ath79: add support for Buffalo WZR-HP-AG300H
Buffalo WZR-HP-AG300H is a dual band router based on
Qualcom Atheros AR7161 rev 2
Specification:
- 680 MHz CPU (Qualcomm Atheros AR7161)
- 128 MiB RAM (2x Samsung K4H511638G-LCCC)
- 32 MiB Flash (2x Winbond 25Q128BVFG)
- WiFi 5 GHz a/n (Atheros AR9220)
- WiFi 2.4 GHz b/g/n (Atheros AR9223)
- 1000Base-T WAN (Atheros AR7161)
- 4x 1000Base-T Switch (Atheros AR8316)
- 1x USB 2.0
- 3 Buttons (AOSS/WPS, Reset, USB Eject)
- 2 Slide switches (Router (on/off/auto), Movie Engine (on/off))
- 9 LEDs (Power green, WLAN 2GHz green, WLAN 2GHz amber,
WLAN 5GHz green, WLAN 5GHz LED amber, Router green,
Diag red, Movie Engine blue, USB green)
It is already supported by the ar71xx target.
For more information on the device visit the wiki:
<https://openwrt.org/toh/buffalo/wzr-hp-ag300h>
Serial console:
- The UART Header is next to Movie Engine Switch.
- Pinout is RX - TX - GND - 3.3V (Square Pad is 3.3V)
- The Serial setting is 115200-8-N-1.
Installation of OpenWRT from vendor firmware:
- Connect to the Web-interface at http://192.168.11.1
- Go to “Administration” → “Firmware Upgrade”
- Upload the OpenWrt factory image
Tested:
- Ethernet (LAN, WAN)
- WiFi
- Installation
- via TFTP rescue
- via factory image
- on firmware v1.77 (28-05-2012)
- on pro firmware v24SP2 r30356 (26-03-2018)
- via sysupgrade from ar71xx
(wlan devices don't work because of new names)
- via sysupgrade from itself
- Buttons
- LEDS
- USB (Power control and device recognition)
Signed-off-by: Bernhard Frauendienst <openwrt@nospam.obeliks.de>
2018-08-18 16:28:02 +00:00
|
|
|
include ./common-buffalo.mk
|
2018-06-13 08:51:51 +00:00
|
|
|
include ./common-netgear.mk
|
2018-03-02 18:28:50 +00:00
|
|
|
|
2018-09-04 21:27:02 +00:00
|
|
|
DEVICE_VARS += ADDPATTERN_ID ADDPATTERN_VERSION
|
|
|
|
|
|
|
|
|
|
define Build/cybertan-trx
|
|
|
|
|
@echo -n '' > $@-empty.bin
|
|
|
|
|
-$(STAGING_DIR_HOST)/bin/trx -o $@.new \
|
|
|
|
|
-f $(IMAGE_KERNEL) -F $@-empty.bin \
|
|
|
|
|
-x 32 -a 0x10000 -x -32 -f $@
|
|
|
|
|
-mv "$@.new" "$@"
|
|
|
|
|
-rm $@-empty.bin
|
|
|
|
|
endef
|
|
|
|
|
|
|
|
|
|
define Build/addpattern
|
|
|
|
|
-$(STAGING_DIR_HOST)/bin/addpattern -B $(ADDPATTERN_ID) \
|
|
|
|
|
-v v$(ADDPATTERN_VERSION) -i $@ -o $@.new
|
|
|
|
|
-mv "$@.new" "$@"
|
|
|
|
|
endef
|
|
|
|
|
|
2018-09-10 07:30:28 +00:00
|
|
|
define Build/elecom-header
|
|
|
|
|
$(eval fw_size=$(word 1,$(1)))
|
|
|
|
|
$(eval edimax_model=$(word 2,$(1)))
|
|
|
|
|
$(eval product=$(word 3,$(1)))
|
|
|
|
|
$(eval factory_bin=$(word 4,$(1)))
|
|
|
|
|
if [ -e $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) -a "$$(stat -c%s $@)" -lt "$(fw_size)" ]; then \
|
|
|
|
|
$(CP) $(KDIR)/tmp/$(KERNEL_INITRAMFS_IMAGE) $(factory_bin); \
|
|
|
|
|
$(STAGING_DIR_HOST)/bin/mkedimaximg \
|
|
|
|
|
-b -s CSYS -m $(edimax_model) \
|
|
|
|
|
-f 0x70000 -S 0x01100000 \
|
|
|
|
|
-i $(factory_bin) -o $(factory_bin).new; \
|
|
|
|
|
mv $(factory_bin).new $(factory_bin); \
|
|
|
|
|
( \
|
|
|
|
|
echo -n -e "ELECOM\x00\x00$(product)" | dd bs=40 count=1 conv=sync; \
|
|
|
|
|
echo -n "0.00" | dd bs=16 count=1 conv=sync; \
|
|
|
|
|
dd if=$(factory_bin); \
|
|
|
|
|
) > $(factory_bin).new; \
|
|
|
|
|
mv $(factory_bin).new $(factory_bin); \
|
|
|
|
|
