag on AR724{0,1} 
SVN-Revision: 29026
 2011-11-13 17:36:36 +00:00
Gabor Juhos
15d7016c9f ar71xx: fixup onboard PCIe chip registration on the DB120 board 
SVN-Revision: 29022
 2011-11-13 12:48:03 +00:00
Gabor Juhos
f623066e60 ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed 
SVN-Revision: 29021
 2011-11-13 12:48:01 +00:00
Gabor Juhos
d2316b2a45 ar71xx: ag71xx: add support for getting switch port link status 
SVN-Revision: 29017
 2011-11-13 11:27:04 +00:00
Gabor Juhos
d0db89133c ar71xx: remove mii_ctrl resources of the ethernet devices 
SVN-Revision: 29016
 2011-11-13 11:27:03 +00:00
Gabor Juhos
34015ed6e8 ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx 
SVN-Revision: 29015
 2011-11-13 11:27:01 +00:00
Gabor Juhos
2d882cff23 ar71xx: ag71xx: remove unused mii_cfg related functions and defines 
SVN-Revision: 29014
 2011-11-13 11:27:00 +00:00
Gabor Juhos
538a9493b9 ar71xx: set MII interface speed from the set_speed callbacks 
SVN-Revision: 29013
 2011-11-13 11:26:59 +00:00
Gabor Juhos
93cd46be13 ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data 
Also rename the corresponding callback functions.

SVN-Revision: 29012
 2011-11-13 11:26:57 +00:00
Gabor Juhos
9579bb4267 ar71xx: ag71xx: remove MII interface setup code 
SVN-Revision: 29011
 2011-11-13 11:26:56 +00:00
Gabor Juhos
da64ce8603 ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode 
SVN-Revision: 29010
 2011-11-13 11:26:54 +00:00
Gabor Juhos
0112153a0e ar71xx: fix occasional kernel hangs during boot on AR934x 
The patch taken from the linux-mips mailing list.

The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.

This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.

SVN-Revision: 29009
 2011-11-13 11:26:52 +00:00
Gabor Juhos
1afc76ea13 ar71xx: refresh kernel patches 
SVN-Revision: 29008
 2011-11-13 11:26:51 +00:00
Jonas Gorski
d8acb75009 linux: update 3.1 to 3.1.1 
SVN-Revision: 29007
 2011-11-13 10:48:05 +00:00
John Crispin
a8797d0de6 lantiq: add uci-defaults code for handling leds 
SVN-Revision: 29004
 2011-11-12 23:40:21 +00:00
John Crispin
832e02cd77 lantiq: add /lib/lantiq.sh and make hotplug handlers use it 
SVN-Revision: 29003
 2011-11-12 23:40:16 +00:00
John Crispin
5dcbbf0160 lantiq: rename leds 
SVN-Revision: 29002
 2011-11-12 23:40:12 +00:00
John Crispin
d84b7596d9 lantiq: split compat headers out of bsp header patch 
SVN-Revision: 29001
 2011-11-12 23:40:07 +00:00
John Crispin
2cff80f015 lantiq: adds hotplug handler for loading rt2x00 firmware 
SVN-Revision: 29000
 2011-11-12 23:40:01 +00:00
John Crispin
3660c51c40 lantiq: adds hotplug handler for handling buttons and makes w303v work with it 
SVN-Revision: 28999
 2011-11-12 23:39:56 +00:00
John Crispin
4248705108 lantiq: cleanup default package selection 
SVN-Revision: 28998
 2011-11-12 23:39:51 +00:00
John Crispin
eb20ab87e6 lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it 
SVN-Revision: 28994
 2011-11-12 18:41:15 +00:00
Gabor Juhos
bbfaaeffd6 kernel: ar8216: add support for the AR8236 switch 
SVN-Revision: 28993
 2011-11-12 14:09:52 +00:00
Gabor Juhos
ecb3690d0a kernel: ar8216: move port vlan setup into a separate function 
SVN-Revision: 28992
 2011-11-12 14:09:50 +00:00
Gabor Juhos
5ad763075e ar71xx: use the button for WPS control on the DB120 
SVN-Revision: 28990
 2011-11-12 12:50:20 +00:00
Gabor Juhos
4555be2bec ar71xx: register the second ethernet interface on the DB120 board 
SVN-Revision: 28989
 2011-11-12 12:50:19 +00:00
Gabor Juhos
368c6605a0 ar71xx: implement SoC specific phy interface setup 
SVN-Revision: 28988
 2011-11-12 12:50:18 +00:00
Gabor Juhos
21d317b9cc ar71xx: move phy interface setup into a separate function 
SVN-Revision: 28987
 2011-11-12 12:50:16 +00:00
Gabor Juhos
aff0c84ffa ar71xx: register both MDIO bus on the DB120 board 
SVN-Revision: 28986
 2011-11-12 12:09:59 +00:00
Gabor Juhos
b144249108 ar71xx: add AR934X specific MDIO registration code 
SVN-Revision: 28985
 2011-11-12 12:09:56 +00:00
Gabor Juhos
f835106c8c ar71xx: add a secondary mdio bus 
SVN-Revision: 28984
 2011-11-12 12:09:54 +00:00
Gabor Juhos
90a42da270 ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_* 
SVN-Revision: 28983
 2011-11-12 12:09:50 +00:00
Gabor Juhos
9daa2149fd ar71xx: add an id argument to ar71xx_add_device_mdio 
SVN-Revision: 28982
 2011-11-12 12:09:48 +00:00
Gabor Juhos
b07b687aec ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa 
SVN-Revision: 28981
 2011-11-12 12:09:42 +00:00
Gabor Juhos
a9216bb76e ar71xx: add AR934x specific USB setup 
SVN-Revision: 28980
 2011-11-12 10:54:20 +00:00
Gabor Juhos
346e44105a ar71xx: register the first ethernet interface on the DB120 board 
SVN-Revision: 28979
 2011-11-12 10:54:18 +00:00
Gabor Juhos
b1ba5e2f3d ar71xx: allow to register ethernet interfaces for AR934X 
SVN-Revision: 28978
 2011-11-12 10:54:17 +00:00
Gabor Juhos
2f9e535e89 ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered 
SVN-Revision: 28977
 2011-11-12 10:54:16 +00:00
Gabor Juhos
e962b07c8b ar71xx: add AR934X specific bootstrap and reset register bits 
SVN-Revision: 28976
 2011-11-12 10:54:15 +00:00
Gabor Juhos
d461fdd519 ar71xx: add diag support for the DB120 board 
SVN-Revision: 28975
 2011-11-12 10:54:10 +00:00
Gabor Juhos
d8db8e94c8 ar71xx: fix GPIO direction setup for AR934x 
SVN-Revision: 28974
 2011-11-12 10:54:09 +00:00
Gabor Juhos
43e993e5f5 ar71xx: fix AR934X clock frequency calculation 
SVN-Revision: 28973
 2011-11-12 10:54:08 +00:00
Gabor Juhos
8687fc3e41 ar71xx: generate ubootenv from uci-defaults instead of providing defconfig 
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28971
 2011-11-12 10:54:04 +00:00
John Crispin
fda4ee22a0 lantiq: improve falcon package selection 
SVN-Revision: 28962
 2011-11-11 21:59:11 +00:00
John Crispin
e1dc73be90 lantiq: fix breakage introduced in 3.1 bump 
SVN-Revision: 28961
 2011-11-11 21:59:01 +00:00
Jo-Philipp Wich
be49daffc8 base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli 
SVN-Revision: 28933
 2011-11-10 12:16:41 +00:00
Jonas Gorski
f53128f79b target: linux: mtd: fix MTDREFRESH to an arbitrary high number 
To make the ioctl number "stable", use an arbitrary high number to prevent
conflicts with new mtd ioctls that would push MTDREFRESH's number.

