openwrtv3/target/linux/lantiq/dts/ARV7525PW.dts

156 lines
2.8 KiB
Text
Raw Normal View History

/dts-v1/;
#include "danube.dtsi"
#include <dt-bindings/input/input.h>
/ {
compatible = "arcadyan,arv7525pw", "lantiq,xway", "lantiq,danube";
model = "Speedport W303V Typ A";
2012-12-15 02:00:20 +00:00
chosen {
bootargs = "console=ttyLTQ0,115200";
};
aliases {
led-boot = &power_green;
led-failsafe = &power_red;
led-running = &power_green;
led-dsl = &power_green;
led-internet = &online;
led-wifi = &wifi;
};
memory@0 {
reg = <0x0 0x2000000>;
};
2012-12-15 02:00:20 +00:00
sram@1F000000 {
vmmc@107000 {
status = "okay";
gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
2012-12-15 02:00:20 +00:00
};
};
fpi@10000000 {
localbus@0 {
nor-boot@0 {
compatible = "lantiq,nor";
bank-width = <2>;
reg = <0 0x0 0x2000000>;
#address-cells = <1>;
#size-cells = <1>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "uboot";
reg = <0x00000 0x10000>;
read-only;
};
partition@10000 {
label = "uboot_env";
reg = <0x10000 0x10000>;
read-only;
};
partition@20000 {
label = "firmware";
reg = <0x20000 0x3d0000>;
};
boardconfig: partition@400000 {
label = "board_config";
reg = <0x3f0000 0x10000>;
read-only;
};
};
};
};
gpio: pinmux@E100B10 {
pinctrl-names = "default";
pinctrl-0 = <&state_default>;
state_default: pinmux {
exin {
lantiq,groups = "exin1";
lantiq,function = "exin";
};
pci {
lantiq,groups = "gnt1", "req1";
lantiq,function = "pci";
};
};
};
etop@E180000 {
2012-12-15 02:00:20 +00:00
phy-mode = "mii";
mtd-mac-address = <&boardconfig 0x16>;
};
};
2012-12-15 02:00:20 +00:00
gpio-keys-polled {
compatible = "gpio-keys-polled";
#address-cells = <1>;
#size-cells = <0>;
poll-interval = <100>;
wps {
label = "wps";
gpios = <&gpio 29 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
2012-12-15 02:00:20 +00:00
};
reset {
label = "reset";
gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
};
gpio-leds {
compatible = "gpio-leds";
power_green: power {
label = "arv7525pw:green:power";
gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
default-state = "keep";
2012-12-15 02:00:20 +00:00
};
power_red: power1 {
label = "arv7525pw:red:power";
gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
};
online: online {
label = "arv7525pw:green:online";
gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
};
2012-12-15 02:00:20 +00:00
voice {
label = "arv7525pw:green:telefonie";
gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
};
2012-12-15 02:00:20 +00:00
voice2 {
label = "arv7525pw:red:telefonie";
gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
};
wifi: wifi {
label = "arv7525pw:green:wlan";
gpios = <&gpio 9 GPIO_ACTIVE_LOW>;
};
};
};
&pci0 {
status = "okay";
interrupt-map = <0x7000 0 0 1 &icu0 135 1>;
wifi@0,0 {
compatible = "pci0,0";
reg = <0x7000 0 0 0 0>;
ralink,mtd-eeprom = <&boardconfig 0x410>;
};
};