ar71xx: add support for RB951Ui-2nD
This patch adds support for the MikroTik RouterBOARD hAP https://routerboard.com/RB951Ui-2nD Specifications: - SoC: Qualcomm QCA9531 (650MHz) - RAM: 64MB - Storage: 16MB NOR SPI flash - Wireless: builtin QCA9531, 2x2:2 - Ethernet: 5x100M (1 PoE in, 1 PoE out) - USB: Type A Signed-off-by: Thibaut VARENE <hacks@slashdirt.org>
This commit is contained in:
Thibaut VARENE
Felix Fietkau
parent
b18bae37a4
commit
8cbb2ac633
9 changed files with 170 additions and 1 deletions
|
|
@ -225,6 +225,15 @@ rb-750)
|
|||
rb-941-2nd)
|
||||
ucidef_set_led_timer "user" "USR/ACT" "rb:green:user" "1000" "1000"
|
||||
;;
|
||||
rb-951ui-2nd)
|
||||
ucidef_set_led_timer "user" "USER" "rb:green:user" "1000" "1000"
|
||||
ucidef_set_led_netdev "port1" "port1" "rb:green:port1" "eth0"
|
||||
ucidef_set_led_switch "port2" "port2" "rb:green:port2" "switch0" "0x10"
|
||||
ucidef_set_led_switch "port3" "port2" "rb:green:port3" "switch0" "0x08"
|
||||
ucidef_set_led_switch "port4" "port3" "rb:green:port4" "switch0" "0x04"
|
||||
ucidef_set_led_switch "port5" "port5" "rb:green:port5" "switch0" "0x02"
|
||||
ucidef_set_led_wlan "wlan" "WLAN" "rb:blue:wlan" "phy0tpt"
|
||||
;;
|
||||
rb-2011l|\
|
||||
rb-2011uas|\
|
||||
rb-2011uias|\
|
||||
|
|
|
|||
|
|
@ -137,6 +137,7 @@ ar71xx_setup_interfaces()
|
|||
pb42|\
|
||||
pb44|\
|
||||
rb-951ui-2hnd|\
|
||||
rb-951ui-2nd|\
|
||||
routerstation|\
|
||||
tl-wr710n|\
|
||||
tl-wr720n-v3|\
|
||||
|
|
|
|||
|
|
@ -27,6 +27,10 @@ rb-912uag-2hpnd|\
|
|||
rb-912uag-5hpnd)
|
||||
ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "52" "1"
|
||||
;;
|
||||
rb-951ui-2nd)
|
||||
ucidef_add_gpio_switch "usb_power_switch" "USB Power Switch" "45" "1"
|
||||
ucidef_add_gpio_switch "poe_passthrough" "PoE Passthrough" "14"
|
||||
;;
|
||||
esac
|
||||
|
||||
board_config_flush
|
||||
|
|
|
|||
|
|
@ -299,6 +299,7 @@ get_status_led() {
|
|||
rb-912uag-2hpnd|\
|
||||
rb-912uag-5hpnd|\
|
||||
rb-941-2nd|\
|
||||
rb-951ui-2nd|\
|
||||
rb-mapl-2nd)
|
||||
status_led="rb:green:user"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -868,6 +868,9 @@ ar71xx_board_detect() {
|
|||
*"RouterBOARD 951Ui-2HnD")
|
||||
name="rb-951ui-2hnd"
|
||||
;;
|
||||
*"951Ui-2nD")
|
||||
name="rb-951ui-2nd"
|
||||
;;
|
||||
*"RouterBOARD 2011L")
|
||||
name="rb-2011l"
|
||||
;;
|
||||
|
|
|
|||
|
|
@ -344,6 +344,7 @@ platform_check_image() {
|
|||
pb42|\
|
||||
pb44|\
|
||||
rb-941-2nd|\
|
||||
rb-951ui-2nd|\
|
||||
rb-mapl-2nd|\
|
||||
routerstation-pro|\
|
||||
routerstation|\
|
||||
|
|
@ -617,6 +618,7 @@ platform_pre_upgrade() {
|
|||
|
||||
case "$board" in
|
||||
rb-941-2nd|\
|
||||
rb-951ui-2nd|\
|
||||
rb-mapl-2nd)
|
||||
;;
|
||||
rb*|\
|
||||
|
|
@ -654,6 +656,7 @@ platform_do_upgrade() {
|
|||
|
||||
case "$board" in
|
||||
rb-941-2nd|\
|