Also make mtd use the in-kernel mtd headers.

SVN-Revision: 28893
 2011-11-09 21:16:36 +00:00
Felix Fietkau
7a2efd8c28 ar71xx: remove dead code 
SVN-Revision: 28851
 2011-11-08 00:33:20 +00:00
Felix Fietkau
94309039b7 ar71xx: on ar7240, exclude ports from their own port vlan destination mask 
SVN-Revision: 28850
 2011-11-08 00:33:15 +00:00
Felix Fietkau
b06efd636a kernel: add a top level menuconfig option for enabling lockdep 
SVN-Revision: 28848
 2011-11-08 00:32:57 +00:00
Gabor Juhos
87704b8078 ar71xx: create TL-WA901ND network config from uci-defaults 
SVN-Revision: 28833
 2011-11-07 21:44:24 +00:00
Gabor Juhos
09fdfa444f ar71xx: create ALL0258N network config from uci-defaults 
SVN-Revision: 28832
 2011-11-07 21:44:23 +00:00
Gabor Juhos
63348f5fed ar71xx: create NBG{460N,550N,550NH} network config from uci-defaults 
SVN-Revision: 28831
 2011-11-07 21:44:20 +00:00
Gabor Juhos
c3692c8331 ar71xx: create WZR-HP-G300NH network config from uci-defaults 
SVN-Revision: 28830
 2011-11-07 21:44:17 +00:00
Gabor Juhos
ee1a07a11d ar71xx: create RB-493G network config from uci-defaults 
SVN-Revision: 28829
 2011-11-07 21:44:12 +00:00
Gabor Juhos
d82d063d81 ar71xx: create TL-WR1043ND network config from uci-defaults 
SVN-Revision: 28828
 2011-11-07 21:44:11 +00:00
Gabor Juhos
68be590894 ar71xx: create WRT160NL network config from uci-defaults 
SVN-Revision: 28827
 2011-11-07 21:44:09 +00:00
Gabor Juhos
83901e47c9 ar71xx: create PB92 network config from uci-defaults 
SVN-Revision: 28826
 2011-11-07 21:44:08 +00:00
Gabor Juhos
22ab9fc9ad ar71xx: create DIR-825-B1 network config from uci-defaults 
SVN-Revision: 28825
 2011-11-07 21:44:07 +00:00
Gabor Juhos
e866ba5753 ar71xx: create TL-WR{841N-v1,941ND} network config from uci-defaults 
SVN-Revision: 28824
 2011-11-07 21:44:03 +00:00
Gabor Juhos
9298c7afe5 ar71xx: create RB-450 network config from uci-defaults 
SVN-Revision: 28823
 2011-11-07 21:44:02 +00:00
Gabor Juhos
ac256f97bd ar71xx: create RB-450G, RouterStation Pro network config from uci-defaults 
SVN-Revision: 28822
 2011-11-07 21:44:01 +00:00
Gabor Juhos
944ac3f6cf ar71xx: create RB-433{,U} network config from uci defaults 
SVN-Revision: 28821
 2011-11-07 21:43:58 +00:00
Gabor Juhos
6e8390ae6c ar71xx: create even more network configs from the uci-defaults script 
Create the default network configuration dynamically for the
AR724x/AR9331 boards. Some other boards are using the same
configuration, so convert those as well.

SVN-Revision: 28820
 2011-11-07 21:43:56 +00:00
Gabor Juhos
b62560413a ar71xx: create more network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
swapped eth0, eth1 interfaces.

SVN-Revision: 28819
 2011-11-07 21:43:54 +00:00
Gabor Juhos
6c92b26bac ar71xx: create a bunch of network configs from the uci-defaults script 
Create the default network configuration dynamically for the boards with
a single ethernet interface.

SVN-Revision: 28818
 2011-11-07 21:43:52 +00:00
Gabor Juhos
0a8e5dbf7b ar71xx: create generic network config from an uci-defaults script 
SVN-Revision: 28817
 2011-11-07 21:43:51 +00:00
Gabor Juhos
54c034ae7a ar71xx: remove AP81 defconfig, it is the same as the generic config 
SVN-Revision: 28816
 2011-11-07 21:34:33 +00:00
Gabor Juhos
5b6cc3eb9f ar71xx: change generated Buffalo firmware versions 
With version 1.76 the upgrade may fail with newer Buffalo firmwares with
a message like this:
"You can not update the firmware because the firmware version is earlier
than 1.82. Please use 1.82 or later version for firmware update."