$(CP) $(factory_bin) $(BIN_DIR)/; \
|
|
|
|
|
else \
|
|
|
|
|
echo "WARNING: initramfs kernel image too big, cannot generate factory image" >&2; \
|
|
|
|
|
fi
|
|
|
|
|
|
|
|
|
|
endef
|
|
|
|
|
|
2018-03-02 18:28:50 +00:00
|
|
|
define Device/avm_fritz300e
|
|
|
|
|
ATH_SOC := ar7242
|
|
|
|
|
DEVICE_TITLE := AVM FRITZ!WLAN Repeater 300E
|
|
|
|
|
KERNEL := kernel-bin | append-dtb | lzma | eva-image
|
|
|
|
|
KERNEL_INITRAMFS := $$(KERNEL)
|
|
|
|
|
IMAGE_SIZE := 15232k
|
|
|
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
|
|
|
|
|
append-squashfs-fakeroot-be | pad-to 256 | \
|
|
|
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
DEVICE_PACKAGES := fritz-tffs rssileds -swconfig
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += avm_fritz300e
|
|
|
|
|
|
ath79: add support for Fritz!Box 4020
This commit adds support for the AVM Fritz!Box 4020 WiFi-router.
SoC: Qualcomm Atheros QCA9561 (Dragonfly) 750MHz
RAM: Winbond W971GG6KB-25
FLASH: Macronix MX25L12835F
WiFi: QCA9561 b/g/n 3x3 450Mbit/s
USB: 1x USB 2.0
IN: WPS button, WiFi button
OUT: Power LED green, Internet LED green, WLAN LED green,
LAN LED green, INFO LED green, INFO LED red
UART: Header Next to Black metal shield
Pinout is 3.3V - RX - TX - GND (Square Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet (LAN + WAN)
- WiFi (correct MAC)
- Installation via EVA bootloader
- OpenWRT sysupgrade
- Buttons
- LEDs
The USB port doesn't work. Both Root Hubs are detected as having 0 Ports:
[ 3.670807] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.723267] usbcore: registered new interface driver usbfs
[ 3.729058] usbcore: registered new interface driver hub
[ 3.734616] usbcore: registered new device driver usb
[ 3.744181] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 3.758357] SCSI subsystem initialized
[ 3.766026] ehci-platform: EHCI generic platform driver
[ 3.771548] ehci-platform ehci-platform.0: EHCI Host Controller
[ 3.777708] ehci-platform ehci-platform.0: new USB bus registered, assigned bus number 1
[ 3.788169] ehci-platform ehci-platform.0: irq 48, io mem 0x1b000000
[ 3.816647] ehci-platform ehci-platform.0: USB 2.0 started, EHCI 0.00
[ 3.824001] hub 1-0:1.0: USB hub found
[ 3.828219] hub 1-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.835825] ehci-platform ehci-platform.1: EHCI Host Controller
[ 3.842009] ehci-platform ehci-platform.1: new USB bus registered, assigned bus number 2
[ 3.852481] ehci-platform ehci-platform.1: irq 49, io mem 0x1b400000
[ 3.886631] ehci-platform ehci-platform.1: USB 2.0 started, EHCI 0.00
[ 3.894011] hub 2-0:1.0: USB hub found
[ 3.898190] hub 2-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 3.908928] usbcore: registered new interface driver usb-storage
[ 3.915634] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
A few words about the shift-register:
AVM used a trick to control the shift-register for the LEDs with only 2
pins, SERCLK and MOSI. Q7S, normally used for daisy-chaining multiple
shift-registers, pulls the latch, moving the shift register-state to
the storage register. It also pulls down MR (normally pulled up) to
clear the storage register, so the latch gets released and will not be
pulled by the remaining bits in the shift-register. Shift register is
all-zero after this.