||||
rb-951ui-2nd|\
|
||||
rb-mapl-2nd)
|
||||
PLATFORM_DO_UPGRADE_COMBINED_SEPARATE_MTD=1
|
||||
platform_do_upgrade_combined "$ARGV"
|
||||
|
|
|
|||
|
|
@ -921,12 +921,14 @@ config ATH79_MACH_RBSPI
|
|||
select ATH79_DEV_GPIO_BUTTONS
|
||||
select ATH79_DEV_LEDS_GPIO
|
||||
select ATH79_DEV_M25P80
|
||||
select ATH79_DEV_USB
|
||||
select ATH79_DEV_WMAC
|
||||
select ATH79_ROUTERBOOT
|
||||
help
|
||||
Say 'Y' here if you want your kernel to support the
|
||||
MikroTik RouterBOARD mAP lite
|
||||
MikroTik RouterBOARD hAP lite
|
||||
MikroTik RouterBOARD hAP
|
||||
|
||||
config ATH79_MACH_RBSXTLITE
|
||||
bool "MikroTik RouterBOARD SXT Lite"
|
||||
|
|
|
|||
|
|
@ -3,6 +3,7 @@
|
|||
*
|
||||
* - MikroTik RouterBOARD mAP L-2nD
|
||||
* - MikroTik RouterBOARD 941L-2nD
|
||||
* - MikroTik RouterBOARD 951Ui-2nD
|
||||
*
|
||||
* Copyright (C) 2017 Thibaut VARENE <varenet@parisc-linux.org>
|
||||
*
|
||||
|
|
@ -16,6 +17,9 @@
|
|||
#include <linux/routerboot.h>
|
||||
#include <linux/gpio.h>
|
||||
|
||||
#include <linux/spi/spi.h>
|
||||
#include <linux/spi/74x164.h>
|
||||
|
||||
#include <linux/mtd/mtd.h>
|
||||
#include <linux/mtd/partitions.h>
|
||||
|
||||
|
|
@ -40,6 +44,7 @@
|
|||
#define RBSPI_HAS_USB BIT(0)
|
||||
#define RBSPI_HAS_WLAN BIT(1)
|
||||
#define RBSPI_HAS_WAN4 BIT(2) /* has WAN port on PHY4 */
|
||||
#define RBSPI_HAS_SSR BIT(3) /* has an SSR on SPI bus 0 */
|
||||
|
||||
#define RB_ROUTERBOOT_OFFSET 0x0000
|
||||
#define RB_BIOS_SIZE 0x1000
|
||||
|
|
@ -166,6 +171,96 @@ static struct gpio_led rbhapl_leds[] __initdata = {
|
|||
},
|
||||
};
|
||||
|
||||
/* common RB SSRs */
|
||||
#define RBSPI_SSR_GPIO_BASE 40
|
||||
#define RBSPI_SSR_GPIO(bit) (RBSPI_SSR_GPIO_BASE + (bit))
|
||||
|
||||
/* RB 951Ui-2nD gpios */
|
||||
#define RB952_SSR_BIT_LED_LAN1 0
|
||||
#define RB952_SSR_BIT_LED_LAN2 1
|
||||
#define RB952_SSR_BIT_LED_LAN3 2
|
||||
#define RB952_SSR_BIT_LED_LAN4 3
|
||||
#define RB952_SSR_BIT_LED_LAN5 4
|
||||
#define RB952_SSR_BIT_USB_POWER 5
|
||||
#define RB952_SSR_BIT_LED_WLAN 6
|
||||
#define RB952_GPIO_SSR_CS 11
|
||||
#define RB952_GPIO_LED_USER 4
|
||||
#define RB952_GPIO_POE_POWER 14
|
||||
#define RB952_GPIO_USB_POWER RBSPI_SSR_GPIO(RB952_SSR_BIT_USB_POWER)
|
||||
#define RB952_GPIO_LED_LAN1 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN1)
|
||||
#define RB952_GPIO_LED_LAN2 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN2)
|
||||
#define RB952_GPIO_LED_LAN3 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN3)
|
||||
#define RB952_GPIO_LED_LAN4 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN4)
|
||||
#define RB952_GPIO_LED_LAN5 RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_LAN5)
|
||||
#define RB952_GPIO_LED_WLAN RBSPI_SSR_GPIO(RB952_SSR_BIT_LED_WLAN)
|
||||
|
||||