SVN-Revision: 28815
 2011-11-07 21:34:32 +00:00
Imre Kaloz
cc2cf8f3d5 update 3.1 patches 
SVN-Revision: 28814
 2011-11-07 21:13:13 +00:00
Imre Kaloz
c4bc2552a3 update arm mach-types 
SVN-Revision: 28813
 2011-11-07 21:12:26 +00:00
Gabor Juhos
eb9ef60e2d ar71xx: enable sysupgrade on the WHR-G301N and WHR-HP-GN boards 
SVN-Revision: 28812
 2011-11-07 20:25:00 +00:00
Gabor Juhos
8456840d82 ar71xx: wrap long lines in the upgrade script 
SVN-Revision: 28811
 2011-11-07 20:24:59 +00:00
Gabor Juhos
c60baf78ce ar71xx: fix WHR-HP-G300N firmware partition offset 
SVN-Revision: 28810
 2011-11-07 20:24:57 +00:00
Gabor Juhos
b27254a2c5 ar71xx: add default network configuration for the WHR-HP-GN 
SVN-Revision: 28807
 2011-11-07 13:32:43 +00:00
Gabor Juhos
034b2b7cde ar71xx: build image for the Buffalo WHR-HP-GN 
SVN-Revision: 28806
 2011-11-07 12:59:11 +00:00
Gabor Juhos
a801d620a7 ar71xx: add support for the Buffalo WHR-HP-GN board 
SVN-Revision: 28805
 2011-11-07 12:59:10 +00:00
Gabor Juhos
0d9ae0a036 ar71xx: build image for the Buffalo WHR-G301N 
SVN-Revision: 28804
 2011-11-07 12:59:08 +00:00
Gabor Juhos
4509af17ed ar71xx: add support for the Buffalo WHR-G301N board 
SVN-Revision: 28803
 2011-11-07 12:59:07 +00:00
Gabor Juhos
63784ea2bc ar71xx: fix WHR-HP-G300N image generation 
SVN-Revision: 28802
 2011-11-07 12:59:05 +00:00
Gabor Juhos
b3b21cb3bf ar71xx: enable WHR-HP-G300N support in kernel config 
SVN-Revision: 28801
 2011-11-07 12:59:04 +00:00
Gabor Juhos
4aace1e2e3 ar71xx: fix WHR-HP-G300N MTD partitions 
SVN-Revision: 28800
 2011-11-07 12:59:03 +00:00
Michael Büsch
05ce57c005 omap24xx: Add cbus tahvo locking fix. 
SVN-Revision: 28767
 2011-11-05 16:10:18 +00:00
Michael Büsch
6288ac7ed4 omap24xx: Fix n810bm compilation 
SVN-Revision: 28766
 2011-11-05 16:01:53 +00:00
Gabor Juhos
297ac9a7f1 kernel: swconfig: add a missing unlock in error path 
SVN-Revision: 28753
 2011-11-04 14:38:31 +00:00
Jo-Philipp Wich
d6f02b62d4 add timeserver config to target specific system configs as well 
SVN-Revision: 28750
 2011-11-04 12:53:35 +00:00
Felix Fietkau
82bd0a43f1 kernel: merge regression fixes for the netfilter patches to the 3.1 kernel patches (patch by tripolar) 
SVN-Revision: 28734
 2011-11-03 20:02:31 +00:00
John Crispin
95d36d3efe lantiq: remove obseleted folder. we use 3.1 now 
SVN-Revision: 28728
 2011-11-03 16:33:27 +00:00
John Crispin
ea36ad76bc lantiq: bump to 3.1 
SVN-Revision: 28721
 2011-11-03 15:15:52 +00:00
Gabor Juhos
4c985724af ar71xx: add missing AR71XX_MACH_TL_WR741ND_V4 
SVN-Revision: 28709
 2011-11-01 14:38:12 +00:00
Gabor Juhos
fc8adbb854 ar71xx: build image for the TL-WR741ND v4 board 
SVN-Revision: 28708
 2011-11-01 11:20:55 +00:00
Gabor Juhos
91f08d47c2 ar71xx: add initial support for the TL-WR741ND v4 board 
The ethernet port LEDs are not working yet.

SVN-Revision: 28706
 2011-11-01 11:20:52 +00:00
Gabor Juhos
21e651c9a1 ar71xx: add AR933X GMAC register defines 
SVN-Revision: 28705
 2011-11-01 11:20:50 +00:00
Gabor Juhos
43e2e2e4ef ar71xx: combine LEDs setup in one file 
SVN-Revision: 28704
 2011-11-01 11:20:49 +00:00
Gabor Juhos
f372620ffa ar71xx: unify LED names on Planex boards 
SVN-Revision: 28703
 2011-11-01 11:20:47 +00:00
Gabor Juhos
66ab406d5a ar71xx: unify LED names on Buffalo boards 
SVN-Revision: 28702
 2011-11-01 11:20:46 +00:00
Gabor Juhos
e7586959df ar71xx: unify LED names on TP-Link boards 
SVN-Revision: 28701
 2011-11-01 11:20:44 +00:00
Gabor Juhos
3a7b12a27d ar71xx/all0258n: sysupgrade support 
U-Boot on the ALL0258N needs offset, size and md5 for kernel and rootfs to be
stored in the U-Boot environment.
If the checksums don't match during boot, a failsafe-system is booted instead.
This patch adds a board-specific sysupgrade hack for the all0258n which
calculates and updates the checksums for the U-Boot environment.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28700
 2011-11-01 09:23:32 +00:00
Gabor Juhos
f40557a692 ar71xx/all0258n: add default config 
This adds default network and uboot-env settings for the ALL0258N.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28699
 2011-11-01 09:23:31 +00:00
Gabor Juhos
06d9653b36 ar71xx: remove default network config of the mzk-w04nu board as well 
It works with the generic config.

SVN-Revision: 28695
 2011-11-01 09:23:25 +00:00
Gabor Juhos
693c777eaf ar71xx: remove LED setup of nonexistent interfaces on RB750 
SVN-Revision: 28693
 2011-10-31 14:26:56 +00:00
Gabor Juhos
2bcd612e72 ar71xx: remove default network config of the wnr2000 board 
It is the same as the generic configuration.