For that we need to make sure output 7 is set to high on driver probe.
We accomplish this by using gpio-hogging.
Installation via EVA:
In the first seconds after Power is connected, the bootloader will
listen for FTP connections on 169.254.157.1 (Might also be 192.168.178.1).
Firmware can be uploaded like following:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put openwrt-sysupgrade.bin mtd1
Note that this procedure might take up to two minutes. After transfer is
complete you need to powercycle the device to boot OpenWRT.
Signed-off-by: David Bauer <mail@david-bauer.net>
2018-08-18 16:30:46 +00:00
|
|
|
define Device/avm_fritz4020
|
|
|
|
|
ATH_SOC := qca9561
|
|
|
|
|
DEVICE_TITLE := AVM FRITZ!Box 4020
|
|
|
|
|
IMAGE_SIZE := 15232k
|
|
|
|
|
KERNEL := kernel-bin | append-dtb | lzma | eva-image
|
|
|
|
|
KERNEL_INITRAMFS := $$(KERNEL)
|
|
|
|
|
IMAGE/sysupgrade.bin := append-kernel | pad-to 64k | \
|
|
|
|
|
append-squashfs-fakeroot-be | pad-to 256 | \
|
|
|
|
|
append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
DEVICE_PACKAGES := fritz-tffs
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += avm_fritz4020
|
|
|
|
|
|
2018-09-11 11:50:35 +00:00
|
|
|
define Device/buffalo_bhr-4grv
|
|
|
|
|
ATH_SOC := ar7242
|
|
|
|
|
DEVICE_TITLE := Buffalo BHR-4GRV
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
|
|
|
IMAGE_SIZE := 32256k
|
|
|
|
|
IMAGES += factory.bin tftp.bin
|
|
|
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
2018-10-07 11:37:42 +00:00
|
|
|
IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc BHR-4GRV 1.99 | buffalo-tag BHR-4GRV 3
|
2018-09-11 11:50:35 +00:00
|
|
|
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
|
|
|
|
|
SUPPORTED_DEVICES += wzr-hp-g450h
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += buffalo_bhr-4grv
|
|
|
|
|
|
ath79: add support for Buffalo WZR-HP-AG300H
Buffalo WZR-HP-AG300H is a dual band router based on
Qualcom Atheros AR7161 rev 2
Specification:
- 680 MHz CPU (Qualcomm Atheros AR7161)
- 128 MiB RAM (2x Samsung K4H511638G-LCCC)
- 32 MiB Flash (2x Winbond 25Q128BVFG)
- WiFi 5 GHz a/n (Atheros AR9220)
- WiFi 2.4 GHz b/g/n (Atheros AR9223)
- 1000Base-T WAN (Atheros AR7161)
- 4x 1000Base-T Switch (Atheros AR8316)
- 1x USB 2.0
- 3 Buttons (AOSS/WPS, Reset, USB Eject)
- 2 Slide switches (Router (on/off/auto), Movie Engine (on/off))
- 9 LEDs (Power green, WLAN 2GHz green, WLAN 2GHz amber,
WLAN 5GHz green, WLAN 5GHz LED amber, Router green,
Diag red, Movie Engine blue, USB green)
It is already supported by the ar71xx target.
For more information on the device visit the wiki:
<https://openwrt.org/toh/buffalo/wzr-hp-ag300h>
Serial console:
- The UART Header is next to Movie Engine Switch.
- Pinout is RX - TX - GND - 3.3V (Square Pad is 3.3V)
- The Serial setting is 115200-8-N-1.
