openwrtv3/target/linux/ar71xx/base-files/etc/board.d/03_gpio_switches

#!/bin/sh
#
# Copyright (C) 2015 OpenWrt.org
#

. /lib/functions/uci-defaults.sh

board_config_update

board=$(board_name)

case "$board" in
nanostation-m)
	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "8"
	;;
nanostation-m-xw)
	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "2"
	;;
cpe210|\
cpe510|\
wbs210|\
wbs510)
	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"
	;;
rb-912uag-2hpnd|\
rb-912uag-5hpnd)
	ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "52" "1"
	;;
rb-750up-r2|\
rb-951ui-2nd|\
rb-952ui-5ac2nd)
	ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1"
	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"
	;;
rb-750p-pbr2)
	ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"
	;;
esac

board_config_flush

exit 0
ar71xx: convert gpio switch config to board.d Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47763 2015-12-04 15:02:42 +00:00			`#!/bin/sh`
			`#`
			`# Copyright (C) 2015 OpenWrt.org`
			`#`

all: drop old uci-defaults.sh Replace former uci-defaults.sh implementation with the uci-defaults-new.sh one and update all users accordingly. Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47867 2015-12-11 15:26:06 +00:00			`. /lib/functions/uci-defaults.sh`
ar71xx: convert gpio switch config to board.d Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47763 2015-12-04 15:02:42 +00:00
			`board_config_update`

treewide: use the generic board_name function Use the generic function instead ot the target specific ones. Signed-off-by: Mathias Kresin <dev@kresin.me> 2017-05-12 20:36:07 +00:00			`board=$(board_name)`
ar71xx: convert gpio switch config to board.d Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47763 2015-12-04 15:02:42 +00:00
			`case "$board" in`
			`nanostation-m)`
			`ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "8"`
			`;;`
			`nanostation-m-xw)`
			`ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "2"`
			`;;`
ar71xx/cpe510: split profile into 2 profiles cpe210 and cpe510 Split profile into 2GHz and 5GHz. The 5GHz devices are quite "special". The 2 GHz works perfect. Signed-off-by: Alexander Couzens <lynxis@fe80.eu> 2016-05-23 01:17:00 +00:00			`cpe210\|\`
ar71xx: add support for TP-Link WBS210/510 The devices are mostly identical to the CPE210/510, but use external antennas. Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net> 2017-01-05 15:01:17 +00:00			`cpe510\|\`
			`wbs210\|\`
			`wbs510)`
ar71xx: convert gpio switch config to board.d Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47763 2015-12-04 15:02:42 +00:00			`ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "20"`
			`;;`
ar71xx: add GPIO pin for usb power switch for RouterBOARD 912 RB912 has one usb shared between external USB and miniPCIe slot. GPIO52 can reroute power to external USB (=1) or internal miniPCIe slot (=0) Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> 2016-05-25 17:36:35 +00:00			`rb-912uag-2hpnd\|\`
			`rb-912uag-5hpnd)`
ar71xx: default to external USB power on RB-912UAG There's a GPIO that can switch between power to USB pins for the internal MiniPCIe slot or the external USB port. People are more likely to use the external one so enable it by default. Existing configurations should be unaffected Signed-off-by: Felix Fietkau <nbd@nbd.name> 2017-01-12 14:16:02 +00:00			`ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "52" "1"`
ar71xx: add GPIO pin for usb power switch for RouterBOARD 912 RB912 has one usb shared between external USB and miniPCIe slot. GPIO52 can reroute power to external USB (=1) or internal miniPCIe slot (=0) Signed-off-by: Cezary Jackiewicz <cezary@eko.one.pl> 2016-05-25 17:36:35 +00:00			`;;`
ar71xx: add support for RB750UPr2 This patch adds support for the MikroTik RouterBOARD hEX PoE lite https://routerboard.com/RB750UPr2 Specifications: - SoC: Qualcomm QCA9531 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Ethernet: 5x100M (1 PoE in, 1 PoE out) - USB: Type A This ethernet router is based on the same platform as the wireless router hAP. Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 2017-02-09 21:50:08 +00:00			`rb-750up-r2\|\`
ar71xx: add support for MikroTik hAP ac lite This patch adds support for the MikroTik RouterBOARD hAP ac lite (RB952Ui-5ac2nD). The hAP ac lite is nearly identical to the hAP, with an added QCA9887 5GHz radio. The 2.4GHz radio ID is also changed in the hAP ac lite. Signed-off-by: Ryan Mounce <ryan@mounce.com.au> 2017-03-08 09:07:00 +00:00			`rb-951ui-2nd\|\`
			`rb-952ui-5ac2nd)`
ar71xx: add support for RB951Ui-2nD This patch adds support for the MikroTik RouterBOARD hAP https://routerboard.com/RB951Ui-2nD Specifications: - SoC: Qualcomm QCA9531 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Wireless: builtin QCA9531, 2x2:2 - Ethernet: 5x100M (1 PoE in, 1 PoE out) - USB: Type A Signed-off-by: Thibaut VARENE <hacks@slashdirt.org> 2017-02-07 18:10:04 +00:00			`ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1"`
			`ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"`
			`;;`
ar71xx: add support for Mikrotik RB750P-PBr2 Specifications: - SoC: Qualcomm QCA9531 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Ethernet: 5x100M (1 PoE in, 4 PoE out) - Outdoor use ready This ethernet router is based on the same platform as the hEX PoE lite. Installation 1. login to the Mikrotik WebUI to backup your licence keys 2. setup a DHCP/BOOTP Server with: * DHCP-Option 66 (TFTP server name) pointing to a local TFTP Server within the same subnet of the DHCP range * DHCP-Option 67 (Bootfile-Name) matching the initramfs filename of the to be booted image 3. connect the port labled internet to your local network 4. keep the reset button pushed down and power on the board The board should load and start the initramfs image from the TFTP Server. Login as root/without password to the started LEDE via ssh listing on IPv4 address 192.168.1.1. Use sysupgrade to install LEDE. Revert to RouterOS Use the "rbcfg" package on in LEDE: * rbcfg set boot_protocol bootp * rbcfg set boot_device ethnand * rbcfg apply Open Netinstall and reboot routerboard. Now netinstall sees routerboard and you can install RouterOS. If NetInstall gets stuck on Sending offer just wait for it to timeout and then close and open Netinstall again. Click on install again. In order for RouterOS to function properly, you need to restore license for the device. You can do that by including license in NetInstall Signed-off-by: Robert Marko <robimarko@gmail.com> 2017-10-05 12:26:23 +00:00			`rb-750p-pbr2)`
			`ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"`
			`;;`
ar71xx: convert gpio switch config to board.d Signed-off-by: Jo-Philipp Wich <jow@openwrt.org> SVN-Revision: 47763 2015-12-04 15:02:42 +00:00			`esac`

			`board_config_flush`

			`exit 0`