SVN-Revision: 28692
 2011-10-31 14:26:51 +00:00
Vasilis Tsiligiannis
17ccd4aec4 rt305x: Create factory image for Fonera 2.0n 
SVN-Revision: 28689
 2011-10-31 09:23:44 +00:00
Michael Büsch
29958120a2 omap24xx: Default to linux-3.1 
SVN-Revision: 28687
 2011-10-30 22:42:00 +00:00
Michael Büsch
c00fd42353 omap24xx: Fix n810 LCD initialization 
SVN-Revision: 28685
 2011-10-30 20:31:45 +00:00
Michael Büsch
f37c24d35f omap24xx: Fix n810 boot 
SVN-Revision: 28683
 2011-10-30 18:46:45 +00:00
Gabor Juhos
39b3bfcf6a ar71xx/sysupgrade: use $magic_long instead of $magic when comparing with a 32-bit value 
Aparently $magic_long was meant here instead of $magic when comparing with
32-bit values.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28678
 2011-10-30 13:06:30 +00:00
Michael Büsch
fd0e6e1452 omap24xx: Refresh 3.1 config 
SVN-Revision: 28677
 2011-10-29 22:52:44 +00:00
Michael Büsch
ba9ee13744 omap24xx: Refresh 3.1 patches 
SVN-Revision: 28676
 2011-10-29 22:52:07 +00:00
Michael Büsch
e184bfe6f0 Fix tusb patch 
SVN-Revision: 28675
 2011-10-29 22:33:59 +00:00
Michael Büsch
a3db2f2055 omap24xx: Fix MUSB compile 
SVN-Revision: 28674
 2011-10-29 22:26:27 +00:00
Michael Büsch
5dde93038f omap24xx: Add n800 touchscreen and keypad drivers. Thanks to Marat Radchenko. 
SVN-Revision: 28673
 2011-10-29 20:35:36 +00:00
Michael Büsch
7d123a86e3 omap24xx: Add 3.1 patchset. 
SVN-Revision: 28672
 2011-10-29 19:02:50 +00:00
Gabor Juhos
415814f051 ar71xx: fix typos in image/Makefile 
SVN-Revision: 28618
 2011-10-27 07:54:52 +00:00
Gabor Juhos
1646346798 ar71xx: add initial support for the OpenMesh OM2P board 
Based on a patch by Marek Lindner <marek@open-mesh.com>

SVN-Revision: 28617
 2011-10-27 07:54:51 +00:00
Gabor Juhos
d02f22fea1 ar71xx/all0258n: fix partition layout 
A miscalculation in the original patch makes OpenWrt destroy the failsafe image.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28615
 2011-10-27 07:54:47 +00:00
Michael Büsch
f15f6bc76f Update my email address 
SVN-Revision: 28603
 2011-10-26 14:54:26 +00:00
Felix Fietkau
b17bfe4f68 x86: disable crashlog, ioremap of RAM does not work properly here 
SVN-Revision: 28599
 2011-10-26 11:49:25 +00:00
Gabor Juhos
4a70cace09 ar71xx: create image for the WNDR3800 
This adds support for the Netgear WNDR3800, it is almost the same as
the WNDR3700v2. It just has more RAM so the hd_id had to be adjusted.

Signed-off-by: Petri Rosenström <petri.rosenstrom@gmail.com>

SVN-Revision: 28597
 2011-10-26 06:12:47 +00:00
Jo-Philipp Wich
3d1d93cb0c target: remove CONFIG_IDE_PROC_FS support as well 
SVN-Revision: 28586
 2011-10-25 16:40:06 +00:00
Jo-Philipp Wich
de7cae82e9 brcm47xx: revert accidentially added EARLY_PRINTK symbol from previous commit 
SVN-Revision: 28585
 2011-10-25 16:19:52 +00:00
Jo-Philipp Wich
a9e64493d8 target: globally disable BSD process accounting 
SVN-Revision: 28584
 2011-10-25 16:18:36 +00:00
Gabor Juhos
ee8077f0fe ramips: Support for NexAira BC2 
The preconfiguration of the USB LED has benn move to the
/etc/uci-defaults/leds script. [juhosg]

Signed-off-by: Adam Porter <porter.adam at gmail.com>

SVN-Revision: 28571
 2011-10-24 21:49:36 +00:00
Gabor Juhos
18452a753b ramips: fix switch-port assignment for HW550-3G 
WAN is on swtich port 0 for Aztech HW550-3G.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28570
 2011-10-24 21:49:32 +00:00
Gabor Juhos
68a01c0180 ramips: combine led setup for all boards in one file 
This removes unnecessary duplication and simplifies led setup for new
boards. It would be a one line change most likely.

Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 28569
 2011-10-24 21:49:31 +00:00
Gabor Juhos
c8b9086ac5 ar71xx: build image for the Buffalo WHR-HP-G300N 
Based on a patch by Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28568
 2011-10-24 21:49:29 +00:00
Gabor Juhos
9d51cda2db ar71xx: Buffalo WHR-HP-G300N kernel support 
The initial support for the Buffalo WHR-HP-G300N box.
The code was confirmed to boot and run, but not tested in depth.

Known problem: iw phy phy0 info shows:
	Coverage class: 0 (up to 0m)
	Available Antennas: TX 0 RX 0

Signed-off-by: Yoichi Shinoda <shinoda@jaist.ac.jp>

SVN-Revision: 28567
 2011-10-24 21:49:26 +00:00
Gabor Juhos
0ab6be2ba3 ar71xx: build image for the Allnet ALL0258N board 
Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28565
 2011-10-24 21:49:23 +00:00
Gabor Juhos
d96e321bd1 ar71xx: add kernel support for the Allnet ALL0258N board 
This patchs adds support for the Allnet ALL0258N outdoor AP/bridge.
The ALL0258N is based on the AR7240 SoC paired with an AR9285 radio,
it got 8MB of NOR and 32MB SDRAM.