Installation of OpenWRT from vendor firmware:
- Connect to the Web-interface at http://192.168.11.1
- Go to “Administration” → “Firmware Upgrade”
- Upload the OpenWrt factory image
Tested:
- Ethernet (LAN, WAN)
- WiFi
- Installation
- via TFTP rescue
- via factory image
- on firmware v1.77 (28-05-2012)
- on pro firmware v24SP2 r30356 (26-03-2018)
- via sysupgrade from ar71xx
(wlan devices don't work because of new names)
- via sysupgrade from itself
- Buttons
- LEDS
- USB (Power control and device recognition)
Signed-off-by: Bernhard Frauendienst <openwrt@nospam.obeliks.de>
2018-08-18 16:28:02 +00:00
|
|
|
define Device/buffalo_wzr-hp-ag300h
|
|
|
|
|
ATH_SOC := ar7161
|
|
|
|
|
DEVICE_TITLE := Buffalo WZR-HP-AG300H
|
|
|
|
|
IMAGE_SIZE := 32256k
|
|
|
|
|
IMAGES += factory.bin tftp.bin
|
|
|
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
2018-10-07 11:37:42 +00:00
|
|
|
IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-AG300H 1.99 | buffalo-tag WZR-HP-AG300H 3
|
ath79: add support for Buffalo WZR-HP-AG300H
Buffalo WZR-HP-AG300H is a dual band router based on
Qualcom Atheros AR7161 rev 2
Specification:
- 680 MHz CPU (Qualcomm Atheros AR7161)
- 128 MiB RAM (2x Samsung K4H511638G-LCCC)
- 32 MiB Flash (2x Winbond 25Q128BVFG)
- WiFi 5 GHz a/n (Atheros AR9220)
- WiFi 2.4 GHz b/g/n (Atheros AR9223)
- 1000Base-T WAN (Atheros AR7161)
- 4x 1000Base-T Switch (Atheros AR8316)
- 1x USB 2.0
- 3 Buttons (AOSS/WPS, Reset, USB Eject)
- 2 Slide switches (Router (on/off/auto), Movie Engine (on/off))
- 9 LEDs (Power green, WLAN 2GHz green, WLAN 2GHz amber,
WLAN 5GHz green, WLAN 5GHz LED amber, Router green,
Diag red, Movie Engine blue, USB green)
It is already supported by the ar71xx target.
For more information on the device visit the wiki:
<https://openwrt.org/toh/buffalo/wzr-hp-ag300h>
Serial console:
- The UART Header is next to Movie Engine Switch.
- Pinout is RX - TX - GND - 3.3V (Square Pad is 3.3V)
- The Serial setting is 115200-8-N-1.
Installation of OpenWRT from vendor firmware:
- Connect to the Web-interface at http://192.168.11.1
- Go to “Administration” → “Firmware Upgrade”
- Upload the OpenWrt factory image
Tested:
- Ethernet (LAN, WAN)
- WiFi
- Installation
- via TFTP rescue
- via factory image
- on firmware v1.77 (28-05-2012)
- on pro firmware v24SP2 r30356 (26-03-2018)
- via sysupgrade from ar71xx
(wlan devices don't work because of new names)
- via sysupgrade from itself
- Buttons
- LEDS
- USB (Power control and device recognition)
Signed-off-by: Bernhard Frauendienst <openwrt@nospam.obeliks.de>
2018-08-18 16:28:02 +00:00
|
|
|
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader
|
|
|
|
|
SUPPORTED_DEVICES += wzr-hp-ag300h
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += buffalo_wzr-hp-ag300h
|
|
|
|
|
|
2018-10-02 13:28:45 +00:00
|
|
|
define Device/buffalo_wzr-hp-g302h-a1a0
|
|
|
|
|
ATH_SOC := ar7242
|
|
|
|
|
DEVICE_TITLE := Buffalo WZR-HP-G302H A1A0