static struct gpio_led rb952_leds[] __initdata = {
|
||||
{
|
||||
.name = "rb:green:user",
|
||||
.gpio = RB952_GPIO_LED_USER,
|
||||
.active_low = 0,
|
||||
}, {
|
||||
.name = "rb:blue:wlan",
|
||||
.gpio = RB952_GPIO_LED_WLAN,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "rb:green:port1",
|
||||
.gpio = RB952_GPIO_LED_LAN1,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "rb:green:port2",
|
||||
.gpio = RB952_GPIO_LED_LAN2,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "rb:green:port3",
|
||||
.gpio = RB952_GPIO_LED_LAN3,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "rb:green:port4",
|
||||
.gpio = RB952_GPIO_LED_LAN4,
|
||||
.active_low = 1,
|
||||
}, {
|
||||
.name = "rb:green:port5",
|
||||
.gpio = RB952_GPIO_LED_LAN5,
|
||||
.active_low = 1,
|
||||
},
|
||||
};
|
||||
|
||||
static struct gen_74x164_chip_platform_data rbspi_ssr_data = {
|
||||
.base = RBSPI_SSR_GPIO_BASE,
|
||||
};
|
||||
|
||||
/* the spi-ath79 driver can only natively handle CS0. Other CS are bit-banged */
|
||||
static int rbspi_spi_cs_gpios[] = {
|
||||
-ENOENT, /* CS0 is always -ENOENT: natively handled */
|
||||
-ENOENT, /* CS1 can be updated by the code as necessary */
|
||||
};
|
||||
|
||||
static struct ath79_spi_platform_data rbspi_ath79_spi_data = {
|
||||
.bus_num = 0,
|
||||
.cs_gpios = rbspi_spi_cs_gpios,
|
||||
};
|
||||
|
||||
/*
|
||||
* Global spi_board_info: devices that don't have an SSR only have the SPI NOR
|
||||
* flash on bus0 CS0, while devices that have an SSR add it on the same bus CS1
|
||||
*/
|
||||
static struct spi_board_info rbspi_spi_info[] = {
|
||||
{
|
||||
.bus_num = 0,
|
||||
.chip_select = 0,
|
||||
.max_speed_hz = 25000000,
|
||||
.modalias = "m25p80",
|
||||
.platform_data = &rbspi_spi_flash_data,
|
||||
}, {
|
||||
.bus_num = 0,
|
||||
.chip_select = 1,
|
||||
.max_speed_hz = 25000000,
|
||||
.modalias = "74x164",
|
||||
.platform_data = &rbspi_ssr_data,
|
||||
}
|
||||
};
|
||||
|
||||
void __init rbspi_wlan_init(int wmac_offset)
|
||||
{
|
||||
char *art_buf;
|
||||
|
|
@ -209,7 +304,16 @@ static int __init rbspi_platform_setup(void)
|
|||
*/
|
||||
static void __init rbspi_peripherals_setup(u32 flags)
|
||||
{
|
||||
ath79_register_m25p80(&rbspi_spi_flash_data);
|
||||
unsigned spi_n;
|
||||
|
||||
if (flags & RBSPI_HAS_SSR)
|
||||
spi_n = ARRAY_SIZE(rbspi_spi_info);
|
||||
else
|
||||
spi_n = 1; /* only one device on bus0 */
|
||||
|
||||
rbspi_ath79_spi_data.num_chipselect = spi_n;
|
||||
rbspi_ath79_spi_data.cs_gpios = rbspi_spi_cs_gpios;
|
||||
ath79_register_spi(&rbspi_ath79_spi_data, rbspi_spi_info, spi_n);
|
||||
|
||||
if (flags & RBSPI_HAS_USB)
|
||||
ath79_register_usb();
|
||||
|
|
@ -314,5 +418,46 @@ static void __init rbhapl_setup(void)
|
|||
rbspi_gpio_keys_reset16);
|
||||
}
|
||||
|
||||
/*
|
||||
* Init the hAP hardware.