Signed-off-by: Daniel Golle <dgolle@allnet.de>

SVN-Revision: 28564
 2011-10-24 21:49:21 +00:00
Gabor Juhos
ef41e0a61c ar71xx: don't override CONFIG_FSNOTIFY 
SVN-Revision: 28563
 2011-10-24 21:49:18 +00:00
Jo-Philipp Wich
b61de9c865 base-files: make sure inittab-console-fixup returns with success (#10275) 
SVN-Revision: 28562
 2011-10-24 21:35:43 +00:00
Nicolas Thill
b0d9bccafc x86: allow VDI & VMDK images for all subtargets (closes: #10255) 
SVN-Revision: 28518
 2011-10-22 13:09:15 +00:00
Jonas Gorski
40d088446f linux: generic: refresh patches for 3.1-rc10 
Hopefully the last one and identical to final.

SVN-Revision: 28492
 2011-10-20 10:32:44 +00:00
Jonas Gorski
a136b67604 linux: ar71xx: add support for Mikrotik Routerboard RB493G 
SVN-Revision: 28423
 2011-10-11 23:05:16 +00:00
Jonas Gorski
03f91068d1 ar71xx: add a workaround for ar8316 not always driving the TA bit to low 
AR8316 behind a GPIO bitbanged MDIO bus fails to drive the turnaround bit
to low despite returning a valid value. Ignore it and just use the
returned value anyway.

SVN-Revision: 28422
 2011-10-11 23:05:13 +00:00
Jonas Gorski
b7a2a74823 ar8216: use mdiobus_{read,write} to ensure proper locking 
SVN-Revision: 28421
 2011-10-11 23:05:10 +00:00
John Crispin
0a866293bd * update patches to 3.0 
* add basic vr9 support
* backport 3.1 fixes
* backport 3.2 queue (falcon)

SVN-Revision: 28405
 2011-10-10 15:13:46 +00:00
Jonas Gorski
c674c874b7 ag71xx: close a race between the phy state machine and link state 
A fast stop/start cycle could leave the ag71xx interrupts and tx engine
disabled when using a phy driver with a fixed link and the start/stop
happens between two phy state machine polls.

Prevent this by always forcing the link down on stop regardless of phy
state and having a phy connected.

SVN-Revision: 28380
 2011-10-08 11:37:14 +00:00
Jo-Philipp Wich
ce5e1abbb7 add IDs for Huawai K3770, K3771, K4510 and K4511 to option driver 
SVN-Revision: 28376
 2011-10-06 18:23:16 +00:00
Florian Fainelli
829ae01f16 add missing kernel config symbols 
SVN-Revision: 28363
 2011-10-04 09:15:37 +00:00
Daniel Dickinson
b0345ef184 Was specifying input-polled-keys and not input-keys-polled as the module name. Philip Prindeville - 2011-10-03 03:58:17 
SVN-Revision: 28357
 2011-10-03 04:39:54 +00:00
Daniel Dickinson
c0a625ffbf Add patch for linux-3.0 as well. 
Fix typo from previous submission with input-keys-polled.
Philip Prindeville - 2011-10-03 01:44:55

SVN-Revision: 28356
 2011-10-03 03:09:20 +00:00
Daniel Dickinson
7e372b6dcf New x86 platform specific symbol needed for 3.1-rc3. 2011-10-03 03:06:29 +00:00
Daniel Dickinson
541aa8e38e A lot of these options get set automatically when Geode is selected. 
Don't make the config more complicated than it needs to be.
Philip Prindeville - 2011-08-29 03:15:27

SVN-Revision: 28353
 2011-10-03 03:02:42 +00:00
Florian Fainelli
3802769ea1 add vlan definitions for Siemens SE505v2 
Hi,

this patch adds the correct vlan definitions for the Siemens SE505v2. It
applies to trunk as well as backfire (please apply here too). On
backfire this also patches brcm-2,4, because brcm47xx base-files is just
symlinked to brcm-2.4.

It also fixes two whitespace issues.

Tested with brcm47xx on both trunk and backfire branch and works as
expected.

Signed-off-by: Manuel Munz <freifunk@somakoma.de>

SVN-Revision: 28336
 2011-09-30 12:55:33 +00:00
John Crispin
aecc73de77 The enable function was using the global timeout variable for local operations. This resulted in the value of the global variable being corrupted, thus breaking the code. 
SVN-Revision: 28310
 2011-09-26 10:35:51 +00:00
John Crispin
1ef8066bff * remove obseleted m25p80 patch 
SVN-Revision: 28309
 2011-09-26 09:36:02 +00:00
John Crispin
cf59e7255d * rebase 3.0 patches * fold some fixes into existing patches 
SVN-Revision: 28308
 2011-09-26 09:35:02 +00:00
Gabor Juhos
6ac4156136 ar71xx: fix MAC addresses on the DIR-825-B1 board 
Patch-by: Lukas Kuna

SVN-Revision: 28295
 2011-09-23 19:56:39 +00:00
Gabor Juhos
e45d7d7006 ar71xx: enable login only on the system console by default 
SVN-Revision: 28294
 2011-09-23 19:56:38 +00:00
Alexandros C. Couloumbis
5fc14dfb87 linux/generic: commit an upstream kernel 3.0 patch (fixes busubox-1.19.2 build failure) 
SVN-Revision: 28293
 2011-09-23 10:00:13 +00:00
Gabor Juhos
49ac36e818 ar71xx: build images for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28279
 2011-09-21 11:47:56 +00:00
Gabor Juhos
733399600f ar71xx: add support for the TP-Link TL-WR703N v1 board 
Based on a patch by dongyuqi <729650915@qq.com>

SVN-Revision: 28277
 2011-09-21 11:47:53 +00:00
Gabor Juhos
d3617ac7d3 ar71xx: add AR933x specific USB setup function 
SVN-Revision: 28276
 2011-09-21 11:47:51 +00:00
Gabor Juhos
91340d8af7 ar71xx: add ar71xx_device_reset_rmw helper 
SVN-Revision: 28275
 2011-09-21 11:47:50 +00:00
Gabor Juhos
9fa51d5c38 ar71xx: fix copy&paste bug in WZRHPAG300H profile description 
SVN-Revision: 28274
 2011-09-21 11:47:48 +00:00
Gabor Juhos
079e746fc4 ar71xx: remove 'default [yn]' from machine Kconfig entries 
SVN-Revision: 28273
 2011-09-21 11:47:47 +00:00
Gabor Juhos
73dac07c44 ar71xx: sort AR71XX_MACH_* entries 
SVN-Revision: 28272
 2011-09-21 11:47:45 +00:00
Gabor Juhos
ef2431c8d9 ar71xx: create image for the TP-Link TL-WR743ND v1 
Same hardware as WR741ND but with PoE support.