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
|
|
|
IMAGE_SIZE := 32128k
|
|
|
|
|
IMAGES += factory.bin tftp.bin
|
|
|
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G302H 1.99 | buffalo-tag WZR-HP-G302H 4
|
|
|
|
|
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
|
|
|
|
|
SUPPORTED_DEVICES += wzr-hp-g300nh2
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += buffalo_wzr-hp-g302h-a1a0
|
|
|
|
|
|
2018-08-02 07:14:10 +00:00
|
|
|
define Device/buffalo_wzr-hp-g450h
|
|
|
|
|
ATH_SOC := ar7242
|
2018-09-11 11:13:17 +00:00
|
|
|
DEVICE_TITLE := Buffalo WZR-HP-G450H/WZR-450HP
|
2018-08-02 07:14:10 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ledtrig-usbport
|
|
|
|
|
IMAGE_SIZE := 32256k
|
2018-09-11 11:13:17 +00:00
|
|
|
IMAGES += factory.bin tftp.bin
|
|
|
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
|
2018-10-07 11:37:42 +00:00
|
|
|
IMAGE/factory.bin := $$(IMAGE/default) | buffalo-enc WZR-HP-G450H 1.99 | buffalo-tag WZR-HP-G450H 3
|
2018-09-11 11:13:17 +00:00
|
|
|
IMAGE/tftp.bin := $$(IMAGE/default) | buffalo-tftp-header
|
2018-08-02 07:14:10 +00:00
|
|
|
SUPPORTED_DEVICES += wzr-hp-g450h
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += buffalo_wzr-hp-g450h
|
|
|
|
|
|
2018-08-09 17:49:29 +00:00
|
|
|
define Device/dlink_dir-825-b1
|
|
|
|
|
ATH_SOC := ar7161
|
|
|
|
|
DEVICE_TITLE := D-LINK DIR-825 B1
|
|
|
|
|
IMAGE_SIZE := 6208k
|
|
|
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader
|
|
|
|
|
SUPPORTED_DEVICES += dir-825-b1
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += dlink_dir-825-b1
|
|
|
|
|
|
2018-09-10 07:30:28 +00:00
|
|
|
define Device/elecom_wrc-300ghbk2-i
|
|
|
|
|
ATH_SOC := qca9563
|
|
|
|
|
DEVICE_TITLE := ELECOM WRC-300GHBK2-I
|
|
|
|
|
IMAGE_SIZE := 7616k
|
|
|
|
|
KERNEL_INITRAMFS := $$(KERNEL) | pad-to 2 | \
|
|
|
|
|
elecom-header 7798706 RN51 WRC-300GHBK2-I \
|
|
|
|
|
$(KDIR)/tmp/$$(KERNEL_INITRAMFS_PREFIX)-factory.bin
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += elecom_wrc-300ghbk2-i
|
|
|
|
|
|
2018-05-08 05:22:38 +00:00
|
|
|
define Device/embeddedwireless_dorin
|
2018-05-06 08:20:11 +00:00
|
|
|
ATH_SOC := ar9331
|
|
|
|
|
DEVICE_TITLE := Embedded Wireless Dorin
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
2018-05-07 19:09:44 +00:00
|
|
|
IMAGE_SIZE := 16000k
|
2018-05-06 08:20:11 +00:00
|
|
|
endef
|
2018-05-08 05:22:38 +00:00
|
|
|
TARGET_DEVICES += embeddedwireless_dorin
|
2018-05-06 08:20:11 +00:00
|
|
|
|
2018-08-02 07:14:10 +00:00
|
|
|
define Device/etactica_eg200
|
2018-05-07 16:08:00 +00:00
|
|
|
ATH_SOC := ar9331
|
|
|
|
|
DEVICE_TITLE := eTactica EG200
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2 kmod-ledtrig-oneshot \
|
|
|
|
|
kmod-usb-serial kmod-usb-serial-ftdi kmod-usb-storage kmod-fs-ext4
|
2018-08-02 07:14:10 +00:00
|
|
|
SUPPORTED_DEVICES += rme-eg200
|
2018-05-07 16:08:00 +00:00
|
|
|
endef
|
2018-08-02 07:14:10 +00:00
|
|
|
TARGET_DEVICES += etactica_eg200