|
||||
* The 951Ui-2nD (hAP) has 5 ethernet ports, with ports 2-5 being assigned
|
||||
* to LAN on the casing, and port 1 being assigned to "internet" (WAN).
|
||||
* Port 1 is connected to PHY4 (the ports are labelled in reverse physical
|
||||
* number), so the SoC can be set to connect GMAC0 to PHY4 and GMAC1 to the
|
||||
* internal switch for the LAN ports.
|
||||
* The device also has USB, PoE output and an SSR used for LED multiplexing.
|
||||
*/
|
||||
static void __init rb952_setup(void)
|
||||
{
|
||||
u32 flags = RBSPI_HAS_WLAN | RBSPI_HAS_WAN4 | RBSPI_HAS_USB |
|
||||
RBSPI_HAS_SSR;
|
||||
|
||||
if (rbspi_platform_setup())
|
||||
return;
|
||||
|
||||
rbspi_spi_cs_gpios[1] = RB952_GPIO_SSR_CS;
|
||||
|
||||
rbspi_peripherals_setup(flags);
|
||||
|
||||
/* GMAC1 is HW MAC + 1, WLAN MAC IS HW MAC + 5 */
|
||||
rbspi_network_setup(flags, 1, 5);
|
||||
|
||||
gpio_request_one(RB952_GPIO_USB_POWER,
|
||||
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
||||
"USB power");
|
||||
|
||||
gpio_request_one(RB952_GPIO_POE_POWER,
|
||||
GPIOF_OUT_INIT_HIGH | GPIOF_EXPORT_DIR_FIXED,
|
||||
"POE power");
|
||||
|
||||
ath79_register_leds_gpio(-1, ARRAY_SIZE(rb952_leds), rb952_leds);
|
||||
|
||||
/* hAP has a single reset button as gpio 16 */
|
||||
ath79_register_gpio_keys_polled(-1, RBSPI_KEYS_POLL_INTERVAL,
|
||||
ARRAY_SIZE(rbspi_gpio_keys_reset16),
|
||||
rbspi_gpio_keys_reset16);
|
||||
}
|
||||
|
||||
MIPS_MACHINE_NONAME(ATH79_MACH_RB_MAPL, "map-hb", rbmapl_setup);
|
||||
MIPS_MACHINE_NONAME(ATH79_MACH_RB_941, "H951L", rbhapl_setup);
|
||||
MIPS_MACHINE_NONAME(ATH79_MACH_RB_952, "952-hb", rb952_setup);
|
||||
|
|
|
|||
|
|
@ -173,6 +173,7 @@ enum ath79_mach_type {
|
|||
ATH79_MACH_RB_941, /* MikroTik RouterBOARD 941-2nD */
|
||||
ATH79_MACH_RB_951G, /* Mikrotik RouterBOARD 951G */
|
||||
ATH79_MACH_RB_951U, /* Mikrotik RouterBOARD 951Ui-2HnD */
|
||||
ATH79_MACH_RB_952, /* MikroTik RouterBOARD 951Ui-2nD */
|
||||
ATH79_MACH_RB_MAPL, /* Mikrotik RouterBOARD mAP L-2nD */
|
||||
ATH79_MACH_RB_SXTLITE2ND, /* Mikrotik RouterBOARD SXT Lite 2nD */
|
||||
ATH79_MACH_RB_SXTLITE5ND, /* Mikrotik RouterBOARD SXT Lite 5nD */
|
||||
|
|
|
|||
Loading…
Reference in a new issue