Signed-off-by: Paul Fertser <fercerpav@gmail.com>

SVN-Revision: 28271
 2011-09-21 11:47:44 +00:00
Gabor Juhos
76d0d1a837 ar71xx: create image for the TP-Link TL-WR740N v3 
Signed-off-by: Martin Raykov <martin.raykov@gmail.com>

SVN-Revision: 28269
 2011-09-21 11:47:40 +00:00
Gabor Juhos
93c093057d generic: jumbo frames support for rtl8366s 
This patch adds the option to enable jumbo frames on the rtl8366s
switch. This is almost exactly the same as the first patch at
https://dev.openwrt.org/ticket/7977 and it has been requested
in a comment there.

I have tested this and it successfully allows devices on the switch
using jumbo frames to communicate.

Signed-off-by: Ash Hughes <ashley.hughes@blueyonder.co.uk>

SVN-Revision: 28267
 2011-09-21 11:47:38 +00:00
Felix Fietkau
1bdf65f580 ar71xx: fix register range check for DMA stuck checks (thx, Frédéric Moulins) 
SVN-Revision: 28213
 2011-09-11 17:44:12 +00:00
Jo-Philipp Wich
ba46c7b3c6 Xen DomU: make sure kernel is gzip compressed, pygrub cannot handle xz 
SVN-Revision: 28197
 2011-09-08 22:18:26 +00:00
Felix Fietkau
65d809ef19 ar71xx: do not count normal interrupts as spurious (fixes #10037) 
SVN-Revision: 28182
 2011-09-06 05:38:23 +00:00
Felix Fietkau
de8cabe839 ar71xx: clean up profiles, put in kmod-ath9k and wpad-mini by default (fixes #9954) 
SVN-Revision: 28173
 2011-09-05 18:37:48 +00:00
Imre Kaloz
ed2c8bdc92 upgrade testing kernel support to 3.1 
SVN-Revision: 28165
 2011-09-04 15:06:05 +00:00
Imre Kaloz
4f0b1a6602 cleanup config 
SVN-Revision: 28164
 2011-09-04 15:02:37 +00:00
Imre Kaloz
0569cff6e1 refresh patches 
SVN-Revision: 28163
 2011-09-04 15:01:56 +00:00
Imre Kaloz
6d17e13cde add missing symbols 
SVN-Revision: 28162
 2011-09-04 15:01:25 +00:00
Felix Fietkau
24dfe525c2 brcm47xx: fix padding of trx images, padjffs2 does not work properly on empty files by default 
SVN-Revision: 28125
 2011-08-29 21:23:51 +00:00
Felix Fietkau
cd2c68501c ar71xx: fix ethernet PLL setting on ar7242 
SVN-Revision: 28124
 2011-08-29 21:23:46 +00:00
Hamish Guthrie
cc037a5e27 Remove subpage align patch 
SVN-Revision: 28086
 2011-08-25 11:49:55 +00:00
Hamish Guthrie
21f7943561 Re-order patches, add nand sub-page alignment 
SVN-Revision: 28084
 2011-08-25 10:37:30 +00:00
Florian Fainelli
cbd28ad0ec bump to 2.6.39.4 
Since linux gets developed on x86 more than all other hardware,
hardly makes sense to have our default x86 version be trailing
by over a year.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 28082
 2011-08-25 09:35:51 +00:00
Florian Fainelli
d2652dee9d update alix2 platform driver 
Add support for Ed Wildgoose's alix platform driver plus my
enhancement to add GPIO soft button support.

Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>

SVN-Revision: 28081
 2011-08-25 09:35:45 +00:00
Jonas Gorski
71adaae258 kernel: add two missing config symbols for 3.1 
SVN-Revision: 28080
 2011-08-24 11:43:25 +00:00
Gabor Juhos
72e117ec79 ramips: rt305x: add support for the ZyXEL NBG-419N board 
SVN-Revision: 28078
 2011-08-22 20:41:49 +00:00
Gabor Juhos
4b96d3af2a ramips: rt305x: remove unused defines from mach-nw718.c 
SVN-Revision: 28077
 2011-08-22 20:41:48 +00:00
Gabor Juhos
462ca22e9c ramips: sort Makefile entries 
SVN-Revision: 28076
 2011-08-22 20:41:47 +00:00
Gabor Juhos
d50494f3bb ramips: sort RAMIPS_MACH_* defines 
SVN-Revision: 28075
 2011-08-22 20:41:45 +00:00
Gabor Juhos
90686691ce ramips: fix wireless firmware extraction for wr512-3gn 
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28073
 2011-08-22 18:08:45 +00:00
Gabor Juhos
f0049824b9 ramips: remove 'default [yn]' keywords from machine Kconfig entries 
SVN-Revision: 28054
 2011-08-19 15:55:12 +00:00
Gabor Juhos
6720025497 ramips: rt305x: fix wr512n image generation 
SVN-Revision: 28053
 2011-08-19 15:55:11 +00:00
Gabor Juhos
9085b05d9e ramips: rt305x: support for wr512-3gn-like routers 
Signed-off-by: Andrew Andrianov <necromant@necromant.ath.cx>

SVN-Revision: 28052
 2011-08-19 15:55:10 +00:00
Gabor Juhos
46b101ad0a ramips: register usb on Belkin F5D8235 v2 and Argus ATP-52-B routers 
Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28051
 2011-08-19 15:55:08 +00:00
Gabor Juhos
05209860da ramips: fix wireless on Belkin F5D8235 v2 
Fix wireless firmware extract from flash for Belkin F5D8235 v2.