|
2018-05-07 16:08:00 +00:00
|
|
|
|
2018-05-08 05:22:38 +00:00
|
|
|
define Device/glinet_ar150
|
2018-05-06 08:20:11 +00:00
|
|
|
ATH_SOC := ar9330
|
|
|
|
|
DEVICE_TITLE := GL.iNet GL-AR150
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-chipidea2
|
|
|
|
|
IMAGE_SIZE := 16000k
|
2018-05-07 20:41:04 +00:00
|
|
|
SUPPORTED_DEVICES += gl-ar150
|
2018-05-06 08:20:11 +00:00
|
|
|
endef
|
2018-05-08 05:22:38 +00:00
|
|
|
TARGET_DEVICES += glinet_ar150
|
2018-05-06 08:20:11 +00:00
|
|
|
|
2018-05-27 05:37:22 +00:00
|
|
|
define Device/glinet_ar300m_nor
|
|
|
|
|
ATH_SOC := qca9533
|
|
|
|
|
DEVICE_TITLE := GL.iNet GL-AR300M
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2
|
|
|
|
|
IMAGE_SIZE := 16000k
|
|
|
|
|
SUPPORTED_DEVICES += gl-ar300m
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += glinet_ar300m_nor
|
|
|
|
|
|
2018-11-05 02:03:05 +00:00
|
|
|
define Device/glinet_x750
|
|
|
|
|
ATH_SOC := qca9533
|
|
|
|
|
DEVICE_TITLE := GL.iNet GL-ARX750
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k ath10k-firmware-qca9887
|
|
|
|
|
IMAGE_SIZE := 16000k
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += glinet_x750
|
|
|
|
|
|
2018-08-20 07:32:42 +00:00
|
|
|
define Device/iodata_etg3-r
|
|
|
|
|
ATH_SOC := ar9342
|
|
|
|
|
DEVICE_TITLE := I-O DATA ETG3-R
|
|
|
|
|
IMAGE_SIZE := 7680k
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += iodata_etg3-r
|
|
|
|
|
|
2018-08-16 08:08:28 +00:00
|
|
|
define Device/iodata_wn-ac1167dgr
|
|
|
|
|
ATH_SOC := qca9557
|
|
|
|
|
DEVICE_TITLE := I-O DATA WN-AC1167DGR
|
|
|
|
|
IMAGE_SIZE := 14656k
|
|
|
|
|
IMAGES += factory.bin
|
|
|
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
|
|
|
append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
|
|
|
|
|
senao-header -r 0x30a -p 0x61 -t 2
|
2018-09-05 12:51:44 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
2018-08-16 08:08:28 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += iodata_wn-ac1167dgr
|
|
|
|
|
|
2018-08-10 00:07:53 +00:00
|
|
|
define Device/iodata_wn-ac1600dgr2
|
|
|
|
|
ATH_SOC := qca9557
|
|
|
|
|
DEVICE_TITLE := I-O DATA WN-AC1600DGR2
|
|
|
|
|
IMAGE_SIZE := 14656k
|
|
|
|
|
IMAGES += factory.bin
|
|
|
|
|
IMAGE/factory.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \
|
|
|
|
|
append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE) | \
|
|
|
|
|
senao-header -r 0x30a -p 0x60 -t 2 -v 200
|
2018-09-05 12:51:44 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
2018-08-10 00:07:53 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += iodata_wn-ac1600dgr2
|
|
|
|
|
|
2018-08-08 20:13:44 +00:00
|
|
|
define Device/ocedo_koala
|
|
|
|
|
ATH_SOC := qca9558
|
|
|
|
|
DEVICE_TITLE := OCEDO Koala
|
2018-09-05 12:51:44 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct
|
2018-08-08 20:13:44 +00:00
|
|
|
SUPPORTED_DEVICES += koala
|
|
|
|
|
IMAGE_SIZE := 7424k
|
|
|
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += ocedo_koala