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28050
 2011-08-19 15:55:07 +00:00
Gabor Juhos
f8ab604eb6 ramips: fix typo in default packages 
Fix fivebytepypo - there is no such kernel module wpad-mini :)

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 28049
 2011-08-19 15:55:05 +00:00
Hamish Guthrie
048d4aca76 omap35xx: Add 3.0.3 kernel support for Gumstix 
SVN-Revision: 28047
 2011-08-19 12:00:08 +00:00
Hauke Mehrtens
464539b074 kernel: update to version 3.0.3 
SVN-Revision: 28043
 2011-08-18 12:54:12 +00:00
Jo-Philipp Wich
ebb152295b fix the default network configuration for the ASUS WL-330gE (#8751) 
SVN-Revision: 28024
 2011-08-17 03:16:59 +00:00
Hauke Mehrtens
09b1073f9b kernel: update kernel to version 2.6.39.4 
SVN-Revision: 28022
 2011-08-16 22:04:10 +00:00
Jonas Gorski
3e94ee9642 kernel: generic: refresh patches for 3.1-rc2 
SVN-Revision: 28021
 2011-08-16 21:42:15 +00:00
Gabor Juhos
ace8ce0845 ramips: use maccalc instead of hexdump + sed 
SVN-Revision: 28007
 2011-08-15 19:00:23 +00:00
Gabor Juhos
bfc47ffead ramips: rt305x: fix mac addresses on the Netcore NW718 board 
SVN-Revision: 28006
 2011-08-15 18:55:53 +00:00
Gabor Juhos
17c041cd0b ramips: add maccalc to the default package list 
SVN-Revision: 28005
 2011-08-15 18:55:52 +00:00
Gabor Juhos
67e480971c ramips: add input drivers to the default package list 
SVN-Revision: 28003
 2011-08-15 18:55:50 +00:00
Gabor Juhos
35ecf12059 ramips: rt305x: make config and factory partitions read-only on the ATP-52B 
SVN-Revision: 28002
 2011-08-15 18:55:48 +00:00
Gabor Juhos
75e2360ab3 ramips: add uci-defaults scripts to preconfigure USB LEDs 
SVN-Revision: 28000
 2011-08-15 14:12:00 +00:00
Gabor Juhos
e1b176de82 ramips: rt305x: add some USB modules to the default profile 
SVN-Revision: 27999
 2011-08-15 14:11:58 +00:00
Gabor Juhos
169d68c98c ramips: rt305x: add dwc_otg driver 
Based on a patch by Layne Edwards <ledwards@astrumtech.net>

SVN-Revision: 27997
 2011-08-15 14:11:55 +00:00
Gabor Juhos
0ca16a4600 ramips: rt305x: register the dwc_otg device on the relevant boards 
SVN-Revision: 27996
 2011-08-15 14:11:52 +00:00
Gabor Juhos
addc86fdbd ramips: rt305x: add dwc_otg platform device 
Signed-off-by: Alexander Gordeev <lasaine@lvk.cs.msu.su>

SVN-Revision: 27995
 2011-08-15 14:11:51 +00:00
Gabor Juhos
6ef87ff5e6 ramips: sync kernel config 
SVN-Revision: 27993
 2011-08-15 14:11:48 +00:00
Gabor Juhos
4ee4fc9725 ramips: load the input drivers during preinit 
SVN-Revision: 27992
 2011-08-15 14:11:47 +00:00
Gabor Juhos
a3c7e71ae1 ramips: add support for Argus ATP-52B 
[The ESW related changes has been removed - juhosg]

Signed-off-by: Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27991
 2011-08-15 14:11:45 +00:00
Gabor Juhos
1ebcf03789 ramips: allow to specify port layout for the switch of the RT305x/RT3350 
Based on a patch by Roman Yeryomin <roman@advem.lv>

SVN-Revision: 27990
 2011-08-15 14:11:43 +00:00
Gabor Juhos
bb64fb2e58 generic: ar8216: add support for get link status 
SVN-Revision: 27989
 2011-08-15 14:11:41 +00:00
Felix Fietkau
50817f6afe kernel: disable cfi cmdset 0002 erase suspend 
on some platforms, erase suspend leads to data corruption and lockups when write
ops collide with erase ops. this has been observed on the buffalo wzr-hp-g300nh.
rather than play whack-a-mole with a hard to reproduce issue on a variety of devices,
simply disable erase suspend, as it will usually not produce any useful gain on
the small filesystems used on embedded hardware.

SVN-Revision: 27984
 2011-08-15 00:15:36 +00:00
Felix Fietkau
12c84f8eeb ar71xx: add some code to detect DMA stuck conditions on ar7240 
SVN-Revision: 27975
 2011-08-13 22:30:14 +00:00
Felix Fietkau
85ccc74e1b ar71xx: on ar724x only reset the link status in the restart handler, the fast reset takes care of DMA stuck issues 
SVN-Revision: 27973
 2011-08-13 21:49:46 +00:00
Hauke Mehrtens
77218b0338 brcm47xx: fix flash detection on chipcommon less devices. 
This closes #9906
Thank you for the report Kim

SVN-Revision: 27967
 2011-08-12 16:37:22 +00:00
Felix Fietkau
82a05d1a19 initramfs: allow preinit to enable switching from initramfs to tmpfs to allow overlayfs to be mounted on top of it 
SVN-Revision: 27960
 2011-08-11 20:32:57 +00:00
Felix Fietkau
d26bb6c59c ar71xx: adjust the mtd layout of tew-632brp and dir-615c to match the image layout (fixes #9922) 
SVN-Revision: 27959
 2011-08-11 13:52:40 +00:00
Florian Fainelli
ce2ced7311 package more board specific modules: 
- keyboard matrix driver
- SoC sound support

based on patch by KanjiMonster

SVN-Revision: 27957
 2011-08-11 11:18:44 +00:00
Florian Fainelli
f7dbf2ef04 add more missing touchscren symbols (3.0+) 
SVN-Revision: 27956
 2011-08-11 11:18:41 +00:00
Florian Fainelli
11b1f687d4 disable hardware perf support to work in qemu 
SVN-Revision: 27955
 2011-08-11 11:18:37 +00:00
Hauke Mehrtens
20de21593b kernel: revert r27953 
KanjiMonster did the right patch, I was just confused because of linux-3.0 and linux-2.6.30

SVN-Revision: 27954
 2011-08-11 09:54:02 +00:00
Hauke Mehrtens
409f8211e1 kernel: fix ocf patch for kernel 2.6.30 
find_task_by_vpid is already exported by the kernel without any patches needed.