|
|
|
|
|
|
2018-07-06 16:23:31 +00:00
|
|
|
define Device/ocedo_raccoon
|
|
|
|
|
ATH_SOC := ar9344
|
|
|
|
|
DEVICE_TITLE := OCEDO Raccoon
|
|
|
|
|
IMAGE_SIZE := 7424k
|
|
|
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += ocedo_raccoon
|
|
|
|
|
|
2018-05-08 05:22:38 +00:00
|
|
|
define Device/openmesh_om5p-ac-v2
|
2018-05-06 08:20:11 +00:00
|
|
|
ATH_SOC := qca9558
|
2018-05-08 05:22:38 +00:00
|
|
|
DEVICE_TITLE := OpenMesh OM5P-AC v2
|
2018-09-05 12:51:44 +00:00
|
|
|
DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca988x-ct om-watchdog
|
2018-05-07 19:09:44 +00:00
|
|
|
IMAGE_SIZE := 7808k
|
2018-05-07 20:41:04 +00:00
|
|
|
SUPPORTED_DEVICES += om5p-acv2
|
2018-05-06 08:20:11 +00:00
|
|
|
endef
|
2018-05-08 05:22:38 +00:00
|
|
|
TARGET_DEVICES += openmesh_om5p-ac-v2
|
2018-05-06 08:20:11 +00:00
|
|
|
|
2018-07-28 12:52:39 +00:00
|
|
|
define Device/pcs_cap324
|
|
|
|
|
ATH_SOC := ar9344
|
|
|
|
|
DEVICE_TITLE := PowerCloud Systems CAP324
|
|
|
|
|
IMAGE_SIZE := 16000k
|
|
|
|
|
IMAGES := sysupgrade.bin
|
|
|
|
|
SUPPORTED_DEVICES += cap324
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += pcs_cap324
|
|
|
|
|
|
2018-07-28 12:57:22 +00:00
|
|
|
define Device/pcs_cr3000
|
|
|
|
|
ATH_SOC := ar9341
|
|
|
|
|
DEVICE_TITLE := PowerCloud Systems CR3000
|
|
|
|
|
IMAGE_SIZE := 7808k
|
|
|
|
|
IMAGES := sysupgrade.bin
|
|
|
|
|
SUPPORTED_DEVICES += cr3000
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += pcs_cr3000
|
|
|
|
|
|
2018-07-20 20:52:46 +00:00
|
|
|
define Device/pcs_cr5000
|
|
|
|
|
ATH_SOC := ar9344
|
|
|
|
|
DEVICE_TITLE := PowerCloud Systems CR5000
|
2018-08-16 07:53:26 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb2 kmod-usb-core
|
2018-07-20 20:52:46 +00:00
|
|
|
IMAGE_SIZE := 7808k
|
|
|
|
|
IMAGES := sysupgrade.bin
|
|
|
|
|
SUPPORTED_DEVICES += cr5000
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += pcs_cr5000
|
|
|
|
|
|
2018-08-11 11:47:21 +00:00
|
|
|
define Device/netgear_wndr3x00
|
2018-05-06 08:20:11 +00:00
|
|
|
ATH_SOC := ar7161
|
2018-05-07 19:09:44 +00:00
|
|
|
KERNEL := kernel-bin | append-dtb | lzma -d20 | netgear-uImage lzma
|
|
|
|
|
IMAGES := sysupgrade.bin factory.img
|
|
|
|
|
IMAGE/default := append-kernel | pad-to $$$$(BLOCKSIZE) | netgear-squashfs | append-rootfs | pad-rootfs
|
2018-05-07 20:41:04 +00:00
|
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
2018-05-07 19:09:44 +00:00
|
|
|
IMAGE/factory.img := $$(IMAGE/default) | netgear-dni | check-size $$$$(IMAGE_SIZE)
|
2018-08-13 20:10:47 +00:00
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb-ohci kmod-usb2 kmod-usb-ledtrig-usbport kmod-leds-reset kmod-owl-loader
|
2018-08-11 11:47:21 +00:00
|
|
|
endef
|
|
|
|
|
|
2018-08-11 22:18:53 +00:00
|
|
|
define Device/netgear_wndr3700
|
|
|
|
|
$(Device/netgear_wndr3x00)
|
|
|
|
|
DEVICE_TITLE := NETGEAR WNDR3700
|
|
|
|
|
NETGEAR_KERNEL_MAGIC := 0x33373030
|
|
|
|
|
NETGEAR_BOARD_ID := WNDR3700
|
|
|
|
|
IMAGE_SIZE := 7680k
|
|
|
|
|
IMAGES += factory-NA.img
|
|
|
|
|
IMAGE/factory-NA.img := $$(IMAGE/default) | netgear-dni NA | check-size $$$$(IMAGE_SIZE)
|
|
|
|
|
SUPPORTED_DEVICES += wndr3700
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += netgear_wndr3700
|
|
|
|
|
|
|
|
|
|
define Device/netgear_wndr3700v2
|
|
|
|
|
$(Device/netgear_wndr3x00)
|
|
|
|
|
DEVICE_TITLE := NETGEAR WNDR3700v2
|
|
|
|
|
NETGEAR_KERNEL_MAGIC := 0x33373031
|
|
|
|
|
NETGEAR_BOARD_ID := WNDR3700v2
|
|
|
|
|
NETGEAR_HW_ID := 29763654+16+64
|
|
|
|
|
IMAGE_SIZE := 15872k
|
|
|
|
|
SUPPORTED_DEVICES += wndr3700v2
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += netgear_wndr3700v2
|
|
|
|
|
|
2018-08-12 14:32:01 +00:00
|
|
|
define Device/pisen_wmm003n
|
|
|
|
|
$(Device/tplink-8mlzma)
|
|
|
|
|
ATH_SOC := ar9331
|
|
|
|
|
DEVICE_TITLE := Pisen WMM003N (Cloud Easy Power)
|
|
|
|
|
DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-chipidea2
|
|
|
|
|
TPLINK_HWID := 0x07030101
|
|
|
|
|
IMAGES := sysupgrade.bin
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += pisen_wmm003n
|
|
|
|
|
|
2018-08-11 11:47:21 +00:00
|
|
|
define Device/netgear_wndr3800
|
|
|
|
|
$(Device/netgear_wndr3x00)
|
|
|
|
|
DEVICE_TITLE := NETGEAR WNDR3800
|
|
|
|
|
NETGEAR_KERNEL_MAGIC := 0x33373031
|
|
|
|
|
NETGEAR_BOARD_ID := WNDR3800
|
|
|
|
|
NETGEAR_HW_ID := 29763654+16+128
|
|
|
|
|
IMAGE_SIZE := 15872k
|
2018-05-07 20:41:04 +00:00
|
|
|
SUPPORTED_DEVICES += wndr3800
|
2018-05-06 08:20:11 +00:00
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += netgear_wndr3800
|
|
|
|
|
|
2018-08-02 07:14:10 +00:00
|
|
|
define Device/phicomm_k2t
|
2018-06-13 13:14:49 +00:00
|
|
|
ATH_SOC := qca9563
|
|
|
|
|
DEVICE_TITLE := Phicomm K2T
|
|
|
|
|
KERNEL := kernel-bin | append-dtb | lzma | uImage lzma
|
|
|
|
|
KERNEL_INITRAMFS := kernel-bin | append-dtb | lzma | uImage lzma
|
|
|
|
|
IMAGE_SIZE := 15744k
|
|
|
|
|
IMAGES := sysupgrade.bin
|
|
|
|
|
IMAGE/default := append-kernel | append-rootfs | pad-rootfs
|
|
|
|
|
IMAGE/sysupgrade.bin := $$(IMAGE/default) | append-metadata | check-size $$$$(IMAGE_SIZE)
|
2018-09-05 12:51:44 +00:00
|
|
|
DEVICE_PACKAGES := kmod-leds-reset kmod-ath10k-ct ath10k-firmware-qca9888-ct
|
2018-06-13 13:14:49 +00:00
|
|
|
endef
|
2018-08-02 07:14:10 +00:00
|
|
|
TARGET_DEVICES += phicomm_k2t
|
2018-09-04 21:27:02 +00:00
|
|
|
|
|
|
|
|
define Device/wd_mynet-wifi-rangeextender
|
|
|
|
|
ATH_SOC := ar9344
|
|
|
|
|
DEVICE_TITLE := Western Digital My Net Wi-Fi Range Extender
|
|
|
|
|
DEVICE_PACKAGES := rssileds nvram -swconfig
|
|
|
|
|
IMAGE_SIZE := 7808k
|
|
|
|
|
ADDPATTERN_ID := mynet-rext
|
|
|
|
|
ADDPATTERN_VERSION := 1.00.01
|
|
|
|
|
IMAGE/sysupgrade.bin := append-rootfs | pad-rootfs | cybertan-trx | \
|
|
|
|
|
addpattern | append-metadata
|
|
|
|
|
SUPPORTED_DEVICES += mynet-rext
|
|
|
|
|
endef
|
|
|
|
|
TARGET_DEVICES += wd_mynet-wifi-rangeextender
|