SVN-Revision: 27953
 2011-08-11 09:47:36 +00:00
Jonas Gorski
7304dcad2a kernel: 2.6.30: remove bogus additional find_task_by_vpid export from OCF 
find_task_by_vpid is already exported, thus breaking builds.

SVN-Revision: 27952
 2011-08-11 09:46:30 +00:00
Jonas Gorski
def60e2918 ar71xx: make ehci patch apply again 
SVN-Revision: 27951
 2011-08-10 23:02:56 +00:00
Felix Fietkau
9e5ead9a51 ar71xx: fix a copy&paste bug that broke wzr-hp-g300nh and wzr-hp-ag300h images (#9918) 
SVN-Revision: 27950
 2011-08-10 22:24:56 +00:00
Florian Fainelli
b59ab7d13b fix ehci build on 3.0+ 
SVN-Revision: 27946
 2011-08-10 11:37:25 +00:00
Florian Fainelli
0e40c19b45 add ignore_oc in struct ehci_hcd 
SVN-Revision: 27945
 2011-08-10 11:37:21 +00:00
Florian Fainelli
458716389c update to 3.0.1 
SVN-Revision: 27943
 2011-08-09 13:13:22 +00:00
Florian Fainelli
f124358722 add CONFIG_EARLY_PRINTK 
SVN-Revision: 27942
 2011-08-09 13:13:16 +00:00
Jonas Gorski
6b5f483efa bcm63xx: add support for linux 3.1-rc1 
SVN-Revision: 27941
 2011-08-09 12:19:49 +00:00
Jonas Gorski
cf2070bd5b linux: generic: add support for 3.1-rc1 
SVN-Revision: 27940
 2011-08-09 12:19:43 +00:00
Daniel Dickinson
7ef004a144 Add packages that will be relant as "There's a new Alix platform driver hitting linux-next upstream. Get ready for it in 2.6.39.4 and 3.0. 
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>"

SVN-Revision: 27929
 2011-08-08 02:33:18 +00:00
Felix Fietkau
ba9e7889dd kernel: fix another typo in the netfilter optimization patches 
SVN-Revision: 27927
 2011-08-07 21:17:18 +00:00
Hauke Mehrtens
6f4151b7f0 kernel: add missing option 
SVN-Revision: 27925
 2011-08-06 16:46:04 +00:00
Felix Fietkau
ac96ae6731 kernel: add missing checks in the netfilter optimization patch which broke some rules containing only source/destination address checks 
SVN-Revision: 27923
 2011-08-06 12:39:31 +00:00
Hauke Mehrtens
a1d5ad7655 uml: add some missing options 
SVN-Revision: 27921
 2011-08-06 11:23:45 +00:00
Hauke Mehrtens
d447cb5164 kernel: add some missing config options 
These options where found by buildbot

SVN-Revision: 27920
 2011-08-06 10:41:15 +00:00
Hauke Mehrtens
51be984655 kernel: update to kernel version 3.0.1 
SVN-Revision: 27918
 2011-08-06 09:51:55 +00:00
Florian Fainelli
55e020cd14 update to kernel 3.0 
SVN-Revision: 27912
 2011-08-05 13:48:42 +00:00
Florian Fainelli
698c1b4952 add more missing config symbols 
SVN-Revision: 27911
 2011-08-05 13:48:38 +00:00
Florian Fainelli
48af2495b4 update to kernel 3.0 
SVN-Revision: 27910
 2011-08-05 13:48:35 +00:00
Florian Fainelli
a8e79cbdf8 add 101-perf_arm_uclibc.patch to 3.0 patches 
SVN-Revision: 27909
 2011-08-05 13:48:31 +00:00
Florian Fainelli
c99d08f050 add missing config symbol 
SVN-Revision: 27908
 2011-08-05 13:48:28 +00:00
Gabor Juhos
7e5a1bc1d0 ar71xx: fix image generation 
SVN-Revision: 27907
 2011-08-05 10:31:52 +00:00
Hauke Mehrtens
77966b81d8 brcm47xx: use kernel 3.0 
As this target changes often these days it is hard to support more kernel versions. Now only kernel 3.0 is supported.

SVN-Revision: 27906
 2011-08-04 20:10:24 +00:00
Hauke Mehrtens
8428ebd8e8 brcm47xx: update patches 
* this adds sflash support for ssb devices
* the flash is now a platform device
* minor updates

SVN-Revision: 27902
 2011-08-04 20:04:54 +00:00
Gabor Juhos
85b858fae6 ar71xx: enable sysupgrade on the AP96 and DB120 boards 
SVN-Revision: 27901
 2011-08-04 19:41:18 +00:00
Gabor Juhos
fb77134596 ar71xx: use the same test for AP121 and Zcomax sysupgrade images 
SVN-Revision: 27900
 2011-08-04 19:41:17 +00:00
Gabor Juhos
fd3a5f64f2 ar71xx: cleanup image generation Makefile 
SVN-Revision: 27899
 2011-08-04 19:41:16 +00:00
Felix Fietkau
4b75394056 ar71xx: fix ethernet FIFO state corruption on ar7240 
When starting/stopping DMA sometimes the FIFO state gets corrupted,
leading to wildly fluctuating latencies or packet data corruption.
Fix this by issuing a fast MAC reset as soon as the link is detected
as up. Fixes #9689, #9405

SVN-Revision: 27896
 2011-08-04 17:36:31 +00:00
Felix Fietkau
d2aeca6b6d ag71xx: fix memory corruption issues on ar7240 on ethernet start/stop 
When the DMA engine state gets corrupted due to a hardware issues, it
often won't stop rx until a full reset is issued. In that case the hardware
must keep a valid descriptor, otherwise it will write to random places in
system RAM, triggering random crashes. To fix this, keep a dummy descriptor
without a buffer that keeps the DMA engine in a sane state until the reset
is done

SVN-Revision: 27895
 2011-08-04 17:36:27 +00:00
Felix Fietkau
500c3a1475 ar71xx: fix MAC/MDIO reset mask handling 
SVN-Revision: 27894
 2011-08-04 17:36:23 +00:00
Jonas Gorski
3b36e83a29 generic: Add missing config symbol 
SVN-Revision: 27887
 2011-08-03 23:28:00 +00:00